--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: installation-report: Could not install using netinstall cd when ps/2 keyboard installed in system.
- From: sysop <jame@rocasa.org>
- Date: Sat, 25 Aug 2007 16:22:23 -0400
- Message-id: <20070825202223.16183.60609.reportbug@svrpc.rocasa.net>
Package: installation-reports
Version: 2.29
Severity: normal
The one major problem I had was because the system I was installing
originally had a PS/2 type keyboard; the installation would hang after
or around the point of selecting the keyboard. Connecting a USB
keyboard instead resolved the issue.
Another issue was with LVM; no problem defining a partition as being
LVM. Could create an LV, but could find no way of defining how to it.
Beyond those issues, was able to proceed with the installation with no
other issues that I recall.
-- Package-specific info:
Boot method: CD net install
Image version: netinstall, debian v4.0 amd64 netinst iso
Date: <Date and time of the install>
Machine: HP ML-115
Partitions: <df -Tl will do; the raw partition table is preferred>
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [ ]
Detect network card: [ ]
Configure network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070308)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux svrpc 2.6.18-4-amd64 #1 SMP Wed Feb 21 14:29:38 UTC 2007 x86_64 unknown
lspci -nn: 00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a2)
lspci -nn: 00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0360] (rev a3)
lspci -nn: 00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
lspci -nn: 00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036c] (rev a1)
lspci -nn: 00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036d] (rev a2)
lspci -nn: 00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1)
lspci -nn: 00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3)
lspci -nn: 00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3)
lspci -nn: 00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3)
lspci -nn: 00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev a2)
lspci -nn: 00:0a.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0376] (rev a3)
lspci -nn: 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev a3)
lspci -nn: 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev a3)
lspci -nn: 00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a3)
lspci -nn: 00:0e.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0375] (rev a3)
lspci -nn: 00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a3)
lspci -nn: 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
lspci -nn: 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
lspci -nn: 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
lspci -nn: 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
lspci -nn: 05:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) [102b:0522] (rev 02)
lspci -nn: 06:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express [14e4:1659] (rev 21)
lspci -vnn: 00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a2)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:1714]
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0
lspci -vnn: Capabilities: [44] HyperTransport: Slave or Primary Interface
lspci -vnn: Capabilities: [dc] HyperTransport: MSI Mapping
lspci -vnn:
lspci -vnn: 00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0360] (rev a3)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:1714]
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0
lspci -vnn: I/O ports at 2f00 [size=128]
lspci -vnn:
lspci -vnn: 00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:1714]
lspci -vnn: Flags: 66MHz, fast devsel, IRQ 11
lspci -vnn: I/O ports at e880 [size=64]
lspci -vnn: I/O ports at 2d00 [size=64]
lspci -vnn: I/O ports at 2e00 [size=64]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn:
lspci -vnn: 00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036c] (rev a1) (prog-if 10)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:1714]
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 58
lspci -vnn: Memory at fcfbf000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn:
lspci -vnn: 00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036d] (rev a2) (prog-if 20)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:1714]
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 225
lspci -vnn: Memory at fcfbec00 (32-bit, non-prefetchable) [size=256]
lspci -vnn: Capabilities: [44] Debug port
lspci -vnn: Capabilities: [80] Power Management version 2
lspci -vnn:
lspci -vnn: 00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP])
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:1714]
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0
lspci -vnn: I/O ports at ffa0 [size=16]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn:
lspci -vnn: 00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:1714]
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 225
lspci -vnn: I/O ports at e400 [size=8]
lspci -vnn: I/O ports at e080 [size=4]
lspci -vnn: I/O ports at e000 [size=8]
lspci -vnn: I/O ports at dc00 [size=4]
lspci -vnn: I/O ports at d880 [size=16]
lspci -vnn: Memory at fcfbd000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn: Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
lspci -vnn: Capabilities: [cc] HyperTransport: MSI Mapping
lspci -vnn:
lspci -vnn: 00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:1714]
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 233
lspci -vnn: I/O ports at d800 [size=8]
lspci -vnn: I/O ports at d480 [size=4]
lspci -vnn: I/O ports at d400 [size=8]
lspci -vnn: I/O ports at d080 [size=4]
lspci -vnn: I/O ports at d000 [size=16]
lspci -vnn: Memory at fcfbc000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn: Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
lspci -vnn: Capabilities: [cc] HyperTransport: MSI Mapping
lspci -vnn:
lspci -vnn: 00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:1714]
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 50
lspci -vnn: I/O ports at cc00 [size=8]
lspci -vnn: I/O ports at c880 [size=4]
lspci -vnn: I/O ports at c800 [size=8]
lspci -vnn: I/O ports at c480 [size=4]
lspci -vnn: I/O ports at c400 [size=16]
lspci -vnn: Memory at fcfbb000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn: Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
lspci -vnn: Capabilities: [cc] HyperTransport: MSI Mapping
lspci -vnn:
lspci -vnn: 00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev a2) (prog-if 01)
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
lspci -vnn: Capabilities: [b8] Subsystem: nVidia Corporation Unknown device [10de:cb84]
lspci -vnn: Capabilities: [8c] HyperTransport: MSI Mapping
lspci -vnn:
lspci -vnn: 00:0a.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0376] (rev a3)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
lspci -vnn: Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
lspci -vnn: Capabilities: [48] Power Management version 2
lspci -vnn: Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
lspci -vnn: Capabilities: [60] HyperTransport: MSI Mapping
lspci -vnn: Capabilities: [80] Express Root Port (Slot+) IRQ 0
lspci -vnn:
lspci -vnn: 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev a3)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
lspci -vnn: Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
lspci -vnn: Capabilities: [48] Power Management version 2
lspci -vnn: Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
lspci -vnn: Capabilities: [60] HyperTransport: MSI Mapping
lspci -vnn: Capabilities: [80] Express Root Port (Slot+) IRQ 0
lspci -vnn:
lspci -vnn: 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev a3)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
lspci -vnn: Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
lspci -vnn: Capabilities: [48] Power Management version 2
lspci -vnn: Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
lspci -vnn: Capabilities: [60] HyperTransport: MSI Mapping
lspci -vnn: Capabilities: [80] Express Root Port (Slot+) IRQ 0
lspci -vnn:
lspci -vnn: 00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a3)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
lspci -vnn: Memory behind bridge: fd000000-fdefffff
lspci -vnn: Prefetchable memory behind bridge: 00000000fb000000-00000000fbffffff
lspci -vnn: Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
lspci -vnn: Capabilities: [48] Power Management version 2
lspci -vnn: Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
lspci -vnn: Capabilities: [60] HyperTransport: MSI Mapping
lspci -vnn: Capabilities: [80] Express Root Port (Slot+) IRQ 0
lspci -vnn:
lspci -vnn: 00:0e.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0375] (rev a3)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
lspci -vnn: Memory behind bridge: fdf00000-fdffffff
lspci -vnn: Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
lspci -vnn: Capabilities: [48] Power Management version 2
lspci -vnn: Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
lspci -vnn: Capabilities: [60] HyperTransport: MSI Mapping
lspci -vnn: Capabilities: [80] Express Root Port (Slot+) IRQ 0
lspci -vnn:
lspci -vnn: 00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a3)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
lspci -vnn: Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
lspci -vnn: Capabilities: [48] Power Management version 2
lspci -vnn: Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
lspci -vnn: Capabilities: [60] HyperTransport: MSI Mapping
lspci -vnn: Capabilities: [80] Express Root Port (Slot+) IRQ 0
lspci -vnn:
lspci -vnn: 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
lspci -vnn: Flags: fast devsel
lspci -vnn: Capabilities: [80] HyperTransport: Host or Secondary Interface
lspci -vnn:
lspci -vnn: 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
lspci -vnn: Flags: fast devsel
lspci -vnn:
lspci -vnn: 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
lspci -vnn: Flags: fast devsel
lspci -vnn:
lspci -vnn: 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
lspci -vnn: Flags: fast devsel
lspci -vnn: Capabilities: [f0] #0f [0010]
lspci -vnn:
lspci -vnn: 05:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) [102b:0522] (rev 02)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:31fa]
lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 10
lspci -vnn: Memory at fb000000 (32-bit, prefetchable) [size=16M]
lspci -vnn: Memory at fdefc000 (32-bit, non-prefetchable) [size=16K]
lspci -vnn: Memory at fd000000 (32-bit, non-prefetchable) [size=8M]
lspci -vnn: Expansion ROM at fdee0000 [disabled] [size=64K]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn: Capabilities: [e4] Express Legacy Endpoint IRQ 0
lspci -vnn: Capabilities: [54] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
lspci -vnn:
lspci -vnn: 06:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express [14e4:1659] (rev 21)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:7032]
lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 74
lspci -vnn: Memory at fdff0000 (64-bit, non-prefetchable) [size=64K]
lspci -vnn: Capabilities: [48] Power Management version 2
lspci -vnn: Capabilities: [50] Vital Product Data
lspci -vnn: Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+
lspci -vnn: Capabilities: [d0] Express Endpoint IRQ 0
lspci -vnn:
modulemap: 10de:036c ohci_hcd
modulemap: 10de:036d ehci_hcd
modulemap: 10de:036e amd74xx
modulemap: 10de:037f sata_nv
modulemap: 10de:037f sata_nv
modulemap: 10de:037f sata_nv
modulemap: 14e4:1659 tg3
lsmod: Module Size Used by
lsmod: qnx4 16840 0
lsmod: ntfs 190728 0
lsmod: dm_mod 62800 0
lsmod: xfs 485192 0
lsmod: reiserfs 231168 0
lsmod: jfs 166992 0
lsmod: ext3 138512 2
lsmod: jbd 65392 1 ext3
lsmod: mbcache 14216 1 ext3
lsmod: vfat 17792 0
lsmod: fat 55984 1 vfat
lsmod: tg3 108292 0
lsmod: nls_iso8859_1 9472 2
lsmod: isofs 39396 0
lsmod: ide_disk 20352 0
lsmod: ide_generic 5632 0 [permanent]
lsmod: pdc202xx_new 13312 0 [permanent]
lsmod: aec62xx 12288 0 [permanent]
lsmod: alim15x3 16152 0 [permanent]
lsmod: atiixp 11024 0 [permanent]
lsmod: cmd64x 15308 0 [permanent]
lsmod: cs5520 9472 0 [permanent]
lsmod: cs5530 9984 0 [permanent]
lsmod: cy82c693 9096 0 [permanent]
lsmod: hpt34x 9856 0 [permanent]
lsmod: it821x 12932 0 [permanent]
lsmod: jmicron 9088 0 [permanent]
lsmod: ns87415 8904 0 [permanent]
lsmod: opti621 9220 0 [permanent]
lsmod: pdc202xx_old 14848 0 [permanent]
lsmod: piix 15236 0 [permanent]
lsmod: rz1000 7296 0 [permanent]
lsmod: sc1200 11520 0 [permanent]
lsmod: serverworks 13456 0 [permanent]
lsmod: siimage 16640 0 [permanent]
lsmod: sis5513 18192 0 [permanent]
lsmod: slc90e66 10112 0 [permanent]
lsmod: triflex 8448 0 [permanent]
lsmod: trm290 8836 0 [permanent]
lsmod: via82cxxx 13188 0 [permanent]
lsmod: usb_storage 86848 0
lsmod: vga16fb 16280 2
lsmod: vgastate 12416 1 vga16fb
lsmod: usbserial 38640 0
lsmod: usbkbd 11776 0
lsmod: thermal 19984 0
lsmod: processor 37608 1 thermal
lsmod: fan 9608 0
lsmod: ide_cd 44704 0
lsmod: cdrom 40104 1 ide_cd
lsmod: sd_mod 25600 3
lsmod: amd74xx 19248 0 [permanent]
lsmod: generic 11140 0 [permanent]
lsmod: ide_core 146816 30 ide_disk,ide_generic,pdc202xx_new,aec62xx,alim15x3,atiixp,cmd64x,cs5520,cs5530,cy82c693,hpt34x,it821x,jmicron,ns87415,opti621,pdc202xx_old,piix,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,amd74xx,generic
lsmod: ehci_hcd 35720 0
lsmod: ohci_hcd 24452 0
lsmod: sata_nv 17028 2
lsmod: libata 106272 1 sata_nv
lsmod: scsi_mod 151984 3 usb_storage,sd_mod,libata
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 2282500 412 2282088 0% /dev
df: tmpfs 2282500 412 2282088 0% /dev
df: tmpfs 2282500 412 2282088 0% /.dev
df: /dev/scsi/host0/bus0/target0/lun0/part2 15377852 2541060 12055632 17% /target
df: /dev/scsi/host0/bus0/target0/lun0/part1 124427 13788 104215 12% /target/boot
free: total used free shared buffers
free: Mem: 4565004 2742340 1822664 0 124564
free: Swap: 0 0 0
free: Total: 4565004 2742340 1822664
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : AuthenticAMD
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 67
/proc/cpuinfo: model name : Dual-Core AMD Opteron(tm) Processor 1214
/proc/cpuinfo: stepping : 2
/proc/cpuinfo: cpu MHz : 2200.315
/proc/cpuinfo: cache size : 1024 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 2
/proc/cpuinfo: core id : 0
/proc/cpuinfo: cpu cores : 2
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 1
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8_legacy
/proc/cpuinfo: bogomips : 4404.89
/proc/cpuinfo: TLB size : 1024 4K pages
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 40 bits physical, 48 bits virtual
/proc/cpuinfo: power management: ts fid vid ttp tm stc
/proc/cpuinfo:
/proc/cpuinfo: processor : 1
/proc/cpuinfo: vendor_id : AuthenticAMD
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 67
/proc/cpuinfo: model name : Dual-Core AMD Opteron(tm) Processor 1214
/proc/cpuinfo: stepping : 2
/proc/cpuinfo: cpu MHz : 2200.315
/proc/cpuinfo: cache size : 1024 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 2
/proc/cpuinfo: core id : 1
/proc/cpuinfo: cpu cores : 2
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 1
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8_legacy
/proc/cpuinfo: bogomips : 4399.99
/proc/cpuinfo: TLB size : 1024 4K pages
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 40 bits physical, 48 bits virtual
/proc/cpuinfo: power management: ts fid vid ttp tm stc
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0070-0077 : rtc
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0a00-0a7f : pnp 00:09
/proc/ioports: 0a80-0a83 : pnp 00:09
/proc/ioports: 0a84-0a85 : pnp 00:09
/proc/ioports: 0a86-0a8d : pnp 00:09
/proc/ioports: 0a90-0a9f : pnp 00:09
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 2000-207f : motherboard
/proc/ioports: 2000-2003 : ACPI PM1a_EVT_BLK
/proc/ioports: 2004-2005 : ACPI PM1a_CNT_BLK
/proc/ioports: 2008-200b : ACPI PM_TMR
/proc/ioports: 2010-2015 : ACPI CPU throttle
/proc/ioports: 2020-2027 : ACPI GPE0_BLK
/proc/ioports: 2080-20ff : motherboard
/proc/ioports: 2400-247f : motherboard
/proc/ioports: 2480-24ff : motherboard
/proc/ioports: 24a0-24af : ACPI GPE1_BLK
/proc/ioports: 2800-287f : motherboard
/proc/ioports: 2880-28ff : motherboard
/proc/ioports: 2c00-2c7f : motherboard
/proc/ioports: 2c80-2cff : motherboard
/proc/ioports: 2d00-2d3f : 0000:00:01.1
/proc/ioports: 2e00-2e3f : 0000:00:01.1
/proc/ioports: 2f00-2f7f : 0000:00:01.0
/proc/ioports: c400-c40f : 0000:00:05.2
/proc/ioports: c400-c40f : sata_nv
/proc/ioports: c480-c483 : 0000:00:05.2
/proc/ioports: c480-c483 : sata_nv
/proc/ioports: c800-c807 : 0000:00:05.2
/proc/ioports: c800-c807 : sata_nv
/proc/ioports: c880-c883 : 0000:00:05.2
/proc/ioports: c880-c883 : sata_nv
/proc/ioports: cc00-cc07 : 0000:00:05.2
/proc/ioports: cc00-cc07 : sata_nv
/proc/ioports: d000-d00f : 0000:00:05.1
/proc/ioports: d000-d00f : sata_nv
/proc/ioports: d080-d083 : 0000:00:05.1
/proc/ioports: d080-d083 : sata_nv
/proc/ioports: d400-d407 : 0000:00:05.1
/proc/ioports: d400-d407 : sata_nv
/proc/ioports: d480-d483 : 0000:00:05.1
/proc/ioports: d480-d483 : sata_nv
/proc/ioports: d800-d807 : 0000:00:05.1
/proc/ioports: d800-d807 : sata_nv
/proc/ioports: d880-d88f : 0000:00:05.0
/proc/ioports: d880-d88f : sata_nv
/proc/ioports: dc00-dc03 : 0000:00:05.0
/proc/ioports: dc00-dc03 : sata_nv
/proc/ioports: e000-e007 : 0000:00:05.0
/proc/ioports: e000-e007 : sata_nv
/proc/ioports: e080-e083 : 0000:00:05.0
/proc/ioports: e080-e083 : sata_nv
/proc/ioports: e400-e407 : 0000:00:05.0
/proc/ioports: e400-e407 : sata_nv
/proc/ioports: e880-e8bf : 0000:00:01.1
/proc/ioports: ffa0-ffaf : 0000:00:04.0
/proc/ioports: ffa0-ffa7 : ide0
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-dffeffff : System RAM
/proc/iomem: 00200000-003e2b08 : Kernel code
/proc/iomem: 003e2b09-004bbd47 : Kernel data
/proc/iomem: dfff0000-dfffdfff : ACPI Tables
/proc/iomem: dfffe000-dfffffff : ACPI Non-volatile Storage
/proc/iomem: fb000000-fbffffff : PCI Bus #05
/proc/iomem: fb000000-fbffffff : 0000:05:00.0
/proc/iomem: fcfbb000-fcfbbfff : 0000:00:05.2
/proc/iomem: fcfbb000-fcfbbfff : sata_nv
/proc/iomem: fcfbc000-fcfbcfff : 0000:00:05.1
/proc/iomem: fcfbc000-fcfbcfff : sata_nv
/proc/iomem: fcfbd000-fcfbdfff : 0000:00:05.0
/proc/iomem: fcfbd000-fcfbdfff : sata_nv
/proc/iomem: fcfbec00-fcfbecff : 0000:00:02.1
/proc/iomem: fcfbec00-fcfbecff : ehci_hcd
/proc/iomem: fcfbf000-fcfbffff : 0000:00:02.0
/proc/iomem: fcfbf000-fcfbffff : ohci_hcd
/proc/iomem: fd000000-fdefffff : PCI Bus #05
/proc/iomem: fd000000-fd7fffff : 0000:05:00.0
/proc/iomem: fdee0000-fdeeffff : 0000:05:00.0
/proc/iomem: fdefc000-fdefffff : 0000:05:00.0
/proc/iomem: fdf00000-fdffffff : PCI Bus #06
/proc/iomem: fdff0000-fdffffff : 0000:06:00.0
/proc/iomem: fdff0000-fdffffff : tg3
/proc/iomem: fec00000-fec00fff : reserved
/proc/iomem: fee00000-feefffff : reserved
/proc/iomem: ff780000-ffffffff : reserved
/proc/iomem: 100000000-13fffffff : System RAM
/proc/interrupts: CPU0 CPU1
/proc/interrupts: 0: 1201563 0 IO-APIC-edge timer
/proc/interrupts: 8: 1 0 IO-APIC-edge rtc
/proc/interrupts: 9: 0 0 IO-APIC-level acpi
/proc/interrupts: 14: 2072 0 IO-APIC-edge ide0
/proc/interrupts: 50: 0 0 IO-APIC-level libata
/proc/interrupts: 58: 10528 0 IO-APIC-level ohci_hcd:usb1
/proc/interrupts: 74: 515349 0 PCI-MSI eth0
/proc/interrupts: 225: 78499 0 IO-APIC-level libata, ehci_hcd:usb2
/proc/interrupts: 233: 0 0 IO-APIC-level libata
/proc/interrupts: NMI: 302 183
/proc/interrupts: LOC: 1201323 1201296
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 4565004 kB
/proc/meminfo: MemFree: 1822624 kB
/proc/meminfo: Buffers: 124564 kB
/proc/meminfo: Cached: 2370500 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 1621792 kB
/proc/meminfo: Inactive: 898864 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 4565004 kB
/proc/meminfo: LowFree: 1822624 kB
/proc/meminfo: SwapTotal: 0 kB
/proc/meminfo: SwapFree: 0 kB
/proc/meminfo: Dirty: 1556 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 25428 kB
/proc/meminfo: Mapped: 2044 kB
/proc/meminfo: Slab: 201360 kB
/proc/meminfo: PageTables: 356 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 2282500 kB
/proc/meminfo: Committed_AS: 30512 kB
/proc/meminfo: VmallocTotal: 34359738367 kB
/proc/meminfo: VmallocUsed: 6312 kB
/proc/meminfo: VmallocChunk: 34359732019 kB
/proc/bus/input/devices: I: Bus=0003 Vendor=05a4 Product=9860 Version=0110
/proc/bus/input/devices: N: Name="ORTEK USB Keyboard Hub"
/proc/bus/input/devices: P: Phys=/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120003
/proc/bus/input/devices: B: KEY=7 ff87207ac14057ff febeffdfffefffff fffffffffffffffe
/proc/bus/input/devices: B: LED=1f
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.4 present.
dmidecode: 49 structures occupying 1628 bytes.
dmidecode: Table at 0x000FACC0.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 24 bytes
dmidecode: BIOS Information
dmidecode: Vendor: HP
dmidecode: Version: O11
dmidecode: Release Date: 12/29/2006
dmidecode: Address: 0xF0000
dmidecode: Runtime Size: 64 kB
dmidecode: ROM Size: 512 kB
dmidecode: Characteristics:
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: ESCD support is available
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: BIOS ROM is socketed
dmidecode: EDD is supported
dmidecode: Print screen service is supported (int 5h)
dmidecode: Serial services are supported (int 14h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: BIOS boot specification is supported
dmidecode: Function key-initiated network boot is supported
dmidecode: BIOS Revision: 8.14
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 27 bytes
dmidecode: System Information
dmidecode: Manufacturer: HP
dmidecode: Product Name: ProLiant ML115 G1
dmidecode: Version: 1.0
dmidecode: Serial Number: 2UX704044T
dmidecode: UUID: 07C29C88-1F6D-1DD2-11B2-0019BBD14677
dmidecode: Wake-up Type: Power Switch
dmidecode: SKU Number: 437289-001
dmidecode: Family: ProLiant Server
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 15 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: HP
dmidecode: Product Name: ProLiant ML115 G1
dmidecode: Version:
dmidecode: Serial Number:
dmidecode: Asset Tag:
dmidecode: Features:
dmidecode: Board is a hosting board
dmidecode: Board is replaceable
dmidecode: Location In Chassis: N/A
dmidecode: Chassis Handle: 0x0003
dmidecode: Type: Motherboard
dmidecode: Contained Object Handles: 0
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 21 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: HP
dmidecode: Type: Tower
dmidecode: Lock: Not Present
dmidecode: Version: 1.0
dmidecode: Serial Number: 2UX704044T
dmidecode: Asset Tag: svrpc
dmidecode: Boot-up State: Safe
dmidecode: Power Supply State: Safe
dmidecode: Thermal State: Safe
dmidecode: Security Status: None
dmidecode: OEM Information: 0x00000000
dmidecode: Heigth: Unspecified
dmidecode: Number Of Power Cords: 1
dmidecode: Contained Elements: 0
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 35 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: PROCESSOR
dmidecode: Type: Central Processor
dmidecode: Family: Opteron
dmidecode: Manufacturer: AMD
dmidecode: ID: 32 0F 04 00 FF FB 8B 17
dmidecode: Signature: Extended Family 0, Model 3, Stepping 2
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: CLFSH (CLFLUSH instruction supported)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: SSE2 (Streaming SIMD extensions 2)
dmidecode: HTT (Hyper-threading technology)
dmidecode: Version: Dual-Core AMD Opteron(tm) Processor 1214
dmidecode: Voltage: 1.5 V
dmidecode: External Clock: 800 MHz
dmidecode: Max Speed: 2200 MHz
dmidecode: Current Speed: 2200 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: Other
dmidecode: L1 Cache Handle: 0x0005
dmidecode: L2 Cache Handle: 0x0006
dmidecode: L3 Cache Handle: 0x0007
dmidecode: Serial Number: To Be Filled By O.E.M.
dmidecode: Asset Tag: To Be Filled By O.E.M.
dmidecode: Part Number: To Be Filled By O.E.M.
dmidecode:
dmidecode: Handle 0x0005, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L1-Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 128 KB
dmidecode: Maximum Size: 128 KB
dmidecode: Supported SRAM Types:
dmidecode: Unknown
dmidecode: Installed SRAM Type: Unknown
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Data
dmidecode: Associativity: 2-way Set-associative
dmidecode:
dmidecode: Handle 0x0006, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L2-Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 2048 KB
dmidecode: Maximum Size: 2048 KB
dmidecode: Supported SRAM Types:
dmidecode: Unknown
dmidecode: Installed SRAM Type: Unknown
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Unified
dmidecode: Associativity: 16-way Set-associative
dmidecode:
dmidecode: Handle 0x0007, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L3-Cache
dmidecode: Configuration: Disabled, Not Socketed, Level 3
dmidecode: Operational Mode: Unknown
dmidecode: Location: Internal
dmidecode: Installed Size: 0 KB
dmidecode: Maximum Size: 0 KB
dmidecode: Supported SRAM Types:
dmidecode: Unknown
dmidecode: Installed SRAM Type: Unknown
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x0008, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CNN1A
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: COM 1
dmidecode: External Connector Type: DB-9 female
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x0009, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CNN1B
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Video
dmidecode: External Connector Type: DB-15 male
dmidecode: Port Type: Video Port
dmidecode:
dmidecode: Handle 0x000A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J68
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: PS/2 Keyboard
dmidecode: External Connector Type: Circular DIN-8 male
dmidecode: Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x000B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J68
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: PS/2 Mouse
dmidecode: External Connector Type: Circular DIN-8 male
dmidecode: Port Type: Mouse Port
dmidecode:
dmidecode: Handle 0x000C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J19
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: LAN
dmidecode: External Connector Type: RJ-45
dmidecode: Port Type: Network Port
dmidecode:
dmidecode: Handle 0x000D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J19
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB1
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x000E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J19
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB2
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x000F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CN8
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB3
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0010, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CN8
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB4
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0011, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: 00
dmidecode: Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
dmidecode: External Reference Designator: FRNTUSB1
dmidecode: External Connector Type: None
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0012, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: 00
dmidecode: Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
dmidecode: External Reference Designator: FRNTUSB2
dmidecode: External Connector Type: None
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0013, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: INT1 USB
dmidecode: Internal Connector Type: Access Bus (USB)
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0014, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: INT2 USB
dmidecode: Internal Connector Type: Access Bus (USB)
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0015, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0016, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: System Fan
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0017, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CPU Fan
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0018, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SATA1
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0019, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SATA2
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x001A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SATA3
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x001B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SATA4
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x001C, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: SLOT1 PCI J6
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 1
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Hot-plug devices are supported
dmidecode: SMBus signal is supported
dmidecode:
dmidecode: Handle 0x001D, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: SLOT2 PCI J7
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 2
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Hot-plug devices are supported
dmidecode: SMBus signal is supported
dmidecode:
dmidecode: Handle 0x001E, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: SLOT3 PCI-E x8 J8
dmidecode: Type: x8 PCI Express
dmidecode: Current Usage: Available
dmidecode: Length: Other
dmidecode: Characteristics: Unknown
dmidecode:
dmidecode: Handle 0x001F, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: SLOT4 PCI-E x16 J9
dmidecode: Type: x16 PCI Express
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: Characteristics: Unknown
dmidecode:
dmidecode: Handle 0x0020, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 1
dmidecode: en|US|iso8859-1
dmidecode: Currently Installed Language: en|US|iso8859-1
dmidecode:
dmidecode: Handle 0x0021, DMI type 15, 55 bytes
dmidecode: System Event Log
dmidecode: Area Length: 1008 bytes
dmidecode: Header Start Offset: 0x1810
dmidecode: Data Start Offset: 0x1810
dmidecode: Access Method: General-purpose non-volatile data functions
dmidecode: Access Address: 0x0002
dmidecode: Status: Valid, Not Full
dmidecode: Change Token: 0x00000000
dmidecode: Header Format: No Header
dmidecode: Supported Log Type Descriptors: 9
dmidecode: Descriptor 1: Single-bit ECC memory error
dmidecode: Data Format 1: Multiple-event handle
dmidecode: Descriptor 2: Multi-bit ECC memory error
dmidecode: Data Format 2: Multiple-event handle
dmidecode: Descriptor 3: Parity memory error
dmidecode: Data Format 3: Multiple-event
dmidecode: Descriptor 4: I/O channel block
dmidecode: Data Format 4: Multiple-event
dmidecode: Descriptor 5: POST error
dmidecode: Data Format 5: POST results bitmap
dmidecode: Descriptor 6: PCI parity error
dmidecode: Data Format 6: Multiple-event handle
dmidecode: Descriptor 7: PCI system error
dmidecode: Data Format 7: Multiple-event handle
dmidecode: Descriptor 8: System limit exceeded
dmidecode: Data Format 8: Multiple-event system management
dmidecode: Descriptor 9: OEM-specific
dmidecode: Data Format 9: POST results bitmap
dmidecode:
dmidecode: Handle 0x0022, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: Maximum Capacity: 8 GB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 4
dmidecode:
dmidecode: Handle 0x0023, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0013FFFFFFF
dmidecode: Range Size: 5 GB
dmidecode: Physical Array Handle: 0x0022
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x0024, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0022
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM1
dmidecode: Bank Locator: Not Specified
dmidecode: Type: DDR2
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 667 MHz (1.5 ns)
dmidecode: Manufacturer: AD00000000000000
dmidecode: Serial Number: 26210000
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: HYMP564U72CP8-Y5
dmidecode:
dmidecode: Handle 0x0025, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x0024
dmidecode: Memory Array Mapped Address Handle: 0x0023
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0026, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0022
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 2048 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM2
dmidecode: Bank Locator: Not Specified
dmidecode: Type: DDR2
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 667 MHz (1.5 ns)
dmidecode: Manufacturer: 2C00000000000000
dmidecode: Serial Number: BA441CD2
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: 18HTF25672AY-667E1
dmidecode:
dmidecode: Handle 0x0027, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00020000000
dmidecode: Ending Address: 0x0009FFFFFFF
dmidecode: Range Size: 2 GB
dmidecode: Physical Device Handle: 0x0026
dmidecode: Memory Array Mapped Address Handle: 0x0023
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0028, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0022
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM3
dmidecode: Bank Locator: Not Specified
dmidecode: Type: Unknown
dmidecode: Type Detail: Unknown
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Not Specified
dmidecode: Serial Number: Not Specified
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: Not Specified
dmidecode:
dmidecode: Handle 0x0029, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x0028
dmidecode: Memory Array Mapped Address Handle: 0x0023
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x002A, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0022
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 2048 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM4
dmidecode: Bank Locator: Not Specified
dmidecode: Type: DDR2
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 667 MHz (1.5 ns)
dmidecode: Manufacturer: 2C00000000000000
dmidecode: Serial Number: E1441CD2
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: 18HTF25672AY-667E1
dmidecode:
dmidecode: Handle 0x002B, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x000A0000000
dmidecode: Ending Address: 0x0011FFFFFFF
dmidecode: Range Size: 2 GB
dmidecode: Physical Device Handle: 0x002A
dmidecode: Memory Array Mapped Address Handle: 0x0023
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x002C, DMI type 32, 20 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x002D, DMI type 38, 18 bytes
dmidecode: IPMI Device Information
dmidecode: Interface Type: KCS (Keyboard Control Style)
dmidecode: Specification Version: 2.0
dmidecode: I2C Slave Address: 0x10
dmidecode: NV Storage Device: Not Present
dmidecode: Base Address: 0x0000000000000CA2 (I/O)
dmidecode: Register Spacing: Successive Byte Boundaries
dmidecode:
dmidecode: Handle 0x002E, DMI type 208, 5 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D0 05 2E 00 00
dmidecode:
dmidecode: Handle 0x002F, DMI type 209, 12 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D1 0C 2F 00 00 06 00 19 BB D1 46 77
dmidecode:
dmidecode: Handle 0x0030, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: cdrom-core-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: cdrom-core-modules
Depends: kernel-image-2.6.18-4-amd64-di, scsi-core-modules-2.6.18-4-amd64-di, ide-modules-2.6.18-4-amd64-di
Description: CDROM support
Package: floppy-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: floppy-modules
Depends: kernel-image-2.6.18-4-amd64-di
Description: Floppy driver
Package: scsi-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: scsi-modules
Depends: kernel-image-2.6.18-4-amd64-di, scsi-core-modules-2.6.18-4-amd64-di, scsi-common-modules-2.6.18-4-amd64-di, parport-modules-2.6.18-4-amd64-di, cdrom-core-modules-2.6.18-4-amd64-di, firmware-modules-2.6.18-4-amd64-di
Description: SCSI drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: parport-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: parport-modules
Depends: kernel-image-2.6.18-4-amd64-di
Description: Parallel port support
Package: localechooser
Status: install ok installed
Version: 1.37
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.11
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.25
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.18
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.45
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: firmware-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: firmware-modules
Depends: kernel-image-2.6.18-4-amd64-di
Description: Firmware request modules
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: scsi-common-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: scsi-common-modules
Depends: kernel-image-2.6.18-4-amd64-di, scsi-core-modules-2.6.18-4-amd64-di, cdrom-core-modules-2.6.18-4-amd64-di
Description: Very common SCSI drivers
Package: ide-core-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: ide-core-modules
Depends: kernel-image-2.6.18-4-amd64-di
Description: IDE support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-2
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules
Package: scsi-core-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-4-amd64-di
Description: Core SCSI subsystem
Package: rootskel
Status: install ok installed
Version: 1.50
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: udev-udeb
Status: install ok unpacked
Version: 0.105-3
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-7
Depends: libc6 (>= 2.3.5-1)
Description: Access software for a blind person using a soft braille terminal
Package: usb-serial-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-4-amd64-di, usb-modules-2.6.18-4-amd64-di
Description: USB serial drivers
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.5-1)
Description: text-wrapping library with i18n - runtime udeb
Package: auto-install
Status: install ok unpacked
Version: 0.03
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.9
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.2-1
Provides: editor
Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.114
Provides: debconf-2.0
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.49), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.03
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: pcmcia-storage-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.18-4-amd64-di, ide-core-modules-2.6.18-4-amd64-di, cdrom-core-modules-2.6.18-4-amd64-di, pcmcia-modules-2.6.18-4-amd64-di
Description: PCMCIA storage drivers
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: load-cdrom
Status: install ok installed
Version: 1.14
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, libc6 (>= 2.3.5-1)
Description: Plain text frontend for Debian Configuration Management System
Package: usb-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: usb-modules
Depends: kernel-image-2.6.18-4-amd64-di
Description: USB support
Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file
Package: floppy-retriever
Status: install ok unpacked
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.50
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-4
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.28
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.50
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.49)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.29
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: input-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: input-modules
Depends: kernel-image-2.6.18-4-amd64-di, usb-modules-2.6.18-4-amd64-di
Description: Input devices support
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.27
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: sata-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: sata-modules
Depends: kernel-image-2.6.18-4-amd64-di, scsi-core-modules-2.6.18-4-amd64-di
Description: SATA drivers
Package: kernel-image-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.5-1)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.5-1), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.5-1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-7
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.45
Description: Terminfo entries needed by newt/slang in debian installer
Package: hw-detect
Status: install ok installed
Version: 1.50
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.34
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.49), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.50
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions
Package: serial-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: serial-modules
Depends: kernel-image-2.6.18-4-amd64-di, pcmcia-modules-2.6.18-4-amd64-di
Description: Serial drivers
Package: fb-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: fb-modules
Depends: kernel-image-2.6.18-4-amd64-di
Description: Frame buffer support
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.28
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.11
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.36
Provides: configured-network
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.49), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: file-preseed
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: acpi-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: acpi-modules
Depends: kernel-image-2.6.18-4-amd64-di
Description: ACPI support modules
Package: usb-storage-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.18-4-amd64-di, scsi-core-modules-2.6.18-4-amd64-di, usb-modules-2.6.18-4-amd64-di
Description: USB storage support
Package: ide-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: ide-modules
Depends: kernel-image-2.6.18-4-amd64-di, ide-core-modules-2.6.18-4-amd64-di
Description: IDE drivers
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.114
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: fat-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: fat-modules
Depends: kernel-image-2.6.18-4-amd64-di
Description: FAT filesystem support
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: firewire-core-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-4-amd64-di, kernel-image-2.6.18-4-amd64-di
Description: Core FireWire drivers
Package: pcmcia-modules-2.6.18-4-amd64-di
Status: install ok unpacked
Version: 1.21
Provides: pcmcia-modules
Depends: kernel-image-2.6.18-4-amd64-di, firmware-modules-2.6.18-4-amd64-di
Description: Common PCMCIA drivers
Package: cdrom-detect
Status: install ok installed
Version: 1.20
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20070308
Description: debian installation image
Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 108
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This minimal package includes the shared library
for use with the Debian installer.
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 632
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.76
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.13
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.15
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 200
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.2
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 160
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.5
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.45
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.49)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.50
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 76
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-4
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: ext3-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 368
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 168
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-19
Depends: libc6 (>= 2.3.5-1)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.9
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: gpgv-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 292
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.6-2
Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1)
Description: minimal signature verification tool
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG's signature verification tool, gpgv, packaged in minimal
form for use in debian-installer.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 376
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.22
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1004
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 48
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 2132
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-13
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 84
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.5-1)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 352
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 472
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-4
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 592
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 184
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-9
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 412
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 3160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di, nic-shared-modules-2.6.18-4-amd64-di, firmware-modules-2.6.18-4-amd64-di, crc-modules-2.6.18-4-amd64-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 620
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di, nic-shared-modules-2.6.18-4-amd64-di, firmware-modules-2.6.18-4-amd64-di, firewire-core-modules-2.6.18-4-amd64-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 788
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di, nic-shared-modules-2.6.18-4-amd64-di, nic-extra-modules-2.6.18-4-amd64-di, pcmcia-modules-2.6.18-4-amd64-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 296
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di, nic-shared-modules-2.6.18-4-amd64-di, usb-modules-2.6.18-4-amd64-di, firmware-modules-2.6.18-4-amd64-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-6+b2
Depends: libc6 (>= 2.3.5-1)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.49), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 76
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 692
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 68
Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 164
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 22
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 888
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 105
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 884
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20
Depends: partman-base (>= 87), libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 21
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 35
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 352
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1928
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: scsi-modules-2.6.18-4-amd64-di, scsi-core-modules-2.6.18-4-amd64-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 360
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 696
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 272
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.18-4-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 56
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.18-4-amd64-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-5-vserver-amd64
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii pciutils 1:2.2.4~pre4-1 Linux PCI Utilities
ii reportbug 3.31 reports bugs in the Debian distrib
-- no debconf information
--- End Message ---