--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: debian-installer: fails to detect existing LVM
- From: Sander Marechal <s.marechal@jejik.com>
- Date: Fri, 23 Mar 2007 14:24:46 +0100
- Message-id: <20070323132446.8298.18322.reportbug@sylvester.jejik.com>
- Reply-to: Sander Marechal <s.marechal@jejik.com>
Package: installation-reports
Version: etch
Severity: normal
-- Package-specific info:
Boot method: CD
Image version: debian netinst RC2 built March 17, 2007
Date: March 23, 2007 13:00 CET
Machine: HP ProLiant ML370 G3 Dual Xeon
Partitions: <df -Tl will do; the raw partition table is preferred>
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/mapper/dom0_vg-simple_root
ext3 5160576 578796 4319636 12% /
tmpfs tmpfs 518296 0 518296 0% /lib/init/rw
udev tmpfs 10240 52 10188 1% /dev
tmpfs tmpfs 518296 0 518296 0% /dev/shm
/dev/cciss/c0d0p3
ext3 116661 12745 97892 12% /boot
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [E]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [E]
Overall install: [O]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
Installation went fine until the partitioner came up (I selected manual). It failed to detect my existing LVM. The option to comfigure LVM was not
present. I tried to mark the existing LVM PV partitions as "use for PV for LVM" and then the option to configure LVM appeared. When I selected that
option it indcated that my partition table had changed and that it wanted to write the changes to disk first. Here I chickened out because I was
unsure if merely marking existing PV's as "use as PV" would destroy the existing LVM or simply find the LVM already on my system. Someone with a test
machine with no valuable data should try that out sometime. I managed to work around it:
* switch to console #2
* execute "modprobe md-mad", "vgscan", "vgchange -ay"
* switch back to the installer
* Back out and start from "detect hard drives"
Now my LVM was found but the "Manage LVM" option still did not appear, so I could not create new LV's to install in. Workaround:
* switch back to console #2
* create new LV's with lvcreate
* switch back to installer
* back out and resume from "detect hard drives"
Now I was able to specify mount points for everything and continue the install.
Annoyance: When you ever have to use the <go back> option in the installer, afterwards it starts asking all the "expert" questions. Which is why I
ran into the next problem: GRUB. I got the expert option for GRUB and I was clueless what I should specify to install into my MBR. I don't use
hardware RAID SCSI everyday :-) It took me a bit of googling to figure out I needed /dev/cciss/c0d0. BTW the annoyance with expert questions was
patched witin 5 minutes after mentioning it in #debian-boot by cjwatson. Talk about fast patch times :-)
The next problem occured after rebooting. I was staring at the old GRUB install instead of the new one. I had to edit an old entry manually to boot.
A grub-install /dev/cciss/c0d0 to resolve the iussue didn't work. vorlon on IRC mentioned bug #414161 and after applying the patch that the author
suggested, GRUB installed correctly and a subsequent reboot showed the new GRUB menu. GRUB did not detect my old Xen install, only my old Etch
install, but that's a known "feature" apparently.
All in all, a fair share of troubles but I managed to work around in all thanks to the #debian-boot people.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070308)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux sylvester 2.6.18-4-486 #1 Wed Feb 21 15:25:16 UTC 2007 i686 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Broadcom CMIC-LE Host Bridge (GC-LE chipset) [1166:0014] (rev 33)
lspci -nn: 00:00.1 Host bridge [0600]: Broadcom CMIC-LE Host Bridge (GC-LE chipset) [1166:0014]
lspci -nn: 00:00.2 Host bridge [0600]: Broadcom CMIC-LE Host Bridge (GC-LE chipset) [1166:0014]
lspci -nn: 00:03.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL [1002:4752] (rev 27)
lspci -nn: 00:04.0 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Controller [0e11:b203] (rev 01)
lspci -nn: 00:04.2 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Processor [0e11:b204] (rev 01)
lspci -nn: 00:0f.0 ISA bridge [0601]: Broadcom CSB5 South Bridge [1166:0201] (rev 93)
lspci -nn: 00:0f.1 IDE interface [0101]: Broadcom CSB5 IDE Controller [1166:0212] (rev 93)
lspci -nn: 00:0f.2 USB Controller [0c03]: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220] (rev 05)
lspci -nn: 00:0f.3 Host bridge [0600]: Broadcom CSB5 LPC bridge [1166:0225]
lspci -nn: 00:10.0 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 05)
lspci -nn: 00:10.2 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 05)
lspci -nn: 00:11.0 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 05)
lspci -nn: 00:11.2 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 05)
lspci -nn: 01:03.0 SCSI storage controller [0100]: Adaptec AHA-3960D / AIC-7899A U160/m [9005:00c0] (rev 01)
lspci -nn: 01:03.1 SCSI storage controller [0100]: Adaptec AHA-3960D / AIC-7899A U160/m [9005:00c0] (rev 01)
lspci -nn: 01:04.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet [14e4:16a7] (rev 02)
lspci -nn: 02:01.0 PCI bridge [0604]: IBM PCI-X to PCI-X Bridge [1014:01a7] (rev 02)
lspci -nn: 03:04.0 RAID bus controller [0104]: Compaq Computer Corporation Smart Array 64xx [0e11:0046] (rev 01)
lspci -nn: 06:01.0 Multimedia audio controller [0401]: Creative Labs SB Audigy LS [1102:0007]
lspci -vnn: 00:00.0 Host bridge [0600]: Broadcom CMIC-LE Host Bridge (GC-LE chipset) [1166:0014] (rev 33)
lspci -vnn: Flags: fast devsel
lspci -vnn:
lspci -vnn: 00:00.1 Host bridge [0600]: Broadcom CMIC-LE Host Bridge (GC-LE chipset) [1166:0014]
lspci -vnn: Flags: fast devsel
lspci -vnn:
lspci -vnn: 00:00.2 Host bridge [0600]: Broadcom CMIC-LE Host Bridge (GC-LE chipset) [1166:0014]
lspci -vnn: Flags: fast devsel
lspci -vnn:
lspci -vnn: 00:03.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL [1002:4752] (rev 27)
lspci -vnn: Subsystem: Compaq Computer Corporation Unknown device [0e11:001e]
lspci -vnn: Flags: bus master, stepping, medium devsel, latency 64
lspci -vnn: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
lspci -vnn: I/O ports at 2400 [size=256]
lspci -vnn: Memory at f5ff0000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: [virtual] Expansion ROM at 50000000 [disabled] [size=128K]
lspci -vnn: Capabilities: [5c] Power Management version 2
lspci -vnn:
lspci -vnn: 00:04.0 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Controller [0e11:b203] (rev 01)
lspci -vnn: Subsystem: Compaq Computer Corporation Unknown device [0e11:b206]
lspci -vnn: Flags: medium devsel, IRQ 5
lspci -vnn: I/O ports at 1800 [size=256]
lspci -vnn: Memory at f5fe0000 (32-bit, non-prefetchable) [size=512]
lspci -vnn: Capabilities: [f0] Power Management version 2
lspci -vnn:
lspci -vnn: 00:04.2 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Processor [0e11:b204] (rev 01)
lspci -vnn: Subsystem: Compaq Computer Corporation Unknown device [0e11:b206]
lspci -vnn: Flags: bus master, stepping, medium devsel, latency 64, IRQ 10
lspci -vnn: I/O ports at 2800 [size=256]
lspci -vnn: Memory at f5fd0000 (32-bit, non-prefetchable) [size=2K]
lspci -vnn: Memory at f5fc0000 (32-bit, non-prefetchable) [size=8K]
lspci -vnn: Memory at f5f00000 (32-bit, non-prefetchable) [size=512K]
lspci -vnn: [virtual] Expansion ROM at 50020000 [disabled] [size=64K]
lspci -vnn: Capabilities: [f0] Power Management version 2
lspci -vnn:
lspci -vnn: 00:0f.0 ISA bridge [0601]: Broadcom CSB5 South Bridge [1166:0201] (rev 93)
lspci -vnn: Subsystem: Broadcom CSB5 South Bridge [1166:0201]
lspci -vnn: Flags: bus master, medium devsel, latency 32
lspci -vnn:
lspci -vnn: 00:0f.1 IDE interface [0101]: Broadcom CSB5 IDE Controller [1166:0212] (rev 93) (prog-if 8a [Master SecP PriP])
lspci -vnn: Subsystem: Broadcom CSB5 IDE Controller [1166:0212]
lspci -vnn: Flags: bus master, medium devsel, latency 64
lspci -vnn: I/O ports at <ignored>
lspci -vnn: I/O ports at <ignored>
lspci -vnn: I/O ports at <ignored>
lspci -vnn: I/O ports at <ignored>
lspci -vnn: I/O ports at 2000 [size=16]
lspci -vnn:
lspci -vnn: 00:0f.2 USB Controller [0c03]: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220] (rev 05) (prog-if 10)
lspci -vnn: Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220]
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 11
lspci -vnn: Memory at f5ef0000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn:
lspci -vnn: 00:0f.3 Host bridge [0600]: Broadcom CSB5 LPC bridge [1166:0225]
lspci -vnn: Subsystem: Broadcom Unknown device [1166:0230]
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn:
lspci -vnn: 00:10.0 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 05)
lspci -vnn: Flags: 66MHz, medium devsel
lspci -vnn: Capabilities: [60] PCI-X non-bridge device
lspci -vnn:
lspci -vnn: 00:10.2 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 05)
lspci -vnn: Flags: 66MHz, medium devsel
lspci -vnn: Capabilities: [60] PCI-X non-bridge device
lspci -vnn:
lspci -vnn: 00:11.0 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 05)
lspci -vnn: Flags: 66MHz, medium devsel
lspci -vnn: Capabilities: [60] PCI-X non-bridge device
lspci -vnn:
lspci -vnn: 00:11.2 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 05)
lspci -vnn: Flags: 66MHz, medium devsel
lspci -vnn: Capabilities: [60] PCI-X non-bridge device
lspci -vnn:
lspci -vnn: 01:03.0 SCSI storage controller [0100]: Adaptec AHA-3960D / AIC-7899A U160/m [9005:00c0] (rev 01)
lspci -vnn: Subsystem: Compaq Computer Corporation Unknown device [0e11:f620]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 169
lspci -vnn: BIST result: 00
lspci -vnn: I/O ports at 3000 [disabled] [size=256]
lspci -vnn: Memory at f7ef0000 (64-bit, non-prefetchable) [size=4K]
lspci -vnn: [virtual] Expansion ROM at 50040000 [disabled] [size=128K]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
lspci -vnn: 01:03.1 SCSI storage controller [0100]: Adaptec AHA-3960D / AIC-7899A U160/m [9005:00c0] (rev 01)
lspci -vnn: Subsystem: Compaq Computer Corporation Unknown device [0e11:f620]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177
lspci -vnn: BIST result: 00
lspci -vnn: I/O ports at 3400 [disabled] [size=256]
lspci -vnn: Memory at f7ee0000 (64-bit, non-prefetchable) [size=4K]
lspci -vnn: [virtual] Expansion ROM at 50060000 [disabled] [size=128K]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
lspci -vnn: 01:04.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet [14e4:16a7] (rev 02)
lspci -vnn: Subsystem: Compaq Computer Corporation Unknown device [0e11:00cb]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 185
lspci -vnn: Memory at f7ed0000 (64-bit, non-prefetchable) [size=64K]
lspci -vnn: [virtual] Expansion ROM at 50030000 [disabled] [size=64K]
lspci -vnn: Capabilities: [40] PCI-X non-bridge device
lspci -vnn: Capabilities: [48] Power Management version 2
lspci -vnn: Capabilities: [50] Vital Product Data
lspci -vnn: Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
lspci -vnn:
lspci -vnn: 02:01.0 PCI bridge [0604]: IBM PCI-X to PCI-X Bridge [1014:01a7] (rev 02)
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64
lspci -vnn: Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
lspci -vnn: I/O behind bridge: 00004000-00004fff
lspci -vnn: Memory behind bridge: f7f00000-f7ffffff
lspci -vnn: Prefetchable memory behind bridge: 0000000050100000-00000000501fffff
lspci -vnn: Capabilities: [80] PCI-X bridge device
lspci -vnn: Capabilities: [90] Power Management version 2
lspci -vnn:
lspci -vnn: 03:04.0 RAID bus controller [0104]: Compaq Computer Corporation Smart Array 64xx [0e11:0046] (rev 01)
lspci -vnn: Subsystem: Compaq Computer Corporation Unknown device [0e11:409c]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 193
lspci -vnn: Memory at f7ff0000 (64-bit, non-prefetchable) [size=8K]
lspci -vnn: I/O ports at 4000 [size=256]
lspci -vnn: Memory at f7f80000 (64-bit, non-prefetchable) [size=256K]
lspci -vnn: [virtual] Expansion ROM at 50100000 [disabled] [size=256K]
lspci -vnn: Capabilities: [d0] Power Management version 2
lspci -vnn: Capabilities: [dc] PCI-X non-bridge device
lspci -vnn: Capabilities: [f0] Vital Product Data
lspci -vnn:
lspci -vnn: 06:01.0 Multimedia audio controller [0401]: Creative Labs SB Audigy LS [1102:0007]
lspci -vnn: Subsystem: Creative Labs Unknown device [1102:100a]
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 10
lspci -vnn: I/O ports at 5000 [size=32]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
modulemap: 1166:0212 serverworks
modulemap: 1166:0220 ohci_hcd
modulemap: 9005:00c0 aic7xxx
modulemap: 9005:00c0 aic7xxx
modulemap: 14e4:16a7 tg3
modulemap: 0e11:0046 cciss
lsmod: Module Size Used by
lsmod: sd_mod 18832 0
lsmod: qnx4 10612 0
lsmod: ntfs 184084 0
lsmod: dm_mod 48952 19
lsmod: xfs 464756 0
lsmod: reiserfs 210432 0
lsmod: jfs 156380 0
lsmod: ext3 116488 2
lsmod: jbd 47272 1 ext3
lsmod: vfat 11392 0
lsmod: fat 45596 1 vfat
lsmod: cciss 51844 5
lsmod: tg3 93572 0
lsmod: st 34076 0
lsmod: nls_iso8859_1 4096 18
lsmod: rsrc_nonstatic 11648 0
lsmod: pcmcia_core 35856 1 rsrc_nonstatic
lsmod: isofs 31544 0
lsmod: ide_disk 14720 0
lsmod: ide_generic 1280 0 [permanent]
lsmod: pdc202xx_new 7808 0 [permanent]
lsmod: aec62xx 6656 0 [permanent]
lsmod: alim15x3 11020 0 [permanent]
lsmod: amd74xx 12956 0 [permanent]
lsmod: atiixp 5776 0 [permanent]
lsmod: cmd64x 9884 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7684 0 [permanent]
lsmod: jmicron 4096 0 [permanent]
lsmod: ns87415 4168 0 [permanent]
lsmod: opti621 3972 0 [permanent]
lsmod: pdc202xx_old 9344 0 [permanent]
lsmod: piix 9092 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6528 0 [permanent]
lsmod: siimage 10880 0 [permanent]
lsmod: sis5513 12296 0 [permanent]
lsmod: slc90e66 4992 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 3972 0 [permanent]
lsmod: via82cxxx 8324 0 [permanent]
lsmod: usb_storage 70848 0
lsmod: vga16fb 11148 2
lsmod: vgastate 7680 1 vga16fb
lsmod: usbserial 28136 0
lsmod: usbhid 35552 0
lsmod: usbkbd 6656 0
lsmod: thermal 13320 0
lsmod: processor 23212 1 thermal
lsmod: fan 4740 0
lsmod: ide_cd 35360 0
lsmod: cdrom 32160 1 ide_cd
lsmod: generic 5380 0 [permanent]
lsmod: floppy 51748 0
lsmod: parport_pc 31268 0
lsmod: parport 31816 1 parport_pc
lsmod: aic7xxx 153428 0
lsmod: scsi_transport_spi 22016 1 aic7xxx
lsmod: scsi_mod 121352 6 sd_mod,cciss,st,usb_storage,aic7xxx,scsi_transport_spi
lsmod: ohci_hcd 17284 0
lsmod: usbcore 108676 6 usb_storage,usbserial,usbhid,usbkbd,ohci_hcd
lsmod: serverworks 8328 0 [permanent]
lsmod: ide_core 107248 31 ide_disk,ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,jmicron,ns87415,opti621,pdc202xx_old,piix,rz1000,sc1200,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,generic,serverworks
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 453396 444 452952 0% /dev
df: tmpfs 453396 444 452952 0% /dev
df: tmpfs 453396 444 452952 0% /.dev
df: /dev/mapper/dom0_vg-simple_root 5160576 561728 4336704 11% /target
df: /dev/cciss/c0d0p3 116661 12745 97892 12% /target/boot
free: total used free shared buffers
free: Mem: 906792 556468 350324 0 39828
free: Swap: 1048568 0 1048568
free: Total: 1955360 556468 1398892
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 2
/proc/cpuinfo: model name : Intel(R) Xeon(TM) CPU 3.20GHz
/proc/cpuinfo: stepping : 5
/proc/cpuinfo: cpu MHz : 3189.693
/proc/cpuinfo: cache size : 1024 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 2
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
/proc/cpuinfo: bogomips : 6382.96
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 0220-0223 : ACPI PM1b_EVT_BLK
/proc/ioports: 0230-0233 : ACPI PM1a_CNT_BLK
/proc/ioports: 02f8-02ff : serial
/proc/ioports: 0378-037a : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f2-03f5 : floppy
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f7-03f7 : floppy DIR
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0408-040f : pnp 00:01
/proc/ioports: 0900-0903 : ACPI PM1a_EVT_BLK
/proc/ioports: 0910-0913 : ACPI PM1b_CNT_BLK
/proc/ioports: 0920-0923 : ACPI PM_TMR
/proc/ioports: 0930-0937 : pnp 00:01
/proc/ioports: 0940-0947 : pnp 00:01
/proc/ioports: 0c80-0c83 : EISA device CPQ0726
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 0f50-0f58 : pnp 00:01
/proc/ioports: 1800-18ff : 0000:00:04.0
/proc/ioports: 2000-200f : 0000:00:0f.1
/proc/ioports: 2000-2007 : ide0
/proc/ioports: 2008-200f : ide1
/proc/ioports: 2400-24ff : 0000:00:03.0
/proc/ioports: 2800-28ff : 0000:00:04.2
/proc/ioports: 3000-30ff : 0000:01:03.0
/proc/ioports: 3400-34ff : 0000:01:03.1
/proc/ioports: 4000-4fff : PCI Bus #03
/proc/ioports: 4000-40ff : 0000:03:04.0
/proc/ioports: 4000-40ff : cciss
/proc/ioports: 5000-501f : 0000:06:01.0
/proc/iomem: 00000000-0009f3ff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009f400-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000c8000-000cbfff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-3fff9fff : System RAM
/proc/iomem: 00100000-00277829 : Kernel code
/proc/iomem: 0027782a-0030dc73 : Kernel data
/proc/iomem: 3fffa000-3fffffff : ACPI Tables
/proc/iomem: 50000000-5001ffff : 0000:00:03.0
/proc/iomem: 50020000-5002ffff : 0000:00:04.2
/proc/iomem: 50030000-5003ffff : 0000:01:04.0
/proc/iomem: 50040000-5005ffff : 0000:01:03.0
/proc/iomem: 50060000-5007ffff : 0000:01:03.1
/proc/iomem: 50100000-501fffff : PCI Bus #03
/proc/iomem: 50100000-5013ffff : 0000:03:04.0
/proc/iomem: f5ef0000-f5ef0fff : 0000:00:0f.2
/proc/iomem: f5ef0000-f5ef0fff : ohci_hcd
/proc/iomem: f5f00000-f5f7ffff : 0000:00:04.2
/proc/iomem: f5fc0000-f5fc1fff : 0000:00:04.2
/proc/iomem: f5fd0000-f5fd07ff : 0000:00:04.2
/proc/iomem: f5fe0000-f5fe01ff : 0000:00:04.0
/proc/iomem: f5ff0000-f5ff0fff : 0000:00:03.0
/proc/iomem: f6000000-f6ffffff : 0000:00:03.0
/proc/iomem: f7ed0000-f7edffff : 0000:01:04.0
/proc/iomem: f7ed0000-f7edffff : tg3
/proc/iomem: f7ee0000-f7ee0fff : 0000:01:03.1
/proc/iomem: f7ee0000-f7ee0fff : aic7xxx
/proc/iomem: f7ef0000-f7ef0fff : 0000:01:03.0
/proc/iomem: f7ef0000-f7ef0fff : aic7xxx
/proc/iomem: f7f00000-f7ffffff : PCI Bus #03
/proc/iomem: f7f80000-f7fbffff : 0000:03:04.0
/proc/iomem: f7f80000-f7fbffff : cciss
/proc/iomem: f7ff0000-f7ff1fff : 0000:03:04.0
/proc/iomem: f7ff0000-f7ff1fff : cciss
/proc/iomem: fec00000-fec0ffff : reserved
/proc/iomem: fee00000-fee0ffff : reserved
/proc/iomem: ffc00000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 660193 IO-APIC-edge timer
/proc/interrupts: 1: 2691 IO-APIC-edge i8042
/proc/interrupts: 6: 20 IO-APIC-edge floppy
/proc/interrupts: 7: 0 IO-APIC-edge parport0
/proc/interrupts: 9: 0 IO-APIC-level acpi
/proc/interrupts: 11: 0 IO-APIC-level ohci_hcd:usb1
/proc/interrupts: 14: 39939 IO-APIC-edge ide0
/proc/interrupts: 169: 59 IO-APIC-level aic7xxx
/proc/interrupts: 177: 15 IO-APIC-level aic7xxx
/proc/interrupts: 185: 41102 IO-APIC-level eth0
/proc/interrupts: 193: 35410 IO-APIC-level cciss0
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 660178
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 906792 kB
/proc/meminfo: MemFree: 350132 kB
/proc/meminfo: Buffers: 39828 kB
/proc/meminfo: Cached: 451264 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 295596 kB
/proc/meminfo: Inactive: 212812 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 906792 kB
/proc/meminfo: LowFree: 350132 kB
/proc/meminfo: SwapTotal: 1048568 kB
/proc/meminfo: SwapFree: 1048568 kB
/proc/meminfo: Dirty: 1912 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 16808 kB
/proc/meminfo: Mapped: 1800 kB
/proc/meminfo: Slab: 38408 kB
/proc/meminfo: PageTables: 228 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 1501964 kB
/proc/meminfo: Committed_AS: 20768 kB
/proc/meminfo: VmallocTotal: 122576 kB
/proc/meminfo: VmallocUsed: 8180 kB
/proc/meminfo: VmallocChunk: 114108 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 feffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 49 structures occupying 1355 bytes.
dmidecode: Table at 0x000EC000.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: Vendor: Compaq
dmidecode: Version: P28
dmidecode: Release Date: 09/08/2003
dmidecode: Address: 0xF0000
dmidecode: Runtime Size: 64 kB
dmidecode: ROM Size: 2048 kB
dmidecode: Characteristics:
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: ESCD support is available
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: 5.25"/360 KB floppy services are supported (int 13h)
dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: BIOS boot specification is supported
dmidecode:
dmidecode: Handle 0x0100, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer: Compaq
dmidecode: Product Name: ProLiant ML370 G3
dmidecode: Version: Not Specified
dmidecode: Serial Number: 802BLZC328
dmidecode: UUID: 38303242-4C5A-4333-3238-202020202020
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0300, DMI type 3, 13 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: Compaq
dmidecode: Type: Tower
dmidecode: Lock: Not Present
dmidecode: Version: Not Specified
dmidecode: Serial Number: 802BLZC328
dmidecode: Asset Tag:
dmidecode: Boot-up State: Unknown
dmidecode: Power Supply State: Unknown
dmidecode: Thermal State: Unknown
dmidecode: Security Status: Unknown
dmidecode:
dmidecode: Handle 0x0406, DMI type 4, 32 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: Proc 1
dmidecode: Type: Central Processor
dmidecode: Family: Xeon
dmidecode: Manufacturer: Intel
dmidecode: ID: 25 0F 00 00 FF FB EB BF
dmidecode: Signature: Type 0, Family 15, Model 2, Stepping 5
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: CLFSH (CLFLUSH instruction supported)
dmidecode: DS (Debug store)
dmidecode: ACPI (ACPI supported)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: SSE2 (Streaming SIMD extensions 2)
dmidecode: SS (Self-snoop)
dmidecode: HTT (Hyper-threading technology)
dmidecode: TM (Thermal monitor supported)
dmidecode: PBE (Pending break enabled)
dmidecode: Version: Not Specified
dmidecode: Voltage: 1.7 V
dmidecode: External Clock: 533 MHz
dmidecode: Max Speed: 3600 MHz
dmidecode: Current Speed: 3200 MHz
dmidecode: Status: Populated, Idle
dmidecode: Upgrade: ZIF Socket
dmidecode: L1 Cache Handle: 0x0716
dmidecode: L2 Cache Handle: 0x0726
dmidecode: L3 Cache Handle: 0x0736
dmidecode:
dmidecode: Handle 0x0400, DMI type 4, 32 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: Proc 2
dmidecode: Type: Central Processor
dmidecode: Family: Xeon
dmidecode: Manufacturer: Intel
dmidecode: ID: 25 0F 00 00 FF FB EB BF
dmidecode: Signature: Type 0, Family 15, Model 2, Stepping 5
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: CLFSH (CLFLUSH instruction supported)
dmidecode: DS (Debug store)
dmidecode: ACPI (ACPI supported)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: SSE2 (Streaming SIMD extensions 2)
dmidecode: SS (Self-snoop)
dmidecode: HTT (Hyper-threading technology)
dmidecode: TM (Thermal monitor supported)
dmidecode: PBE (Pending break enabled)
dmidecode: Version: Not Specified
dmidecode: Voltage: 1.7 V
dmidecode: External Clock: 533 MHz
dmidecode: Max Speed: 3600 MHz
dmidecode: Current Speed: 3200 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: ZIF Socket
dmidecode: L1 Cache Handle: 0x0710
dmidecode: L2 Cache Handle: 0x0720
dmidecode: L3 Cache Handle: 0x0730
dmidecode:
dmidecode: Handle 0x0716, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Processor 1 Internal L1 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 8 KB
dmidecode: Maximum Size: 32 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Installed SRAM Type: Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0710, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Processor 2 Internal L1 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 8 KB
dmidecode: Maximum Size: 32 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Installed SRAM Type: Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0726, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Processor 1 Internal L2 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 512 KB
dmidecode: Maximum Size: 2048 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Installed SRAM Type: Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Other
dmidecode:
dmidecode: Handle 0x0720, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Processor 2 Internal L2 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 512 KB
dmidecode: Maximum Size: 2048 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Installed SRAM Type: Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Other
dmidecode:
dmidecode: Handle 0x0736, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Processor 1 Internal L3 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 3
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 1024 KB
dmidecode: Maximum Size: 1024 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Installed SRAM Type: Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Other
dmidecode:
dmidecode: Handle 0x0730, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Processor 2 Internal L3 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 3
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 1024 KB
dmidecode: Maximum Size: 1024 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Installed SRAM Type: Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Other
dmidecode:
dmidecode: Handle 0x0801, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J58
dmidecode: Internal Connector Type: Access Bus (USB)
dmidecode: External Reference Designator: USB Port 1
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0802, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J58
dmidecode: Internal Connector Type: Access Bus (USB)
dmidecode: External Reference Designator: USB Port 2
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0901, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot 1
dmidecode: Type: 64-bit PCI-X
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 1
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0902, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot 2
dmidecode: Type: 64-bit PCI-X
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 2
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0903, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot 3
dmidecode: Type: 64-bit PCI-X
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 3
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0904, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot 4
dmidecode: Type: 64-bit PCI-X
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 4
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0905, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot 5
dmidecode: Type: 64-bit PCI-X
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 5
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0906, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot 6
dmidecode: Type: 64-bit PCI-X
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 6
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x1000, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: Maximum Capacity: 12 GB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 6
dmidecode:
dmidecode: Handle 0x1100, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: 1
dmidecode: Locator: DIMM 01
dmidecode: Bank Locator: Not Specified
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 266 MHz (3.8 ns)
dmidecode:
dmidecode: Handle 0x1101, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: 1
dmidecode: Locator: DIMM 02
dmidecode: Bank Locator: Not Specified
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 266 MHz (3.8 ns)
dmidecode:
dmidecode: Handle 0x1102, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: 2
dmidecode: Locator: DIMM 03
dmidecode: Bank Locator: Not Specified
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 266 MHz (3.8 ns)
dmidecode:
dmidecode: Handle 0x1103, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: 2
dmidecode: Locator: DIMM 04
dmidecode: Bank Locator: Not Specified
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 266 MHz (3.8 ns)
dmidecode:
dmidecode: Handle 0x1104, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: 3
dmidecode: Locator: DIMM 05
dmidecode: Bank Locator: Not Specified
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 266 MHz (3.8 ns)
dmidecode:
dmidecode: Handle 0x1105, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: 3
dmidecode: Locator: DIMM 06
dmidecode: Bank Locator: Not Specified
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 266 MHz (3.8 ns)
dmidecode:
dmidecode: Handle 0x1300, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 1 GB
dmidecode: Physical Array Handle: 0x1000
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x1400, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 1 GB
dmidecode: Physical Device Handle: 0x1100
dmidecode: Memory Array Mapped Address Handle: 0x1300
dmidecode: Partition Row Position: 1
dmidecode: Interleave Position: 1
dmidecode: Interleaved Data Depth: Unknown
dmidecode:
dmidecode: Handle 0x1401, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 1 GB
dmidecode: Physical Device Handle: 0x1101
dmidecode: Memory Array Mapped Address Handle: 0x1300
dmidecode: Partition Row Position: 1
dmidecode: Interleave Position: 2
dmidecode: Interleaved Data Depth: Unknown
dmidecode:
dmidecode: Handle 0x1402, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x1102
dmidecode: Memory Array Mapped Address Handle: 0x1300
dmidecode: Partition Row Position: 1
dmidecode: Interleave Position: 1
dmidecode: Interleaved Data Depth: Unknown
dmidecode:
dmidecode: Handle 0x1403, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x1103
dmidecode: Memory Array Mapped Address Handle: 0x1300
dmidecode: Partition Row Position: 1
dmidecode: Interleave Position: 2
dmidecode: Interleaved Data Depth: Unknown
dmidecode:
dmidecode: Handle 0x1404, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x1104
dmidecode: Memory Array Mapped Address Handle: 0x1300
dmidecode: Partition Row Position: 1
dmidecode: Interleave Position: 1
dmidecode: Interleaved Data Depth: Unknown
dmidecode:
dmidecode: Handle 0x1405, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x1105
dmidecode: Memory Array Mapped Address Handle: 0x1300
dmidecode: Partition Row Position: 1
dmidecode: Interleave Position: 2
dmidecode: Interleaved Data Depth: Unknown
dmidecode:
dmidecode: Handle 0x2000, DMI type 32, 11 bytes
dmidecode: System Boot Information
dmidecode: Status: Firmware-detected hardware failure
dmidecode:
dmidecode: Handle 0xC100, DMI type 193, 7 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: C1 07 00 C1 01 01 02
dmidecode: Strings:
dmidecode: 09/08/2003
dmidecode: 03/19/2003
dmidecode:
dmidecode: Handle 0xC200, DMI type 194, 5 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: C2 05 00 C2 0F
dmidecode:
dmidecode: Handle 0xC300, DMI type 195, 5 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: C3 05 00 C3 01
dmidecode: Strings:
dmidecode: $0E110726
dmidecode:
dmidecode: Handle 0xC400, DMI type 196, 5 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: C4 05 00 C4 00
dmidecode:
dmidecode: Handle 0xC506, DMI type 197, 10 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: C5 0A 06 C5 06 04 06 00 FF 01
dmidecode:
dmidecode: Handle 0xC500, DMI type 197, 10 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: C5 0A 00 C5 00 04 00 01 FF 02
dmidecode:
dmidecode: Handle 0xC600, DMI type 198, 10 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: C6 0A 00 C6 17 00 00 01 3C 00
dmidecode:
dmidecode: Handle 0xC700, DMI type 199, 52 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: C7 34 00 C7 11 00 00 00 03 20 13 06 25 0F 00 00
dmidecode: 15 00 00 00 03 20 04 06 29 0F 00 00 1D 00 00 00
dmidecode: 03 20 16 01 24 0F 00 00 38 00 00 00 03 20 04 06
dmidecode: 27 0F 00 00
dmidecode:
dmidecode: Handle 0xCA00, DMI type 202, 8 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: CA 08 00 CA 00 11 FF 01
dmidecode:
dmidecode: Handle 0xCA01, DMI type 202, 8 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: CA 08 01 CA 01 11 FF 02
dmidecode:
dmidecode: Handle 0xCA02, DMI type 202, 8 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: CA 08 02 CA 02 11 FF 03
dmidecode:
dmidecode: Handle 0xCA03, DMI type 202, 8 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: CA 08 03 CA 03 11 FF 04
dmidecode:
dmidecode: Handle 0xCA04, DMI type 202, 8 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: CA 08 04 CA 04 11 FF 05
dmidecode:
dmidecode: Handle 0xCA05, DMI type 202, 8 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: CA 08 05 CA 05 11 FF 06
dmidecode:
dmidecode: Handle 0x7F00, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: usb-storage-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: USB storage support
Package: serial-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: serial-modules
Depends: kernel-image-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Description: Serial drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: cdrom-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: cdrom-core-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, ide-modules-2.6.18-4-486-di
Description: CDROM support
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.37
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.11
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.25
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.18
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.45
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: fb-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: fb-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Frame buffer support
Package: scsi-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, parport-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Description: SCSI drivers
Package: pcmcia-storage-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.18-4-486-di, ide-core-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Description: PCMCIA storage drivers
Package: kernel-image-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: usb-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-modules
Depends: kernel-image-2.6.18-4-486-di
Description: USB support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-2
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: parport-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: parport-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Parallel port support
Package: rootskel
Status: install ok installed
Version: 1.50
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: ide-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: ide-core-modules
Depends: kernel-image-2.6.18-4-486-di
Description: IDE support
Package: cdrom-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: cdrom-modules
Depends: ide-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, kernel-image-2.6.18-4-486-di
Description: Esoteric CDROM drivers
Package: udev-udeb
Status: install ok unpacked
Version: 0.105-3
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: ide-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: ide-modules
Depends: kernel-image-2.6.18-4-486-di, ide-core-modules-2.6.18-4-486-di
Description: IDE drivers
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-7
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: auto-install
Status: install ok unpacked
Version: 0.03
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.9
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.2-1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.114
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.03
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: pcmcia-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: pcmcia-modules
Depends: kernel-image-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Description: Common PCMCIA drivers
Package: load-cdrom
Status: install ok installed
Version: 1.14
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: scsi-common-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-common-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di
Description: Very common SCSI drivers
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: acpi-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: acpi-modules
Depends: kernel-image-2.6.18-4-486-di
Description: ACPI support modules
Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file
Package: floppy-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: floppy-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Floppy driver
Package: usb-serial-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: USB serial drivers
Package: floppy-retriever
Status: install ok unpacked
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.50
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-4
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.28
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.50
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.29
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.27
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-7
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.45
Description: Terminfo entries needed by newt/slang in debian installer
Package: fat-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: fat-modules
Depends: kernel-image-2.6.18-4-486-di
Description: FAT filesystem support
Package: hw-detect
Status: install ok installed
Version: 1.50
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.34
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.50
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: firewire-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-4-486-di, kernel-image-2.6.18-4-486-di
Description: Core FireWire drivers
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.28
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.11
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.36
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: file-preseed
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.114
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: firmware-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: firmware-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Firmware request modules
Package: input-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: input-modules
Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: Input devices support
Package: scsi-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Core SCSI subsystem
Package: cdrom-detect
Status: install ok installed
Version: 1.20
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: sata-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: sata-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di
Description: SATA drivers
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20070308
Description: debian installation image
Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This minimal package includes the shared library
for use with the Debian installer.
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 632
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.76
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.13
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.14
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 196
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.2
Depends: libc6 (>= 2.3.6-6), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.5
Depends: libc6 (>= 2.3.6-6)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.45
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.50
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-4
Depends: libc6 (>= 2.3.6-6)
Description: Dump Desktop Management Interface data (udeb)
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: efi-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: efi-modules
Description: EFI modules
This package contains EFI modules.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, efi-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
Installer-Menu-Item: 76
Package: ext3-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-19
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.9
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: gpgv-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.6-1
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: minimal signature verification tool
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG's signature verification tool, gpgv, packaged in minimal
form for use in debian-installer.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 376
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.22
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1584
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-13
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-4
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 436
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-9
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 412
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2992
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, crc-modules-2.6.18-4-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 444
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, firewire-core-modules-2.6.18-4-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 572
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, nic-extra-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 208
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-6+b2
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 392
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 68
Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 164
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 22
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 872
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 105
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 880
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20
Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base, efi-modules
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 21
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 47
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 35
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 232
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-9
Description: PCMCIA Card Services for Linux (udeb)
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1388
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: scsi-modules-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 360
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 552
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 248
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
--- End Message ---