--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: installation-reports: almost good : ext3 on lvm resizing not automatic, and wrong keyboard type after reboot (iBook G4)
- From: Benjamin Cama <benoar@free.fr>
- Date: Thu, 22 Feb 2007 09:07:09 +0100
- Message-id: <20070222080709.7521.72375.reportbug@ibook>
Package: installation-reports
Severity: normal
-- Package-specific info:
Boot method: netinst CD
Image version: 21/02/2007 #2 netinst daily build for ppc
Date: 22/02/2007
Machine: iBook G4 800MHz
$ cat /proc/cpuinfo
processor : 0
cpu : 7455, altivec supported
clock : 798.720000MHz
revision : 0.3 (pvr 8001 0303)
bogomips : 48.41
timebase : 18432000
platform : PowerMac
machine : PowerBook6,3
motherboard : PowerBook6,3 MacRISC3 Power Macintosh
detected as : 287 (iBook G4)
pmac flags : 0000001b
L2 cache : 256K unified
pmac-generation : NewWorld
Partitions:
# fdisk -l /dev/hda
/dev/hda
# type name length base ( size ) system
/dev/hda1 Apple_partition_map Apple 63 @ 1 ( 31.5k) Partition map
/dev/hda2 Apple_Bootstrap untitled 15626 @ 64 ( 7.6M) NewWorld bootblock
/dev/hda3 Apple_HFS Apple_HFS_Untitled_3 42706543 @ 262208 ( 20.4G) HFS
/dev/hda4 Apple_UNIX_SVR2 boot 131072 @ 15690 ( 64.0M) Linux native
/dev/hda5 Linux_LVM lvm 72991488 @ 42968751 ( 34.8G) Unknown
/dev/hda6 Apple_UNIX_SVR2 swap 1250001 @ 115960239 (610.4M) Linux swap
/dev/hda7 Apple_UNIX_SVR2 boot_debian 115446 @ 146762 ( 56.4M) Linux native
Block size=512, Number of Blocks=117210240
DeviceType=0x0, DeviceId=0x0
There are two systems on it (well, 3 with MacOS X) : previous one was Ubuntu Edgy, installed Etch in parallel. Root
partitions for the two systems on LVM, with one logical volume for each. Made two separate /boot to avoid problems.
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
Initial boot OK until partitionning.
I partitionned manually the system, so i was prepared to have some difficulties with my system : previously a dual
boot OSX/Ubuntu machine, i was wanting do add Etch on it. OSX is on a separate HFS+ partition, Ubuntu installed on
two logical volumes (/ and /home) on the lvm partition. I wanted to shrink /home and get some free space to install
Debian on it. Tried it : had a warning about experimental code (ext3 resizing), accepted it. First wired thing : I
had no feedback when partman resized the partition (i.e. it stayed at 0% during the resizing, which lasted for about
15 minutes...), then it went back to partman selection screen, nothing having changed ! The partition still had the
same size. I had already struggled with lvm so i quickly discovered the problem (going to a console and mounting the
partition) : the ext3 fs had been correctly resized, but not the logical volume. I had to lvresize by hand, doing the
math to get the correct size (thanks to e2fsck which showed me the block count, and me "guessing" the block size was
4096 bytes). After that i could create a new lv and make it an ext3 root fs. One inconvenient, though : sizes in
partman are in SI unit, not the usual 1024 factors. It's a bit strange when all the command line tools you use during
install show you "human readable" size with great differences (around 2GB for the partition i was resizing ...)
The rest of the install went smoothly.
On reboot, i saw i had lost the possibility of booting Ubuntu (well, i think my decision to have separate /boot
wasn't a good idea, since yaboot's stage 1 cannot choose more than one /boot partition to boot from). My mistake,
will have to correct that.
Once logged, wrong keyboard layout selected in Gnome (worked well during install, and also in console once rebooted)
: i had to manually select "Apple-Macintosh" as keyboard model; language was correct, though.
Did not have the time to test a lot the system, but all seems fine.
Some remarks :
- some people may be disturbed by the network adapters order : the ethernet-over-ieee1394 is eth0, and isn't very
usefull to most people
- the default keyboard layout renders the 'Command' ('Apple') key almost useless, as it is mapped like the
'windows' key on PC keyboards. On MacOS X it is used for a lot of other things. Ooops, i just tried and it is in
fact usefull to compose unreachable characters (like [{|€) : good point, even if i used to have a keymap that inverted
Alt and Command (note that these are personnal choices).
- there is a lot of choice in the application list. It's quite disturbing when you come from Ubuntu where all has been
taken down to 'one task, one application' :-)
Otherwise, it's always a pleasure to use debian-installer, as it is very easy to use but still offer a lot of different
possibilities for exotic setups.
Last thing : the overall systems seems more reactive than Ubuntu. Good point !
Thanks everyone for this very pleasant Debian release.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070215-03:08)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux ibook 2.6.18-4-powerpc #1 Fri Feb 2 13:59:17 CET 2007 ppc unknown
lspci -nn: 0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 AGP [106b:0034]
lspci -nn: 0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc M9+ 5C63 [Radeon Mobility 9200 (AGP)] [1002:5c63] (rev 01)
lspci -nn: 0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 PCI [106b:0035]
lspci -nn: 0001:10:12.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
lspci -nn: 0001:10:17.0 Unknown class [ff00]: Apple Computer Inc. KeyLargo/Intrepid Mac I/O [106b:003e]
lspci -nn: 0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f]
lspci -nn: 0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f]
lspci -nn: 0001:10:1a.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f]
lspci -nn: 0001:10:1b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
lspci -nn: 0001:10:1b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
lspci -nn: 0001:10:1b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04)
lspci -nn: 0002:20:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 Internal PCI [106b:0036]
lspci -nn: 0002:20:0d.0 Unknown class [ff00]: Apple Computer Inc. UniNorth/Intrepid ATA/100 [106b:003b]
lspci -nn: 0002:20:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. UniNorth 2 FireWire [106b:0031] (rev 81)
lspci -nn: 0002:20:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) [106b:0032] (rev 80)
lspci -vnn: 0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 AGP [106b:0034]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 16
lspci -vnn: Capabilities: [80] AGP version 1.0
lspci -vnn:
lspci -vnn: 0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc M9+ 5C63 [Radeon Mobility 9200 (AGP)] [1002:5c63] (rev 01)
lspci -vnn: Subsystem: ATI Technologies Inc M9+ 5C63 [Radeon Mobility 9200 (AGP)] [1002:5c63]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 255, IRQ 48
lspci -vnn: Memory at 98000000 (32-bit, prefetchable) [size=128M]
lspci -vnn: I/O ports at f0000400 [size=256]
lspci -vnn: Memory at 90000000 (32-bit, non-prefetchable) [size=64K]
lspci -vnn: Expansion ROM at f1000000 [size=128K]
lspci -vnn: Capabilities: [58] AGP version 2.0
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn:
lspci -vnn: 0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 PCI [106b:0035]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 16
lspci -vnn:
lspci -vnn: 0001:10:12.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
lspci -vnn: Subsystem: Apple Computer Inc. Unknown device [106b:004e]
lspci -vnn: Flags: bus master, fast devsel, latency 16, IRQ 52
lspci -vnn: Memory at 80084000 (32-bit, non-prefetchable) [disabled] [size=8K]
lspci -vnn: Capabilities: [40] Power Management version 2
lspci -vnn:
lspci -vnn: 0001:10:17.0 Unknown class [ff00]: Apple Computer Inc. KeyLargo/Intrepid Mac I/O [106b:003e]
lspci -vnn: Flags: bus master, medium devsel, latency 16
lspci -vnn: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
lspci -vnn:
lspci -vnn: 0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10)
lspci -vnn: Flags: medium devsel, IRQ 27
lspci -vnn:
lspci -vnn: 0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10)
lspci -vnn: Flags: medium devsel, IRQ 28
lspci -vnn:
lspci -vnn: 0001:10:1a.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10)
lspci -vnn: Flags: bus master, medium devsel, latency 16, IRQ 29
lspci -vnn: Memory at 80083000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn:
lspci -vnn: 0001:10:1b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10)
lspci -vnn: Subsystem: NEC Corporation USB [1033:0035]
lspci -vnn: Flags: bus master, medium devsel, latency 16, IRQ 63
lspci -vnn: Memory at 80082000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [40] Power Management version 2
lspci -vnn:
lspci -vnn: 0001:10:1b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10)
lspci -vnn: Subsystem: NEC Corporation USB [1033:0035]
lspci -vnn: Flags: bus master, medium devsel, latency 16, IRQ 63
lspci -vnn: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [40] Power Management version 2
lspci -vnn:
lspci -vnn: 0001:10:1b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20)
lspci -vnn: Subsystem: NEC Corporation USB 2.0 [1033:00e0]
lspci -vnn: Flags: bus master, medium devsel, latency 16, IRQ 63
lspci -vnn: Memory at 80080000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: Capabilities: [40] Power Management version 2
lspci -vnn:
lspci -vnn: 0002:20:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 Internal PCI [106b:0036]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 16
lspci -vnn:
lspci -vnn: 0002:20:0d.0 Unknown class [ff00]: Apple Computer Inc. UniNorth/Intrepid ATA/100 [106b:003b]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 39
lspci -vnn: Memory at f5004000 (32-bit, non-prefetchable) [size=16K]
lspci -vnn:
lspci -vnn: 0002:20:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. UniNorth 2 FireWire [106b:0031] (rev 81) (prog-if 10)
lspci -vnn: Subsystem: Apple Computer Inc. Unknown device [106b:5811]
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 40
lspci -vnn: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn:
lspci -vnn: 0002:20:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) [106b:0032] (rev 80)
lspci -vnn: Flags: bus master, 66MHz, slow devsel, latency 16, IRQ 41
lspci -vnn: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
lspci -vnn: Expansion ROM at f5100000 [disabled] [size=1M]
lspci -vnn:
modulemap: 106b:003f ohci_hcd
modulemap: 1033:0035 ohci_hcd
modulemap: 1033:0035 ohci_hcd
modulemap: 1033:00e0 ehci_hcd
modulemap: 106b:0031 ohci1394
modulemap: 106b:0032 sungem
lsmod: Module Size Used by
lsmod: nls_utf8 2080 0
lsmod: hfsplus 88164 0
lsmod: dm_mod 65136 5
lsmod: xfs 517332 0
lsmod: reiserfs 316664 0
lsmod: jfs 195724 0
lsmod: hfs 57028 0
lsmod: ext3 155080 1
lsmod: jbd 69544 1 ext3
lsmod: vfat 14112 0
lsmod: fat 59996 1 vfat
lsmod: ext2 77992 1
lsmod: mbcache 9444 2 ext3,ext2
lsmod: sungem 34916 0
lsmod: sungem_phy 10528 1 sungem
lsmod: eth1394 21508 0
lsmod: sbp2 24648 0
lsmod: isofs 39224 0
lsmod: aec62xx 8064 0 [permanent]
lsmod: cmd64x 12348 0 [permanent]
lsmod: generic 5348 0 [permanent]
lsmod: hpt34x 5376 0 [permanent]
lsmod: ns87415 4580 0 [permanent]
lsmod: pdc202xx_new 10880 0 [permanent]
lsmod: pdc202xx_old 11328 0 [permanent]
lsmod: sc1200 9056 0 [permanent]
lsmod: siimage 13696 0 [permanent]
lsmod: sl82c105 7360 0 [permanent]
lsmod: trm290 4738 0 [permanent]
lsmod: via82cxxx 10276 0 [permanent]
lsmod: usb_storage 88300 0
lsmod: scsi_mod 168496 2 sbp2,usb_storage
lsmod: usbserial 35536 0
lsmod: usbhid 58340 0
lsmod: ide_cd 47236 0
lsmod: cdrom 43260 1 ide_cd
lsmod: ohci1394 40272 0
lsmod: ieee1394 426224 3 eth1394,sbp2,ohci1394
lsmod: ide_disk 18752 4
lsmod: ehci_hcd 34952 0
lsmod: ohci_hcd 22852 0
lsmod: usbcore 146016 6 usb_storage,usbserial,usbhid,ehci_hcd,ohci_hcd
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 321928 424 321504 0% /dev
df: tmpfs 321928 424 321504 0% /dev
df: tmpfs 321928 424 321504 0% /.dev
df: /dev/mapper/vg_main-lv_debian_system 5757224 2678812 2785960 49% /target
df: /dev/ide/host0/bus0/target0/lun0/part7 54165 10865 40433 21% /target/boot
free: total used free shared buffers
free: Mem: 643856 623700 20156 0 49380
free: Swap: 624992 420 624572
free: Total: 1268848 624120 644728
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: cpu : 7455, altivec supported
/proc/cpuinfo: clock : 798.720000MHz
/proc/cpuinfo: revision : 0.3 (pvr 8001 0303)
/proc/cpuinfo: bogomips : 48.41
/proc/cpuinfo: timebase : 18432000
/proc/cpuinfo: platform : PowerMac
/proc/cpuinfo: machine : PowerBook6,3
/proc/cpuinfo: motherboard : PowerBook6,3 MacRISC3 Power Macintosh
/proc/cpuinfo: detected as : 287 (iBook G4)
/proc/cpuinfo: pmac flags : 0000001b
/proc/cpuinfo: L2 cache : 256K unified
/proc/cpuinfo: pmac-generation : NewWorld
/proc/ioports: 00000000-007fffff : /pci@f2000000
/proc/ioports: 00802000-01001fff : /pci@f0000000
/proc/ioports: 00802400-008024ff : 0000:00:10.0
/proc/ioports: ff7fe000-ffffdfff : /pci@f4000000
/proc/iomem: 80000000-8fffffff : /pci@f2000000
/proc/iomem: 80000000-8007ffff : 0001:10:17.0
/proc/iomem: 80000000-8007ffff : 0.80000000:mac-io
/proc/iomem: 80000050-8000007f : 0.00000050:gpio
/proc/iomem: 80008000-800080ff : 0.00010000:i2s
/proc/iomem: 80008100-800081ff : 0.00010000:i2s
/proc/iomem: 80008200-800082ff : 0.00010000:i2s
/proc/iomem: 80008300-800083ff : 0.00010000:i2s
/proc/iomem: 80008800-800088ff : 0.00020000:ata-3
/proc/iomem: 80008800-800088ff : ide-pmac (dma)
/proc/iomem: 80010000-80010fff : 0.00010000:i2s
/proc/iomem: 80013000-80013000 : 0.00013000:ch-b
/proc/iomem: 80013000-80013000 : pmac_zilog
/proc/iomem: 80013010-80013010 : 0.00013000:ch-b
/proc/iomem: 80013010-80013010 : pmac_zilog
/proc/iomem: 80013020-80013020 : 0.00013020:ch-a
/proc/iomem: 80013020-80013020 : pmac_zilog
/proc/iomem: 80013030-80013030 : 0.00013020:ch-a
/proc/iomem: 80013030-80013030 : pmac_zilog
/proc/iomem: 80013040-80013040 : 0.00013000:ch-b
/proc/iomem: 80013040-80013040 : pmac_zilog
/proc/iomem: 80013050-80013050 : 0.00013020:ch-a
/proc/iomem: 80013050-80013050 : pmac_zilog
/proc/iomem: 80015000-80015fff : 0.00015000:timer
/proc/iomem: 80016000-80017fff : 0.00016000:via-pmu
/proc/iomem: 80018000-80018fff : 0.00018000:i2c
/proc/iomem: 80020000-80020fff : 0.00020000:ata-3
/proc/iomem: 80020000-80020fff : ide-pmac (ports)
/proc/iomem: 80040000-8007ffff : 0.00040000:interrup
/proc/iomem: 80080000-800800ff : 0001:10:1b.2
/proc/iomem: 80080000-800800ff : ehci_hcd
/proc/iomem: 80081000-80081fff : 0001:10:1b.1
/proc/iomem: 80081000-80081fff : ohci_hcd
/proc/iomem: 80082000-80082fff : 0001:10:1b.0
/proc/iomem: 80082000-80082fff : ohci_hcd
/proc/iomem: 80083000-80083fff : 0001:10:1a.0
/proc/iomem: 80083000-80083fff : ohci_hcd
/proc/iomem: 80084000-80085fff : 0001:10:12.0
/proc/iomem: 90000000-9fffffff : /pci@f0000000
/proc/iomem: 90000000-9000ffff : 0000:00:10.0
/proc/iomem: 90000000-9000ffff : radeonfb mmio
/proc/iomem: 98000000-9fffffff : 0000:00:10.0
/proc/iomem: 98000000-9fffffff : radeonfb framebuffer
/proc/iomem: f1000000-f1ffffff : /pci@f0000000
/proc/iomem: f1000000-f101ffff : 0000:00:10.0
/proc/iomem: f3000000-f3ffffff : /pci@f2000000
/proc/iomem: f5000000-f5ffffff : /pci@f4000000
/proc/iomem: f5000000-f5000fff : 0002:20:0e.0
/proc/iomem: f5000000-f50007ff : ohci1394
/proc/iomem: f5004000-f5007fff : 0002:20:0d.0
/proc/iomem: f5004000-f5007fff : Kauai ATA
/proc/iomem: f5200000-f53fffff : 0002:20:0f.0
/proc/iomem: f5200000-f53fffff : sungem
/proc/interrupts: CPU0
/proc/interrupts: 24: 3079 MPIC 1 Level ide1
/proc/interrupts: 25: 152416 MPIC 1 Level VIA-PMU
/proc/interrupts: 26: 0 MPIC 1 Level keywest i2c
/proc/interrupts: 29: 0 MPIC 1 Level ohci_hcd:usb1
/proc/interrupts: 39: 261503 MPIC 1 Level ide0
/proc/interrupts: 40: 2 MPIC 1 Level ohci1394
/proc/interrupts: 41: 520960 MPIC 1 Level eth1
/proc/interrupts: 42: 22 MPIC 1 Level keywest i2c
/proc/interrupts: 47: 9579 MPIC 1 Level GPIO1 ADB
/proc/interrupts: 63: 0 MPIC 1 Level ohci_hcd:usb2, ohci_hcd:usb3, ehci_hcd:usb4
/proc/interrupts: BAD: 0
/proc/meminfo: MemTotal: 643856 kB
/proc/meminfo: MemFree: 20196 kB
/proc/meminfo: Buffers: 49380 kB
/proc/meminfo: Cached: 508840 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 204352 kB
/proc/meminfo: Inactive: 375368 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 643856 kB
/proc/meminfo: LowFree: 20196 kB
/proc/meminfo: SwapTotal: 624992 kB
/proc/meminfo: SwapFree: 624572 kB
/proc/meminfo: Dirty: 1844 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 21548 kB
/proc/meminfo: Mapped: 2140 kB
/proc/meminfo: Slab: 34848 kB
/proc/meminfo: PageTables: 340 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 946920 kB
/proc/meminfo: Committed_AS: 25412 kB
/proc/meminfo: VmallocTotal: 317860 kB
/proc/meminfo: VmallocUsed: 26424 kB
/proc/meminfo: VmallocChunk: 290368 kB
/proc/bus/input/devices: I: Bus=0017 Vendor=0001 Product=0001 Version=0100
/proc/bus/input/devices: N: Name="Macintosh mouse button emulation"
/proc/bus/input/devices: P: Phys=
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=mouse0
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=3
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0017 Vendor=0001 Product=22c4 Version=0200
/proc/bus/input/devices: N: Name="ADB keyboard"
/proc/bus/input/devices: P: Phys=adb2:2.c4/input
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120003
/proc/bus/input/devices: B: KEY=feb0ffdf 3cfffff ffffffff fffffffe
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0017 Vendor=0001 Product=771f Version=0100
/proc/bus/input/devices: N: Name="ADB Powerbook buttons"
/proc/bus/input/devices: P: Phys=adb7:7.1f/input
/proc/bus/input/devices: S: Sysfs=/class/input/input2
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=100003
/proc/bus/input/devices: B: KEY=7b 0 2 0 e0000 0 0 0
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0017 Vendor=0001 Product=3301 Version=0100
/proc/bus/input/devices: N: Name="ADB mouse"
/proc/bus/input/devices: P: Phys=adb3:3.01/input
/proc/bus/input/devices: S: Sysfs=/class/input/input3
/proc/bus/input/devices: H: Handlers=mouse1
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=3
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0019 Vendor=0001 Product=0001 Version=0100
/proc/bus/input/devices: N: Name="PMU"
/proc/bus/input/devices: P: Phys=
/proc/bus/input/devices: S: Sysfs=/class/input/input4
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=23
/proc/bus/input/devices: B: KEY=100000 0 0 0
/proc/bus/input/devices: B: SW=1
/proc/bus/input/devices:
dmidecode: /usr/bin/report-hw: /usr/bin/report-hw: 57: dmidecode: not found
==============================================
Installer status:
==============================================
Package: firewire-core-modules-2.6.18-4-powerpc-di
Status: install ok unpacked
Version: 1.28
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-4-powerpc-di, kernel-image-2.6.18-4-powerpc-di
Description: Core FireWire drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.27
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.36
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-11
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.10
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.24
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: console-keymaps-usb
Status: install ok installed
Version: 2:1.01-6
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for USB keyboards
Package: cdrom-retriever
Status: install ok installed
Version: 1.13
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.17
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.44
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: usb-modules-2.6.18-4-powerpc-di
Status: install ok unpacked
Version: 1.28
Provides: usb-modules
Depends: kernel-image-2.6.18-4-powerpc-di
Description: USB support
Package: di-utils
Status: install ok installed
Version: 1.44
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: serial-modules-2.6.18-4-powerpc-di
Status: install ok unpacked
Version: 1.28
Provides: serial-modules
Depends: kernel-image-2.6.18-4-powerpc-di, pcmcia-modules-2.6.18-4-powerpc-di
Description: Serial drivers
Package: pcmcia-storage-modules-2.6.18-4-powerpc-di
Status: install ok unpacked
Version: 1.28
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.18-4-powerpc-di, cdrom-core-modules-2.6.18-4-powerpc-di, pcmcia-modules-2.6.18-4-powerpc-di
Description: PCMCIA storage drivers
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.113
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: usb-serial-modules-2.6.18-4-powerpc-di
Status: install ok unpacked
Version: 1.28
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-4-powerpc-di, usb-modules-2.6.18-4-powerpc-di
Description: USB serial drivers
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-1
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules
Package: scsi-core-modules-2.6.18-4-powerpc-di
Status: install ok unpacked
Version: 1.28
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-4-powerpc-di
Description: Core SCSI subsystem
Package: rootskel
Status: install ok installed
Version: 1.49
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: pcmcia-modules-2.6.18-4-powerpc-di
Status: install ok unpacked
Version: 1.28
Provides: pcmcia-modules
Depends: firmware-modules-2.6.18-4-powerpc-di
Description: Common PCMCIA drivers
Package: scsi-common-modules-2.6.18-4-powerpc-di
Status: install ok unpacked
Version: 1.28
Provides: scsi-common-modules
Depends: kernel-image-2.6.18-4-powerpc-di, scsi-core-modules-2.6.18-4-powerpc-di, cdrom-core-modules-2.6.18-4-powerpc-di
Description: Very common SCSI drivers
Package: udev-udeb
Status: install ok unpacked
Version: 0.103-2
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-7
Depends: libc6 (>= 2.3.5-1)
Description: Access software for a blind person using a soft braille terminal
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.5-1)
Description: text-wrapping library with i18n - runtime udeb
Package: auto-install
Status: install ok unpacked
Version: 0.03
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.8
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.3-1
Provides: editor
Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: floppy-modules-2.6.18-4-powerpc-di
Status: install ok unpacked
Version: 1.28
Provides: floppy-modules
Depends: kernel-image-2.6.18-4-powerpc-di
Description: Floppy driver
Package: cdebconf-udeb
Status: install ok installed
Version: 0.113
Provides: debconf-2.0
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.03
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: fs-common-modules-2.6.18-4-powerpc-di
Status: install ok unpacked
Version: 1.28
Provides: fs-common-modules
Depends: kernel-image-2.6.18-4-powerpc-di
Description: Common filesystem support
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: load-cdrom
Status: install ok installed
Version: 1.13
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.113
Depends: cdebconf-udeb, libc6 (>= 2.3.5-1)
Description: Plain text frontend for Debian Configuration Management System
Package: firmware-modules-2.6.18-4-powerpc-di
Status: install ok unpacked
Version: 1.28
Provides: firmware-modules
Depends: kernel-image-2.6.18-4-powerpc-di
Description: Firmware request modules
Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file
Package: floppy-retriever
Status: install ok unpacked
Version: 1.13
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.49
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-4
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.27
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.49
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47)
Description: Hardware architecture detector
Package: ide-modules-2.6.18-4-powerpc-di
Status: install ok unpacked
Version: 1.28
Provides: ide-modules
Depends: kernel-image-2.6.18-4-powerpc-di, fs-common-modules-2.6.18-4-powerpc-di
Description: IDE drivers
Package: save-logs
Status: install ok unpacked
Version: 2.28
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.44
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.26
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.5-1)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.5-1), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4-1
Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-6
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: kernel-image-2.6.18-4-powerpc-di
Status: install ok unpacked
Version: 1.28
Provides: kernel-image
Description: Linux kernel binary image for the Debian installer
Package: usb-storage-modules-2.6.18-4-powerpc-di
Status: install ok unpacked
Version: 1.28
Provides: usb-storage-modules
Depends: scsi-core-modules-2.6.18-4-powerpc-di, usb-modules-2.6.18-4-powerpc-di
Description: USB storage support
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.44
Description: Terminfo entries needed by newt/slang in debian installer
Package: hw-detect
Status: install ok installed
Version: 1.49
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.33
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.48
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions
Package: eject-udeb
Status: install ok unpacked
Version: 2.1.4-2.1
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: ejects CDs from d-i menu
Installer-Menu-Item: 960
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.27
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.10
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.113
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.34
Provides: configured-network
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: file-preseed
Status: install ok unpacked
Version: 1.27
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: zlib1g-udeb
Status: install ok unpacked
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.113
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: cdrom-core-modules-2.6.18-4-powerpc-di
Status: install ok unpacked
Version: 1.28
Provides: cdrom-core-modules
Depends: kernel-image-2.6.18-4-powerpc-di, scsi-core-modules-2.6.18-4-powerpc-di, ide-modules-2.6.18-4-powerpc-di
Description: CDROM support
Package: scsi-modules-2.6.18-4-powerpc-di
Status: install ok unpacked
Version: 1.28
Provides: scsi-modules
Depends: kernel-image-2.6.18-4-powerpc-di, scsi-core-modules-2.6.18-4-powerpc-di, cdrom-core-modules-2.6.18-4-powerpc-di, firmware-modules-2.6.18-4-powerpc-di
Description: SCSI drivers
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: input-modules-2.6.18-4-powerpc-di
Status: install ok unpacked
Version: 1.28
Provides: input-modules
Depends: kernel-image-2.6.18-4-powerpc-di, usb-modules-2.6.18-4-powerpc-di
Description: Input devices support
Package: cdrom-detect
Status: install ok installed
Version: 1.19
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: debian-installer
Status: install ok installed
Version: powerpc-cdrom-20070215-03:11
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.19
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.19
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.19
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 636
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.74
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.48), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 328
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.12
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.13
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 160
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.2
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 164
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.5
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.49
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 444
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: ext2-modules-2.6.18-4-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc-di, fs-common-modules-2.6.18-4-powerpc-di
Provides: ext2-modules
Description: EXT2 filesystem support
This package contains the EXT2 filesystem module for the Linux kernel.
Package: ext3-modules-2.6.18-4-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 312
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc-di, fs-common-modules-2.6.18-4-powerpc-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fat-modules-2.6.18-4-powerpc-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 144
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc-di, fs-common-modules-2.6.18-4-powerpc-di
Provides: fat-modules
Description: FAT filesystem support
This package contains the FAT and VFAT filesystem modules for the Linux kernel.
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.8
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: gpgv-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 308
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.6-1
Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1)
Description: minimal signature verification tool
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG's signature verification tool, gpgv, packaged in minimal
form for use in debian-installer.
Package: hfs-modules-2.6.18-4-powerpc-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 212
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc-di, fs-common-modules-2.6.18-4-powerpc-di
Provides: hfs-modules
Description: HFS filesystem support
This package contains the HFS and HFS+ filesystem modules for the Linux kernel.
Package: jfs-modules-2.6.18-4-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 260
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc-di, fs-common-modules-2.6.18-4-powerpc-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1176
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 48
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 2076
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-13
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 80
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.12-1
Depends: libc6 (>= 2.3.5-1)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 380
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 28
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: loop-modules-2.6.18-4-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 492
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-3
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: mac-fdisk-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 44
Maintainer: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de>
Version: 0.1-14
Depends: libc6 (>= 2.3.5-1)
Description: Apple disk partition manipulation tool
The fdisk utilities from the MkLinux project, adopted for Linux/m68k.
Mac-fdisk allows you to create and edit the partition table of a disk.
It supports only the Apple partition format used on Macintosh and PowerMac,
use pmac-fdisk for PC partition format disks as used on PowerPC machines.
Mac-fdisk is an interactive tool with a menu similar to PC fdisk, supported
options are somewhat different from PC fdisk due to the differences in
partition format.
.
This is a minimal mac-fdisk package used by the debian-installer.
Package: md-modules-2.6.18-4-powerpc-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 512
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 200
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-8
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 408
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 192
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.27
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.18-4-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc-di, nic-shared-modules-2.6.18-4-powerpc-di, firmware-modules-2.6.18-4-powerpc-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.18-4-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1344
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc-di, nic-shared-modules-2.6.18-4-powerpc-di, firmware-modules-2.6.18-4-powerpc-di, firewire-core-modules-2.6.18-4-powerpc-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.18-4-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 796
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc-di, nic-shared-modules-2.6.18-4-powerpc-di, nic-extra-modules-2.6.18-4-powerpc-di, pcmcia-modules-2.6.18-4-powerpc-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.18-4-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.15
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 76
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 484
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 66
Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 4
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 164
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 21
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 4
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 892
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 103
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 51
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 884
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 19
Depends: partman-base (>= 87), libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 45
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 50
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-newworld
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 16
Depends: partman-base, hfs-modules
Description: partman support for new-world PowerMac boot partitions
This package provides the 'newworld' partition use method. The yaboot
boot loader used on PCI-era PowerMac systems requires a special
Apple_Bootstrap partition, created by this method.
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 45
Depends: cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 47
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.11
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.18-4-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: sata-modules-2.6.18-4-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 448
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc-di, scsi-core-modules-2.6.18-4-powerpc-di
Provides: sata-modules
Description: SATA drivers
This package contains SATA drivers for the Linux kernel.
Package: scsi-extra-modules-2.6.18-4-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: scsi-modules-2.6.18-4-powerpc-di, scsi-core-modules-2.6.18-4-powerpc-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.15
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 360
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.18-4-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 624
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 272
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.18-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: yaboot-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.1.9
Depends: kernel-installer, partconf-find-partitions (>= 1.08), di-utils (>= 1.15), di-utils-mapdevfs, os-prober, archdetect
Provides: bootable-system
Description: Install yaboot on a hard disk
This package will install yaboot on the hard disk.
Installer-Menu-Item: 73
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: powerpc (ppc)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-3-powerpc
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
--- End Message ---