--- Begin Message ---
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Package: installation-reports
Boot method: Network-Installer-CD
Image version:
http://cdimage.debian.org/cdimage/etch_di_rc1/amd64/iso-cd/debian-testing-amd64-netinst.iso
Date: 16.11.2006 approx 21:00 CET
Machine: Desktop with ASUS M2R32-MVP Xpress3200
Processor: AMD X2 3800+ EE
Memory: 2 GB
Partitions: not important, yet
Output of lspci -nn and lspci -vnn:
(From knoppix-boot, since it was easier, to ssh to my box then)
root@3[~]# lspci -nn
0000:00:00.0 0600: 1002:5952
0000:00:02.0 0604: 1002:5a34
0000:00:05.0 0604: 1002:5a37
0000:00:12.0 0106: 1002:4380
0000:00:13.0 0c03: 1002:4387
0000:00:13.1 0c03: 1002:4388
0000:00:13.2 0c03: 1002:4389
0000:00:13.3 0c03: 1002:438a
0000:00:13.4 0c03: 1002:438b
0000:00:13.5 0c03: 1002:4386
0000:00:14.0 0c05: 1002:4385 (rev 13)
0000:00:14.1 0101: 1002:438c
0000:00:14.2 0403: 1002:4383
0000:00:14.3 0601: 1002:438d
0000:00:14.4 0604: 1002:4384
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:00.0 0300: 10de:0392 (rev a1)
0000:02:00.0 0101: 197b:2360 (rev 02)
0000:03:03.0 0c00: 1106:3044 (rev c0)
0000:03:04.0 0200: 11ab:4320 (rev 13)
root@3[~]# lspci -vnn
0000:00:00.0 0600: 1002:5952
Subsystem: 1002:5952
Flags: bus master, 66MHz, medium devsel, latency 0
0000:00:02.0 0604: 1002:5a34
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f9000000-fbdfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dff00000
Capabilities: [50] Power Management version 3
Capabilities: [58] #10 [0041]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Capabilities: [b0] #0d [0000]
Capabilities: [b8] #08 [a803]
0000:00:05.0 0604: 1002:5a37
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbe00000-fbefffff
Capabilities: [50] Power Management version 3
Capabilities: [58] #10 [0041]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Capabilities: [b0] #0d [0000]
Capabilities: [b8] #08 [a803]
0000:00:12.0 0106: 1002:4380 (prog-if 01)
Subsystem: 1043:8232
Flags: bus master, 66MHz, medium devsel, latency 96, IRQ 17
I/O ports at b000 [size=8]
I/O ports at a000 [size=4]
I/O ports at 9000 [size=8]
I/O ports at 8000 [size=4]
I/O ports at 7000 [size=16]
Memory at f8fffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/2
Enable-
Capabilities: [70] #12 [0010]
0000:00:13.0 0c03: 1002:4387 (prog-if 10)
Subsystem: 1002:4387
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at f8ffe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
0000:00:13.1 0c03: 1002:4388 (prog-if 10)
Subsystem: 1002:4388
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at f8ffd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
0000:00:13.2 0c03: 1002:4389 (prog-if 10)
Subsystem: 1002:4389
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 20
Memory at f8ffc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
0000:00:13.3 0c03: 1002:438a (prog-if 10)
Subsystem: 1002:438a
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at f8ff7000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
0000:00:13.4 0c03: 1002:438b (prog-if 10)
Subsystem: 1002:438b
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 20
Memory at f8ff6000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
0000:00:13.5 0c03: 1002:4386 (prog-if 20)
Subsystem: 1002:4386
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at f8fff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Capabilities: [e4] #0a [20e0]
0000:00:14.0 0c05: 1002:4385 (rev 13)
Subsystem: 1002:4385
Flags: 66MHz, medium devsel
I/O ports at 0b00 [size=16]
Memory at fed00000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] #08 [a802]
0000:00:14.1 0101: 1002:438c (prog-if 8a [Master SecP PriP])
Subsystem: 1002:438c
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 16
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at ff00 [size=16]
Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
0000:00:14.2 0403: 1002:4383
Subsystem: 1002:4383
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at f8ff0000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
0000:00:14.3 0601: 1002:438d
Subsystem: 1002:438d
Flags: bus master, 66MHz, medium devsel, latency 0
0000:00:14.4 0604: 1002:4384 (prog-if 01)
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 88000000-880fffff
0000:00:18.0 0600: 1022:1100
Flags: fast devsel
Capabilities: [80] #08 [2101]
0000:00:18.1 0600: 1022:1101
Flags: fast devsel
0000:00:18.2 0600: 1022:1102
Flags: fast devsel
0000:00:18.3 0600: 1022:1103
Flags: fast devsel
Capabilities: [f0] #0f [0010]
0000:01:00.0 0300: 10de:0392 (rev a1)
Subsystem: 10de:033e
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at f9000000 (64-bit, non-prefetchable) [size=16M]
I/O ports at cc00 [size=128]
Expansion ROM at fbde0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Capabilities: [78] #10 [0001]
0000:02:00.0 0101: 197b:2360 (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: 1043:8202
Flags: bus master, fast devsel, latency 0, IRQ 18
I/O ports at dc00 [size=8]
I/O ports at d880 [size=4]
I/O ports at d800 [size=8]
I/O ports at d480 [size=4]
I/O ports at d400 [size=16]
Memory at fbefe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [68] Power Management version 2
Capabilities: [50] #10 [0211]
0000:03:03.0 0c00: 1106:3044 (rev c0) (prog-if 10)
Subsystem: 1043:81fe
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at fbfff800 (32-bit, non-prefetchable) [size=2K]
I/O ports at ec00 [size=128]
Capabilities: [50] Power Management version 2
0000:03:04.0 0200: 11ab:4320 (rev 13)
Subsystem: 1043:811a
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22
Memory at fbff8000 (32-bit, non-prefetchable) [size=16K]
I/O ports at e800 [size=256]
Expansion ROM at 88000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
root@3[~]#
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
Debian is unable to recognise my SATA-drives. Even when I enter legacy or
normal IDE-mode which should run with normal IDE-drivers it fails. When
booting with AHCI the following error occures:
| unexpected IRQ trap at vector 10
| ata1: qc timeout (cmd 0xec)
| ata1: failed to IDENTIFY (I/O error, err_mask=0x104)
| ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
| ata1: qc timeout (cmd 0xec)
| ata1: failed to IDENTIFY (I/O error, err_mask=0x104)
| ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
| ata1: qc timeout (cmd 0xec)
| ata1: failed to IDENTIFY (I/O error, err_mask=0x104)
| ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
| scsi1 : ahci
I'm not sure wheter this is a module or a driver problem since knoppix
running also with 2.6.17 says here:
| ata1: SATA link up 3.0 Gbps (SStatus 123)
| ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023
88:20ff
| ata1: dev 0 ATA-7, max UDMA7, 781422768 sectors: LBA48
| ata1: dev 0 configured for UDMA/133
and everything works fine then. Since lsmod shows no modules like libata or
ahci when running knoppix it seems the drivers are already compiled in the
kernel. But I'm not sure if knoppix is using vanilla kernels or if there
are patches supplied. If it is for any use I could provide /boot/
config-2.6.17 from the knoppix system.
Even when I try to load the modules by hand with the debian installer they
don't recognise my disk(s).
Please let me know if I could provide any other helpful information.
best regards
Sebastian
- --
Sebastian 'spax' Pape | "Science is like sex: sometimes something
PGP-Key ID: 0x20F748AE | useful comes out, but that is not the
mailto: mail@sebastian-pape.de | reason we are doing it" -- Richard Feynman
--- Do you like to know more? http://www.sebastian-pape.de/ ---
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (MingW32)
iD8DBQFFXxyGFfcNdiD3SK4RAqrQAJ4mv17Yj3ukHwY1R7l9zP6oJKKGzwCg07u/
75jVfzTvRzgFb02zmbOwFPc=
=sqMS
-----END PGP SIGNATURE-----
--- End Message ---