--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: installation-report: minor problems w/ software raid
- From: Beat Seeliger <seb@panter.ch>
- Date: Wed, 4 Oct 2006 16:59:20 +0200
- Message-id: <20061004145920.GA5208@mail.panter.ch>
Package: installation-reports
Version: 2.17
Severity: minor
-- Package-specific info:
Boot method: CD
Image version: etch beta 3 release
Date: <Date and time of the install>
Machine: Recent DELL Server (SATA, Pentium D)
Partitions: <df -Tl will do; the raw partition table is preferred>
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/md0 ext3 9614052 551616 8574068 7% /
tmpfs tmpfs 257840 0 257840 0% /dev/shm
tmpfs tmpfs 10240 96 10144 1% /dev
/dev/md1 ext3 229729620 131260 217928748 1% /var/export
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O ]
Detect network card: [O ]
Configure network: [O ]
Detect CD: [O ]
Load installer modules: [O ]
Detect hard drives: [O ]
Partition hard drives: [E ]
Install base system: [O ]
Clock/timezone setup: [O ]
User/password setup: [O ]
Install tasks: [O ]
Install boot loader: [O ]
Overall install: [O ]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
I recently installed Debian on two machines, especially using the software RAID
capabilities. I would like to mention that the capabilities of
the installer in configuring RAIDs, LVMs and encrypted partitions
are really well-elaborated.
Altough I noticed some (minor) problems, which I would describe
below:
1. Installer let's you create RAID 5 on /
-----------------------------------------
The first machine I installed has 8 IDE 250GB Disk. I tried to
build the following partition:
- First GB of every disk builds RAID 5 mounted on /
- The remaining space on the disks builds a data volume using RAID 5
- no /boot partition
The installer let me apply this setup. But GRUB failed to install
because of the RAID 5 on / (w/o really meaningfull error message).
Lilo failed too, but pointet me to the reason of the problem.
After creating / on a RAID 1, everything worked sound.
2. Really long wait time after creating Software RAID
------------------------------------------------------
The second machine only had two SATA disks (250GB). I used the
following setup
- First 10GBs of each disk builds RAID 1 mounted on /
- Next 1GB of each disk is swap
- Remaining space is used as RAID 1 mounted on /var
After writing the partitions and formatting the disks, the
screen remains empty for a long time. Switching to the console
and watching cat /proc/mdstat showed me, that the RAID rebuild
is in progress and will take about 1 hour. My assumption was,
that the installer waits on that rebuild to proceed. But this
is only an assumption. Anyway, after ca. 5 minutes I returned
on the empty installer screen and pressed CTRL-C. The partition
manager started again. I selected "do not use" for the big
raid partition and everything worked find.
After the installation, I could manually format the big
RAID disk and mount it via fstab w/o problems. My experience
is, that the installation process is really slowed down
when using software RAIDs. The technical reasons for that
are somewhat clear, but maybe it would be possible to
schedule the RAID rebuild after the interactive part
of the installation process? Just an idea, don't know if
raid tools allow such a behaviour...
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20060806)"
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux datast2 2.6.16-2-486 #1 Sat Jul 15 21:23:01 UTC 2006 i686 unknown
lspci -v -t: -[0000:00]-+-00.0 Intel Corporation E7230 Memory Controller Hub
lspci -v -t: +-01.0-[0000:01]--
lspci -v -t: +-1c.0-[0000:02]--
lspci -v -t: +-1c.4-[0000:03]--
lspci -v -t: +-1c.5-[0000:04]----00.0 Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express
lspci -v -t: +-1d.0 Intel Corporation 82801G (ICH7 Family) USB UHCI #1
lspci -v -t: +-1d.1 Intel Corporation 82801G (ICH7 Family) USB UHCI #2
lspci -v -t: +-1d.2 Intel Corporation 82801G (ICH7 Family) USB UHCI #3
lspci -v -t: +-1d.3 Intel Corporation 82801G (ICH7 Family) USB UHCI #4
lspci -v -t: +-1d.7 Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller
lspci -v -t: +-1e.0-[0000:05]----07.0 XGI - Xabre Graphics Inc Volari Z7
lspci -v -t: +-1f.0 Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge
lspci -v -t: +-1f.1 Intel Corporation 82801G (ICH7 Family) IDE Controller
lspci -v -t: +-1f.2 Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE
lspci -v -t: \-1f.3 Intel Corporation 82801G (ICH7 Family) SMBus Controller
lspci -n: 00:00.0 0600: 8086:2778
lspci -n: 00:01.0 0604: 8086:2779
lspci -n: 00:1c.0 0604: 8086:27d0 (rev 01)
lspci -n: 00:1c.4 0604: 8086:27e0 (rev 01)
lspci -n: 00:1c.5 0604: 8086:27e2 (rev 01)
lspci -n: 00:1d.0 0c03: 8086:27c8 (rev 01)
lspci -n: 00:1d.1 0c03: 8086:27c9 (rev 01)
lspci -n: 00:1d.2 0c03: 8086:27ca (rev 01)
lspci -n: 00:1d.3 0c03: 8086:27cb (rev 01)
lspci -n: 00:1d.7 0c03: 8086:27cc (rev 01)
lspci -n: 00:1e.0 0604: 8086:244e (rev e1)
lspci -n: 00:1f.0 0601: 8086:27b8 (rev 01)
lspci -n: 00:1f.1 0101: 8086:27df (rev 01)
lspci -n: 00:1f.2 0101: 8086:27c0 (rev 01)
lspci -n: 00:1f.3 0c05: 8086:27da (rev 01)
lspci -n: 04:00.0 0200: 14e4:1677 (rev 01)
lspci -n: 05:07.0 0300: 18ca:0020
lspci -v: 00:00.0 Host bridge: Intel Corporation E7230 Memory Controller Hub
lspci -v: Subsystem: Dell Unknown device 01ae
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Capabilities: [e0] Vendor Specific Information
lspci -v:
lspci -v: 00:01.0 PCI bridge: Intel Corporation E7230 PCI Express Root Port
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
lspci -v: Memory behind bridge: fea00000-feafffff
lspci -v: Capabilities: [88] #0d [0000]
lspci -v: Capabilities: [80] Power Management version 2
lspci -v: Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
lspci -v: Capabilities: [a0] Express Root Port (Slot+) IRQ 0
lspci -v: Capabilities: [100] Virtual Channel
lspci -v: Capabilities: [140] Unknown (5)
lspci -v:
lspci -v: 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
lspci -v: Memory behind bridge: fe900000-fe9fffff
lspci -v: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
lspci -v: Capabilities: [90] #0d [0000]
lspci -v: Capabilities: [a0] Power Management version 2
lspci -v: Capabilities: [100] Virtual Channel
lspci -v: Capabilities: [180] Unknown (5)
lspci -v:
lspci -v: 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
lspci -v: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
lspci -v: Capabilities: [90] #0d [0000]
lspci -v: Capabilities: [a0] Power Management version 2
lspci -v: Capabilities: [100] Virtual Channel
lspci -v: Capabilities: [180] Unknown (5)
lspci -v:
lspci -v: 00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
lspci -v: Memory behind bridge: fe800000-fe8fffff
lspci -v: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
lspci -v: Capabilities: [90] #0d [0000]
lspci -v: Capabilities: [a0] Power Management version 2
lspci -v: Capabilities: [100] Virtual Channel
lspci -v: Capabilities: [180] Unknown (5)
lspci -v:
lspci -v: 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
lspci -v: Subsystem: Dell Unknown device 01ae
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 233
lspci -v: I/O ports at ff80 [size=32]
lspci -v:
lspci -v: 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
lspci -v: Subsystem: Dell Unknown device 01ae
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 50
lspci -v: I/O ports at ff60 [size=32]
lspci -v:
lspci -v: 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
lspci -v: Subsystem: Dell Unknown device 01ae
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 58
lspci -v: I/O ports at ff40 [size=32]
lspci -v:
lspci -v: 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
lspci -v: Subsystem: Dell Unknown device 01ae
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 66
lspci -v: I/O ports at ff20 [size=32]
lspci -v:
lspci -v: 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20)
lspci -v: Subsystem: Dell Unknown device 01ae
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 233
lspci -v: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v: Capabilities: [58] Debug port
lspci -v:
lspci -v: 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
lspci -v: I/O behind bridge: 0000d000-0000dfff
lspci -v: Memory behind bridge: fe600000-fe7fffff
lspci -v: Prefetchable memory behind bridge: 00000000fc000000-00000000fdf00000
lspci -v: Capabilities: [50] #0d [0000]
lspci -v:
lspci -v: 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
lspci -v: Flags: bus master, medium devsel, latency 0
lspci -v: Capabilities: [e0] Vendor Specific Information
lspci -v:
lspci -v: 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
lspci -v: Subsystem: Dell Unknown device 01ae
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 169
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at ffa0 [size=16]
lspci -v:
lspci -v: 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
lspci -v: Subsystem: Dell Unknown device 01ae
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 225
lspci -v: I/O ports at fe00 [size=8]
lspci -v: I/O ports at fe10 [size=4]
lspci -v: I/O ports at fe20 [size=8]
lspci -v: I/O ports at fe30 [size=4]
lspci -v: I/O ports at fea0 [size=16]
lspci -v: Memory at 30000000 (32-bit, non-prefetchable) [size=1K]
lspci -v: Capabilities: [70] Power Management version 2
lspci -v:
lspci -v: 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
lspci -v: Subsystem: Dell Unknown device 01ae
lspci -v: Flags: medium devsel, IRQ 10
lspci -v: I/O ports at ece0 [size=32]
lspci -v:
lspci -v: 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
lspci -v: Subsystem: Dell Unknown device 01ae
lspci -v: Flags: bus master, fast devsel, latency 0, IRQ 177
lspci -v: Memory at fe8f0000 (64-bit, non-prefetchable) [size=64K]
lspci -v: Capabilities: [48] Power Management version 2
lspci -v: Capabilities: [50] Vital Product Data
lspci -v: Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
lspci -v: Capabilities: [d0] Express Endpoint IRQ 0
lspci -v: Capabilities: [100] Advanced Error Reporting
lspci -v: Capabilities: [13c] Virtual Channel
lspci -v:
lspci -v: 05:07.0 VGA compatible controller: XGI - Xabre Graphics Inc Volari Z7
lspci -v: Subsystem: Dell Unknown device 01ae
lspci -v: Flags: 66MHz, medium devsel
lspci -v: BIST result: 00
lspci -v: Memory at fc000000 (32-bit, prefetchable) [size=32M]
lspci -v: Memory at fe6c0000 (32-bit, non-prefetchable) [size=256K]
lspci -v: I/O ports at dc80 [size=128]
lspci -v: Expansion ROM at fe600000 [disabled] [size=64K]
lspci -v: Capabilities: [40] Power Management version 2
lspci -v:
lspci -x: 00:00.0 Host bridge: Intel Corporation E7230 Memory Controller Hub
lspci -x: 00: 86 80 78 27 06 01 90 20 00 00 00 06 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 ae 01
lspci -x: 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:01.0 PCI bridge: Intel Corporation E7230 PCI Express Root Port
lspci -x: 00: 86 80 79 27 07 05 10 00 00 00 04 06 10 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 00
lspci -x: 20: a0 fe a0 fe f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 88 00 00 00 00 00 00 00 0b 01 02 00
lspci -x:
lspci -x: 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
lspci -x: 00: 86 80 d0 27 07 05 10 00 01 00 04 06 10 00 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 02 02 00 f0 00 00 20
lspci -x: 20: 90 fe 90 fe f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 02 00
lspci -x:
lspci -x: 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01)
lspci -x: 00: 86 80 e0 27 07 05 10 00 01 00 04 06 10 00 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 03 03 00 f0 00 00 20
lspci -x: 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 02 00
lspci -x:
lspci -x: 00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01)
lspci -x: 00: 86 80 e2 27 07 05 10 00 01 00 04 06 10 00 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 04 04 00 f0 00 00 20
lspci -x: 20: 80 fe 80 fe f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 02 02 00
lspci -x:
lspci -x: 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
lspci -x: 00: 86 80 c8 27 05 00 80 02 01 00 03 0c 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 81 ff 00 00 00 00 00 00 00 00 00 00 28 10 ae 01
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00
lspci -x:
lspci -x: 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
lspci -x: 00: 86 80 c9 27 05 00 80 02 01 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 61 ff 00 00 00 00 00 00 00 00 00 00 28 10 ae 01
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00
lspci -x:
lspci -x: 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
lspci -x: 00: 86 80 ca 27 05 00 80 02 01 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 41 ff 00 00 00 00 00 00 00 00 00 00 28 10 ae 01
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 03 00 00
lspci -x:
lspci -x: 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
lspci -x: 00: 86 80 cb 27 05 00 80 02 01 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 21 ff 00 00 00 00 00 00 00 00 00 00 28 10 ae 01
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 04 00 00
lspci -x:
lspci -x: 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
lspci -x: 00: 86 80 cc 27 06 01 90 02 01 20 03 0c 00 00 00 00
lspci -x: 10: 00 08 a8 ff 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 ae 01
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 09 01 00 00
lspci -x:
lspci -x: 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
lspci -x: 00: 86 80 4e 24 07 01 10 00 e1 01 04 06 00 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 05 05 20 d0 d0 80 22
lspci -x: 20: 60 fe 70 fe 01 fc f1 fd 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 0a 00
lspci -x:
lspci -x: 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
lspci -x: 00: 86 80 b8 27 07 01 10 02 01 00 01 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
lspci -x: 00: 86 80 df 27 05 00 88 02 01 8a 01 01 00 00 00 00
lspci -x: 10: f1 01 00 00 f5 03 00 00 71 01 00 00 75 03 00 00
lspci -x: 20: a1 ff 00 00 00 00 00 00 00 00 00 00 28 10 ae 01
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
lspci -x:
lspci -x: 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01)
lspci -x: 00: 86 80 c0 27 07 00 b0 02 01 8f 01 01 00 00 00 00
lspci -x: 10: 01 fe 00 00 11 fe 00 00 21 fe 00 00 31 fe 00 00
lspci -x: 20: a1 fe 00 00 00 00 00 30 00 00 00 00 28 10 ae 01
lspci -x: 30: 00 00 00 00 70 00 00 00 00 00 00 00 05 03 00 00
lspci -x:
lspci -x: 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
lspci -x: 00: 86 80 da 27 01 01 80 02 01 00 05 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: e1 ec 00 00 00 00 00 00 00 00 00 00 28 10 ae 01
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
lspci -x:
lspci -x: 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
lspci -x: 00: e4 14 77 16 06 00 10 00 01 00 00 02 10 00 00 00
lspci -x: 10: 04 00 8f fe 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 07 00 00 00 28 10 ae 01
lspci -x: 30: 00 00 00 00 48 00 00 00 00 00 00 00 0a 01 00 00
lspci -x:
lspci -x: 05:07.0 VGA compatible controller: XGI - Xabre Graphics Inc Volari Z7
lspci -x: 00: ca 18 20 00 03 00 30 02 00 00 00 03 00 00 00 80
lspci -x: 10: 08 00 00 fc 00 00 6c fe 81 dc 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 ae 01
lspci -x: 30: 00 00 70 fe 40 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lsmod: Module Size Used by
lsmod: qnx4 10612 0
lsmod: ntfs 189580 0
lsmod: raid5 22016 0
lsmod: xor 14088 1 raid5
lsmod: raid1 19200 2
lsmod: raid0 7936 0
lsmod: md_mod 64276 4 raid5,raid1,raid0
lsmod: xfs 483476 0
lsmod: exportfs 5248 1 xfs
lsmod: reiserfs 218352 0
lsmod: jfs 158556 0
lsmod: ext3 115976 1
lsmod: jbd 46996 1 ext3
lsmod: vfat 11520 0
lsmod: fat 46876 1 vfat
lsmod: tg3 88836 0
lsmod: nls_iso8859_1 4224 0
lsmod: rsrc_nonstatic 12160 0
lsmod: pcmcia_core 37392 1 rsrc_nonstatic
lsmod: isofs 32192 0
lsmod: ide_disk 14976 0
lsmod: ide_generic 1408 0 [permanent]
lsmod: aec62xx 6784 0 [permanent]
lsmod: alim15x3 11024 0 [permanent]
lsmod: amd74xx 12956 0 [permanent]
lsmod: atiixp 5392 0 [permanent]
lsmod: cmd64x 10012 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7812 0 [permanent]
lsmod: ns87415 4268 0 [permanent]
lsmod: opti621 4100 0 [permanent]
lsmod: pdc202xx_new 8064 0 [permanent]
lsmod: pdc202xx_old 9600 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6656 0 [permanent]
lsmod: serverworks 8328 0 [permanent]
lsmod: siimage 11008 0 [permanent]
lsmod: sis5513 12300 0 [permanent]
lsmod: slc90e66 5120 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 4100 0 [permanent]
lsmod: via82cxxx 8196 0 [permanent]
lsmod: usb_storage 69696 0
lsmod: vga16fb 11528 0
lsmod: vgastate 7680 1 vga16fb
lsmod: usbserial 28364 0
lsmod: usbhid 32352 0
lsmod: usbkbd 6656 0
lsmod: thermal 13192 0
lsmod: processor 21952 1 thermal
lsmod: fan 4740 0
lsmod: sd_mod 16528 8
lsmod: ide_cd 35488 0
lsmod: cdrom 32176 1 ide_cd
lsmod: generic 4356 0 [permanent]
lsmod: ehci_hcd 27144 0
lsmod: uhci_hcd 27152 0
lsmod: usbcore 111008 7 usb_storage,usbserial,usbhid,usbkbd,ehci_hcd,uhci_hcd
lsmod: ata_piix 9988 6
lsmod: piix 9092 0 [permanent]
lsmod: ide_core 111280 30 ide_disk,ide_generic,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_new,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,generic,piix
lsmod: libata 52752 1 ata_piix
lsmod: scsi_mod 122444 3 usb_storage,sd_mod,libata
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 257796 456 257340 0% /dev
df: tmpfs 257796 456 257340 0% /dev
df: tmpfs 257796 456 257340 0% /.dev
df: /dev/md/0 9614052 386140 8739544 4% /target
free: total used free shared buffers
free: Mem: 515592 340956 174636 0 4892
free: Swap: 1959912 0 1959912
free: Total: 2475504 340956 2134548
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 34: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 35: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 4
/proc/cpuinfo: model name : Intel(R) Pentium(R) D CPU 2.80GHz
/proc/cpuinfo: stepping : 7
/proc/cpuinfo: cpu MHz : 2793.174
/proc/cpuinfo: cache size : 1024 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 5
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl cid cx16 xtpr lahf_lm
/proc/cpuinfo: bogomips : 5591.73
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 03c0-03df : vesafb
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0800-0803 : PM1a_EVT_BLK
/proc/ioports: 0804-0805 : PM1a_CNT_BLK
/proc/ioports: 0808-080b : PM_TMR
/proc/ioports: 0810-0815 : ACPI CPU throttle
/proc/ioports: 0828-082f : GPE0_BLK
/proc/ioports: 0860-08ff : pnp 00:01
/proc/ioports: 0c00-0c7f : pnp 00:01
/proc/ioports: d000-dfff : PCI Bus #05
/proc/ioports: dc80-dcff : 0000:05:07.0
/proc/ioports: ece0-ecff : 0000:00:1f.3
/proc/ioports: fe00-fe07 : 0000:00:1f.2
/proc/ioports: fe00-fe07 : libata
/proc/ioports: fe10-fe13 : 0000:00:1f.2
/proc/ioports: fe10-fe13 : libata
/proc/ioports: fe20-fe27 : 0000:00:1f.2
/proc/ioports: fe20-fe27 : libata
/proc/ioports: fe30-fe33 : 0000:00:1f.2
/proc/ioports: fe30-fe33 : libata
/proc/ioports: fea0-feaf : 0000:00:1f.2
/proc/ioports: fea0-feaf : libata
/proc/ioports: ff20-ff3f : 0000:00:1d.3
/proc/ioports: ff20-ff3f : uhci_hcd
/proc/ioports: ff40-ff5f : 0000:00:1d.2
/proc/ioports: ff40-ff5f : uhci_hcd
/proc/ioports: ff60-ff7f : 0000:00:1d.1
/proc/ioports: ff60-ff7f : uhci_hcd
/proc/ioports: ff80-ff9f : 0000:00:1d.0
/proc/ioports: ff80-ff9f : uhci_hcd
/proc/ioports: ffa0-ffaf : 0000:00:1f.1
/proc/ioports: ffa0-ffa7 : ide0
/proc/iomem: 00000000-0009ffff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000ca000-000cbfff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-1fe8cbff : System RAM
/proc/iomem: 00100000-00273102 : Kernel code
/proc/iomem: 00273103-00301c23 : Kernel data
/proc/iomem: 1fe8cc00-1fe8ebff : ACPI Non-volatile Storage
/proc/iomem: 1fe8ec00-1fe90bff : ACPI Tables
/proc/iomem: 1fe90c00-1fffffff : reserved
/proc/iomem: 30000000-300003ff : 0000:00:1f.2
/proc/iomem: 30000000-300003ff : libata
/proc/iomem: f0000000-f3ffffff : reserved
/proc/iomem: fc000000-fdffffff : PCI Bus #05
/proc/iomem: fc000000-fdffffff : 0000:05:07.0
/proc/iomem: fc000000-fcffffff : vesafb
/proc/iomem: fe600000-fe7fffff : PCI Bus #05
/proc/iomem: fe600000-fe60ffff : 0000:05:07.0
/proc/iomem: fe6c0000-fe6fffff : 0000:05:07.0
/proc/iomem: fe800000-fe8fffff : PCI Bus #04
/proc/iomem: fe8f0000-fe8fffff : 0000:04:00.0
/proc/iomem: fe8f0000-fe8fffff : tg3
/proc/iomem: fe900000-fe9fffff : PCI Bus #02
/proc/iomem: fea00000-feafffff : PCI Bus #01
/proc/iomem: fec00000-fed003ff : reserved
/proc/iomem: fed20000-fed9ffff : reserved
/proc/iomem: fee00000-feefffff : reserved
/proc/iomem: ffa80800-ffa80bff : 0000:00:1d.7
/proc/iomem: ffa80800-ffa80bff : ehci_hcd
/proc/iomem: ffb00000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 270741 IO-APIC-edge timer
/proc/interrupts: 9: 0 IO-APIC-level acpi
/proc/interrupts: 14: 1971 IO-APIC-edge ide0
/proc/interrupts: 50: 0 IO-APIC-level uhci_hcd:usb2
/proc/interrupts: 58: 0 IO-APIC-level uhci_hcd:usb3
/proc/interrupts: 66: 2682 IO-APIC-level uhci_hcd:usb4
/proc/interrupts: 177: 10915 IO-APIC-level eth0
/proc/interrupts: 225: 210663 IO-APIC-level libata
/proc/interrupts: 233: 4 IO-APIC-level uhci_hcd:usb1, ehci_hcd:usb5
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 270689
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 515592 kB
/proc/meminfo: MemFree: 174804 kB
/proc/meminfo: Buffers: 4892 kB
/proc/meminfo: Cached: 281332 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 209480 kB
/proc/meminfo: Inactive: 90716 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 515592 kB
/proc/meminfo: LowFree: 174804 kB
/proc/meminfo: SwapTotal: 1959912 kB
/proc/meminfo: SwapFree: 1959912 kB
/proc/meminfo: Dirty: 816 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 15828 kB
/proc/meminfo: Slab: 29764 kB
/proc/meminfo: CommitLimit: 2217708 kB
/proc/meminfo: Committed_AS: 17828 kB
/proc/meminfo: PageTables: 232 kB
/proc/meminfo: VmallocTotal: 777936 kB
/proc/meminfo: VmallocUsed: 9508 kB
/proc/meminfo: VmallocChunk: 767784 kB
/proc/bus/input/devices: I: Bus=0003 Vendor=0a81 Product=0101 Version=0110
/proc/bus/input/devices: N: Name="CHESEN USB Keyboard"
/proc/bus/input/devices: P: Phys=/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120003
/proc/bus/input/devices: B: KEY=7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: LED=1f
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=0a81 Product=0101 Version=0110
/proc/bus/input/devices: N: Name="CHESEN USB Keyboard"
/proc/bus/input/devices: P: Phys=usb-0000:00:1d.3-1/input1
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=3
/proc/bus/input/devices: B: KEY=20000 3878 d801d101 1e0000 0 0 0
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 60 structures occupying 2201 bytes.
dmidecode: Table at 0x000F0450.
dmidecode:
dmidecode: Handle 0xDA00, DMI type 218, 53 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: DA 35 00 DA B2 00 17 0B 0E 38 00 00 80 00 80 01
dmidecode: 00 02 80 02 80 01 00 00 A0 00 A0 01 00 58 00 58
dmidecode: 00 01 00 59 00 59 00 01 00 05 80 05 80 01 00 FF
dmidecode: FF 00 00 00 00
dmidecode:
dmidecode: Handle 0xDA01, DMI type 218, 35 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: DA 23 01 DA B2 00 17 0B 0E 38 00 10 F5 10 F5 00
dmidecode: 00 11 F5 11 F5 00 00 12 F5 12 F5 00 00 FF FF 00
dmidecode: 00 00 00
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: Vendor: Dell Inc.
dmidecode: Version: A03
dmidecode: Release Date: 04/24/2006
dmidecode: Address: 0xF0000
dmidecode: Runtime Size: 64 kB
dmidecode: ROM Size: 512 kB
dmidecode: Characteristics:
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: EDD is supported
dmidecode: Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: LS-120 boot is supported
dmidecode: BIOS boot specification is supported
dmidecode: Function key-initiated network boot is supported
dmidecode:
dmidecode: Handle 0x0100, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer: Dell Inc.
dmidecode: Product Name: PowerEdge SC430
dmidecode: Version: Not Specified
dmidecode: Serial Number: 7VZRD2J
dmidecode: UUID: 44454C4C-5600-105A-8052-B7C04F44324A
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0200, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: Dell Inc.
dmidecode: Product Name: 0NJ886
dmidecode: Version:
dmidecode: Serial Number: ..CN7082165OH0DJ.
dmidecode:
dmidecode: Handle 0x0300, DMI type 3, 13 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: Dell Inc.
dmidecode: Type: Tower
dmidecode: Lock: Not Present
dmidecode: Version: Not Specified
dmidecode: Serial Number: 7VZRD2J
dmidecode: Asset Tag:
dmidecode: Boot-up State: Warning
dmidecode: Power Supply State: Safe
dmidecode: Thermal State: Safe
dmidecode: Security Status: None
dmidecode:
dmidecode: Handle 0x0400, DMI type 4, 32 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: Microprocessor
dmidecode: Type: Central Processor
dmidecode: Family: Pentium 4
dmidecode: Manufacturer: Intel
dmidecode: ID: 47 0F 00 00 FF FB EB BF
dmidecode: Signature: Type 0, Family 15, Model 4, Stepping 7
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: CLFSH (CLFLUSH instruction supported)
dmidecode: DS (Debug store)
dmidecode: ACPI (ACPI supported)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: SSE2 (Streaming SIMD extensions 2)
dmidecode: SS (Self-snoop)
dmidecode: HTT (Hyper-threading technology)
dmidecode: TM (Thermal monitor supported)
dmidecode: PBE (Pending break enabled)
dmidecode: Version: Not Specified
dmidecode: Voltage: 0.6 V
dmidecode: External Clock: 800 MHz
dmidecode: Max Speed: 4000 MHz
dmidecode: Current Speed: 2800 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: ZIF Socket
dmidecode: L1 Cache Handle: 0x0700
dmidecode: L2 Cache Handle: 0x0701
dmidecode: L3 Cache Handle: Not Provided
dmidecode:
dmidecode: Handle 0x0700, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Not Specified
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 16 KB
dmidecode: Maximum Size: 16 KB
dmidecode: Supported SRAM Types:
dmidecode: Other
dmidecode: Installed SRAM Type: Other
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: None
dmidecode: System Type: Data
dmidecode: Associativity: 8-way Set-associative
dmidecode:
dmidecode: Handle 0x0701, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Not Specified
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Varies With Memory Address
dmidecode: Location: Internal
dmidecode: Installed Size: 2048 KB
dmidecode: Maximum Size: 2048 KB
dmidecode: Supported SRAM Types:
dmidecode: Other
dmidecode: Installed SRAM Type: Other
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Unified
dmidecode: Associativity: 8-way Set-associative
dmidecode:
dmidecode: Handle 0x0704, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0801, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SERIAL1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: DB-9 male
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x0805, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0806, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB2
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0807, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB3
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0808, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB4
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0809, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB5
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x080A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB6
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x080B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB7
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x080C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB8
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x080D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: ENET
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: RJ-45
dmidecode: Port Type: Network Port
dmidecode:
dmidecode: Handle 0x0901, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: SLOT1
dmidecode: Type: x1 PCI Express
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0902, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: SLOT2
dmidecode: Type: x8 PCI Express
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0903, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: SLOT3
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 3
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0904, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: SLOT4
dmidecode: Type: x4 PCI Express
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0905, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: SLOT5
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 5
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0906, DMI type 126, 13 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0A02, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Ethernet
dmidecode: Status: Enabled
dmidecode: Description: Broadcom 5751 NetXtreme Gigabit Controller
dmidecode:
dmidecode: Handle 0x0B00, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: String 1: www.dell.com
dmidecode:
dmidecode: Handle 0x0D00, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 1
dmidecode: en|US|iso8859-1
dmidecode: Currently Installed Language: en|US|iso8859-1
dmidecode:
dmidecode: Handle 0x0F00, DMI type 15, 31 bytes
dmidecode: System Event Log
dmidecode: Area Length: 2049 bytes
dmidecode: Header Start Offset: 0x0000
dmidecode: Header Length: 16 bytes
dmidecode: Data Start Offset: 0x0010
dmidecode: Access Method: Memory-mapped physical 32-bit address
dmidecode: Access Address: 0xFFF81000
dmidecode: Status: Valid, Not Full
dmidecode: Change Token: 0x00000016
dmidecode: Header Format: Type 1
dmidecode: Supported Log Type Descriptors: 4
dmidecode: Descriptor 1: POST error
dmidecode: Data Format 1: POST results bitmap
dmidecode: Descriptor 2: System limit exceeded
dmidecode: Data Format 2: System management
dmidecode: Descriptor 3: Log area reset/cleared
dmidecode: Data Format 3: None
dmidecode: Descriptor 4: Multi-bit ECC memory error
dmidecode: Data Format 4: Handle
dmidecode:
dmidecode: Handle 0x1000, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: Maximum Capacity: 4 GB
dmidecode: Error Information Handle: No Error
dmidecode: Number Of Devices: 4
dmidecode:
dmidecode: Handle 0x1100, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: No Error
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 256 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM_1
dmidecode: Bank Locator: Not Specified
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 533 MHz (1.9 ns)
dmidecode: Manufacturer: C100000000000000
dmidecode: Serial Number: 04021B23
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: 72T32000HU3.7A
dmidecode:
dmidecode: Handle 0x1101, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: No Error
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM_3
dmidecode: Bank Locator: Not Specified
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 533 MHz (1.9 ns)
dmidecode: Manufacturer: FFFFFFFFFFFFFFFF
dmidecode: Serial Number: FFFFFFFF
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number:
dmidecode:
dmidecode: Handle 0x1102, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: No Error
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 256 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM_2
dmidecode: Bank Locator: Not Specified
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 533 MHz (1.9 ns)
dmidecode: Manufacturer: C100000000000000
dmidecode: Serial Number: 04022223
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: 72T32000HU3.7A
dmidecode:
dmidecode: Handle 0x1103, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: No Error
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM_4
dmidecode: Bank Locator: Not Specified
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 533 MHz (1.9 ns)
dmidecode: Manufacturer: FFFFFFFFFFFFFFFF
dmidecode: Serial Number: FFFFFFFF
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number:
dmidecode:
dmidecode: Handle 0x1200, DMI type 126, 23 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x1301, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Array Handle: 0x1000
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x1402, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0000FFFFFFF
dmidecode: Range Size: 256 MB
dmidecode: Physical Device Handle: 0x1100
dmidecode: Memory Array Mapped Address Handle: 0x1301
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x1403, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x1404, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00010000000
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 256 MB
dmidecode: Physical Device Handle: 0x1102
dmidecode: Memory Array Mapped Address Handle: 0x1301
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x1405, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x1800, DMI type 24, 5 bytes
dmidecode: Hardware Security
dmidecode: Power-On Password Status: Enabled
dmidecode: Keyboard Password Status: Not Implemented
dmidecode: Administrator Password Status: Enabled
dmidecode: Front Panel Reset Status: Not Implemented
dmidecode:
dmidecode: Handle 0x1900, DMI type 25, 9 bytes
dmidecode: System Power Controls
dmidecode: Next Scheduled Power-on: *-* 00:00:00
dmidecode:
dmidecode: Handle 0x1B10, DMI type 27, 12 bytes
dmidecode: Cooling Device
dmidecode: Type: Fan
dmidecode: Status: OK
dmidecode: OEM-specific Information: 0x0000DD00
dmidecode:
dmidecode: Handle 0x1B11, DMI type 27, 12 bytes
dmidecode: Cooling Device
dmidecode: Type: Fan
dmidecode: Status: OK
dmidecode: OEM-specific Information: 0x0000DD01
dmidecode:
dmidecode: Handle 0x1B12, DMI type 126, 12 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x2000, DMI type 32, 11 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x8100, DMI type 129, 8 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: 81 08 00 81 01 01 02 01
dmidecode: Strings:
dmidecode: Intel_ASF
dmidecode: Dell_ASF_002
dmidecode:
dmidecode: Handle 0x8800, DMI type 136, 6 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: 88 06 00 88 5A 5A
dmidecode:
dmidecode: Handle 0xD000, DMI type 208, 10 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D0 0A 00 D0 01 03 FE 00 AE 01
dmidecode:
dmidecode: Handle 0xD200, DMI type 210, 12 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D2 0C 00 D2 F8 03 04 03 06 80 04 05
dmidecode:
dmidecode: Handle 0xD400, DMI type 212, 222 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D4 DE 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
dmidecode: 01 43 00 11 FE 00 0F 00 25 FC 00 10 00 25 FC 01
dmidecode: 11 00 25 FC 02 12 00 25 FC 03 07 00 23 8F 00 08
dmidecode: 00 23 F3 00 09 00 23 F3 04 0A 00 23 F3 08 0B 00
dmidecode: 23 8F 10 0C 00 23 8F 20 0E 00 23 8F 30 0D 00 23
dmidecode: 8C 40 A6 00 23 8C 41 A7 00 23 8C 42 4E 01 28 DF
dmidecode: 00 4F 01 28 DF 20 8C 00 22 FE 00 8D 00 22 FE 01
dmidecode: 9B 00 25 3F 40 9C 00 25 3F 00 09 01 25 3F 80 A1
dmidecode: 00 26 F3 00 A2 00 26 F3 08 A3 00 26 F3 04 9F 00
dmidecode: 26 FD 02 A0 00 26 FD 00 9D 00 11 FB 04 9E 00 11
dmidecode: FB 00 54 01 23 7F 00 55 01 23 7F 80 5C 00 78 BF
dmidecode: 40 5D 00 78 BF 00 04 80 78 F5 0A 01 A0 78 F5 00
dmidecode: 93 00 7B 7F 80 94 00 7B 7F 00 8A 00 37 DF 20 8B
dmidecode: 00 37 DF 00 03 C0 67 00 05 FF FF 00 00 00
dmidecode:
dmidecode: Handle 0xD401, DMI type 212, 187 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D4 BB 01 D4 70 00 71 00 03 40 59 6D 2D 00 59 FC
dmidecode: 02 2E 00 59 FC 00 6E 00 59 FC 01 27 01 59 FC 03
dmidecode: 28 00 59 3F 00 29 00 59 3F 40 2A 00 59 3F 80 2B
dmidecode: 00 5A 00 00 2C 00 5B 00 00 55 00 59 F3 00 6D 00
dmidecode: 59 F3 04 8E 00 59 F3 08 8F 00 59 F3 00 1C 00 55
dmidecode: FB 04 1D 00 55 FB 00 19 00 55 E7 00 1A 00 55 E7
dmidecode: 08 1B 00 55 E7 10 F5 00 58 BF 40 F6 00 58 BF 00
dmidecode: EB 00 55 FE 00 EA 00 55 FE 01 01 01 51 3F 00 02
dmidecode: 01 51 3F 40 03 01 51 3F 80 04 01 51 3F C0 40 01
dmidecode: 54 EF 00 41 01 54 EF 10 42 01 54 F7 00 43 01 54
dmidecode: F7 08 4A 01 54 FB 00 4B 01 54 FB 04 68 01 56 BF
dmidecode: 00 69 01 56 BF 40 FF FF 00 00 00
dmidecode:
dmidecode: Handle 0xD402, DMI type 212, 92 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D4 5C 02 D4 70 00 71 00 00 10 2D 2E 2D 01 21 FE
dmidecode: 01 2E 01 21 FE 00 90 00 11 CF 00 91 00 11 CF 20
dmidecode: 92 00 11 CF 10 E2 00 27 7F 00 E3 00 27 7F 80 E4
dmidecode: 00 27 BF 00 E5 00 27 BF 40 D1 00 22 7F 80 D2 00
dmidecode: 22 7F 00 83 00 5F 00 00 84 00 60 00 00 2B 01 11
dmidecode: 7F 80 2C 01 11 7F 00 FF FF 00 00 00
dmidecode:
dmidecode: Handle 0xD403, DMI type 212, 97 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D4 61 03 D4 70 00 71 00 03 40 59 6D 17 01 52 FE
dmidecode: 00 18 01 52 FE 01 19 01 52 FB 00 1A 01 52 FB 04
dmidecode: 1B 01 52 FD 00 1C 01 52 FD 02 1D 01 52 F7 00 1E
dmidecode: 01 52 F7 08 09 40 52 EF 00 08 40 52 EF 10 0B 40
dmidecode: 52 DF 00 0A 40 52 DF 20 0D 40 52 BF 00 0C 40 52
dmidecode: BF 40 0F 40 52 7F 00 0E 40 52 7F 80 FF FF 00 00
dmidecode: 00
dmidecode:
dmidecode: Handle 0xDD00, DMI type 221, 19 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: DD 13 00 DD 00 01 00 00 00 10 F5 00 00 00 00 00
dmidecode: 00 00 00
dmidecode:
dmidecode: Handle 0xDD01, DMI type 221, 19 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: DD 13 01 DD 00 01 00 00 00 11 F5 00 00 00 00 00
dmidecode: 00 00 00
dmidecode:
dmidecode: Handle 0xDD02, DMI type 221, 19 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: DD 13 02 DD 00 01 00 00 00 12 F5 00 00 00 00 00
dmidecode: 00 00 00
dmidecode:
dmidecode: Handle 0xDE00, DMI type 222, 16 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: DE 10 00 DE C1 01 FF FF 00 00 00 00 00 00 00 01
dmidecode:
dmidecode: Handle 0x7F00, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: usb-storage-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: USB storage support
Package: scsi-common-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-common-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di
Description: Very common SCSI drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.17
Depends: di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.22
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6-15
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.07
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: floppy-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: floppy-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Floppy driver
Package: lowmemcheck
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.11
Provides: retriever
Depends: cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.13
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.42), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.32
Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.32
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.42), cdebconf-udeb (>= 0.97)
Description: Miscellaneous utilities for the debian installer
Package: serial-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: serial-modules
Depends: kernel-image-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Description: Serial drivers
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.104+b1
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: ide-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: ide-core-modules
Depends: kernel-image-2.6.16-2-486-di
Description: IDE support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.33
Depends: di-utils (>= 1.24)
Description: Skeleton root filesystem used by debian-installer
Package: pcmcia-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: pcmcia-modules
Depends: kernel-image-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Description: Common PCMCIA drivers
Package: udev-udeb
Status: install ok unpacked
Version: 0.093-1
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: scsi-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-core-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Core SCSI subsystem
Package: firewire-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.16-2-486-di, kernel-image-2.6.16-2-486-di
Description: Core FireWire drivers
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-3
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: pcmcia-storage-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.16-2-486-di, ide-core-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Description: PCMCIA storage drivers
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-3
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: usb-discover
Status: install ok unpacked
Version: 1.05
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.4
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.3.12-2
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.1-1)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.104+b1
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.43), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: load-cdrom
Status: install ok installed
Version: 1.11
Depends: cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.104+b1
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: iso-3166-udeb
Status: install ok installed
Version: 0.52-1
Description: provides iso_3166.tab file
Package: cdrom-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: cdrom-core-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, ide-modules-2.6.16-2-486-di
Description: CDROM support
Package: fat-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: fat-modules
Depends: kernel-image-2.6.16-2-486-di
Description: FAT filesystem support
Package: floppy-retriever
Status: install ok unpacked
Version: 1.09
Provides: retriever
Depends: mountfloppy
Description: Fetches modules from a floppy
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-2
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.17
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.40
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.43)
Description: Hardware architecture detector
Package: fb-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: fb-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Frame buffer support
Package: save-logs
Status: install ok unpacked
Version: 2.17
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.32
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.24
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: kernel-image-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: ide-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: ide-modules
Depends: kernel-image-2.6.16-2-486-di, ide-core-modules-2.6.16-2-486-di
Description: IDE drivers
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.0.0-7
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-2
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.1-2
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.0-2
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: input-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: input-modules
Depends: kernel-image-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: Input devices support
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.32
Description: Terminfo entries needed by newt/slang in debian installer
Package: scsi-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, parport-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Description: SCSI drivers
Package: hw-detect
Status: install ok installed
Version: 1.40
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.29
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.43
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: acpi-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: acpi-modules
Depends: kernel-image-2.6.16-2-486-di
Description: ACPI support modules
Package: firmware-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: firmware-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Firmware request modules
Package: sata-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: sata-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di
Description: SATA drivers
Package: cdrom-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: cdrom-modules
Depends: ide-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, kernel-image-2.6.16-2-486-di
Description: Esoteric CDROM drivers
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.17
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.6
Depends: di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.104
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: file-preseed
Status: install ok unpacked
Version: 1.17
Depends: di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: usb-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-modules
Depends: kernel-image-2.6.16-2-486-di
Description: USB support
Package: usb-serial-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-serial-modules
Depends: kernel-image-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: USB serial drivers
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.104+b1
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.4
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: cdrom-detect
Status: install ok installed
Version: 1.16
Depends: hw-detect, di-utils (>= 1.15)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: parport-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: parport-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Parallel port support
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-2.6-20060806
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: cdrom-detect
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: choose-mirror-bin
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: apt-mirror-setup, base-installer (>= 1.49)
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.64
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: cdebconf-newt-entropy
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.4
Depends: cdebconf-newt-udeb, libc6 (>= 2.3.6-6), libnewt0.52
Description: cdebconf newt plugin for reading from /dev/random
cdebconf plugin to facilitate reading random data from /dev/random.
Asks the user to enter random characters on the keyboard and shows a
progressbar with percent-of-data read.
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.04
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: os-prober, tzsetup-udeb, mounted-partitions
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: crypto-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: crypto-modules
Description: crypto modules
This package contains crypto modules.
Package: cryptsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 400
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Version: 2:1.0.3-3
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2), libpopt0-udeb (>= 1.10), libuuid1-udeb, dmsetup-udeb
Description: configures encrypted block devices
Since kernel 2.6.4, encrypted filesystem support is provided by the device
mapper target dm-crypt. This utility provides a command-line interface for
configuring this facility. It has integrated support for LUKS.
.
cryptsetup is backwards compatible with the on-disk format of cryptoloop,
but also supports more secure formats. This package also includes support
for automatically configuring encrypted devices at boot time via the config
file /etc/crypttab. When combined with newer versions of the debian
initrd-tools and standard debian kernels, cryptoroot is also supported.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.32
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.42)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: dmsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.07-1
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Kernel Device Mapper userspace library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
.
This package contains a utility for modifying device mappings.
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 352
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 88
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.6
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, firmware-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
This udeb will install elilo on the hard disk.
Installer-Menu-Item: 76
Package: ethdetect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: ethernet-card-detection
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18
Package: ext3-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 140
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-10
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.4
Depends: archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: gnupg-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 664
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.3-2
Depends: libc6 (>= 2.3.6-6), libusb-0.1-udeb (>= 2:0.1.12), zlib1g-udeb (>= 1:1.2.1)
Description: GNU privacy guard - a free PGP replacement
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG packaged in minimal form for use in debian-installer.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1592
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6-15
Provides: libc6, libc-udeb, glibc-2.3.6-2, glibc-2.3.5-3
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.07-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libiw28-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 24
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 328
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libpopt0-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Paul Martin <pm@debian.org>
Version: 1.10-2
Depends: libc6 (>= 2.3.6-6)
Description: lib for parsing cmdline parameters
Popt was heavily influenced by the getopt() and getopt_long() functions,
but it allows more powerful argument expansion. It can parse arbitrary
argv[] style arrays and automatically set variables based on command
line arguments. It also allows command line arguments to be aliased via
configuration files and includes utility functions for parsing arbitrary
strings into argv[] arrays using shell-like rules.
.
This package contains the runtime library and locale data.
.
This is a minimal package for use in debian-installer.
Package: libusb-0.1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Aurelien Jarno <aurel32@debian.org>
Version: 2:0.1.12-2
Depends: libc6 (>= 2.3.5-1)
Provides: libusb-0.1-4
Description: userspace USB programming library
Library for programming USB applications without the knowledge
of Linux kernel internals.
.
More information can be found at the Linux USB web site
http://www.linux-usb.org/ .
.
This is a minimal package for use in debian-installer.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 20
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 204
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-aes-2.6.16-2-486-di
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 148
Maintainer: Max Vozeler <xam@debian.org>
Version: 3.1d+3+3
Depends: kernel-image-2.6.16-2-486-di, mount-aes-udeb (>= 2.12p-1)
Provides: loop-aes-modules
Description: loop-AES encryption modules for kernel 2.6.16-2-486-di
This package contains the loop-AES loadable Linux kernel modules
compiled for kernel 2.6.16-2-486-di
.
loop-AES can be used to encrypt disk partitions, removable media,
swap space and other devices. It provides measures to strengthen
the encryption: Passphrase seeds, multiple hash iterations, MD5 IV
and use of alternating encryption keys.
.
Encryption keys can be stored in a GnuPG-encrypted keyfile, which
allows the passphrase to be changed without re-encryption. Keyfiles
can also be encrypted asymmetrically for multi-user access.
.
This package includes the cipher modules blowfish, twofish and
serpent in addition to the default cipher (AES).
.
If you compiled a custom kernel, you will most likely need to
compile a custom version of these modules as well. The package
loop-aes-source has been provided for this purpose.
Package: loop-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 396
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-2
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 140
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.2-7
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD device arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
devices (software RAID), as well as multipath devices.
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb, partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-3
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: mount-aes-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 216
Maintainer: Max Vozeler <xam@debian.org>
Version: 2.12r-13
Depends: libblkid1-udeb (>= 1.37-1), libc6 (>= 2.3.6-6), libuuid1-udeb
Description: Mount utils for loop-AES
loop-AES patched mount, losetup and swapon
Package: netcfg
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 788
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Provides: configured-network
Description: Configure the network
To install additional installer components or the Debian Base System over
the network, you need to configure the network in the installer. This
component will first try to configure your network with DHCP and ask
you for static network configuration if this fails. The configured
network settings will be copied to your newly installed system.
Installer-Menu-Item: 18
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2648
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di, crc-modules-2.6.16-2-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 436
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di, firewire-core-modules-2.6.16-2-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 588
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, nic-extra-modules-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfstools-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 164
Maintainer: David MartÃnez Moreno <ender@debian.org>
Version: 1.12.1-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 60
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 656
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 54
Depends: di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base (>= 73), partman-auto (>= 51), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 836
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 92
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 564
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 692
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-base (>= 87), partman-crypto-dm, partman-crypto-loop, cdebconf-newt-entropy (>= 0.3), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-crypto-dm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-crypto, crypto-modules, cryptsetup-udeb
Description: Add to partman support for dm-crypt encryption
Package: partman-crypto-loop
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-crypto, loop-aes-modules, mount-aes-udeb, gnupg-udeb
Description: Add to partman support for loop-AES encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 10
Depends: partman-base
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 41
Depends: e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 252
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 616
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 45
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 40
Depends: ntfstools-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Depends: mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 228
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-8
Description: PCMCIA Card Services for Linux (udeb)
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.07.1
Depends: apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: scsi-modules-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.10
Depends: localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.4
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 580
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.4-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This minimal package includes the shared library
for use with the Debian installer.
Package: ntfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-2-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii reportbug 3.29.5 reports bugs in the Debian distrib
-- no debconf information
--- End Message ---