--- Begin Message ---
Package: installation-reports
Boot method: I used the net-install cd
Image version: Etch Beta 3
Date: 16.9 Saturday morning
Machine: Acer Travelmate WLMi 4202
Processor: Intel Dual-Core 1,66Ghz (yonah)
Memory: 512Mb DDR
Partitions:
Chimaera:/media/usb0/Pictures# df -h
Tiedostojärjestelmä Koko Käyt Vapaa Käy% Liitospiste
/dev/vg-crypt/root 1,0G 122M 903M 12% /
tmpfs 251M 0 251M 0% /dev/shm
/dev/sda1 111M 12M 93M 12% /boot
/dev/mapper/vg--crypt-home
5,0G 1,3G 3,8G 25% /home
/dev/mapper/vg--crypt-opt
1,0G 33M 992M 4% /opt
/dev/mapper/vg--crypt-tmp
1,0G 34M 991M 4% /tmp
/dev/mapper/vg--crypt-usr
10G 2,4G 7,7G 24% /usr
/dev/mapper/vg--crypt-var
5,0G 1,1G 4,0G 22% /var
tmpfs 10M 140K 9,9M 2% /dev
Output of lspci and lspci -n:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 110M / GeForce Go 7300 (rev a1)
05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
06:01.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)06:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
00:00.0 0600: 8086:27a0 (rev 03)
00:01.0 0604: 8086:27a1 (rev 03)
00:1b.0 0403: 8086:27d8 (rev 02)
00:1c.0 0604: 8086:27d0 (rev 02)
00:1c.1 0604: 8086:27d2 (rev 02)
00:1c.2 0604: 8086:27d4 (rev 02)
00:1c.3 0604: 8086:27d6 (rev 02)
00:1d.0 0c03: 8086:27c8 (rev 02)
00:1d.1 0c03: 8086:27c9 (rev 02)
00:1d.2 0c03: 8086:27ca (rev 02)
00:1d.3 0c03: 8086:27cb (rev 02)
00:1d.7 0c03: 8086:27cc (rev 02)
00:1e.0 0604: 8086:2448 (rev e2)
00:1f.0 0601: 8086:27b9 (rev 02)
00:1f.2 0101: 8086:27c4 (rev 02)
00:1f.3 0c05: 8086:27da (rev 02)
01:00.0 0300: 10de:01d7 (rev a1)
05:00.0 0280: 8086:4222 (rev 02)
06:01.0 0200: 14e4:170c (rev 02)
06:04.0 0607: 1524:1410 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Create file systems: [E]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems: Few bugs with mousecursor in GUI. At some point it turned the mousecursor icon to that "text-mode" instead of pointer.
I had troubles with the crypting my harddrive. It just said that error happened. I could choose the encryption and all but when I was supposed
to write them to disk it started complaing about error. This happened after it asked the passphrase. Also, I couldn't create LVM-partitions on the encrypted partition.
I tried both, dm-crypt and the loop-AES. Unfortunately I don't have the logs anymore. I checked the partman log when trying encryption and it said something like following:
"/lib/partman/choose_partitions/35crypto/do_option: cryptsetup failed"
Encryption seemed to work the first time when I wiped the partition and tested it but I couldn't make the partitioning I wanted so I exited the installer and booted to retry
but it wouldn't work anymore.
Sometimes in expertgui the items I clicked and were selected weren't visible. You could also add a "select all" option in the expert mode.
In the GUI mode you could change the focus to proper keyboard layout. When I checked my language it focused the keyboard layout to the some other than my language.
Also, there is a part of text not translated to finnish in the installer. Otherwise it worked in finnish but in the end it stated "retrieving data from local mirror".
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---