--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: installation-report: HP ProLiant DL145 G1
- From: dann frazier <dannf@hp.com>
- Date: Tue, 22 Aug 2006 15:15:28 -0600
- Message-id: <20060822211528.26035.57352.reportbug@krebs.dannf>
Package: installation-reports
Version: 2.18
Severity: normal
-- Package-specific info:
Boot method: network
Image version: http://ftp.nl.debian.org/debian/dists/testing/main/installer-amd64/beta3/images/netboot/netboot.tar.gz
Date: <Date and time of the install>
Machine: HP ProLiant DL145 G1
Partitions: <df -Tl will do; the raw partition table is preferred>
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
This install went very well, just a couple of notes/suggestions..
Issue #1: Text-only console
---------------------------
I performed this install over the DL145 G1's management processor CLI.
Usage information about this interface is in the user manual:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00083252/c00083252.pdf
Because this is a text-only interface, I modified my pxelinux.cfg/default
file to:
1) Remove the "DISPLAY" field, because boot.txt includes the splash.rle
file which isn't displayable via the CLI, and therefore gives me a
blank screen instead of a boot prompt. It probably would've been better
to just remove the splash.rle line from the boot.txt file, so that I'd
still see the "Press F1.." text.
2) Add nofb to the boot options
I'm wondering if it might make sense to make this the default settings for
the netboot flavors, since if you're netbooting, you're probably using a
remote console of some kind and therefore don't care about framebuffer.
I do not know of a way in software to detect that the install is occurring
over the CLI.
Issue #2: Network console artifacts
-----------------------------------
After I got networking up, I elected to complete the install over ssh
and experienced the UTF-8 issue in #356480. Since it may not be clear
to most users how they might switch their terminal to UTF-8, I suggest
that we add terminal-specific instructions for a few popular terminals.
Here's a patch for gnome-terminal - if you're ok with this, let me know
and I can commit it.
Index: network-console.xml
===================================================================
--- network-console.xml (revision 35446)
+++ network-console.xml (working copy)
@@ -57,7 +57,11 @@
what the installation system uses. If you do not, remote installation
will be still possible, but you may encounter strange display
artefacts like destroyed dialog borders or unreadable non-ascii
-characters. Establishing a connection with the installation system
+characters. If you are using gnome-terminal, you can switch to UTF-8 by
+selecting the "Set Character Encoding" menu item in the "Terminal"
+pull down menu.
+
+Establishing a connection with the installation system
is as simple as typing:
<informalexample><screen>
Issue #3 - Failed installation-report
-------------------------------------
After the install, I went to file an installation report from the local
machine, but this silently failed (log below), so I filed this from
another machine. I tried upgrading reportbug and installation-report to
the latest in sid (3.28 and 2.18, respectively), but this problem still
persists. Maybe because I'm behind a firewall?
dannf@dl145:~$ reportbug installation-report
Warning: no reportbug configuration found. Proceeding in novice mode.
Using 'dann frazier <dannf@dl145.dannf>' as your from address.
Detected character set: UTF-8
Please change your locale if this is incorrect.
Getting status for installation-report...
Checking for newer versions at packages.debian.org...
Will send report to Debian (per lsb_release).
Querying Debian BTS for reports on installation-report (source)...
dannf@dl145:~$
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20060806)"
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux dl145 2.6.16-2-amd64-generic #1 Sun Jul 16 01:12:23 CEST 2006 x86_64 unknown
lspci -v -t: -[0000:00]-+-01.0-[0000:03]--
lspci -v -t: +-01.1 Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
lspci -v -t: +-02.0-[0000:02]--+-03.0 Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet
lspci -v -t: | \-03.1 Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet
lspci -v -t: +-02.1 Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
lspci -v -t: +-06.0-[0000:01]--+-00.0 Advanced Micro Devices [AMD] AMD-8111 USB
lspci -v -t: | +-00.1 Advanced Micro Devices [AMD] AMD-8111 USB
lspci -v -t: | \-04.0 ATI Technologies Inc Rage XL
lspci -v -t: +-07.0 Advanced Micro Devices [AMD] AMD-8111 LPC
lspci -v -t: +-07.1 Advanced Micro Devices [AMD] AMD-8111 IDE
lspci -v -t: +-07.3 Advanced Micro Devices [AMD] AMD-8111 ACPI
lspci -v -t: +-18.0 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
lspci -v -t: +-18.1 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
lspci -v -t: +-18.2 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
lspci -v -t: \-18.3 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
lspci -n: 00:01.0 0604: 1022:7450 (rev 12)
lspci -n: 00:01.1 0800: 1022:7451 (rev 01)
lspci -n: 00:02.0 0604: 1022:7450 (rev 12)
lspci -n: 00:02.1 0800: 1022:7451 (rev 01)
lspci -n: 00:06.0 0604: 1022:7460 (rev 07)
lspci -n: 00:07.0 0601: 1022:7468 (rev 05)
lspci -n: 00:07.1 0101: 1022:7469 (rev 03)
lspci -n: 00:07.3 0680: 1022:746b (rev 05)
lspci -n: 00:18.0 0600: 1022:1100
lspci -n: 00:18.1 0600: 1022:1101
lspci -n: 00:18.2 0600: 1022:1102
lspci -n: 00:18.3 0600: 1022:1103
lspci -n: 01:00.0 0c03: 1022:7464 (rev 0b)
lspci -n: 01:00.1 0c03: 1022:7464 (rev 0b)
lspci -n: 01:04.0 0300: 1002:4752 (rev 27)
lspci -n: 02:03.0 0200: 14e4:1648 (rev 02)
lspci -n: 02:03.1 0200: 14e4:1648 (rev 02)
lspci -v: 00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12)
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 64
lspci -v: Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
lspci -v: Memory behind bridge: fea00000-feafffff
lspci -v: Prefetchable memory behind bridge: 00000000ff500000-00000000ff500000
lspci -v: Capabilities: [a0] PCI-X bridge device
lspci -v: Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration
lspci -v: Capabilities: [c0] HyperTransport: Slave or Primary Interface
lspci -v:
lspci -v: 00:01.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) (prog-if 10)
lspci -v: Subsystem: Advanced Micro Devices [AMD] Unknown device 36c0
lspci -v: Flags: bus master, medium devsel, latency 0
lspci -v: Memory at febfe000 (64-bit, non-prefetchable) [size=4K]
lspci -v:
lspci -v: 00:02.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12)
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 64
lspci -v: Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
lspci -v: Memory behind bridge: fe900000-fe9fffff
lspci -v: Prefetchable memory behind bridge: 00000000ff400000-00000000ff400000
lspci -v: Capabilities: [a0] PCI-X bridge device
lspci -v: Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration
lspci -v:
lspci -v: 00:02.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) (prog-if 10)
lspci -v: Subsystem: Advanced Micro Devices [AMD] Unknown device 36c0
lspci -v: Flags: bus master, medium devsel, latency 0
lspci -v: Memory at febff000 (64-bit, non-prefetchable) [size=4K]
lspci -v:
lspci -v: 00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07)
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 64
lspci -v: Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
lspci -v: I/O behind bridge: 0000e000-0000efff
lspci -v: Memory behind bridge: fc800000-fe8fffff
lspci -v: Prefetchable memory behind bridge: ff300000-ff3fffff
lspci -v: Capabilities: [c0] HyperTransport: Slave or Primary Interface
lspci -v: Capabilities: [f0] HyperTransport: Interrupt Discovery and Configuration
lspci -v:
lspci -v: 00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05)
lspci -v: Subsystem: Advanced Micro Devices [AMD] Unknown device 36c0
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 0
lspci -v:
lspci -v: 00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) (prog-if 8a [Master SecP PriP])
lspci -v: Subsystem: Advanced Micro Devices [AMD] Unknown device 36c0
lspci -v: Flags: bus master, medium devsel, latency 32
lspci -v: I/O ports at ffa0 [size=16]
lspci -v:
lspci -v: 00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05)
lspci -v: Subsystem: Advanced Micro Devices [AMD] Unknown device 36c0
lspci -v: Flags: medium devsel
lspci -v:
lspci -v: 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
lspci -v: Flags: fast devsel
lspci -v: Capabilities: [80] HyperTransport: Host or Secondary Interface
lspci -v: Capabilities: [a0] HyperTransport: Host or Secondary Interface
lspci -v: Capabilities: [c0] HyperTransport: Host or Secondary Interface
lspci -v:
lspci -v: 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
lspci -v: Flags: fast devsel
lspci -v:
lspci -v: 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
lspci -v: Flags: fast devsel
lspci -v:
lspci -v: 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
lspci -v: Flags: fast devsel
lspci -v:
lspci -v: 01:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) (prog-if 10)
lspci -v: Subsystem: Advanced Micro Devices [AMD] Unknown device 36c0
lspci -v: Flags: bus master, medium devsel, latency 64, IRQ 169
lspci -v: Memory at fe8fd000 (32-bit, non-prefetchable) [size=4K]
lspci -v:
lspci -v: 01:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) (prog-if 10)
lspci -v: Subsystem: Advanced Micro Devices [AMD] Unknown device 36c0
lspci -v: Flags: bus master, medium devsel, latency 64, IRQ 169
lspci -v: Memory at fe8fe000 (32-bit, non-prefetchable) [size=4K]
lspci -v:
lspci -v: 01:04.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
lspci -v: Subsystem: ATI Technologies Inc Unknown device 8008
lspci -v: Flags: bus master, stepping, medium devsel, latency 64, IRQ 11
lspci -v: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
lspci -v: I/O ports at e800 [size=256]
lspci -v: Memory at fe8ff000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Expansion ROM at fe8c0000 [disabled] [size=128K]
lspci -v: Capabilities: [5c] Power Management version 2
lspci -v:
lspci -v: 02:03.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 02)
lspci -v: Subsystem: Advanced Micro Devices [AMD] Unknown device 36c0
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177
lspci -v: Memory at fe9d0000 (64-bit, non-prefetchable) [size=64K]
lspci -v: Memory at fe9c0000 (64-bit, non-prefetchable) [size=64K]
lspci -v: Expansion ROM at fe9b0000 [disabled] [size=64K]
lspci -v: Capabilities: [40] PCI-X non-bridge device
lspci -v: Capabilities: [48] Power Management version 2
lspci -v: Capabilities: [50] Vital Product Data
lspci -v: Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
lspci -v:
lspci -v: 02:03.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 02)
lspci -v: Subsystem: Advanced Micro Devices [AMD] Unknown device 36c0
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 185
lspci -v: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
lspci -v: Memory at fe9e0000 (64-bit, non-prefetchable) [size=64K]
lspci -v: Capabilities: [40] PCI-X non-bridge device
lspci -v: Capabilities: [48] Power Management version 2
lspci -v: Capabilities: [50] Vital Product Data
lspci -v: Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
lspci -v:
lspci -x: 00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12)
lspci -x: 00: 22 10 50 74 16 01 30 02 12 00 04 06 00 40 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 03 03 40 f1 01 20 22
lspci -x: 20: a0 fe a0 fe 51 ff 51 ff 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 a0 00 00 00 00 00 00 00 ff 00 05 00
lspci -x:
lspci -x: 00:01.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
lspci -x: 00: 22 10 51 74 06 00 00 02 01 10 00 08 00 00 00 00
lspci -x: 10: 04 e0 bf fe 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 c0 36
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:02.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12)
lspci -x: 00: 22 10 50 74 16 01 30 02 12 00 04 06 00 40 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 02 02 40 f1 01 20 22
lspci -x: 20: 90 fe 90 fe 41 ff 41 ff 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 a0 00 00 00 00 00 00 00 ff 00 05 00
lspci -x:
lspci -x: 00:02.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
lspci -x: 00: 22 10 51 74 06 00 00 02 01 10 00 08 00 00 00 00
lspci -x: 10: 04 f0 bf fe 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 c0 36
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07)
lspci -x: 00: 22 10 60 74 17 01 30 02 07 00 04 06 00 40 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 01 01 40 e0 e0 00 02
lspci -x: 20: 80 fc 80 fe 30 ff 30 ff 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 00 0b 00
lspci -x:
lspci -x: 00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05)
lspci -x: 00: 22 10 68 74 0f 00 20 02 05 00 01 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 c0 36
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03)
lspci -x: 00: 22 10 69 74 05 00 00 02 03 8a 01 01 00 20 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: a1 ff 00 00 00 00 00 00 00 00 00 00 22 10 c0 36
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
lspci -x:
lspci -x: 00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05)
lspci -x: 00: 22 10 6b 74 00 00 80 02 05 00 80 06 00 40 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 c0 36
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
lspci -x: 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
lspci -x: 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
lspci -x: 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
lspci -x: 00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 01:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b)
lspci -x: 00: 22 10 64 74 17 01 80 02 0b 10 03 0c 00 40 80 00
lspci -x: 10: 00 d0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 c0 36
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 04 00 50
lspci -x:
lspci -x: 01:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b)
lspci -x: 00: 22 10 64 74 17 01 80 02 0b 10 03 0c 00 40 00 00
lspci -x: 10: 00 e0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 c0 36
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 04 00 50
lspci -x:
lspci -x: 01:04.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
lspci -x: 00: 02 10 52 47 87 00 90 02 27 00 00 03 10 40 00 00
lspci -x: 10: 00 00 00 fd 01 e8 00 00 00 f0 8f fe 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 08 80
lspci -x: 30: 00 00 8c fe 5c 00 00 00 00 00 00 00 0b 01 08 00
lspci -x:
lspci -x: 02:03.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 02)
lspci -x: 00: e4 14 48 16 46 01 b0 02 02 00 00 02 10 40 80 00
lspci -x: 10: 04 00 9d fe 00 00 00 00 04 00 9c fe 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 c0 36
lspci -x: 30: 00 00 9b fe 40 00 00 00 00 00 00 00 0a 01 40 00
lspci -x:
lspci -x: 02:03.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 02)
lspci -x: 00: e4 14 48 16 46 01 b0 02 02 00 00 02 10 40 80 00
lspci -x: 10: 04 00 9f fe 00 00 00 00 04 00 9e fe 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 c0 36
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 02 40 00
lspci -x:
lsmod: Module Size Used by
lsmod: sd_mod 18072 0
lsmod: qnx4 12360 0
lsmod: ntfs 183288 0
lsmod: xfs 476008 0
lsmod: exportfs 6016 1 xfs
lsmod: reiserfs 226544 0
lsmod: jfs 155696 0
lsmod: ext3 128400 1
lsmod: jbd 54312 1 ext3
lsmod: vfat 13568 0
lsmod: fat 52016 1 vfat
lsmod: isofs 35424 0
lsmod: ide_generic 1792 0 [permanent]
lsmod: cmd64x 11464 0 [permanent]
lsmod: pdc202xx_old 11264 0 [permanent]
lsmod: via82cxxx 9476 0 [permanent]
lsmod: alim15x3 12316 0 [permanent]
lsmod: slc90e66 5888 0 [permanent]
lsmod: hpt34x 6016 0 [permanent]
lsmod: pdc202xx_new 9472 0 [permanent]
lsmod: sis5513 14228 0 [permanent]
lsmod: atiixp 6416 0 [permanent]
lsmod: siimage 12672 0 [permanent]
lsmod: triflex 4608 0 [permanent]
lsmod: serverworks 9488 0 [permanent]
lsmod: it821x 9092 0 [permanent]
lsmod: cs5520 5504 0 [permanent]
lsmod: ns87415 5036 0 [permanent]
lsmod: cs5530 5760 0 [permanent]
lsmod: sc1200 7808 0 [permanent]
lsmod: cy82c693 5256 0 [permanent]
lsmod: trm290 4996 0 [permanent]
lsmod: piix 11140 0 [permanent]
lsmod: aec62xx 8064 0 [permanent]
lsmod: opti621 4996 0 [permanent]
lsmod: rz1000 3328 0 [permanent]
lsmod: usb_storage 80320 0
lsmod: scsi_mod 145048 2 sd_mod,usb_storage
lsmod: ide_cd 40352 0
lsmod: cdrom 36408 1 ide_cd
lsmod: ide_disk 16384 3
lsmod: generic 5764 0 [permanent]
lsmod: amd74xx 15408 0 [permanent]
lsmod: ide_core 139224 29 ide_generic,cmd64x,pdc202xx_old,via82cxxx,alim15x3,slc90e66,hpt34x,pdc202xx_new,sis5513,atiixp,siimage,triflex,serverworks,it821x,cs5520,ns87415,cs5530,sc1200,cy82c693,trm290,piix,aec62xx,opti621,rz1000,usb_storage,ide_cd,ide_disk,generic,amd74xx
lsmod: usbserial 33620 0
lsmod: usbkbd 7808 0
lsmod: thermal 15500 0
lsmod: processor 25048 1 thermal
lsmod: fan 5512 0
lsmod: tg3 97156 0
lsmod: ohci_hcd 19844 0
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 102400 38448 63952 38% /
df: tmpfs 1030908 408 1030500 0% /dev
df: tmpfs 1030908 408 1030500 0% /dev
df: tmpfs 1030908 408 1030500 0% /.dev
df: /dev/ide/host0/bus0/target0/lun0/part1 36875340 1813852 33188312 5% /target
free: total used free shared buffers
free: Mem: 2061820 1990032 71788 0 93776
free: Swap: 1614492 0 1614492
free: Total: 3676312 1990032 1686280
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 34: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 35: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : AuthenticAMD
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 5
/proc/cpuinfo: model name : AMD Opteron(tm) Processor 248
/proc/cpuinfo: stepping : 8
/proc/cpuinfo: cpu MHz : 2191.832
/proc/cpuinfo: cache size : 1024 KB
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 1
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext 3dnow
/proc/cpuinfo: bogomips : 4392.73
/proc/cpuinfo: TLB size : 1024 4K pages
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 40 bits physical, 48 bits virtual
/proc/cpuinfo: power management: ts ttp
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0070-0077 : rtc
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : ide1
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 0295-0296 : pnp 00:05
/proc/ioports: 0376-0376 : ide1
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0680-06ff : pnp 00:05
/proc/ioports: 0ca2-0ca3 : pnp 00:08
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 5000-50bf : motherboard
/proc/ioports: 5000-5003 : PM1a_EVT_BLK
/proc/ioports: 5004-5005 : PM1a_CNT_BLK
/proc/ioports: 5008-500b : PM_TMR
/proc/ioports: 5010-5015 : ACPI CPU throttle
/proc/ioports: 5020-5023 : GPE0_BLK
/proc/ioports: 50b0-50b7 : GPE1_BLK
/proc/ioports: 50c0-50df : motherboard
/proc/ioports: 50e0-50ff : motherboard
/proc/ioports: de00-de7f : motherboard
/proc/ioports: de80-deff : motherboard
/proc/ioports: e000-efff : PCI Bus #01
/proc/ioports: e800-e8ff : 0000:01:04.0
/proc/ioports: ffa0-ffaf : 0000:00:07.1
/proc/ioports: ffa0-ffa7 : ide0
/proc/ioports: ffa8-ffaf : ide1
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000c8000-000c97ff : Adapter ROM
/proc/iomem: 000c9800-000cafff : Adapter ROM
/proc/iomem: 000cb000-000cbfff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-7ffeffff : System RAM
/proc/iomem: 00100000-002b1f23 : Kernel code
/proc/iomem: 002b1f24-00376aef : Kernel data
/proc/iomem: 7fff0000-7fffefff : ACPI Tables
/proc/iomem: 7ffff000-7fffffff : ACPI Non-volatile Storage
/proc/iomem: fc800000-fe8fffff : PCI Bus #01
/proc/iomem: fd000000-fdffffff : 0000:01:04.0
/proc/iomem: fe8c0000-fe8dffff : 0000:01:04.0
/proc/iomem: fe8fd000-fe8fdfff : 0000:01:00.0
/proc/iomem: fe8fd000-fe8fdfff : ohci_hcd
/proc/iomem: fe8fe000-fe8fefff : 0000:01:00.1
/proc/iomem: fe8fe000-fe8fefff : ohci_hcd
/proc/iomem: fe8ff000-fe8fffff : 0000:01:04.0
/proc/iomem: fe900000-fe9fffff : PCI Bus #02
/proc/iomem: fe9b0000-fe9bffff : 0000:02:03.0
/proc/iomem: fe9c0000-fe9cffff : 0000:02:03.0
/proc/iomem: fe9c0000-fe9cffff : tg3
/proc/iomem: fe9d0000-fe9dffff : 0000:02:03.0
/proc/iomem: fe9d0000-fe9dffff : tg3
/proc/iomem: fe9e0000-fe9effff : 0000:02:03.1
/proc/iomem: fe9e0000-fe9effff : tg3
/proc/iomem: fe9f0000-fe9fffff : 0000:02:03.1
/proc/iomem: fe9f0000-fe9fffff : tg3
/proc/iomem: fea00000-feafffff : PCI Bus #03
/proc/iomem: febfe000-febfefff : 0000:00:01.1
/proc/iomem: febff000-febfffff : 0000:00:02.1
/proc/iomem: ff300000-ff3fffff : PCI Bus #01
/proc/iomem: ff400000-ff4fffff : PCI Bus #02
/proc/iomem: ff500000-ff5fffff : PCI Bus #03
/proc/iomem: ff7c0000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 277494 IO-APIC-edge timer
/proc/interrupts: 4: 11987 IO-APIC-edge serial
/proc/interrupts: 8: 0 IO-APIC-edge rtc
/proc/interrupts: 9: 0 IO-APIC-level acpi
/proc/interrupts: 14: 78566 IO-APIC-edge ide0
/proc/interrupts: 15: 240 IO-APIC-edge ide1
/proc/interrupts: 169: 0 IO-APIC-level ohci_hcd:usb1, ohci_hcd:usb2
/proc/interrupts: 177: 457749 IO-APIC-level eth0
/proc/interrupts: NMI: 275
/proc/interrupts: LOC: 277447
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 2061820 kB
/proc/meminfo: MemFree: 71564 kB
/proc/meminfo: Buffers: 93776 kB
/proc/meminfo: Cached: 1634404 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 1169948 kB
/proc/meminfo: Inactive: 627056 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 2061820 kB
/proc/meminfo: LowFree: 71564 kB
/proc/meminfo: SwapTotal: 1614492 kB
/proc/meminfo: SwapFree: 1614492 kB
/proc/meminfo: Dirty: 3940 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 71868 kB
/proc/meminfo: Slab: 177220 kB
/proc/meminfo: CommitLimit: 2645400 kB
/proc/meminfo: Committed_AS: 115768 kB
/proc/meminfo: PageTables: 880 kB
/proc/meminfo: VmallocTotal: 34359738367 kB
/proc/meminfo: VmallocUsed: 6876 kB
/proc/meminfo: VmallocChunk: 34359731479 kB
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 64 structures occupying 2371 bytes.
dmidecode: Table at 0x000F84B0.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: Vendor: American Megatrends Inc.
dmidecode: Version: 080008
dmidecode: Release Date: 03/07/2004
dmidecode: Address: 0xF0000
dmidecode: Runtime Size: 64 kB
dmidecode: ROM Size: 512 kB
dmidecode: Characteristics:
dmidecode: ISA is supported
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: ESCD support is available
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: BIOS ROM is socketed
dmidecode: EDD is supported
dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: AGP is supported
dmidecode: LS-120 boot is supported
dmidecode: ATAPI Zip drive boot is supported
dmidecode: BIOS boot specification is supported
dmidecode: Function key-initiated network boot is supported
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer: HP
dmidecode: Product Name: ProLiant DL145 G1
dmidecode: Version:
dmidecode: Serial Number: EA1FMNM32M
dmidecode: UUID: DAA2D800-8FFE-11D8-8000-00001A194A1F
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: HP
dmidecode: Product Name:
dmidecode: Version:
dmidecode: Serial Number:
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: HP
dmidecode: Type: Rack Mount Chassis
dmidecode: Lock: Not Present
dmidecode: Version:
dmidecode: Serial Number: EA1FMNM32M
dmidecode: Asset Tag: ................
dmidecode: Boot-up State: Safe
dmidecode: Power Supply State: Safe
dmidecode: Thermal State: Safe
dmidecode: Security Status: None
dmidecode: OEM Information: 0x00000000
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 35 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: H0
dmidecode: Type: Central Processor
dmidecode: Family: Opteron
dmidecode: Manufacturer: AMD
dmidecode: ID: 58 0F 00 00 FF FB 8B 07
dmidecode: Signature: Extended Family 0, Model 5, Stepping 8
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: CLFSH (CLFLUSH instruction supported)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: SSE2 (Streaming SIMD extensions 2)
dmidecode: Version: AMD Opteron(tm) Processor 248
dmidecode: Voltage: 3.3 V 2.9 V
dmidecode: External Clock: 200 MHz
dmidecode: Max Speed: 2200 MHz
dmidecode: Current Speed: 2200 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: Socket 940
dmidecode: L1 Cache Handle: 0x0005
dmidecode: L2 Cache Handle: 0x0006
dmidecode: L3 Cache Handle: 0x0007
dmidecode: Serial Number: Not Implemented
dmidecode: Asset Tag: Not Implemented
dmidecode: Part Number: Not Implemented
dmidecode:
dmidecode: Handle 0x0005, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L1-Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Varies With Memory Address
dmidecode: Location: Internal
dmidecode: Installed Size: 64 KB
dmidecode: Maximum Size: 64 KB
dmidecode: Supported SRAM Types:
dmidecode: Pipeline Burst
dmidecode: Installed SRAM Type: Pipeline Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Data
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0006, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L2-Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Varies With Memory Address
dmidecode: Location: Internal
dmidecode: Installed Size: 1024 KB
dmidecode: Maximum Size: 1024 KB
dmidecode: Supported SRAM Types:
dmidecode: Pipeline Burst
dmidecode: Installed SRAM Type: Pipeline Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Unified
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0007, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L3-Cache
dmidecode: Configuration: Disabled, Not Socketed, Level 3
dmidecode: Operational Mode: Unknown
dmidecode: Location: Internal
dmidecode: Installed Size: 0 KB
dmidecode: Maximum Size: 0 KB
dmidecode: Supported SRAM Types:
dmidecode: Unknown
dmidecode: Installed SRAM Type: Unknown
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x0008, DMI type 4, 35 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: H1
dmidecode: Type: Central Processor
dmidecode: Family: Other
dmidecode: Manufacturer:
dmidecode: ID: 00 00 00 00 00 00 00 00
dmidecode: Version:
dmidecode: Voltage: 3.3 V 2.9 V
dmidecode: External Clock: Unknown
dmidecode: Max Speed: 2000 MHz
dmidecode: Current Speed: Unknown
dmidecode: Status: Unpopulated
dmidecode: Upgrade: ZIF Socket
dmidecode: L1 Cache Handle: 0x0009
dmidecode: L2 Cache Handle: 0x000A
dmidecode: L3 Cache Handle: 0x000B
dmidecode: Serial Number: Not Implemented
dmidecode: Asset Tag: Not Implemented
dmidecode: Part Number: Not Implemented
dmidecode:
dmidecode: Handle 0x0009, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L1-Cache
dmidecode: Configuration: Disabled, Not Socketed, Level 1
dmidecode: Operational Mode: Unknown
dmidecode: Location: Internal
dmidecode: Installed Size: 0 KB
dmidecode: Maximum Size: 0 KB
dmidecode: Supported SRAM Types:
dmidecode: Unknown
dmidecode: Installed SRAM Type: Unknown
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x000A, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L2-Cache
dmidecode: Configuration: Disabled, Not Socketed, Level 2
dmidecode: Operational Mode: Unknown
dmidecode: Location: Internal
dmidecode: Installed Size: 0 KB
dmidecode: Maximum Size: 0 KB
dmidecode: Supported SRAM Types:
dmidecode: Unknown
dmidecode: Installed SRAM Type: Unknown
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x000B, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L3-Cache
dmidecode: Configuration: Disabled, Not Socketed, Level 3
dmidecode: Operational Mode: Unknown
dmidecode: Location: Internal
dmidecode: Installed Size: 0 KB
dmidecode: Maximum Size: 0 KB
dmidecode: Supported SRAM Types:
dmidecode: Unknown
dmidecode: Installed SRAM Type: Unknown
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x000C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J1A1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: PS2Mouse
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Mouse Port
dmidecode:
dmidecode: Handle 0x000D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J1A1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Keyboard
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x000E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J2A2
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB1
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x000F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J2A2
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB2
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0010, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J4A1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: LPT 1
dmidecode: External Connector Type: DB-25 male
dmidecode: Port Type: Parallel Port ECP/EPP
dmidecode:
dmidecode: Handle 0x0011, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J2A1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: COM A
dmidecode: External Connector Type: DB-9 male
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x0012, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J6A1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Audio Mic In
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0013, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J6A1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Audio Line In
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0014, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J6B1 - AUX IN
dmidecode: Internal Connector Type: On Board Sound Input From CD-ROM
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0015, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J6B2 - CDIN
dmidecode: Internal Connector Type: On Board Sound Input From CD-ROM
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0016, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J6J2 - PRI IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0017, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J6J1 - SEC IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0018, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J4J1 - FLOPPY
dmidecode: Internal Connector Type: On Board Floppy
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0019, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J9H1 - FRONT PNL
dmidecode: Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x001A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J1B1 - CHASSIS REAR FAN
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x001B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J2F1 - CPU FAN
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x001C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J8B4 - FRONT FAN
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x001D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J9G2 - FNT USB
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x001E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J6C3 - FP AUD
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x001F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J9G1 - CONFIG
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0020, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J8C1 - SCSI LED
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0021, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J9J2 - INTRUDER
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0022, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J9G4 - ITP
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0023, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J2H1 - MAIN POWER
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0024, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: AGP
dmidecode: Type: 32-bit AGP 4x
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 0
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Opening is shared
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0025, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: In Use
dmidecode: Length: Short
dmidecode: ID: 1
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Opening is shared
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0026, DMI type 126, 6 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0027, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Ethernet
dmidecode: Status: Enabled
dmidecode: Description: Broadcom LAN
dmidecode:
dmidecode: Handle 0x0028, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Other
dmidecode: Status: Enabled
dmidecode: Description: QLogic BMC
dmidecode:
dmidecode: Handle 0x0029, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 1
dmidecode: en|US|iso8859-1
dmidecode: Currently Installed Language: en|US|iso8859-1
dmidecode:
dmidecode: Handle 0x002A, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: Maximum Capacity: 8 GB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 4
dmidecode:
dmidecode: Handle 0x002B, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0007FFFFFFF
dmidecode: Range Size: 2 GB
dmidecode: Physical Array Handle: 0x002A
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x002C, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x002A
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 1024 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: H0_DIMM0
dmidecode: Bank Locator: BANK0
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 333 MHz (3.0 ns)
dmidecode: Manufacturer: Manufacturer1
dmidecode: Serial Number: SerNum1
dmidecode: Asset Tag: AssetTagNum1
dmidecode: Part Number: PartNum1
dmidecode:
dmidecode: Handle 0x002D, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 1 GB
dmidecode: Physical Device Handle: 0x002C
dmidecode: Memory Array Mapped Address Handle: 0x002B
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x002E, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x002A
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 72 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 1024 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: H0_DIMM1
dmidecode: Bank Locator: BANK1
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 333 MHz (3.0 ns)
dmidecode: Manufacturer: Manufacturer2
dmidecode: Serial Number: SerNum2
dmidecode: Asset Tag: AssetTagNum2
dmidecode: Part Number: PartNum2
dmidecode:
dmidecode: Handle 0x002F, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00040000000
dmidecode: Ending Address: 0x0007FFFFFFF
dmidecode: Range Size: 1 GB
dmidecode: Physical Device Handle: 0x002E
dmidecode: Memory Array Mapped Address Handle: 0x002B
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0030, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x002A
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: H0_DIMM2
dmidecode: Bank Locator: BANK2
dmidecode: Type: Unknown
dmidecode: Type Detail: Unknown
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Manufacturer3
dmidecode: Serial Number: SerNum3
dmidecode: Asset Tag: AssetTagNum3
dmidecode: Part Number: PartNum3
dmidecode:
dmidecode: Handle 0x0031, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0032, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x002A
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: H0_DIMM3
dmidecode: Bank Locator: BANK3
dmidecode: Type: Unknown
dmidecode: Type Detail: Unknown
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Manufacturer4
dmidecode: Serial Number: SerNum4
dmidecode: Asset Tag: AssetTagNum4
dmidecode: Part Number: PartNum4
dmidecode:
dmidecode: Handle 0x0033, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0034, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: Maximum Capacity: 8 GB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 4
dmidecode:
dmidecode: Handle 0x0035, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0007FFFFFFF
dmidecode: Range Size: 2 GB
dmidecode: Physical Array Handle: 0x0034
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x0036, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0034
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: H1_DIMM0
dmidecode: Bank Locator: BANK4
dmidecode: Type: Unknown
dmidecode: Type Detail: Unknown
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Manufacturer5
dmidecode: Serial Number: SerNum5
dmidecode: Asset Tag: AssetTagNum5
dmidecode: Part Number: PartNum5
dmidecode:
dmidecode: Handle 0x0037, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0038, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0034
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: H1_DIMM1
dmidecode: Bank Locator: BANK5
dmidecode: Type: Unknown
dmidecode: Type Detail: Unknown
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Manufacturer6
dmidecode: Serial Number: SerNum6
dmidecode: Asset Tag: AssetTagNum6
dmidecode: Part Number: PartNum6
dmidecode:
dmidecode: Handle 0x0039, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x003A, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0034
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: H1_DIMM2
dmidecode: Bank Locator: BANK6
dmidecode: Type: Unknown
dmidecode: Type Detail: Unknown
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Manufacturer7
dmidecode: Serial Number: SerNum7
dmidecode: Asset Tag: AssetTagNum7
dmidecode: Part Number: PartNum7
dmidecode:
dmidecode: Handle 0x003B, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x003C, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0034
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: H1_DIMM3
dmidecode: Bank Locator: BANK7
dmidecode: Type: Unknown
dmidecode: Type Detail: Unknown
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Manufacturer8
dmidecode: Serial Number: SerNum8
dmidecode: Asset Tag: AssetTagNum8
dmidecode: Part Number: PartNum8
dmidecode:
dmidecode: Handle 0x003D, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x003E, DMI type 32, 20 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x003F, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: nic-shared-modules-2.6.16-2-amd64-generic-di
Status: install ok unpacked
Version: 1.11
Provides: nic-shared-modules
Depends: kernel-image-2.6.16-2-amd64-generic-di
Description: Shared NIC drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.17
Depends: di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.22
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: firmware-modules-2.6.16-2-amd64-generic-di
Status: install ok unpacked
Version: 1.11
Provides: firmware-modules
Depends: kernel-image-2.6.16-2-amd64-generic-di
Description: Firmware request modules
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6-15
Description: GNU C Library: NSS helper for DNS - udeb
Package: download-installer
Status: install ok installed
Version: 1.11
Depends: net-retriever, anna (>= 1.07)
Description: Download installer components
Installer-Menu-Item: 23
Package: lowmemcheck
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: main-menu
Status: install ok unpacked
Version: 1.13
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.42), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.32
Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: pcmcia-modules-2.6.16-2-amd64-generic-di
Status: install ok unpacked
Version: 1.11
Provides: pcmcia-modules
Depends: kernel-image-2.6.16-2-amd64-generic-di, firmware-modules-2.6.16-2-amd64-generic-di
Description: Common PCMCIA drivers
Package: di-utils
Status: install ok installed
Version: 1.32
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.42), cdebconf-udeb (>= 0.97)
Description: Miscellaneous utilities for the debian installer
Package: nic-pcmcia-modules-2.6.16-2-amd64-generic-di
Status: install ok unpacked
Version: 1.11
Provides: nic-pcmcia-modules
Depends: kernel-image-2.6.16-2-amd64-generic-di, nic-shared-modules-2.6.16-2-amd64-generic-di, nic-extra-modules-2.6.16-2-amd64-generic-di, pcmcia-modules-2.6.16-2-amd64-generic-di
Description: Common PCMCIA NIC drivers
Package: choose-mirror
Status: install ok installed
Version: 2.04
Depends: configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23
Package: fat-modules-2.6.16-2-amd64-generic-di
Status: install ok unpacked
Version: 1.11
Provides: fat-modules
Depends: kernel-image-2.6.16-2-amd64-generic-di
Description: FAT filesystem support
Package: network-preseed
Status: install ok unpacked
Version: 1.17
Depends: configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.104+b1
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: acpi-modules-2.6.16-2-amd64-generic-di
Status: install ok unpacked
Version: 1.11
Provides: acpi-modules
Depends: kernel-image-2.6.16-2-amd64-generic-di
Description: ACPI support modules
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules
Package: firewire-core-modules-2.6.16-2-amd64-generic-di
Status: install ok unpacked
Version: 1.11
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.16-2-amd64-generic-di, kernel-image-2.6.16-2-amd64-generic-di
Description: Core FireWire drivers
Package: rootskel
Status: install ok installed
Version: 1.33
Depends: di-utils (>= 1.24)
Description: Skeleton root filesystem used by debian-installer
Package: nic-modules-2.6.16-2-amd64-generic-di
Status: install ok unpacked
Version: 1.11
Provides: nic-modules
Depends: kernel-image-2.6.16-2-amd64-generic-di, nic-shared-modules-2.6.16-2-amd64-generic-di, firmware-modules-2.6.16-2-amd64-generic-di, firewire-core-modules-2.6.16-2-amd64-generic-di
Description: Common NIC drivers
Package: udev-udeb
Status: install ok unpacked
Version: 0.093-1
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-3
Depends: libc6 (>= 2.3.5-1)
Description: Access software for a blind person using a soft braille terminal
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-3
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.5-1)
Description: text-wrapping library with i18n - runtime udeb
Package: crc-modules-2.6.16-2-amd64-generic-di
Status: install ok unpacked
Version: 1.11
Provides: crc-modules
Depends: kernel-image-2.6.16-2-amd64-generic-di
Description: CRC modules
Package: usb-discover
Status: install ok unpacked
Version: 1.05
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.4
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.3.12-2
Provides: editor
Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.1-1)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.104+b1
Provides: debconf-2.0
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.43), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: serial-modules-2.6.16-2-amd64-generic-di
Status: install ok unpacked
Version: 1.11
Provides: serial-modules
Depends: kernel-image-2.6.16-2-amd64-generic-di, pcmcia-modules-2.6.16-2-amd64-generic-di
Description: Serial drivers
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.104+b1
Depends: cdebconf-udeb, libc6 (>= 2.3.5-1)
Description: Plain text frontend for Debian Configuration Management System
Package: floppy-modules-2.6.16-2-amd64-generic-di
Status: install ok unpacked
Version: 1.11
Provides: floppy-modules
Depends: kernel-image-2.6.16-2-amd64-generic-di
Description: Floppy driver
Package: iso-3166-udeb
Status: install ok installed
Version: 0.52-1
Description: provides iso_3166.tab file
Package: fb-modules-2.6.16-2-amd64-generic-di
Status: install ok unpacked
Version: 1.11
Provides: fb-modules
Depends: kernel-image-2.6.16-2-amd64-generic-di
Description: Frame buffer support
Package: floppy-retriever
Status: install ok unpacked
Version: 1.09
Provides: retriever
Depends: mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.40
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-2
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.17
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: net-retriever
Status: install ok installed
Version: 1.11
Provides: retriever
Depends: choose-mirror, configured-network, di-utils (>= 1.16)
Description: Fetch modules from the Internet
Package: archdetect
Status: install ok installed
Version: 1.40
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.43)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.17
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: usb-serial-modules-2.6.16-2-amd64-generic-di
Status: install ok unpacked
Version: 1.11
Provides: usb-serial-modules
Depends: kernel-image-2.6.16-2-amd64-generic-di, usb-modules-2.6.16-2-amd64-generic-di
Description: USB serial drivers
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.32
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.24
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.0.0-7
Provides: libsysfs2
Depends: libc6 (>= 2.3.5-1)
Description: interface library to sysfs
Package: choose-mirror-bin
Status: install ok installed
Version: 2.04
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-2
Depends: udev-udeb, libc6 (>= 2.3.5-1), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.1-2
Depends: libc6 (>= 2.3.5-1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.0-2
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.32
Description: Terminfo entries needed by newt/slang in debian installer
Package: scsi-core-modules-2.6.16-2-amd64-generic-di
Status: install ok unpacked
Version: 1.11
Provides: scsi-core-modules
Depends: kernel-image-2.6.16-2-amd64-generic-di
Description: Core SCSI subsystem
Package: hw-detect
Status: install ok installed
Version: 1.40
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.29
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.43
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.17
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.6
Depends: di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.104
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.28
Provides: configured-network
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: usb-modules-2.6.16-2-amd64-generic-di
Status: install ok unpacked
Version: 1.11
Provides: usb-modules
Depends: kernel-image-2.6.16-2-amd64-generic-di
Description: USB support
Package: dhcp-client-udeb
Status: install ok installed
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.104+b1
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.4
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: input-modules-2.6.16-2-amd64-generic-di
Status: install ok unpacked
Version: 1.11
Provides: input-modules
Depends: kernel-image-2.6.16-2-amd64-generic-di, usb-modules-2.6.16-2-amd64-generic-di
Description: Input devices support
Package: kernel-image-2.6.16-2-amd64-generic-di
Status: install ok unpacked
Version: 1.11
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: nic-extra-modules-2.6.16-2-amd64-generic-di
Status: install ok unpacked
Version: 1.11
Provides: nic-extra-modules
Depends: kernel-image-2.6.16-2-amd64-generic-di, nic-shared-modules-2.6.16-2-amd64-generic-di, firmware-modules-2.6.16-2-amd64-generic-di, crc-modules-2.6.16-2-amd64-generic-di
Description: Rare NIC drivers
Package: debian-installer
Status: install ok installed
Version: netboot-20060806
Description: debian installation image
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: choose-mirror-bin
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: apt-mirror-setup, base-installer (>= 1.49)
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.64
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: cdebconf-newt-entropy
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.4
Depends: cdebconf-newt-udeb, libc6 (>= 2.3.5-1), libnewt0.52
Description: cdebconf newt plugin for reading from /dev/random
cdebconf plugin to facilitate reading random data from /dev/random.
Asks the user to enter random characters on the keyboard and shows a
progressbar with percent-of-data read.
Package: cdrom-core-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: kernel-image-2.6.16-2-amd64-generic-di, scsi-core-modules-2.6.16-2-amd64-generic-di, ide-modules-2.6.16-2-amd64-generic-di
Provides: cdrom-core-modules
Description: CDROM support
This package contains core CDROM support for the Linux kernel.
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: os-prober, tzsetup-udeb, mounted-partitions
Description: set up clock
Installer-Menu-Item: 62
Package: crypto-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 192
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: kernel-image-2.6.16-2-amd64-generic-di
Provides: crypto-modules
Description: crypto modules
This package contains crypto modules.
Package: cryptsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 424
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Version: 2:1.0.3-3
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2), libpopt0-udeb (>= 1.10), libuuid1-udeb, dmsetup-udeb
Description: configures encrypted block devices
Since kernel 2.6.4, encrypted filesystem support is provided by the device
mapper target dm-crypt. This utility provides a command-line interface for
configuring this facility. It has integrated support for LUKS.
.
cryptsetup is backwards compatible with the on-disk format of cryptoloop,
but also supports more secure formats. This package also includes support
for automatically configuring encrypted devices at boot time via the config
file /etc/crypttab. When combined with newer versions of the debian
initrd-tools and standard debian kernels, cryptoroot is also supported.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 228
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp3-client-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 528
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 3.0.4-6
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.32
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.42)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 76
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: dmsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.07-1
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Kernel Device Mapper userspace library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
.
This package contains a utility for modifying device mappings.
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 420
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: ext3-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 316
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: kernel-image-2.6.16-2-amd64-generic-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 176
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-10
Depends: libc6 (>= 2.3.5-1)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.4
Depends: archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: gnupg-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 776
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.5-1
Depends: libc6 (>= 2.3.5-1), libusb-0.1-udeb (>= 2:0.1.12), zlib1g-udeb (>= 1:1.2.1)
Description: GNU privacy guard - a free PGP replacement
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG packaged in minimal form for use in debian-installer.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: ide-core-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 196
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: kernel-image-2.6.16-2-amd64-generic-di
Provides: ide-core-modules
Description: IDE support
This package contains core IDE support for the Linux kernel.
Package: ide-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 504
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: kernel-image-2.6.16-2-amd64-generic-di, ide-core-modules-2.6.16-2-amd64-generic-di
Provides: ide-modules
Description: IDE drivers
This package contains IDE drivers for the Linux kernel.
Package: jfs-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: kernel-image-2.6.16-2-amd64-generic-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1004
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 2124
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6-15
Provides: libc6, libc-udeb, glibc-2.3.6-2, glibc-2.3.5-3
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 84
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.07-1
Depends: libc6 (>= 2.3.5-1)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 352
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libpopt0-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Paul Martin <pm@debian.org>
Version: 1.10-2
Depends: libc6 (>= 2.3.5-1)
Description: lib for parsing cmdline parameters
Popt was heavily influenced by the getopt() and getopt_long() functions,
but it allows more powerful argument expansion. It can parse arbitrary
argv[] style arrays and automatically set variables based on command
line arguments. It also allows command line arguments to be aliased via
configuration files and includes utility functions for parsing arbitrary
strings into argv[] arrays using shell-like rules.
.
This package contains the runtime library and locale data.
.
This is a minimal package for use in debian-installer.
Package: libusb-0.1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 44
Maintainer: Aurelien Jarno <aurel32@debian.org>
Version: 2:0.1.12-2
Depends: libc6 (>= 2.3.5-1)
Provides: libusb-0.1-4
Description: userspace USB programming library
Library for programming USB applications without the knowledge
of Linux kernel internals.
.
More information can be found at the Linux USB web site
http://www.linux-usb.org/ .
.
This is a minimal package for use in debian-installer.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 204
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-aes-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Max Vozeler <xam@debian.org>
Version: 3.1d+3+3
Depends: kernel-image-2.6.16-2-amd64-generic-di, mount-aes-udeb (>= 2.12p-1)
Provides: loop-aes-modules
Description: loop-AES encryption modules for kernel 2.6.16-2-amd64-generic-di
This package contains the loop-AES loadable Linux kernel modules
compiled for kernel 2.6.16-2-amd64-generic-di
.
loop-AES can be used to encrypt disk partitions, removable media,
swap space and other devices. It provides measures to strengthen
the encryption: Passphrase seeds, multiple hash iterations, MD5 IV
and use of alternating encryption keys.
.
Encryption keys can be stored in a GnuPG-encrypted keyfile, which
allows the passphrase to be changed without re-encryption. Keyfiles
can also be encrypted asymmetrically for multi-user access.
.
This package includes the cipher modules blowfish, twofish and
serpent in addition to the default cipher (AES).
.
If you compiled a custom kernel, you will most likely need to
compile a custom version of these modules as well. The package
loop-aes-source has been provided for this purpose.
Package: loop-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 56
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: kernel-image-2.6.16-2-amd64-generic-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 472
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-2
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 408
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: kernel-image-2.6.16-2-amd64-generic-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 152
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.2-7
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux MD device arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
devices (software RAID), as well as multipath devices.
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb, partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-3
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: mount-aes-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 252
Maintainer: Max Vozeler <xam@debian.org>
Version: 2.12r-13
Depends: libblkid1-udeb (>= 1.37-1), libc6 (>= 2.3.5-1), libuuid1-udeb
Description: Mount utils for loop-AES
loop-AES patched mount, losetup and swapon
Package: nic-usb-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: kernel-image-2.6.16-2-amd64-generic-di, nic-shared-modules-2.6.16-2-amd64-generic-di, usb-modules-2.6.16-2-amd64-generic-di, firmware-modules-2.6.16-2-amd64-generic-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfstools-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 152
Maintainer: David MartÃnez Moreno <ender@debian.org>
Version: 1.12.1-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: parport-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: kernel-image-2.6.16-2-amd64-generic-di
Provides: parport-modules
Description: Parallel port support
This package contains parallel port drivers for the Linux kernel.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.42), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 76
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 54
Depends: di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base (>= 73), partman-auto (>= 51), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 856
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 92
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1), partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 564
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 696
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-base (>= 87), partman-crypto-dm, partman-crypto-loop, cdebconf-newt-entropy (>= 0.3), libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-crypto-dm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-crypto, crypto-modules, cryptsetup-udeb
Description: Add to partman support for dm-crypt encryption
Package: partman-crypto-loop
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-crypto, loop-aes-modules, mount-aes-udeb, gnupg-udeb
Description: Add to partman support for loop-AES encryption
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 41
Depends: e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 252
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 616
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 45
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 40
Depends: ntfstools-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Depends: mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-storage-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 56
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: kernel-image-2.6.16-2-amd64-generic-di, ide-core-modules-2.6.16-2-amd64-generic-di, cdrom-core-modules-2.6.16-2-amd64-generic-di, pcmcia-modules-2.6.16-2-amd64-generic-di
Provides: pcmcia-storage-modules
Description: PCMCIA storage drivers
This package contains PCMCIA storage drivers for the Linux kernel.
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.07.1
Depends: apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: kernel-image-2.6.16-2-amd64-generic-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: sata-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 432
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: kernel-image-2.6.16-2-amd64-generic-di, scsi-core-modules-2.6.16-2-amd64-generic-di
Provides: sata-modules
Description: SATA drivers
This package contains SATA drivers for the Linux kernel.
Package: scsi-common-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 836
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: kernel-image-2.6.16-2-amd64-generic-di, scsi-core-modules-2.6.16-2-amd64-generic-di, cdrom-core-modules-2.6.16-2-amd64-generic-di
Provides: scsi-common-modules
Description: Very common SCSI drivers
This package contains very common SCSI drivers for the Linux kernel.
Package: scsi-extra-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1632
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: scsi-modules-2.6.16-2-amd64-generic-di, scsi-core-modules-2.6.16-2-amd64-generic-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: scsi-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 796
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: kernel-image-2.6.16-2-amd64-generic-di, scsi-core-modules-2.6.16-2-amd64-generic-di, scsi-common-modules-2.6.16-2-amd64-generic-di, parport-modules-2.6.16-2-amd64-generic-di, cdrom-core-modules-2.6.16-2-amd64-generic-di, firmware-modules-2.6.16-2-amd64-generic-di
Provides: scsi-modules
Description: SCSI drivers
This package contains SCSI drivers for the Linux kernel.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.10
Depends: localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: usb-storage-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: ide-core-modules-2.6.16-2-amd64-generic-di, scsi-core-modules-2.6.16-2-amd64-generic-di, usb-modules-2.6.16-2-amd64-generic-di
Provides: usb-storage-modules
Description: USB storage support
This package contains the USB storage driver for the Linux kernel.
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.4
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: xfs-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 688
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: kernel-image-2.6.16-2-amd64-generic-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 272
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.10-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 108
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This minimal package includes the shared library
for use with the Debian installer.
Package: libcrypto0.9.8-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1484
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Version: 0.9.8b-2
Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1)
Provides: libssl0.9.8
Description: crypto shared library - udeb
libcrypto shared library.
.
Do not install it on a normal system.
Package: libnss-files-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 60
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6-15
Description: GNU C Library: NSS helper for files - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains the files NSS helper needed for the Debian installer.
Do not install it on a normal system.
Package: network-console
Status: install ok unpacked
Priority: optional
Section: debian-installer
Installed-Size: 184
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.6
Depends: configured-network, openssh-server-udeb (>= 1:3.8p1-1)
Description: Continue installation remotely using SSH
Installer-Menu-Item: 21
Package: openssh-server-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 408
Maintainer: Matthew Vernon <matthew@debian.org>
Version: 1:4.3p2-3
Depends: libc6 (>= 2.3.5-1), libcrypto0.9.8-udeb (>= 0.9.8b-1), zlib1g-udeb (>= 1:1.2.1), libnss-files-udeb
Description: Secure shell server for the Debian installer
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
This package provides the sshd server for use in debian-installer.
Since it is expected to be used in specialized situations (e.g. S/390
installs with no console), it does not provide any configuration.
Package: ntfs-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: kernel-image-2.6.16-2-amd64-generic-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.16-2-amd64-generic-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: kernel-image-2.6.16-2-amd64-generic-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- no debconf information
--- End Message ---