--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: installation-report: Intel D915POM: kernel immediately hangs
- From: Roderik Muit <roderik@muit.nl>
- Date: Fri, 18 Aug 2006 05:24:45 +0200
- Message-id: <20060818032445.3461.69751.reportbug@mediabeest.gf168>
Package: installation-reports
Version: 2.17
Severity: normal
-- Package-specific info:
Boot method: CD
Image version: d-i b3
Date: 12-18 Aug 2006
Machine: Intel D915POM motherboard
Partitions:
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [E]
Detect network card: [ ]
Configure network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
Trying to install Debian on my 'Home Theatre PC' with Intel D915POM motherboard,
the kernel immediately hung after booting the CD. All kernels (also 2.4, also several versions of d-i b2) gave this problem.
I could only boot the kernel with boot parameters 'pci=off acpi=off' (other common acpi parameters did not work) -- however then USB was not working, and this motherboard does not have any ps/2 keyboard connector! So I could not continue installation that way either.
The kernel panic-ed at pci_pcibios_init(). (I can send you the exact address, register values, etc... which I have to read & key in manually after the kernel hangs... if it helps.)
After trying several things, I finally succeeded in compiling my own kernel which would boot AND recognise my USB keyboard AND recognise my ATA disk (as /dev/sda).
I don't exactly know what the difference between the d-i kernel and my one is, that makes it not panic; I don't have the .config from the d-i kernel. I can send you my .config if you want. My first guess is it's enabling 'PCI express' in the kernel that does it - but it's an uneducated guess.
(... so I replaced the kernel on the d-i ISO image (I could not figure out another way of booting the kernel & starting the installer), which would then boot, give me an error "this is not a proper d-i CD", after which I could install the stock d-i b3 CD again and continue.
I'm typing this installation report on my just-installed debian system with my own kernel with all functionality compiled in (and mismatching modules.dep & modules, but the system boots OK.))
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20060806)"
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux mediabeest 2.6.16 #3 SMP Thu Aug 17 23:53:38 CEST 2006 i686 unknown
lspci -v -t: -[0000:00]-+-00.0 Intel Corporation 915G/P/GV/GL/PL/910GL Express Memory Controller Hub
lspci -v -t: +-01.0-[0000:01]--+-00.0 ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]
lspci -v -t: | \-00.1 ATI Technologies Inc RV370 [Radeon X300SE]
lspci -v -t: +-1b.0 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller
lspci -v -t: +-1c.0-[0000:02]--
lspci -v -t: +-1c.1-[0000:03]--
lspci -v -t: +-1c.2-[0000:04]--
lspci -v -t: +-1c.3-[0000:05]--
lspci -v -t: +-1d.0 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1
lspci -v -t: +-1d.1 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2
lspci -v -t: +-1d.2 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3
lspci -v -t: +-1d.3 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4
lspci -v -t: +-1d.7 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
lspci -v -t: +-1e.0-[0000:06]--+-00.0 Philips Semiconductors SAA7134 Video Broadcast Decoder
lspci -v -t: | +-02.0 Intel Corporation PRO/Wireless 2200BG Network Connection
lspci -v -t: | +-04.0 Philips Semiconductors SAA7134 Video Broadcast Decoder
lspci -v -t: | +-05.0 Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
lspci -v -t: | \-08.0 Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller
lspci -v -t: +-1f.0 Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge
lspci -v -t: +-1f.1 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller
lspci -v -t: +-1f.2 Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller
lspci -v -t: \-1f.3 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller
lspci -n: 00:00.0 0600: 8086:2580
lspci -n: 00:01.0 0604: 8086:2581
lspci -n: 00:1b.0 0403: 8086:2668 (rev 03)
lspci -n: 00:1c.0 0604: 8086:2660 (rev 03)
lspci -n: 00:1c.1 0604: 8086:2662 (rev 03)
lspci -n: 00:1c.2 0604: 8086:2664 (rev 03)
lspci -n: 00:1c.3 0604: 8086:2666 (rev 03)
lspci -n: 00:1d.0 0c03: 8086:2658 (rev 03)
lspci -n: 00:1d.1 0c03: 8086:2659 (rev 03)
lspci -n: 00:1d.2 0c03: 8086:265a (rev 03)
lspci -n: 00:1d.3 0c03: 8086:265b (rev 03)
lspci -n: 00:1d.7 0c03: 8086:265c (rev 03)
lspci -n: 00:1e.0 0604: 8086:244e (rev d3)
lspci -n: 00:1f.0 0601: 8086:2640 (rev 03)
lspci -n: 00:1f.1 0101: 8086:266f (rev 03)
lspci -n: 00:1f.2 0101: 8086:2651 (rev 03)
lspci -n: 00:1f.3 0c05: 8086:266a (rev 03)
lspci -n: 01:00.0 0300: 1002:5b60
lspci -n: 01:00.1 0380: 1002:5b70
lspci -n: 06:00.0 0480: 1131:7134 (rev 01)
lspci -n: 06:02.0 0280: 8086:4220 (rev 05)
lspci -n: 06:04.0 0480: 1131:7134 (rev 01)
lspci -n: 06:05.0 0c00: 104c:8024
lspci -n: 06:08.0 0200: 8086:1064 (rev 01)
lspci -v: 00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Express Memory Controller Hub
lspci -v: Subsystem: Intel Corporation Unknown device a100
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Capabilities: [e0] Vendor Specific Information
lspci -v:
lspci -v: 00:01.0 PCI bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Express PCI Express Root Port
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
lspci -v: I/O behind bridge: 00002000-00002fff
lspci -v: Memory behind bridge: 48100000-481fffff
lspci -v: Prefetchable memory behind bridge: 40000000-47ffffff
lspci -v: Capabilities: [88] #0d [0000]
lspci -v: Capabilities: [80] Power Management version 2
lspci -v: Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
lspci -v: Capabilities: [a0] Express Root Port (Slot+) IRQ 0
lspci -v:
lspci -v: 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
lspci -v: Subsystem: Intel Corporation Unknown device a100
lspci -v: Flags: bus master, fast devsel, latency 0, IRQ 11
lspci -v: Memory at 48200000 (64-bit, non-prefetchable) [size=16K]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v: Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
lspci -v: Capabilities: [70] Express Unknown type IRQ 0
lspci -v:
lspci -v: 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
lspci -v: Memory behind bridge: 48300000-483fffff
lspci -v: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
lspci -v: Capabilities: [90] #0d [0000]
lspci -v: Capabilities: [a0] Power Management version 2
lspci -v:
lspci -v: 00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
lspci -v: Memory behind bridge: 48400000-484fffff
lspci -v: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
lspci -v: Capabilities: [90] #0d [0000]
lspci -v: Capabilities: [a0] Power Management version 2
lspci -v:
lspci -v: 00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
lspci -v: Memory behind bridge: 48500000-485fffff
lspci -v: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
lspci -v: Capabilities: [90] #0d [0000]
lspci -v: Capabilities: [a0] Power Management version 2
lspci -v:
lspci -v: 00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
lspci -v: Memory behind bridge: 48600000-486fffff
lspci -v: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
lspci -v: Capabilities: [90] #0d [0000]
lspci -v: Capabilities: [a0] Power Management version 2
lspci -v:
lspci -v: 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
lspci -v: Subsystem: Intel Corporation Unknown device a100
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 21
lspci -v: I/O ports at 3080 [size=32]
lspci -v:
lspci -v: 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
lspci -v: Subsystem: Intel Corporation Unknown device a100
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 19
lspci -v: I/O ports at 3060 [size=32]
lspci -v:
lspci -v: 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
lspci -v: Subsystem: Intel Corporation Unknown device a100
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 18
lspci -v: I/O ports at 3040 [size=32]
lspci -v:
lspci -v: 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
lspci -v: Subsystem: Intel Corporation Unknown device a100
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 16
lspci -v: I/O ports at 3020 [size=32]
lspci -v:
lspci -v: 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20)
lspci -v: Subsystem: Intel Corporation Unknown device a100
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 21
lspci -v: Memory at 48204000 (32-bit, non-prefetchable) [size=1K]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v: Capabilities: [58] Debug port
lspci -v:
lspci -v: 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3) (prog-if 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
lspci -v: I/O behind bridge: 00001000-00001fff
lspci -v: Memory behind bridge: 48000000-480fffff
lspci -v: Capabilities: [50] #0d [0000]
lspci -v:
lspci -v: 00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
lspci -v: Subsystem: Intel Corporation Unknown device a100
lspci -v: Flags: bus master, medium devsel, latency 0
lspci -v:
lspci -v: 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
lspci -v: Subsystem: Intel Corporation Unknown device a100
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 18
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at 30b0 [size=16]
lspci -v:
lspci -v: 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
lspci -v: Subsystem: Intel Corporation Unknown device a100
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
lspci -v: I/O ports at 30c8 [size=8]
lspci -v: I/O ports at 30e4 [size=4]
lspci -v: I/O ports at 30c0 [size=8]
lspci -v: I/O ports at 30e0 [size=4]
lspci -v: I/O ports at 30a0 [size=16]
lspci -v: Capabilities: [70] Power Management version 2
lspci -v:
lspci -v: 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
lspci -v: Subsystem: Intel Corporation Unknown device a100
lspci -v: Flags: medium devsel, IRQ 10
lspci -v: I/O ports at 3000 [size=32]
lspci -v:
lspci -v: 01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]
lspci -v: Subsystem: Giga-byte Technology Unknown device 2102
lspci -v: Flags: bus master, fast devsel, latency 0, IRQ 11
lspci -v: Memory at 40000000 (32-bit, prefetchable) [size=128M]
lspci -v: I/O ports at 2000 [size=256]
lspci -v: Memory at 48110000 (32-bit, non-prefetchable) [size=64K]
lspci -v: Expansion ROM at 48120000 [disabled] [size=128K]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v: Capabilities: [58] Express Endpoint IRQ 0
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
lspci -v:
lspci -v: 01:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE]
lspci -v: Subsystem: Giga-byte Technology Unknown device 2103
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Memory at 48100000 (32-bit, non-prefetchable) [size=64K]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v: Capabilities: [58] Express Endpoint IRQ 0
lspci -v:
lspci -v: 06:00.0 Multimedia controller: Philips Semiconductors SAA7134 Video Broadcast Decoder (rev 01)
lspci -v: Subsystem: Avermedia Technologies Inc Unknown device 6360
lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 11
lspci -v: Memory at 48006c00 (32-bit, non-prefetchable) [size=1K]
lspci -v: Capabilities: [40] Power Management version 1
lspci -v:
lspci -v: 06:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
lspci -v: Subsystem: Intel Corporation Unknown device 2702
lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 11
lspci -v: Memory at 48005000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Capabilities: [dc] Power Management version 2
lspci -v:
lspci -v: 06:04.0 Multimedia controller: Philips Semiconductors SAA7134 Video Broadcast Decoder (rev 01)
lspci -v: Subsystem: Avermedia Technologies Inc Unknown device 7360
lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 11
lspci -v: Memory at 48006800 (32-bit, non-prefetchable) [size=1K]
lspci -v: Capabilities: [40] Power Management version 1
lspci -v:
lspci -v: 06:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10)
lspci -v: Subsystem: Intel Corporation Unknown device a100
lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 11
lspci -v: Memory at 48006000 (32-bit, non-prefetchable) [size=2K]
lspci -v: Memory at 48000000 (32-bit, non-prefetchable) [size=16K]
lspci -v: Capabilities: [44] Power Management version 2
lspci -v:
lspci -v: 06:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller (rev 01)
lspci -v: Subsystem: Intel Corporation Unknown device 3076
lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 20
lspci -v: Memory at 48004000 (32-bit, non-prefetchable) [size=4K]
lspci -v: I/O ports at 1000 [size=64]
lspci -v: Capabilities: [dc] Power Management version 2
lspci -v:
lspci -x: 00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Express Memory Controller Hub
lspci -x: 00: 86 80 80 25 06 00 90 20 00 00 00 06 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 00 a1
lspci -x: 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:01.0 PCI bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Express PCI Express Root Port
lspci -x: 00: 86 80 81 25 07 00 10 00 00 00 04 06 00 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 01 01 00 20 20 00 00
lspci -x: 20: 10 48 10 48 00 40 f0 47 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 88 00 00 00 00 00 00 00 ff 01 08 00
lspci -x:
lspci -x: 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
lspci -x: 00: 86 80 68 26 06 00 10 00 03 00 03 04 00 00 00 00
lspci -x: 10: 04 00 20 48 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 00 a1
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00
lspci -x:
lspci -x: 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
lspci -x: 00: 86 80 60 26 07 00 10 00 03 00 04 06 00 00 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 02 02 00 f0 00 00 20
lspci -x: 20: 30 48 30 48 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00
lspci -x:
lspci -x: 00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
lspci -x: 00: 86 80 62 26 07 00 10 00 03 00 04 06 00 00 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 03 03 00 f0 00 00 20
lspci -x: 20: 40 48 40 48 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 02 00 00
lspci -x:
lspci -x: 00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03)
lspci -x: 00: 86 80 64 26 07 00 10 00 03 00 04 06 00 00 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 04 04 00 f0 00 00 20
lspci -x: 20: 50 48 50 48 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 03 00 00
lspci -x:
lspci -x: 00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03)
lspci -x: 00: 86 80 66 26 07 00 10 00 03 00 04 06 00 00 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 05 05 00 f0 00 00 20
lspci -x: 20: 60 48 60 48 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 04 00 00
lspci -x:
lspci -x: 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
lspci -x: 00: 86 80 58 26 05 00 80 02 03 00 03 0c 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 81 30 00 00 00 00 00 00 00 00 00 00 86 80 00 a1
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00
lspci -x:
lspci -x: 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
lspci -x: 00: 86 80 59 26 05 00 80 02 03 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 61 30 00 00 00 00 00 00 00 00 00 00 86 80 00 a1
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
lspci -x:
lspci -x: 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
lspci -x: 00: 86 80 5a 26 05 00 80 02 03 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 41 30 00 00 00 00 00 00 00 00 00 00 86 80 00 a1
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 00
lspci -x:
lspci -x: 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
lspci -x: 00: 86 80 5b 26 05 00 80 02 03 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 21 30 00 00 00 00 00 00 00 00 00 00 86 80 00 a1
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00
lspci -x:
lspci -x: 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
lspci -x: 00: 86 80 5c 26 06 00 90 02 03 20 03 0c 00 00 00 00
lspci -x: 10: 00 40 20 48 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 00 a1
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 09 01 00 00
lspci -x:
lspci -x: 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
lspci -x: 00: 86 80 4e 24 07 00 10 00 d3 01 04 06 00 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 06 06 20 10 10 80 22
lspci -x: 20: 00 48 00 48 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 00 00
lspci -x:
lspci -x: 00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
lspci -x: 00: 86 80 40 26 07 00 00 02 03 00 01 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 00 a1
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
lspci -x: 00: 86 80 6f 26 05 00 88 02 03 8a 01 01 00 00 00 00
lspci -x: 10: d9 30 00 00 ed 30 00 00 d1 30 00 00 e9 30 00 00
lspci -x: 20: b1 30 00 00 00 00 00 00 00 00 00 00 86 80 00 a1
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
lspci -x:
lspci -x: 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
lspci -x: 00: 86 80 51 26 05 00 b0 02 03 8f 01 01 00 00 00 00
lspci -x: 10: c9 30 00 00 e5 30 00 00 c1 30 00 00 e1 30 00 00
lspci -x: 20: a1 30 00 00 00 00 00 00 00 00 00 00 86 80 00 a1
lspci -x: 30: 00 00 00 00 70 00 00 00 00 00 00 00 0a 02 00 00
lspci -x:
lspci -x: 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
lspci -x: 00: 86 80 6a 26 01 00 80 02 03 00 05 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 01 30 00 00 00 00 00 00 00 00 00 00 86 80 00 a1
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
lspci -x:
lspci -x: 01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]
lspci -x: 00: 02 10 60 5b 07 00 10 00 00 00 00 03 00 00 80 00
lspci -x: 10: 08 00 00 40 01 20 00 00 00 00 11 48 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 02 21
lspci -x: 30: 00 00 00 50 50 00 00 00 00 00 00 00 0b 01 00 00
lspci -x:
lspci -x: 01:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE]
lspci -x: 00: 02 10 70 5b 07 00 10 00 00 00 80 03 00 00 00 00
lspci -x: 10: 00 00 10 48 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 03 21
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 06:00.0 Multimedia controller: Philips Semiconductors SAA7134 Video Broadcast Decoder (rev 01)
lspci -x: 00: 31 11 34 71 06 00 90 02 01 00 80 04 00 20 00 00
lspci -x: 10: 00 6c 00 48 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 61 14 60 63
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 ff ff
lspci -x:
lspci -x: 06:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
lspci -x: 00: 86 80 20 42 16 00 90 02 05 00 80 02 00 20 00 00
lspci -x: 10: 00 50 00 48 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 02 27
lspci -x: 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 03 18
lspci -x:
lspci -x: 06:04.0 Multimedia controller: Philips Semiconductors SAA7134 Video Broadcast Decoder (rev 01)
lspci -x: 00: 31 11 34 71 06 00 90 02 01 00 80 04 00 20 00 00
lspci -x: 10: 00 68 00 48 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 61 14 60 73
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 ff ff
lspci -x:
lspci -x: 06:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
lspci -x: 00: 4c 10 24 80 16 00 10 02 00 10 00 0c 00 20 00 00
lspci -x: 10: 00 60 00 48 00 00 00 48 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 00 a1
lspci -x: 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 04
lspci -x:
lspci -x: 06:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller (rev 01)
lspci -x: 00: 86 80 64 10 17 00 90 02 01 00 00 02 00 20 00 00
lspci -x: 10: 00 40 00 48 01 10 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 76 30
lspci -x: 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 08 38
lspci -x:
lsmod: Module Size Used by
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 509724 460 509264 0% /dev
df: tmpfs 509724 460 509264 0% /dev
df: tmpfs 509724 460 509264 0% /.dev
df: /dev/scsi/host0/bus0/target0/lun0/part6 24604280 2180332 22173980 9% /target
df: /dev/scsi/host0/bus0/target0/lun0/part7 89374148 131276 89242872 0% /target/home
free: total used free shared buffers
free: Mem: 1019452 991304 28148 0 62076
free: Swap: 3028212 456 3027756
free: Total: 4047664 991760 3055904
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 34: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 35: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 4
/proc/cpuinfo: model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
/proc/cpuinfo: stepping : 3
/proc/cpuinfo: cpu MHz : 2993.807
/proc/cpuinfo: cache size : 2048 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 2
/proc/cpuinfo: core id : 0
/proc/cpuinfo: cpu cores : 1
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 5
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl est cid cx16 xtpr
/proc/cpuinfo: bogomips : 5993.71
/proc/cpuinfo:
/proc/cpuinfo: processor : 1
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 4
/proc/cpuinfo: model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
/proc/cpuinfo: stepping : 3
/proc/cpuinfo: cpu MHz : 2993.807
/proc/cpuinfo: cache size : 2048 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 2
/proc/cpuinfo: core id : 0
/proc/cpuinfo: cpu cores : 1
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 5
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl est cid cx16 xtpr
/proc/cpuinfo: bogomips : 5984.26
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 0400-0403 : PM1a_EVT_BLK
/proc/ioports: 0404-0405 : PM1a_CNT_BLK
/proc/ioports: 0408-040b : PM_TMR
/proc/ioports: 0420-0420 : PM2_CNT_BLK
/proc/ioports: 0428-042f : GPE0_BLK
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 1000-1fff : PCI Bus #06
/proc/ioports: 1000-103f : 0000:06:08.0
/proc/ioports: 1000-103f : e100
/proc/ioports: 2000-2fff : PCI Bus #01
/proc/ioports: 2000-20ff : 0000:01:00.0
/proc/ioports: 3000-301f : 0000:00:1f.3
/proc/ioports: 3020-303f : 0000:00:1d.3
/proc/ioports: 3020-303f : uhci_hcd
/proc/ioports: 3040-305f : 0000:00:1d.2
/proc/ioports: 3040-305f : uhci_hcd
/proc/ioports: 3060-307f : 0000:00:1d.1
/proc/ioports: 3060-307f : uhci_hcd
/proc/ioports: 3080-309f : 0000:00:1d.0
/proc/ioports: 3080-309f : uhci_hcd
/proc/ioports: 30a0-30af : 0000:00:1f.2
/proc/ioports: 30a0-30af : libata
/proc/ioports: 30b0-30bf : 0000:00:1f.1
/proc/ioports: 30b0-30b7 : ide0
/proc/ioports: 30c0-30c7 : 0000:00:1f.2
/proc/ioports: 30c0-30c7 : libata
/proc/ioports: 30c8-30cf : 0000:00:1f.2
/proc/ioports: 30c8-30cf : libata
/proc/ioports: 30e0-30e3 : 0000:00:1f.2
/proc/ioports: 30e0-30e3 : libata
/proc/ioports: 30e4-30e7 : 0000:00:1f.2
/proc/ioports: 30e4-30e7 : libata
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000ccfff : Video ROM
/proc/iomem: 000cd000-000ce7ff : Adapter ROM
/proc/iomem: 000ce800-000cf7ff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-3ef7afff : System RAM
/proc/iomem: 00100000-002e7846 : Kernel code
/proc/iomem: 002e7847-0038725f : Kernel data
/proc/iomem: 3ef7b000-3f008fff : ACPI Non-volatile Storage
/proc/iomem: 3f009000-3fe94fff : ACPI Tables
/proc/iomem: 3fe95000-3fe9efff : ACPI Non-volatile Storage
/proc/iomem: 3fe9f000-3feccfff : ACPI Tables
/proc/iomem: 3fecd000-3fee8fff : ACPI Non-volatile Storage
/proc/iomem: 3fee9000-3fefffff : ACPI Tables
/proc/iomem: 40000000-47ffffff : PCI Bus #01
/proc/iomem: 40000000-47ffffff : 0000:01:00.0
/proc/iomem: 48000000-480fffff : PCI Bus #06
/proc/iomem: 48000000-48003fff : 0000:06:05.0
/proc/iomem: 48004000-48004fff : 0000:06:08.0
/proc/iomem: 48004000-48004fff : e100
/proc/iomem: 48005000-48005fff : 0000:06:02.0
/proc/iomem: 48006000-480067ff : 0000:06:05.0
/proc/iomem: 48006800-48006bff : 0000:06:04.0
/proc/iomem: 48006c00-48006fff : 0000:06:00.0
/proc/iomem: 48100000-481fffff : PCI Bus #01
/proc/iomem: 48100000-4810ffff : 0000:01:00.1
/proc/iomem: 48110000-4811ffff : 0000:01:00.0
/proc/iomem: 48120000-4813ffff : 0000:01:00.0
/proc/iomem: 48200000-48203fff : 0000:00:1b.0
/proc/iomem: 48204000-482043ff : 0000:00:1d.7
/proc/iomem: 48204000-482043ff : ehci_hcd
/proc/iomem: 48300000-483fffff : PCI Bus #02
/proc/iomem: 48400000-484fffff : PCI Bus #03
/proc/iomem: 48500000-485fffff : PCI Bus #04
/proc/iomem: 48600000-486fffff : PCI Bus #05
/proc/interrupts: CPU0 CPU1
/proc/interrupts: 0: 3201389 0 IO-APIC-edge timer
/proc/interrupts: 9: 0 0 IO-APIC-level acpi
/proc/interrupts: 14: 1748 0 IO-APIC-edge ide0
/proc/interrupts: 16: 74 0 IO-APIC-level uhci_hcd:usb5
/proc/interrupts: 18: 0 0 IO-APIC-level uhci_hcd:usb4
/proc/interrupts: 19: 111417 0 IO-APIC-level libata, uhci_hcd:usb3
/proc/interrupts: 20: 477475 0 IO-APIC-level eth0
/proc/interrupts: 21: 4301 0 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb2
/proc/interrupts: NMI: 0 0
/proc/interrupts: LOC: 3152883 3152882
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 1019452 kB
/proc/meminfo: MemFree: 28124 kB
/proc/meminfo: Buffers: 62076 kB
/proc/meminfo: Cached: 853544 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 467220 kB
/proc/meminfo: Inactive: 465092 kB
/proc/meminfo: HighTotal: 114156 kB
/proc/meminfo: HighFree: 228 kB
/proc/meminfo: LowTotal: 905296 kB
/proc/meminfo: LowFree: 27896 kB
/proc/meminfo: SwapTotal: 3028212 kB
/proc/meminfo: SwapFree: 3027756 kB
/proc/meminfo: Dirty: 3908 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 18200 kB
/proc/meminfo: Slab: 54144 kB
/proc/meminfo: CommitLimit: 3537936 kB
/proc/meminfo: Committed_AS: 20960 kB
/proc/meminfo: PageTables: 240 kB
/proc/meminfo: VmallocTotal: 114680 kB
/proc/meminfo: VmallocUsed: 1532 kB
/proc/meminfo: VmallocChunk: 113148 kB
/proc/bus/input/devices: I: Bus=0003 Vendor=05af Product=0319 Version=0000
/proc/bus/input/devices: N: Name="2.4G USB RF KeyBoard"
/proc/bus/input/devices: P: Phys=usb-0000:00:1d.1-1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120003
/proc/bus/input/devices: B: KEY=10000 7 ff800000 7ff febeffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: LED=1f
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=05af Product=0319 Version=0000
/proc/bus/input/devices: N: Name="2.4G USB RF KeyBoard"
/proc/bus/input/devices: P: Phys=usb-0000:00:1d.1-1/input1
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=mouse0
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=30000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=3
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=05af Product=0319 Version=0000
/proc/bus/input/devices: N: Name="2.4G USB RF KeyBoard"
/proc/bus/input/devices: P: Phys=usb-0000:00:1d.1-1/input2
/proc/bus/input/devices: S: Sysfs=/class/input/input2
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=100003
/proc/bus/input/devices: B: KEY=280 0 0 0 0 4 20000 3878 d801d101 1e0040 0 0 0
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=8086 Product=6772 Version=0091
/proc/bus/input/devices: N: Name="Intel Corporation Intel Front Panel"
/proc/bus/input/devices: P: Phys=usb-0000:00:1d.3-1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input3
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=12000f
/proc/bus/input/devices: B: KEY=42c43a2 20d0400 0 0 1 c04 7c000 a639fa d8415faf e0beffdf 1cfffff ffffffff fffffffe
/proc/bus/input/devices: B: REL=40
/proc/bus/input/devices: B: ABS=1f01 0
/proc/bus/input/devices: B: LED=ff1f
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 32 structures occupying 1537 bytes.
dmidecode: Table at 0x000E74D0.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: Vendor: Intel Corp.
dmidecode: Version: OM91510J.86A.0412.2005.1214.2346
dmidecode: Release Date: 12/14/2005
dmidecode: Address: 0xF0000
dmidecode: Runtime Size: 64 kB
dmidecode: ROM Size: 512 kB
dmidecode: Characteristics:
dmidecode: PCI is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: EDD is supported
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: ATAPI Zip drive boot is supported
dmidecode: BIOS boot specification is supported
dmidecode: Function key-initiated network boot is supported
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer: Paradigit
dmidecode: Product Name:
dmidecode: Version:
dmidecode: Serial Number:
dmidecode: UUID: BF548258-84DF-11D9-A323-000EA68F75B1
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 20 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: Intel Corporation
dmidecode: Product Name: D915POM
dmidecode: Version: AAC85587-304
dmidecode: Serial Number: AZOM50900733
dmidecode: Asset Tag: Base Board Asset Tag
dmidecode: Features:
dmidecode: Board is a hosting board
dmidecode: Board is replaceable
dmidecode: Location In Chassis: Base Board Chassis Location
dmidecode: Chassis Handle: 0x0003
dmidecode: Type: Unknown
dmidecode: Contained Object Handles: 0
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer:
dmidecode: Type: Unknown
dmidecode: Lock: Not Present
dmidecode: Version:
dmidecode: Serial Number:
dmidecode: Asset Tag:
dmidecode: Boot-up State: Safe
dmidecode: Power Supply State: Safe
dmidecode: Thermal State: Other
dmidecode: Security Status: Other
dmidecode: OEM Information: 0x00000000
dmidecode:
dmidecode: Handle 0x0004, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PRIMARY
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0005, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SECONDARY
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0006, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: ATX_PWR
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0007, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCIE X16 SLOT
dmidecode: Type: <OUT OF SPEC>
dmidecode: Current Usage: In Use
dmidecode: Length: Short
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode:
dmidecode: Handle 0x0008, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCIE X1 SLOT
dmidecode: Type: PCI Express
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode: SMBus signal is supported
dmidecode:
dmidecode: Handle 0x0009, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI SLOT 1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 1
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode: SMBus signal is supported
dmidecode:
dmidecode: Handle 0x000A, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI SLOT 2
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 2
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode: SMBus signal is supported
dmidecode:
dmidecode: Handle 0x000B, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI SLOT 3
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 3
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode: SMBus signal is supported
dmidecode:
dmidecode: Handle 0x000C, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Video
dmidecode: Status: Enabled
dmidecode: Description: Intel(R) Extreme Graphics 3 Controller
dmidecode:
dmidecode: Handle 0x000D, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Ethernet
dmidecode: Status: Enabled
dmidecode: Description: Intel (R) 82562 Ethernet Device
dmidecode:
dmidecode: Handle 0x000E, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Sound
dmidecode: Status: Enabled
dmidecode: Description: Intel(R) Azalia Audio Device
dmidecode:
dmidecode: Handle 0x000F, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 1
dmidecode: enUS
dmidecode: Currently Installed Language: enUS
dmidecode:
dmidecode: Handle 0x0010, DMI type 32, 20 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x0011, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: String 1: ETK_VER_02.00
dmidecode:
dmidecode: Handle 0x0012, DMI type 4, 35 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: J3E
dmidecode: Type: Central Processor
dmidecode: Family: Pentium 4
dmidecode: Manufacturer: Intel(R) Corporation
dmidecode: ID: 43 0F 00 00 FF FB EB BF
dmidecode: Signature: Type 0, Family 15, Model 4, Stepping 3
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: CLFSH (CLFLUSH instruction supported)
dmidecode: DS (Debug store)
dmidecode: ACPI (ACPI supported)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: SSE2 (Streaming SIMD extensions 2)
dmidecode: SS (Self-snoop)
dmidecode: HTT (Hyper-threading technology)
dmidecode: TM (Thermal monitor supported)
dmidecode: PBE (Pending break enabled)
dmidecode: Version: Intel(R) Pentium(R) 4 CPU 3.00GHz
dmidecode: Voltage: 3.0 V
dmidecode: External Clock: 200 MHz
dmidecode: Max Speed: 3600 MHz
dmidecode: Current Speed: 3000 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: Other
dmidecode: L1 Cache Handle: 0x0013
dmidecode: L2 Cache Handle: 0x0014
dmidecode: L3 Cache Handle: Not Provided
dmidecode: Serial Number: Not Specified
dmidecode: Asset Tag: Unknown
dmidecode: Part Number: Not Specified
dmidecode:
dmidecode: Handle 0x0013, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Unknown
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 16 KB
dmidecode: Maximum Size: 16 KB
dmidecode: Supported SRAM Types:
dmidecode: Asynchronous
dmidecode: Installed SRAM Type: Asynchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Data
dmidecode: Associativity: 8-way Set-associative
dmidecode:
dmidecode: Handle 0x0014, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Unknown
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 2048 KB
dmidecode: Maximum Size: 2048 KB
dmidecode: Supported SRAM Types:
dmidecode: Asynchronous
dmidecode: Installed SRAM Type: Asynchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Unified
dmidecode: Associativity: Fully Associative
dmidecode:
dmidecode: Handle 0x0015, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: None
dmidecode: Maximum Capacity: 4 GB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 4
dmidecode:
dmidecode: Handle 0x0016, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0015
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: J6H1
dmidecode: Bank Locator: CHAN A DIMM 0
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 400 MHz (2.5 ns)
dmidecode: Manufacturer: 0x7F7F7F0B00000000
dmidecode: Serial Number: 0x60371215
dmidecode: Asset Tag: Unknown
dmidecode: Part Number: 0x4D31553531323634445338484333472D3554
dmidecode:
dmidecode: Handle 0x0017, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x0016
dmidecode: Memory Array Mapped Address Handle: 0x001C
dmidecode: Partition Row Position: 1
dmidecode: Interleave Position: 1
dmidecode: Interleaved Data Depth: 1
dmidecode:
dmidecode: Handle 0x0018, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0015
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: 0 kB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: J6H2
dmidecode: Bank Locator: CHAN A DIMM 1
dmidecode: Type: DDR
dmidecode: Type Detail: None
dmidecode: Speed: Unknown
dmidecode: Manufacturer: NO DIMM
dmidecode: Serial Number: NO DIMM
dmidecode: Asset Tag: NO DIMM
dmidecode: Part Number: NO DIMM
dmidecode:
dmidecode: Handle 0x0019, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0015
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: J6J1
dmidecode: Bank Locator: CHAN B DIMM 0
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 400 MHz (2.5 ns)
dmidecode: Manufacturer: 0x7F7F7F0B00000000
dmidecode: Serial Number: 0x72481214
dmidecode: Asset Tag: Unknown
dmidecode: Part Number: 0x4D31553531323634445338484333472D3554
dmidecode:
dmidecode: Handle 0x001A, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00020000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x0019
dmidecode: Memory Array Mapped Address Handle: 0x001C
dmidecode: Partition Row Position: 2
dmidecode: Interleave Position: 2
dmidecode: Interleaved Data Depth: 1
dmidecode:
dmidecode: Handle 0x001B, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0015
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: 0 kB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: J6J2
dmidecode: Bank Locator: CHAN B DIMM 1
dmidecode: Type: DDR
dmidecode: Type Detail: None
dmidecode: Speed: Unknown
dmidecode: Manufacturer: NO DIMM
dmidecode: Serial Number: NO DIMM
dmidecode: Asset Tag: NO DIMM
dmidecode: Part Number: NO DIMM
dmidecode:
dmidecode: Handle 0x001C, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 1 GB
dmidecode: Physical Array Handle: 0x0015
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x001D, DMI type 187, 9 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: BB 09 1D 00 16 00 03 90 01
dmidecode:
dmidecode: Handle 0x001E, DMI type 187, 9 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: BB 09 1E 00 19 00 03 90 01
dmidecode:
dmidecode: Handle 0xFFFD, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: usb-storage-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: USB storage support
Package: scsi-common-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-common-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di
Description: Very common SCSI drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.17
Depends: di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.22
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6-15
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.07
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: floppy-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: floppy-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Floppy driver
Package: lowmemcheck
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.11
Provides: retriever
Depends: cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.13
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.42), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.32
Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.32
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.42), cdebconf-udeb (>= 0.97)
Description: Miscellaneous utilities for the debian installer
Package: serial-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: serial-modules
Depends: kernel-image-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Description: Serial drivers
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.104+b1
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: ide-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: ide-core-modules
Depends: kernel-image-2.6.16-2-486-di
Description: IDE support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.33
Depends: di-utils (>= 1.24)
Description: Skeleton root filesystem used by debian-installer
Package: pcmcia-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: pcmcia-modules
Depends: kernel-image-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Description: Common PCMCIA drivers
Package: udev-udeb
Status: install ok unpacked
Version: 0.093-1
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: scsi-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-core-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Core SCSI subsystem
Package: firewire-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.16-2-486-di, kernel-image-2.6.16-2-486-di
Description: Core FireWire drivers
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-3
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: pcmcia-storage-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.16-2-486-di, ide-core-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Description: PCMCIA storage drivers
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-3
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: usb-discover
Status: install ok unpacked
Version: 1.05
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.4
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.3.12-2
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.1-1)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.104+b1
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.43), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: load-cdrom
Status: install ok installed
Version: 1.11
Depends: cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.104+b1
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: iso-3166-udeb
Status: install ok installed
Version: 0.52-1
Description: provides iso_3166.tab file
Package: cdrom-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: cdrom-core-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, ide-modules-2.6.16-2-486-di
Description: CDROM support
Package: fat-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: fat-modules
Depends: kernel-image-2.6.16-2-486-di
Description: FAT filesystem support
Package: floppy-retriever
Status: install ok unpacked
Version: 1.09
Provides: retriever
Depends: mountfloppy
Description: Fetches modules from a floppy
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-2
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.17
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.40
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.43)
Description: Hardware architecture detector
Package: fb-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: fb-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Frame buffer support
Package: save-logs
Status: install ok unpacked
Version: 2.17
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.32
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.24
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: kernel-image-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: ide-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: ide-modules
Depends: kernel-image-2.6.16-2-486-di, ide-core-modules-2.6.16-2-486-di
Description: IDE drivers
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.0.0-7
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-2
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.1-2
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.0-2
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: input-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: input-modules
Depends: kernel-image-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: Input devices support
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.32
Description: Terminfo entries needed by newt/slang in debian installer
Package: scsi-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, parport-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Description: SCSI drivers
Package: hw-detect
Status: install ok installed
Version: 1.40
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.29
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.43
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: acpi-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: acpi-modules
Depends: kernel-image-2.6.16-2-486-di
Description: ACPI support modules
Package: firmware-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: firmware-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Firmware request modules
Package: sata-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: sata-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di
Description: SATA drivers
Package: cdrom-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: cdrom-modules
Depends: ide-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, kernel-image-2.6.16-2-486-di
Description: Esoteric CDROM drivers
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.17
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.6
Depends: di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.104
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: file-preseed
Status: install ok unpacked
Version: 1.17
Depends: di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: usb-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-modules
Depends: kernel-image-2.6.16-2-486-di
Description: USB support
Package: usb-serial-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-serial-modules
Depends: kernel-image-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: USB serial drivers
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.104+b1
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.4
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: cdrom-detect
Status: install ok installed
Version: 1.16
Depends: hw-detect, di-utils (>= 1.15)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: parport-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: parport-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Parallel port support
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-2.6-20060806
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: cdrom-detect
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: choose-mirror-bin
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: apt-mirror-setup, base-installer (>= 1.49)
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.64
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: cdebconf-newt-entropy
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.4
Depends: cdebconf-newt-udeb, libc6 (>= 2.3.6-6), libnewt0.52
Description: cdebconf newt plugin for reading from /dev/random
cdebconf plugin to facilitate reading random data from /dev/random.
Asks the user to enter random characters on the keyboard and shows a
progressbar with percent-of-data read.
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.04
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: os-prober, tzsetup-udeb, mounted-partitions
Description: set up clock
Installer-Menu-Item: 62
Package: cryptsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 400
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Version: 2:1.0.3-3
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2), libpopt0-udeb (>= 1.10), libuuid1-udeb, dmsetup-udeb
Description: configures encrypted block devices
Since kernel 2.6.4, encrypted filesystem support is provided by the device
mapper target dm-crypt. This utility provides a command-line interface for
configuring this facility. It has integrated support for LUKS.
.
cryptsetup is backwards compatible with the on-disk format of cryptoloop,
but also supports more secure formats. This package also includes support
for automatically configuring encrypted devices at boot time via the config
file /etc/crypttab. When combined with newer versions of the debian
initrd-tools and standard debian kernels, cryptoroot is also supported.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.32
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.42)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: dmsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.07-1
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Kernel Device Mapper userspace library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
.
This package contains a utility for modifying device mappings.
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 352
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 88
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.6
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, firmware-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
This udeb will install elilo on the hard disk.
Installer-Menu-Item: 76
Package: ethdetect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: ethernet-card-detection
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 140
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-10
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.4
Depends: archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: gnupg-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 664
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.3-2
Depends: libc6 (>= 2.3.6-6), libusb-0.1-udeb (>= 2:0.1.12), zlib1g-udeb (>= 1:1.2.1)
Description: GNU privacy guard - a free PGP replacement
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG packaged in minimal form for use in debian-installer.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1592
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6-15
Provides: libc6, libc-udeb, glibc-2.3.6-2, glibc-2.3.5-3
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.07-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libiw28-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 24
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 328
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libpopt0-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Paul Martin <pm@debian.org>
Version: 1.10-2
Depends: libc6 (>= 2.3.6-6)
Description: lib for parsing cmdline parameters
Popt was heavily influenced by the getopt() and getopt_long() functions,
but it allows more powerful argument expansion. It can parse arbitrary
argv[] style arrays and automatically set variables based on command
line arguments. It also allows command line arguments to be aliased via
configuration files and includes utility functions for parsing arbitrary
strings into argv[] arrays using shell-like rules.
.
This package contains the runtime library and locale data.
.
This is a minimal package for use in debian-installer.
Package: libusb-0.1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Aurelien Jarno <aurel32@debian.org>
Version: 2:0.1.12-2
Depends: libc6 (>= 2.3.5-1)
Provides: libusb-0.1-4
Description: userspace USB programming library
Library for programming USB applications without the knowledge
of Linux kernel internals.
.
More information can be found at the Linux USB web site
http://www.linux-usb.org/ .
.
This is a minimal package for use in debian-installer.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 20
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 204
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-aes-2.6.16-2-486-di
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 148
Maintainer: Max Vozeler <xam@debian.org>
Version: 3.1d+3+3
Depends: kernel-image-2.6.16-2-486-di, mount-aes-udeb (>= 2.12p-1)
Provides: loop-aes-modules
Description: loop-AES encryption modules for kernel 2.6.16-2-486-di
This package contains the loop-AES loadable Linux kernel modules
compiled for kernel 2.6.16-2-486-di
.
loop-AES can be used to encrypt disk partitions, removable media,
swap space and other devices. It provides measures to strengthen
the encryption: Passphrase seeds, multiple hash iterations, MD5 IV
and use of alternating encryption keys.
.
Encryption keys can be stored in a GnuPG-encrypted keyfile, which
allows the passphrase to be changed without re-encryption. Keyfiles
can also be encrypted asymmetrically for multi-user access.
.
This package includes the cipher modules blowfish, twofish and
serpent in addition to the default cipher (AES).
.
If you compiled a custom kernel, you will most likely need to
compile a custom version of these modules as well. The package
loop-aes-source has been provided for this purpose.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 396
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-2
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 140
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.2-7
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD device arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
devices (software RAID), as well as multipath devices.
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb, partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-3
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: mount-aes-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 216
Maintainer: Max Vozeler <xam@debian.org>
Version: 2.12r-13
Depends: libblkid1-udeb (>= 1.37-1), libc6 (>= 2.3.6-6), libuuid1-udeb
Description: Mount utils for loop-AES
loop-AES patched mount, losetup and swapon
Package: netcfg
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 788
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Provides: configured-network
Description: Configure the network
To install additional installer components or the Debian Base System over
the network, you need to configure the network in the installer. This
component will first try to configure your network with DHCP and ask
you for static network configuration if this fails. The configured
network settings will be copied to your newly installed system.
Installer-Menu-Item: 18
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfstools-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 164
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.12.1-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 60
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 656
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 54
Depends: di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base (>= 73), partman-auto (>= 51), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 836
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 92
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 564
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 692
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-base (>= 87), partman-crypto-dm, partman-crypto-loop, cdebconf-newt-entropy (>= 0.3), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-crypto-dm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-crypto, crypto-modules, cryptsetup-udeb
Description: Add to partman support for dm-crypt encryption
Package: partman-crypto-loop
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-crypto, loop-aes-modules, mount-aes-udeb, gnupg-udeb
Description: Add to partman support for loop-AES encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 10
Depends: partman-base
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 41
Depends: e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 252
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 616
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 45
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 40
Depends: ntfstools-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Depends: mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 228
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-8
Description: PCMCIA Card Services for Linux (udeb)
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.07.1
Depends: apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.10
Depends: localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.4
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.4-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This minimal package includes the shared library
for use with the Debian installer.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii reportbug 3.21.2 reports bugs in the Debian distrib
-- no debconf information
--- End Message ---