Bug#382421: marked as done ()
Your message dated Wed, 08 Sep 2010 03:58:16 +0000
with message-id <E1OtBnc-0005Gl-G7@ravel.debian.org>
and subject line Closing old installation report #382421
has caused the Debian Bug report #382421,
regarding
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)
--
382421: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=382421
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Boot method: CD daily build iso then network
Image version: 2006-08-09 - debian homepage
Date: 2006-08-09 22:00
Machine: dell inspiron 9100 laptop
Processor:P4 2.8 GHz
Memory:1 GB
Partitions: <df -Tl will do; the raw partition table is preferred>
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/hda9 ext3 1369978 104863 1192021 9% /
tmpfs tmpfs 517908 0 517908 0% /dev/shm
/dev/hda13 ext3 3091284 77308 2856944 3% /home
/dev/hda11 ext3 6728280 3052464 3334036 48% /usr
/dev/hda12 ext3 2403496 1398760 882644 62% /var
tmpfs tmpfs 10240 204 10036 2% /dev
Output of lspci and lspci -n:
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Inte rface (rev 02)
00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr oller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr oller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr oller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr oller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Cont roller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Brid ge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) A C'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9 600 M10]
02:00.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
02:01.0 CardBus bridge: Texas Instruments PCI4510 PC card Cardbus Controller (re v 02)
02:01.1 FireWire (IEEE 1394): Texas Instruments PCI4510 IEEE-1394 Controller
02:03.0 Network controller: Broadcom Corporation BCM4309 802.11a/b/g (rev 02)
lspci -n
00:00.0 0600: 8086:2570 (rev 02)
00:01.0 0604: 8086:2571 (rev 02)
00:1d.0 0c03: 8086:24d2 (rev 02)
00:1d.1 0c03: 8086:24d4 (rev 02)
00:1d.2 0c03: 8086:24d7 (rev 02)
00:1d.3 0c03: 8086:24de (rev 02)
00:1d.7 0c03: 8086:24dd (rev 02)
00:1e.0 0604: 8086:244e (rev c2)
00:1f.0 0601: 8086:24d0 (rev 02)
00:1f.1 0101: 8086:24db (rev 02)
00:1f.5 0401: 8086:24d5 (rev 02)
00:1f.6 0703: 8086:24d6 (rev 02)
01:00.0 0300: 1002:4e50
02:00.0 0200: 14e4:4401 (rev 01)
02:01.0 0607: 104c:ac44 (rev 02)
02:01.1 0c00: 104c:8029
02:03.0 0280: 14e4:4324 (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [ 0]
Configure network HW: [0 ]
Config network: [ 0]
Detect CD: [0 ]
Load installer modules: [0 ]
Detect hard drives: [0 ]
Partition hard drives: [0 ]
Create file systems: [ 0]
Mount partitions: [0 ]
Install base system: [ 0]
Install boot loader: [0 ]
Reboot: [ 0]
Comments/Problems:i did the gui install very nice
but i had a problem with the question : clock congiguration UTC ? i don't know what to answer was the
check flag a YES or was it a NO after install i noticed that debian screwed my clock setting to UTC times instead of local time.
i check for the default desktop after install i notised that this was gnome i prefere KDE and had to install it afterward
in the gui install it took some time time to get used to the fact that in details ( shell menu ) i had to answer questions this was not obvious upfront it took a long time ( more than 30 minutes ) to discovere this problem after that no problems at all, but a newbie could be looking in the dark and thinking the instalation has stalled.
install works great
Wacom Intuos 2 works in conjuction with logitech wheel mouse.
wacom pen workt
philips pcv740k webcam lights up but doesn't screw up the usb bus anymore great plus.
network:works better , debian stable has a problem with dual boot with winxp.
After warm reboot from winxp debian was not able to configure the network properly.
This problem seems to be solved now with sid on my system i can warm reboot to debian now and get an working intenet connection.
3d ATI acceleration not tested - this was a great problem in debian stable
video resolution of 1900x1200 works great.
in the gui install it would be great for example to combine certain quistions for example
localisation : time and language in one template.
i selected non free packedges but after install i could not select acrobat reader \
i know that kde or gnome have pdf reader with a tested they have greatly improved butthey lack some of the small featured witch acrobat has.
acrobat reader is a killer application for me without it linux is only 50% functional.
i have to sort out if a can install this program via apt or via the adobe site program download.
just my 0.02 cents
Jan Beldman
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---
Reply to: