--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: installation-report: Thinkpad X31 netboot success
- From: Malcolm Gillies <bts@ouabain.org>
- Date: Sun, 6 Aug 2006 14:38:55 +1000
- Message-id: <20060806043855.GA28574@opium>
Package: installation-reports
Version: 2.17
Severity: normal
-- Package-specific info:
Boot method: network
Image version: http://people.debian.org/~joeyh/d-i/images/daily/netboot/netboot.tar.gz 20060730
Date: 2006-08-05
Machine: IBM Thinkpad X31
Partitions:
Device Boot Start End #cyls #blocks Id System
/dev/hda1 0+ 812 813- 6146248+ c W95 FAT32 (LBA)
/dev/hda2 * 813 818 6 45360 83 Linux
/dev/hda3 819 5167 4349 32878440 5 Extended
/dev/hda4 0 - 0 0 0 Empty
/dev/hda5 819+ 950 132- 997888+ 82 Linux swap /
Solaris
/dev/hda6 951+ 5167 4217- 31880488+ 83 Linux
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
Very easy and problem-free install! My first brush with d-i in 3 years.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20060729)"
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux thebaine 2.6.16-2-486 #1 Sat Jul 15 21:23:01 UTC 2006 i686 unknown
lspci -v -t: -[0000:00]-+-00.0 Intel Corporation 82855PM Processor to I/O Controller
lspci -v -t: +-01.0-[0000:01]----00.0 ATI Technologies Inc Radeon Mobility M6 LY
lspci -v -t: +-1d.0 Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
lspci -v -t: +-1d.1 Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
lspci -v -t: +-1d.2 Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
lspci -v -t: +-1d.7 Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller
lspci -v -t: +-1e.0-[0000:02-08]--+-00.0 Ricoh Co Ltd RL5c476 II
lspci -v -t: | +-00.1 Ricoh Co Ltd RL5c476 II
lspci -v -t: | +-00.2 Ricoh Co Ltd R5C552 IEEE 1394 Controller
lspci -v -t: | +-02.0 Intel Corporation PRO/Wireless 2200BG Network Connection
lspci -v -t: | \-08.0 Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller
lspci -v -t: +-1f.0 Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge
lspci -v -t: +-1f.1 Intel Corporation 82801DBM (ICH4-M) IDE Controller
lspci -v -t: +-1f.3 Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller
lspci -v -t: +-1f.5 Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
lspci -v -t: \-1f.6 Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller
lspci -n: 00:00.0 0600: 8086:3340 (rev 03)
lspci -n: 00:01.0 0604: 8086:3341 (rev 03)
lspci -n: 00:1d.0 0c03: 8086:24c2 (rev 01)
lspci -n: 00:1d.1 0c03: 8086:24c4 (rev 01)
lspci -n: 00:1d.2 0c03: 8086:24c7 (rev 01)
lspci -n: 00:1d.7 0c03: 8086:24cd (rev 01)
lspci -n: 00:1e.0 0604: 8086:2448 (rev 81)
lspci -n: 00:1f.0 0601: 8086:24cc (rev 01)
lspci -n: 00:1f.1 0101: 8086:24ca (rev 01)
lspci -n: 00:1f.3 0c05: 8086:24c3 (rev 01)
lspci -n: 00:1f.5 0401: 8086:24c5 (rev 01)
lspci -n: 00:1f.6 0703: 8086:24c6 (rev 01)
lspci -n: 01:00.0 0300: 1002:4c59
lspci -n: 02:00.0 0607: 1180:0476 (rev aa)
lspci -n: 02:00.1 0607: 1180:0476 (rev aa)
lspci -n: 02:00.2 0c00: 1180:0552 (rev 02)
lspci -n: 02:02.0 0280: 8086:4220 (rev 05)
lspci -n: 02:08.0 0200: 8086:103d (rev 81)
lspci -v: 00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
lspci -v: Subsystem: IBM Unknown device 0529
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Memory at d0000000 (32-bit, prefetchable) [size=256M]
lspci -v: Capabilities: [e4] Vendor Specific Information
lspci -v: Capabilities: [a0] AGP version 2.0
lspci -v:
lspci -v: 00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03)
lspci -v: Flags: bus master, 66MHz, fast devsel, latency 96
lspci -v: Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
lspci -v: I/O behind bridge: 00003000-00003fff
lspci -v: Memory behind bridge: c0100000-c01fffff
lspci -v: Prefetchable memory behind bridge: e0000000-e7ffffff
lspci -v:
lspci -v: 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
lspci -v: Subsystem: IBM Unknown device 052d
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 11
lspci -v: I/O ports at 1800 [size=32]
lspci -v:
lspci -v: 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
lspci -v: Subsystem: IBM Unknown device 052d
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 11
lspci -v: I/O ports at 1820 [size=32]
lspci -v:
lspci -v: 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
lspci -v: Subsystem: IBM Unknown device 052d
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 11
lspci -v: I/O ports at 1840 [size=32]
lspci -v:
lspci -v: 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) (prog-if 20)
lspci -v: Subsystem: IBM Unknown device 052e
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 11
lspci -v: Memory at c0000000 (32-bit, non-prefetchable) [size=1K]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v: Capabilities: [58] Debug port
lspci -v:
lspci -v: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=02, subordinate=08, sec-latency=64
lspci -v: I/O behind bridge: 00004000-00008fff
lspci -v: Memory behind bridge: c0200000-cfffffff
lspci -v: Prefetchable memory behind bridge: e8000000-efffffff
lspci -v:
lspci -v: 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
lspci -v: Flags: bus master, medium devsel, latency 0
lspci -v:
lspci -v: 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
lspci -v: Subsystem: IBM Unknown device 052d
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 11
lspci -v: I/O ports at <unassigned>
lspci -v: I/O ports at <unassigned>
lspci -v: I/O ports at <unassigned>
lspci -v: I/O ports at <unassigned>
lspci -v: I/O ports at 1860 [size=16]
lspci -v: Memory at 30000000 (32-bit, non-prefetchable) [size=1K]
lspci -v:
lspci -v: 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
lspci -v: Subsystem: IBM Unknown device 052d
lspci -v: Flags: medium devsel, IRQ 11
lspci -v: I/O ports at 1880 [size=32]
lspci -v:
lspci -v: 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
lspci -v: Subsystem: IBM Unknown device 0534
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 11
lspci -v: I/O ports at 1c00 [size=256]
lspci -v: I/O ports at 18c0 [size=64]
lspci -v: Memory at c0000c00 (32-bit, non-prefetchable) [size=512]
lspci -v: Memory at c0000800 (32-bit, non-prefetchable) [size=256]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v:
lspci -v: 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
lspci -v: Subsystem: IBM Unknown device 0524
lspci -v: Flags: medium devsel, IRQ 11
lspci -v: I/O ports at 2400 [size=256]
lspci -v: I/O ports at 2000 [size=128]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v:
lspci -v: 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY
lspci -v: Subsystem: IBM Unknown device 052f
lspci -v: Flags: bus master, stepping, fast Back2Back, 66MHz, medium devsel, latency 66, IRQ 11
lspci -v: Memory at e0000000 (32-bit, prefetchable) [size=128M]
lspci -v: I/O ports at 3000 [size=256]
lspci -v: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
lspci -v: [virtual] Expansion ROM at c0120000 [disabled] [size=128K]
lspci -v: Capabilities: [58] AGP version 2.0
lspci -v: Capabilities: [50] Power Management version 2
lspci -v:
lspci -v: 02:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
lspci -v: Subsystem: IBM Unknown device 0532
lspci -v: Flags: bus master, medium devsel, latency 168, IRQ 11
lspci -v: Memory at b0000000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
lspci -v: Memory window 0: e8000000-e9fff000 (prefetchable)
lspci -v: Memory window 1: c2000000-c3fff000
lspci -v: I/O window 0: 00004000-000040ff
lspci -v: I/O window 1: 00004400-000044ff
lspci -v: 16-bit legacy interface ports at 0001
lspci -v:
lspci -v: 02:00.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
lspci -v: Subsystem: IBM Unknown device 0532
lspci -v: Flags: bus master, medium devsel, latency 168, IRQ 11
lspci -v: Memory at b1000000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Bus: primary=02, secondary=07, subordinate=07, sec-latency=176
lspci -v: Memory window 0: ea000000-ebfff000 (prefetchable)
lspci -v: Memory window 1: c4000000-c5fff000
lspci -v: I/O window 0: 00004800-000048ff
lspci -v: I/O window 1: 00004c00-00004cff
lspci -v: 16-bit legacy interface ports at 0001
lspci -v:
lspci -v: 02:00.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 02) (prog-if 10)
lspci -v: Subsystem: IBM Unknown device 0533
lspci -v: Flags: bus master, medium devsel, latency 64, IRQ 11
lspci -v: Memory at c0202000 (32-bit, non-prefetchable) [size=2K]
lspci -v: Capabilities: [dc] Power Management version 2
lspci -v:
lspci -v: 02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
lspci -v: Subsystem: Intel Corporation Unknown device 2701
lspci -v: Flags: bus master, medium devsel, latency 64, IRQ 11
lspci -v: Memory at c0200000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Capabilities: [dc] Power Management version 2
lspci -v:
lspci -v: 02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 81)
lspci -v: Subsystem: IBM Unknown device 0522
lspci -v: Flags: bus master, medium devsel, latency 66, IRQ 11
lspci -v: Memory at c0201000 (32-bit, non-prefetchable) [size=4K]
lspci -v: I/O ports at 8000 [size=64]
lspci -v: Capabilities: [dc] Power Management version 2
lspci -v:
lspci -x: 00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
lspci -x: 00: 86 80 40 33 06 01 90 20 03 00 00 06 00 00 00 00
lspci -x: 10: 08 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 29 05
lspci -x: 30: 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03)
lspci -x: 00: 86 80 41 33 07 01 a0 00 03 00 04 06 00 60 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 01 01 40 30 30 a0 22
lspci -x: 20: 10 c0 10 c0 00 e0 f0 e7 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00
lspci -x:
lspci -x: 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
lspci -x: 00: 86 80 c2 24 05 00 80 02 01 00 03 0c 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 01 18 00 00 00 00 00 00 00 00 00 00 14 10 2d 05
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
lspci -x:
lspci -x: 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
lspci -x: 00: 86 80 c4 24 05 00 80 02 01 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 21 18 00 00 00 00 00 00 00 00 00 00 14 10 2d 05
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
lspci -x:
lspci -x: 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
lspci -x: 00: 86 80 c7 24 05 00 80 02 01 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 41 18 00 00 00 00 00 00 00 00 00 00 14 10 2d 05
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 00
lspci -x:
lspci -x: 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
lspci -x: 00: 86 80 cd 24 06 01 90 02 01 20 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 2e 05
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 04 00 00
lspci -x:
lspci -x: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
lspci -x: 00: 86 80 48 24 07 01 80 80 81 00 04 06 00 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 02 08 40 40 80 80 22
lspci -x: 20: 20 c0 f0 cf 00 e8 f0 ef 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00
lspci -x:
lspci -x: 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
lspci -x: 00: 86 80 cc 24 0f 00 80 02 01 00 01 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)
lspci -x: 00: 86 80 ca 24 07 00 80 02 01 8a 01 01 00 00 00 00
lspci -x: 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
lspci -x: 20: 61 18 00 00 00 00 00 30 00 00 00 00 14 10 2d 05
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00
lspci -x:
lspci -x: 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
lspci -x: 00: 86 80 c3 24 01 00 80 02 01 00 05 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 81 18 00 00 00 00 00 00 00 00 00 00 14 10 2d 05
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
lspci -x:
lspci -x: 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
lspci -x: 00: 86 80 c5 24 07 00 90 02 01 00 01 04 00 00 00 00
lspci -x: 10: 01 1c 00 00 c1 18 00 00 00 0c 00 c0 00 08 00 c0
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 34 05
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 02 00 00
lspci -x:
lspci -x: 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
lspci -x: 00: 86 80 c6 24 01 00 90 02 01 00 03 07 00 00 00 00
lspci -x: 10: 01 24 00 00 01 20 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 24 05
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 02 00 00
lspci -x:
lspci -x: 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY
lspci -x: 00: 02 10 59 4c 87 03 b0 02 00 00 00 03 08 42 00 00
lspci -x: 10: 08 00 00 e0 01 30 00 00 00 00 10 c0 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 2f 05
lspci -x: 30: 00 00 00 00 58 00 00 00 00 00 00 00 0b 01 08 00
lspci -x:
lspci -x: 02:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
lspci -x: 00: 80 11 76 04 07 00 10 02 aa 00 07 06 00 a8 82 00
lspci -x: 10: 00 00 00 b0 dc 00 00 02 02 03 06 b0 00 00 00 e8
lspci -x: 20: 00 f0 ff e9 00 00 00 c2 00 f0 ff c3 00 40 00 00
lspci -x: 30: fc 40 00 00 00 44 00 00 fc 44 00 00 0b 01 80 05
lspci -x: 40: 14 10 32 05 01 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 02:00.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
lspci -x: 00: 80 11 76 04 07 00 10 02 aa 00 07 06 00 a8 82 00
lspci -x: 10: 00 00 00 b1 dc 00 00 02 02 07 07 b0 00 00 00 ea
lspci -x: 20: 00 f0 ff eb 00 00 00 c4 00 f0 ff c5 00 48 00 00
lspci -x: 30: fc 48 00 00 00 4c 00 00 fc 4c 00 00 0b 02 80 05
lspci -x: 40: 14 10 32 05 01 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 02:00.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 02)
lspci -x: 00: 80 11 52 05 06 01 10 02 02 10 00 0c 00 40 80 00
lspci -x: 10: 00 20 20 c0 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 33 05
lspci -x: 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 03 02 04
lspci -x:
lspci -x: 02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
lspci -x: 00: 86 80 20 42 16 01 90 02 05 00 80 02 08 40 00 00
lspci -x: 10: 00 00 20 c0 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 01 27
lspci -x: 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 03 18
lspci -x:
lspci -x: 02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 81)
lspci -x: 00: 86 80 3d 10 17 01 90 02 81 00 00 02 08 42 00 00
lspci -x: 10: 00 10 20 c0 01 80 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 22 05
lspci -x: 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 08 38
lspci -x:
lsmod: Module Size Used by
lsmod: sd_mod 16528 0
lsmod: nls_iso8859_1 4224 0
lsmod: nls_cp437 5888 0
lsmod: qnx4 10612 0
lsmod: ntfs 189580 0
lsmod: xfs 483476 0
lsmod: exportfs 5248 1 xfs
lsmod: reiserfs 218352 0
lsmod: jfs 158556 0
lsmod: ext3 115976 2
lsmod: jbd 46996 1 ext3
lsmod: vfat 11520 0
lsmod: fat 46876 1 vfat
lsmod: isofs 32192 0
lsmod: ide_cd 35488 0
lsmod: cdrom 32176 1 ide_cd
lsmod: ide_generic 1408 0 [permanent]
lsmod: aec62xx 6784 0 [permanent]
lsmod: alim15x3 11024 0 [permanent]
lsmod: amd74xx 12956 0 [permanent]
lsmod: atiixp 5392 0 [permanent]
lsmod: cmd64x 10012 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7812 0 [permanent]
lsmod: ns87415 4268 0 [permanent]
lsmod: opti621 4100 0 [permanent]
lsmod: pdc202xx_new 8064 0 [permanent]
lsmod: pdc202xx_old 9600 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6656 0 [permanent]
lsmod: serverworks 8328 0 [permanent]
lsmod: siimage 11008 0 [permanent]
lsmod: sis5513 12300 0 [permanent]
lsmod: slc90e66 5120 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 4100 0 [permanent]
lsmod: via82cxxx 8196 0 [permanent]
lsmod: usb_storage 69696 0
lsmod: ide_disk 14976 4
lsmod: parport_pc 31728 0
lsmod: parport 31944 1 parport_pc
lsmod: piix 9092 0 [permanent]
lsmod: generic 4356 0 [permanent]
lsmod: ide_core 111280 30 ide_cd,ide_generic,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_new,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_disk,piix,generic
lsmod: sbp2 19588 0
lsmod: scsi_mod 122444 3 sd_mod,usb_storage,sbp2
lsmod: floppy 55852 0
lsmod: vga16fb 11528 2
lsmod: vgastate 7680 1 vga16fb
lsmod: usbserial 28364 0
lsmod: usbhid 32352 0
lsmod: usbkbd 6656 0
lsmod: eth1394 18180 0
lsmod: thermal 13192 0
lsmod: processor 21952 1 thermal
lsmod: fan 4740 0
lsmod: pcmcia 35132 0
lsmod: firmware_class 9728 1 pcmcia
lsmod: ehci_hcd 27144 0
lsmod: uhci_hcd 27152 0
lsmod: usbcore 111008 7 usb_storage,usbserial,usbhid,usbkbd,ehci_hcd,uhci_hcd
lsmod: yenta_socket 24076 2
lsmod: rsrc_nonstatic 12160 1 yenta_socket
lsmod: pcmcia_core 37392 3 pcmcia,yenta_socket,rsrc_nonstatic
lsmod: ohci1394 29488 0
lsmod: ieee1394 85816 3 sbp2,eth1394,ohci1394
lsmod: eepro100 28304 0
lsmod: e100 31876 0
lsmod: mii 5248 2 eepro100,e100
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 258020 424 257596 0% /dev
df: tmpfs 258020 424 257596 0% /dev
df: tmpfs 258020 424 257596 0% /.dev
df: /dev/ide/host0/bus0/target0/lun0/part6 31379656 2234280 27551352 8% /target
df: /dev/ide/host0/bus0/target0/lun0/part2 42501 10380 29853 26% /target/boot
free: total used free shared buffers
free: Mem: 516040 475536 40504 0 41052
free: Swap: 997880 420 997460
free: Total: 1513920 475956 1037964
cardctl status: Socket 0:
cardctl status: no card
cardctl status: Socket 1:
cardctl status: no card
cardctl ident: Socket 0:
cardctl ident: no product info available
cardctl ident: Socket 1:
cardctl ident: no product info available
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 34: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 35: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 9
/proc/cpuinfo: model name : Intel(R) Pentium(R) M processor 1400MHz
/proc/cpuinfo: stepping : 5
/proc/cpuinfo: cpu MHz : 599.579
/proc/cpuinfo: cache size : 1024 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 2
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 tm pbe est tm2
/proc/cpuinfo: bogomips : 1201.16
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 03bc-03be : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 1000-107f : 0000:00:1f.0
/proc/ioports: 1000-107f : motherboard
/proc/ioports: 1000-1003 : PM1a_EVT_BLK
/proc/ioports: 1004-1005 : PM1a_CNT_BLK
/proc/ioports: 1008-100b : PM_TMR
/proc/ioports: 1010-1015 : ACPI CPU throttle
/proc/ioports: 1020-1020 : PM2_CNT_BLK
/proc/ioports: 1028-102f : GPE0_BLK
/proc/ioports: 1180-11bf : 0000:00:1f.0
/proc/ioports: 1180-11bf : motherboard
/proc/ioports: 15e0-15ef : motherboard
/proc/ioports: 1600-167f : motherboard
/proc/ioports: 1800-181f : 0000:00:1d.0
/proc/ioports: 1800-181f : uhci_hcd
/proc/ioports: 1820-183f : 0000:00:1d.1
/proc/ioports: 1820-183f : uhci_hcd
/proc/ioports: 1840-185f : 0000:00:1d.2
/proc/ioports: 1840-185f : uhci_hcd
/proc/ioports: 1860-186f : 0000:00:1f.1
/proc/ioports: 1860-1867 : ide0
/proc/ioports: 1868-186f : ide1
/proc/ioports: 1880-189f : 0000:00:1f.3
/proc/ioports: 18c0-18ff : 0000:00:1f.5
/proc/ioports: 1c00-1cff : 0000:00:1f.5
/proc/ioports: 2000-207f : 0000:00:1f.6
/proc/ioports: 2400-24ff : 0000:00:1f.6
/proc/ioports: 3000-3fff : PCI Bus #01
/proc/ioports: 3000-30ff : 0000:01:00.0
/proc/ioports: 4000-8fff : PCI Bus #02
/proc/ioports: 4000-40ff : PCI CardBus #03
/proc/ioports: 4400-44ff : PCI CardBus #03
/proc/ioports: 4800-48ff : PCI CardBus #07
/proc/ioports: 4c00-4cff : PCI CardBus #07
/proc/ioports: 8000-803f : 0000:02:08.0
/proc/ioports: 8000-803f : e100
/proc/iomem: 00000000-0009ebff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009ec00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000cffff : Video ROM
/proc/iomem: 000d0000-000d0fff : Adapter ROM
/proc/iomem: 000d1000-000d1fff : Adapter ROM
/proc/iomem: 000d2000-000d3fff : reserved
/proc/iomem: 000e0000-000effff : Extension ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-1ff5ffff : System RAM
/proc/iomem: 00100000-00273102 : Kernel code
/proc/iomem: 00273103-00301c23 : Kernel data
/proc/iomem: 1ff60000-1ff76fff : ACPI Tables
/proc/iomem: 1ff77000-1ff78fff : ACPI Non-volatile Storage
/proc/iomem: 1ff80000-1fffffff : reserved
/proc/iomem: 30000000-300003ff : 0000:00:1f.1
/proc/iomem: b0000000-b0000fff : 0000:02:00.0
/proc/iomem: b0000000-b0000fff : yenta_socket
/proc/iomem: b1000000-b1000fff : 0000:02:00.1
/proc/iomem: b1000000-b1000fff : yenta_socket
/proc/iomem: c0000000-c00003ff : 0000:00:1d.7
/proc/iomem: c0000000-c00003ff : ehci_hcd
/proc/iomem: c0000800-c00008ff : 0000:00:1f.5
/proc/iomem: c0000c00-c0000dff : 0000:00:1f.5
/proc/iomem: c0100000-c01fffff : PCI Bus #01
/proc/iomem: c0100000-c010ffff : 0000:01:00.0
/proc/iomem: c0120000-c013ffff : 0000:01:00.0
/proc/iomem: c0200000-cfffffff : PCI Bus #02
/proc/iomem: c0200000-c0200fff : 0000:02:02.0
/proc/iomem: c0201000-c0201fff : 0000:02:08.0
/proc/iomem: c0201000-c0201fff : e100
/proc/iomem: c0202000-c02027ff : 0000:02:00.2
/proc/iomem: c0202000-c02027ff : ohci1394
/proc/iomem: c2000000-c3ffffff : PCI CardBus #03
/proc/iomem: c4000000-c5ffffff : PCI CardBus #07
/proc/iomem: d0000000-dfffffff : 0000:00:00.0
/proc/iomem: e0000000-e7ffffff : PCI Bus #01
/proc/iomem: e0000000-e7ffffff : 0000:01:00.0
/proc/iomem: e8000000-efffffff : PCI Bus #02
/proc/iomem: e8000000-e9ffffff : PCI CardBus #03
/proc/iomem: ea000000-ebffffff : PCI CardBus #07
/proc/iomem: ff800000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 1361302 XT-PIC timer
/proc/interrupts: 1: 1140 XT-PIC i8042
/proc/interrupts: 2: 0 XT-PIC cascade
/proc/interrupts: 7: 2 XT-PIC parport0
/proc/interrupts: 9: 92 XT-PIC acpi
/proc/interrupts: 11: 565533 XT-PIC ohci1394, yenta, yenta, uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, ehci_hcd:usb4, eth0
/proc/interrupts: 14: 116476 XT-PIC ide0
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 0
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 516040 kB
/proc/meminfo: MemFree: 40368 kB
/proc/meminfo: Buffers: 41052 kB
/proc/meminfo: Cached: 374236 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 228424 kB
/proc/meminfo: Inactive: 203436 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 516040 kB
/proc/meminfo: LowFree: 40368 kB
/proc/meminfo: SwapTotal: 997880 kB
/proc/meminfo: SwapFree: 997460 kB
/proc/meminfo: Dirty: 4028 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 18316 kB
/proc/meminfo: Slab: 36316 kB
/proc/meminfo: CommitLimit: 1255900 kB
/proc/meminfo: Committed_AS: 20440 kB
/proc/meminfo: PageTables: 232 kB
/proc/meminfo: VmallocTotal: 777936 kB
/proc/meminfo: VmallocUsed: 6704 kB
/proc/meminfo: VmallocChunk: 770628 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab54
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.33 present.
dmidecode: 57 structures occupying 2013 bytes.
dmidecode: Table at 0x000E0010.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: Vendor: IBM
dmidecode: Version: 1QET97WW (3.02 )
dmidecode: Release Date: 09/22/2005
dmidecode: Address: 0xDC000
dmidecode: Runtime Size: 144 kB
dmidecode: ROM Size: 1024 kB
dmidecode: Characteristics:
dmidecode: PCI is supported
dmidecode: PC Card (PCMCIA) is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: ESCD support is available
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: EDD is supported
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: AGP is supported
dmidecode: BIOS boot specification is supported
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer: IBM
dmidecode: Product Name: 2672CM3
dmidecode: Version: ThinkPad X31
dmidecode: Serial Number: 99RHYZX
dmidecode: UUID: EE4AFE81-463E-11CB-9F17-C603CAC6AFD8
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: IBM
dmidecode: Product Name: 2672CM3
dmidecode: Version: Not Available
dmidecode: Serial Number: J1SWC39L1L9
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: IBM
dmidecode: Type: Notebook
dmidecode: Lock: Not Present
dmidecode: Version: Not Available
dmidecode: Serial Number: Not Available
dmidecode: Asset Tag: No Asset Information
dmidecode: Boot-up State: Unknown
dmidecode: Power Supply State: Unknown
dmidecode: Thermal State: Unknown
dmidecode: Security Status: Unknown
dmidecode: OEM Information: 0x00000000
dmidecode:
dmidecode: Handle 0x0004, DMI type 126, 17 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0005, DMI type 126, 17 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0006, DMI type 4, 35 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: None
dmidecode: Type: Central Processor
dmidecode: Family: Pentium M
dmidecode: Manufacturer: GenuineIntel
dmidecode: ID: 95 06 00 00 BF F9 E9 A7
dmidecode: Signature: Type 0, Family 6, Model 9, Stepping 5
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: CLFSH (CLFLUSH instruction supported)
dmidecode: DS (Debug store)
dmidecode: ACPI (ACPI supported)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: SSE2 (Streaming SIMD extensions 2)
dmidecode: TM (Thermal monitor supported)
dmidecode: PBE (Pending break enabled)
dmidecode: Version: Intel(R) Pentium(R) M processor
dmidecode: Voltage: 1.5 V
dmidecode: External Clock: 400 MHz
dmidecode: Max Speed: 1400 MHz
dmidecode: Current Speed: 1400 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: None
dmidecode: L1 Cache Handle: 0x000A
dmidecode: L2 Cache Handle: 0x000B
dmidecode: L3 Cache Handle: Not Provided
dmidecode: Serial Number: Not Specified
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: Not Specified
dmidecode:
dmidecode: Handle 0x0007, DMI type 5, 20 bytes
dmidecode: Memory Controller Information
dmidecode: Error Detecting Method: None
dmidecode: Error Correcting Capabilities:
dmidecode: None
dmidecode: Supported Interleave: One-way Interleave
dmidecode: Current Interleave: One-way Interleave
dmidecode: Maximum Memory Module Size: 1024 MB
dmidecode: Maximum Total Memory Size: 2048 MB
dmidecode: Supported Speeds:
dmidecode: Other
dmidecode: Supported Memory Types:
dmidecode: DIMM
dmidecode: SDRAM
dmidecode: Memory Module Voltage: 2.9 V
dmidecode: Associated Memory Slots: 2
dmidecode: 0x0008
dmidecode: 0x0009
dmidecode: Enabled Error Correcting Capabilities:
dmidecode: None
dmidecode:
dmidecode: Handle 0x0008, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM Slot 1
dmidecode: Bank Connections: 0 1
dmidecode: Current Speed: Unknown
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: 512 MB (Double-bank Connection)
dmidecode: Enabled Size: 512 MB (Double-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0009, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM Slot 2
dmidecode: Bank Connections: 2 3
dmidecode: Current Speed: Unknown
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000A, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Internal L1 Cache
dmidecode: Configuration: Enabled, Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 32 KB
dmidecode: Maximum Size: 32 KB
dmidecode: Supported SRAM Types:
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Synchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Other
dmidecode: Associativity: 8-way Set-associative
dmidecode:
dmidecode: Handle 0x000B, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Internal L2 Cache
dmidecode: Configuration: Enabled, Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 1024 KB
dmidecode: Maximum Size: 1024 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Installed SRAM Type: Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Multi-bit ECC
dmidecode: System Type: Unified
dmidecode: Associativity: 8-way Set-associative
dmidecode:
dmidecode: Handle 0x000C, DMI type 126, 9 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x000D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Available
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Infrared
dmidecode: External Connector Type: Infrared
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x000E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Available
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Parallel
dmidecode: External Connector Type: DB-25 female
dmidecode: Port Type: Parallel Port ECP/EPP
dmidecode:
dmidecode: Handle 0x000F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Available
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: External Monitor
dmidecode: External Connector Type: DB-15 female
dmidecode: Port Type: Video Port
dmidecode:
dmidecode: Handle 0x0010, DMI type 126, 9 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0011, DMI type 126, 9 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0012, DMI type 126, 9 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0013, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Available
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Line-In Jack
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0014, DMI type 126, 9 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0015, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Available
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Microphone Jack
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0016, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Available
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Headphone Jack
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0017, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Available
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Modem
dmidecode: External Connector Type: RJ-11
dmidecode: Port Type: Modem Port
dmidecode:
dmidecode: Handle 0x0018, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Available
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Ethernet
dmidecode: External Connector Type: RJ-45
dmidecode: Port Type: Network Port
dmidecode:
dmidecode: Handle 0x0019, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Available
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB 1
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x001A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Available
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB 2
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x001B, DMI type 126, 9 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x001C, DMI type 126, 9 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x001D, DMI type 126, 9 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x001E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Available
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: IEEE1394
dmidecode: External Connector Type: IEEE 1394
dmidecode: Port Type: Firewire (IEEE P1394)
dmidecode:
dmidecode: Handle 0x001F, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: CardBus Slot 1
dmidecode: Type: 32-bit PC Card (PCMCIA)
dmidecode: Current Usage: Available
dmidecode: Length: Other
dmidecode: ID: Adapter 0, Socket 0
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: 3.3 V is provided
dmidecode: PC Card-16 is supported
dmidecode: Cardbus is supported
dmidecode: Zoom Video is supported
dmidecode: Modem ring resume is supported
dmidecode: PME signal is supported
dmidecode: Hot-plug devices are supported
dmidecode:
dmidecode: Handle 0x0020, DMI type 126, 13 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0021, DMI type 126, 13 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0022, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: Compact Flash Slot 1
dmidecode: Type: 32-bit Other
dmidecode: Current Usage: Available
dmidecode: Length: Other
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode: Hot-plug devices are supported
dmidecode:
dmidecode: Handle 0x0023, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: Mini-PCI Slot 1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Other
dmidecode: ID: 1
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode: SMBus signal is supported
dmidecode:
dmidecode: Handle 0x0024, DMI type 126, 13 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0025, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Other
dmidecode: Status: Disabled
dmidecode: Description: IBM Embedded Security hardware
dmidecode:
dmidecode: Handle 0x0026, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: String 1: IBM ThinkPad Embedded Controller -[1QHT16WW-1.03 ]-
dmidecode:
dmidecode: Handle 0x0027, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 1
dmidecode: enUS
dmidecode: Currently Installed Language: enUS
dmidecode:
dmidecode: Handle 0x0028, DMI type 15, 25 bytes
dmidecode: System Event Log
dmidecode: Area Length: 32 bytes
dmidecode: Header Start Offset: 0x0000
dmidecode: Header Length: 16 bytes
dmidecode: Data Start Offset: 0x0010
dmidecode: Access Method: General-purpose non-volatile data functions
dmidecode: Access Address: 0x0000
dmidecode: Status: Invalid, Invalid
dmidecode: Change Token: 0x00000020
dmidecode: Header Format: Type 1
dmidecode: Supported Log Type Descriptors: 1
dmidecode: Descriptor 1: POST error
dmidecode: Data Format 1: POST results bitmap
dmidecode:
dmidecode: Handle 0x0029, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: None
dmidecode: Maximum Capacity: 1 GB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 2
dmidecode:
dmidecode: Handle 0x002A, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0029
dmidecode: Error Information Handle: No Error
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: SODIMM
dmidecode: Set: None
dmidecode: Locator: DIMM 1
dmidecode: Bank Locator: Bank 0/1
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Not Specified
dmidecode: Serial Number: Not Specified
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: Not Specified
dmidecode:
dmidecode: Handle 0x002B, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0029
dmidecode: Error Information Handle: No Error
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: SODIMM
dmidecode: Set: None
dmidecode: Locator: DIMM 2
dmidecode: Bank Locator: Bank 2/3
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Not Specified
dmidecode: Serial Number: Not Specified
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: Not Specified
dmidecode:
dmidecode: Handle 0x002C, DMI type 18, 23 bytes
dmidecode: 32-bit Memory Error Information
dmidecode: Type: OK
dmidecode: Granularity: Unknown
dmidecode: Operation: Unknown
dmidecode: Vendor Syndrome: Unknown
dmidecode: Memory Array Address: Unknown
dmidecode: Device Address: Unknown
dmidecode: Resolution: Unknown
dmidecode:
dmidecode: Handle 0x002D, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Array Handle: 0x0029
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x002E, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x002A
dmidecode: Memory Array Mapped Address Handle: 0x002D
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x002F, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0030, DMI type 21, 7 bytes
dmidecode: Built-in Pointing Device
dmidecode: Type: Track Point
dmidecode: Interface: PS/2
dmidecode: Buttons: 3
dmidecode:
dmidecode: Handle 0x0031, DMI type 126, 7 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0032, DMI type 24, 5 bytes
dmidecode: Hardware Security
dmidecode: Power-On Password Status: Disabled
dmidecode: Keyboard Password Status: Disabled
dmidecode: Administrator Password Status: Disabled
dmidecode: Front Panel Reset Status: Unknown
dmidecode:
dmidecode: Handle 0x0033, DMI type 32, 11 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x0034, DMI type 131, 102 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: 83 66 34 00 01 00 00 00 00 01 72 03 40 00 AE 80
dmidecode: 00 02 00 00 00 00 00 2A 00 40 2A 00 00 00 00 00
dmidecode: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dmidecode: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dmidecode: 00 00 00 00 00 00 00 00 00 00 16 00 80 16 00 00
dmidecode: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dmidecode: 00 00 00 00 00 00
dmidecode: Strings:
dmidecode: IBMCFGDATA
dmidecode:
dmidecode: Handle 0x0035, DMI type 131, 17 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: 83 11 35 00 01 02 03 FF FF 1F 00 00 00 00 00 02
dmidecode: 00
dmidecode: Strings:
dmidecode: BOOTINF 20h
dmidecode: BOOTDEV 21h
dmidecode: KEYPTRS 23h
dmidecode:
dmidecode: Handle 0x0036, DMI type 132, 7 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: 84 07 36 00 01 D8 36
dmidecode:
dmidecode: Handle 0x0037, DMI type 133, 5 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: 85 05 37 00 01
dmidecode: Strings:
dmidecode: KHOIHGIUCCHHII
dmidecode:
dmidecode: Handle 0x0038, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: preseed-common
Status: install ok unpacked
Version: 1.17
Depends: di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.21
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6-16
Description: GNU C Library: NSS helper for DNS - udeb
Package: download-installer
Status: install ok installed
Version: 1.11
Depends: net-retriever, anna (>= 1.07)
Description: Download installer components
Installer-Menu-Item: 23
Package: floppy-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: floppy-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Floppy driver
Package: lowmemcheck
Status: install ok unpacked
Version: 1.19
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: main-menu
Status: install ok unpacked
Version: 1.13
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.42), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.32
Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.32
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.42), cdebconf-udeb (>= 0.97)
Description: Miscellaneous utilities for the debian installer
Package: choose-mirror
Status: install ok installed
Version: 2.04
Depends: configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23
Package: network-preseed
Status: install ok unpacked
Version: 1.17
Depends: configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: serial-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: serial-modules
Depends: kernel-image-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Description: Serial drivers
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.104+b1
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.33
Depends: di-utils (>= 1.24)
Description: Skeleton root filesystem used by debian-installer
Package: pcmcia-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: pcmcia-modules
Depends: kernel-image-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Description: Common PCMCIA drivers
Package: udev-udeb
Status: install ok unpacked
Version: 0.093-1
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: scsi-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-core-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Core SCSI subsystem
Package: firewire-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.16-2-486-di, kernel-image-2.6.16-2-486-di
Description: Core FireWire drivers
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-3.1
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-3
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: usb-discover
Status: install ok unpacked
Version: 1.05
Description: Discover USB and load kernel modules
Package: crc-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: crc-modules
Depends: kernel-image-2.6.16-2-486-di
Description: CRC modules
Package: rescue-check
Status: install ok unpacked
Version: 1.4
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.3.12-2
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.1-1)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.104+b1
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.43), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: nic-pcmcia-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: nic-pcmcia-modules
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, nic-extra-modules-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Description: Common PCMCIA NIC drivers
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: nic-shared-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: nic-shared-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Shared NIC drivers
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.104+b1
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: iso-3166-udeb
Status: install ok installed
Version: 0.52-1
Description: provides iso_3166.tab file
Package: fat-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: fat-modules
Depends: kernel-image-2.6.16-2-486-di
Description: FAT filesystem support
Package: floppy-retriever
Status: install ok unpacked
Version: 1.09
Provides: retriever
Depends: mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.39
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-2
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.17
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: net-retriever
Status: install ok installed
Version: 1.11
Provides: retriever
Depends: choose-mirror, configured-network, di-utils (>= 1.16)
Description: Fetch modules from the Internet
Package: fb-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: fb-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Frame buffer support
Package: save-logs
Status: install ok unpacked
Version: 2.17
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.32
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.24
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: kernel-image-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.0.0-7
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: choose-mirror-bin
Status: install ok installed
Version: 2.04
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-2
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.1-2
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.0-2
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: input-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: input-modules
Depends: kernel-image-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: Input devices support
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.32
Description: Terminfo entries needed by newt/slang in debian installer
Package: kbd-chooser
Status: install ok installed
Version: 1.29
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.43
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: acpi-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: acpi-modules
Depends: kernel-image-2.6.16-2-486-di
Description: ACPI support modules
Package: firmware-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: firmware-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Firmware request modules
Package: nic-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: nic-modules
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di, firewire-core-modules-2.6.16-2-486-di
Description: Common NIC drivers
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.17
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.6
Depends: di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.104
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.28
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: nic-extra-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: nic-extra-modules
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di, crc-modules-2.6.16-2-486-di
Description: Rare NIC drivers
Package: usb-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-modules
Depends: kernel-image-2.6.16-2-486-di
Description: USB support
Package: usb-serial-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-serial-modules
Depends: kernel-image-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: USB serial drivers
Package: dhcp-client-udeb
Status: install ok installed
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.104+b1
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.4
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: debian-installer
Status: install ok installed
Version: netboot-2.6-20060729
Description: debian installation image
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: choose-mirror-bin
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: apt-mirror-setup, base-installer (>= 1.49)
Description: Configure apt
Installer-Menu-Item: 70
Package: archdetect
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.43)
Description: Hardware architecture detector
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.64
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: cdebconf-newt-entropy
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.4
Depends: cdebconf-newt-udeb, libc6 (>= 2.3.6-6), libnewt0.52
Description: cdebconf newt plugin for reading from /dev/random
cdebconf plugin to facilitate reading random data from /dev/random.
Asks the user to enter random characters on the keyboard and shows a
progressbar with percent-of-data read.
Package: cdrom-core-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, ide-modules-2.6.16-2-486-di
Provides: cdrom-core-modules
Description: CDROM support
This package contains core CDROM support for the Linux kernel.
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: os-prober, tzsetup-udeb, mounted-partitions
Description: set up clock
Installer-Menu-Item: 62
Package: crypto-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: crypto-modules
Description: crypto modules
This package contains crypto modules.
Package: cryptsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 400
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Version: 2:1.0.3-3
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2), libpopt0-udeb (>= 1.10), libuuid1-udeb, dmsetup-udeb
Description: configures encrypted block devices
Since kernel 2.6.4, encrypted filesystem support is provided by the device
mapper target dm-crypt. This utility provides a command-line interface for
configuring this facility. It has integrated support for LUKS.
.
cryptsetup is backwards compatible with the on-disk format of cryptoloop,
but also supports more secure formats. This package also includes support
for automatically configuring encrypted devices at boot time via the config
file /etc/crypttab. When combined with newer versions of the debian
initrd-tools and standard debian kernels, cryptoroot is also supported.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp3-client-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 416
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 3.0.4-6
Depends: libc6 (>= 2.3.6-6)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.32
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.42)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: dmsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.07-1
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Kernel Device Mapper userspace library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
.
This package contains a utility for modifying device mappings.
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 352
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 88
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.6
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, firmware-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
This udeb will install elilo on the hard disk.
Installer-Menu-Item: 76
Package: ext3-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 140
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-10
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.4
Depends: archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: gnupg-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 668
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.5-1
Depends: libc6 (>= 2.3.6-6), libusb-0.1-udeb (>= 2:0.1.12), zlib1g-udeb (>= 1:1.2.1)
Description: GNU privacy guard - a free PGP replacement
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG packaged in minimal form for use in debian-installer.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: hw-detect
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 252
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: ide-core-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 148
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: ide-core-modules
Description: IDE support
This package contains core IDE support for the Linux kernel.
Package: ide-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 420
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, ide-core-modules-2.6.16-2-486-di
Provides: ide-modules
Description: IDE drivers
This package contains IDE drivers for the Linux kernel.
Package: jfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1524
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6-18
Provides: libc6, libc-udeb, glibc-2.3.6-2, glibc-2.3.5-3
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.07-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 328
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libpopt0-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Paul Martin <pm@debian.org>
Version: 1.10-2
Depends: libc6 (>= 2.3.6-6)
Description: lib for parsing cmdline parameters
Popt was heavily influenced by the getopt() and getopt_long() functions,
but it allows more powerful argument expansion. It can parse arbitrary
argv[] style arrays and automatically set variables based on command
line arguments. It also allows command line arguments to be aliased via
configuration files and includes utility functions for parsing arbitrary
strings into argv[] arrays using shell-like rules.
.
This package contains the runtime library and locale data.
.
This is a minimal package for use in debian-installer.
Package: libusb-0.1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Aurelien Jarno <aurel32@debian.org>
Version: 2:0.1.12-2
Depends: libc6 (>= 2.3.5-1)
Provides: libusb-0.1-4
Description: userspace USB programming library
Library for programming USB applications without the knowledge
of Linux kernel internals.
.
More information can be found at the Linux USB web site
http://www.linux-usb.org/ .
.
This is a minimal package for use in debian-installer.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 20
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 204
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-aes-2.6.16-2-486-di
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 148
Maintainer: Max Vozeler <xam@debian.org>
Version: 3.1d+3+3
Depends: kernel-image-2.6.16-2-486-di, mount-aes-udeb (>= 2.12p-1)
Provides: loop-aes-modules
Description: loop-AES encryption modules for kernel 2.6.16-2-486-di
This package contains the loop-AES loadable Linux kernel modules
compiled for kernel 2.6.16-2-486-di
.
loop-AES can be used to encrypt disk partitions, removable media,
swap space and other devices. It provides measures to strengthen
the encryption: Passphrase seeds, multiple hash iterations, MD5 IV
and use of alternating encryption keys.
.
Encryption keys can be stored in a GnuPG-encrypted keyfile, which
allows the passphrase to be changed without re-encryption. Keyfiles
can also be encrypted asymmetrically for multi-user access.
.
This package includes the cipher modules blowfish, twofish and
serpent in addition to the default cipher (AES).
.
If you compiled a custom kernel, you will most likely need to
compile a custom version of these modules as well. The package
loop-aes-source has been provided for this purpose.
Package: loop-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 396
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-2
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 140
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.2-10
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD device arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
devices (software RAID), as well as multipath devices.
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb, partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-3
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: mount-aes-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 216
Maintainer: Max Vozeler <xam@debian.org>
Version: 2.12r-13
Depends: libblkid1-udeb (>= 1.37-1), libc6 (>= 2.3.6-6), libuuid1-udeb
Description: Mount utils for loop-AES
loop-AES patched mount, losetup and swapon
Package: nic-usb-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David MartÃnez Moreno <ender@debian.org>
Version: 1.13.1-3
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: parport-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 116
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: parport-modules
Description: Parallel port support
This package contains parallel port drivers for the Linux kernel.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 60
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 656
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 54
Depends: di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base (>= 73), partman-auto (>= 51), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 836
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 92
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 564
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 692
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-base (>= 87), partman-crypto-dm, partman-crypto-loop, cdebconf-newt-entropy (>= 0.3), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-crypto-dm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-crypto, crypto-modules, cryptsetup-udeb
Description: Add to partman support for dm-crypt encryption
Package: partman-crypto-loop
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-crypto, loop-aes-modules, mount-aes-udeb, gnupg-udeb
Description: Add to partman support for loop-AES encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 10
Depends: partman-base
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 41
Depends: e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 252
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 616
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 45
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 40
Depends: ntfstools-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Depends: mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-storage-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, ide-core-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Provides: pcmcia-storage-modules
Description: PCMCIA storage drivers
This package contains PCMCIA storage drivers for the Linux kernel.
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.07.1
Depends: apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: sata-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 344
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di
Provides: sata-modules
Description: SATA drivers
This package contains SATA drivers for the Linux kernel.
Package: scsi-common-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 704
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di
Provides: scsi-common-modules
Description: Very common SCSI drivers
This package contains very common SCSI drivers for the Linux kernel.
Package: scsi-extra-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: scsi-modules-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: scsi-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1112
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, parport-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Provides: scsi-modules
Description: SCSI drivers
This package contains SCSI drivers for the Linux kernel.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.10
Depends: localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: usb-storage-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: ide-core-modules-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Provides: usb-storage-modules
Description: USB storage support
This package contains the USB storage driver for the Linux kernel.
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.4
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: xfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 580
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.10-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This minimal package includes the shared library
for use with the Debian installer.
Package: ntfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-2-686
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii reportbug 3.21.2 reports bugs in the Debian distrib
-- no debconf information
--- End Message ---