--- Begin Message ---
Subject: installation-report: installtion successful
Package: installation-reports
Version: 2.17
Severity: normal
*** Please type your report below this line ***
-- Package-specific info:
Boot method: floppy
Image version: http://www-timc.imag.fr/Sylvain.Ferriol/debian/d-i/i386
Date: <Date and time of the install>
Machine: Seanix with SATA and Intel PRO/100
Partitions: <df -Tl will do; the raw partition table is preferred>
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sda1 ext3 255912 76515 165744 32% /
tmpfs tmpfs 253748 0 253748 0% /dev/shm
/dev/sda9 ext3 67108340 131936 63567416 1% /home
/dev/sda8 ext3 369000 8348 340992 3% /tmp
/dev/sda5 ext3 4807056 1538328 3024544 34% /usr
/dev/sda6 ext3 2885780 697400 2041792 26% /var
tmpfs tmpfs 10240 108 10132 2% /dev
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
Solves all problems with SATA recongnition and Intel PRO/100 NIC
configuration. These were both problems with the sarge installer as well
as testing images at http://people.debian.org/~joeyh/d-i/images/daily as
of Jul 26, 06.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20060706)"
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux cscidemo 2.6.16-2-486 #2 Mon May 22 23:02:27 UTC 2006 i686 unknown
lspci -v -t: -[0000:00]-+-00.0 Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub
lspci -v -t: +-02.0 Intel Corporation 945G/GZ Express Integrated Graphics Controller
lspci -v -t: +-1b.0 Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller
lspci -v -t: +-1c.0-[0000:01]--
lspci -v -t: +-1c.2-[0000:02]--
lspci -v -t: +-1c.3-[0000:03]--
lspci -v -t: +-1d.0 Intel Corporation 82801G (ICH7 Family) USB UHCI #1
lspci -v -t: +-1d.1 Intel Corporation 82801G (ICH7 Family) USB UHCI #2
lspci -v -t: +-1d.2 Intel Corporation 82801G (ICH7 Family) USB UHCI #3
lspci -v -t: +-1d.3 Intel Corporation 82801G (ICH7 Family) USB UHCI #4
lspci -v -t: +-1d.7 Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller
lspci -v -t: +-1e.0-[0000:04]--+-05.0 Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
lspci -v -t: | \-08.0 Intel Corporation 82801G (ICH7 Family) LAN Controller
lspci -v -t: +-1f.0 Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge
lspci -v -t: +-1f.2 Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE
lspci -v -t: \-1f.3 Intel Corporation 82801G (ICH7 Family) SMBus Controller
lspci -n: 00:00.0 0600: 8086:2770 (rev 02)
lspci -n: 00:02.0 0300: 8086:2772 (rev 02)
lspci -n: 00:1b.0 0403: 8086:27d8 (rev 01)
lspci -n: 00:1c.0 0604: 8086:27d0 (rev 01)
lspci -n: 00:1c.2 0604: 8086:27d4 (rev 01)
lspci -n: 00:1c.3 0604: 8086:27d6 (rev 01)
lspci -n: 00:1d.0 0c03: 8086:27c8 (rev 01)
lspci -n: 00:1d.1 0c03: 8086:27c9 (rev 01)
lspci -n: 00:1d.2 0c03: 8086:27ca (rev 01)
lspci -n: 00:1d.3 0c03: 8086:27cb (rev 01)
lspci -n: 00:1d.7 0c03: 8086:27cc (rev 01)
lspci -n: 00:1e.0 0604: 8086:244e (rev e1)
lspci -n: 00:1f.0 0601: 8086:27b8 (rev 01)
lspci -n: 00:1f.2 0101: 8086:27c0 (rev 01)
lspci -n: 00:1f.3 0c05: 8086:27da (rev 01)
lspci -n: 04:05.0 0c00: 104c:8024
lspci -n: 04:08.0 0200: 8086:27dc (rev 01)
lspci -v: 00:00.0 Host bridge: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub (rev 02)
lspci -v: Subsystem: Intel Corporation Unknown device 544e
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Capabilities: [e0] Vendor Specific Information
lspci -v:
lspci -v: 00:02.0 VGA compatible controller: Intel Corporation 945G/GZ Express Integrated Graphics Controller (rev 02)
lspci -v: Subsystem: Intel Corporation Unknown device 544e
lspci -v: Flags: bus master, fast devsel, latency 0, IRQ 11
lspci -v: Memory at 30100000 (32-bit, non-prefetchable) [size=512K]
lspci -v: I/O ports at 20e0 [size=8]
lspci -v: Memory at 20000000 (32-bit, prefetchable) [size=256M]
lspci -v: Memory at 30180000 (32-bit, non-prefetchable) [size=256K]
lspci -v: Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
lspci -v: Capabilities: [d0] Power Management version 2
lspci -v:
lspci -v: 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
lspci -v: Subsystem: Intel Corporation Unknown device 0606
lspci -v: Flags: bus master, fast devsel, latency 0, IRQ 9
lspci -v: Memory at 301c0000 (64-bit, non-prefetchable) [size=16K]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v: Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
lspci -v: Capabilities: [70] Express Unknown type IRQ 0
lspci -v: Capabilities: [100] Virtual Channel
lspci -v: Capabilities: [130] Unknown (5)
lspci -v:
lspci -v: 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
lspci -v: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
lspci -v: Capabilities: [90] #0d [0000]
lspci -v: Capabilities: [a0] Power Management version 2
lspci -v: Capabilities: [100] Virtual Channel
lspci -v: Capabilities: [180] Unknown (5)
lspci -v:
lspci -v: 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
lspci -v: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
lspci -v: Capabilities: [90] #0d [0000]
lspci -v: Capabilities: [a0] Power Management version 2
lspci -v: Capabilities: [100] Virtual Channel
lspci -v: Capabilities: [180] Unknown (5)
lspci -v:
lspci -v: 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
lspci -v: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
lspci -v: Capabilities: [90] #0d [0000]
lspci -v: Capabilities: [a0] Power Management version 2
lspci -v: Capabilities: [100] Virtual Channel
lspci -v: Capabilities: [180] Unknown (5)
lspci -v:
lspci -v: 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
lspci -v: Subsystem: Intel Corporation Unknown device 544e
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 233
lspci -v: I/O ports at 2080 [size=32]
lspci -v:
lspci -v: 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
lspci -v: Subsystem: Intel Corporation Unknown device 544e
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 185
lspci -v: I/O ports at 2060 [size=32]
lspci -v:
lspci -v: 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
lspci -v: Subsystem: Intel Corporation Unknown device 544e
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 177
lspci -v: I/O ports at 2040 [size=32]
lspci -v:
lspci -v: 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
lspci -v: Subsystem: Intel Corporation Unknown device 544e
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 50
lspci -v: I/O ports at 2020 [size=32]
lspci -v:
lspci -v: 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20)
lspci -v: Subsystem: Intel Corporation Unknown device 544e
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 233
lspci -v: Memory at 301c4000 (32-bit, non-prefetchable) [size=1K]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v: Capabilities: [58] Debug port
lspci -v:
lspci -v: 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
lspci -v: I/O behind bridge: 00001000-00001fff
lspci -v: Memory behind bridge: 30000000-300fffff
lspci -v: Capabilities: [50] #0d [0000]
lspci -v:
lspci -v: 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
lspci -v: Subsystem: Intel Corporation Unknown device 544e
lspci -v: Flags: bus master, medium devsel, latency 0
lspci -v: Capabilities: [e0] Vendor Specific Information
lspci -v:
lspci -v: 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) (prog-if 80 [Master])
lspci -v: Subsystem: Intel Corporation Unknown device 544e
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 185
lspci -v: I/O ports at <unassigned>
lspci -v: I/O ports at <unassigned>
lspci -v: I/O ports at <unassigned>
lspci -v: I/O ports at <unassigned>
lspci -v: I/O ports at 20a0 [size=16]
lspci -v: Capabilities: [70] Power Management version 2
lspci -v:
lspci -v: 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
lspci -v: Subsystem: Intel Corporation Unknown device 544e
lspci -v: Flags: medium devsel, IRQ 11
lspci -v: I/O ports at 2000 [size=32]
lspci -v:
lspci -v: 04:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10)
lspci -v: Subsystem: Intel Corporation Unknown device 544e
lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 169
lspci -v: Memory at 30005000 (32-bit, non-prefetchable) [size=2K]
lspci -v: Memory at 30000000 (32-bit, non-prefetchable) [size=16K]
lspci -v: Capabilities: [44] Power Management version 2
lspci -v:
lspci -v: 04:08.0 Ethernet controller: Intel Corporation 82801G (ICH7 Family) LAN Controller (rev 01)
lspci -v: Subsystem: Intel Corporation Unknown device 308d
lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 225
lspci -v: Memory at 30004000 (32-bit, non-prefetchable) [size=4K]
lspci -v: I/O ports at 1000 [size=64]
lspci -v: Capabilities: [dc] Power Management version 2
lspci -v:
lspci -x: 00:00.0 Host bridge: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub (rev 02)
lspci -x: 00: 86 80 70 27 06 00 90 20 02 00 00 06 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 4e 54
lspci -x: 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:02.0 VGA compatible controller: Intel Corporation 945G/GZ Express Integrated Graphics Controller (rev 02)
lspci -x: 00: 86 80 72 27 07 00 90 00 02 00 00 03 00 00 00 00
lspci -x: 10: 00 00 10 30 e1 20 00 00 08 00 00 20 00 00 18 30
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 4e 54
lspci -x: 30: 00 00 00 00 90 00 00 00 00 00 00 00 0b 01 00 00
lspci -x:
lspci -x: 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
lspci -x: 00: 86 80 d8 27 06 00 10 00 01 00 03 04 10 00 00 00
lspci -x: 10: 04 00 1c 30 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 06 06
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 09 01 00 00
lspci -x:
lspci -x: 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
lspci -x: 00: 86 80 d0 27 07 04 10 00 01 00 04 06 10 00 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 20
lspci -x: 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 04 00
lspci -x:
lspci -x: 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01)
lspci -x: 00: 86 80 d4 27 07 04 10 00 01 00 04 06 10 00 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 02 02 00 f0 00 00 20
lspci -x: 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 03 04 00
lspci -x:
lspci -x: 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
lspci -x: 00: 86 80 d6 27 07 04 10 00 01 00 04 06 10 00 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 03 03 00 f0 00 00 20
lspci -x: 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 04 04 00
lspci -x:
lspci -x: 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
lspci -x: 00: 86 80 c8 27 05 00 80 02 01 00 03 0c 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 81 20 00 00 00 00 00 00 00 00 00 00 86 80 4e 54
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
lspci -x:
lspci -x: 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
lspci -x: 00: 86 80 c9 27 05 00 80 02 01 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 61 20 00 00 00 00 00 00 00 00 00 00 86 80 4e 54
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
lspci -x:
lspci -x: 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
lspci -x: 00: 86 80 ca 27 05 00 80 02 01 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 41 20 00 00 00 00 00 00 00 00 00 00 86 80 4e 54
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 03 00 00
lspci -x:
lspci -x: 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
lspci -x: 00: 86 80 cb 27 05 00 80 02 01 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 21 20 00 00 00 00 00 00 00 00 00 00 86 80 4e 54
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00
lspci -x:
lspci -x: 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
lspci -x: 00: 86 80 cc 27 06 00 90 02 01 20 03 0c 00 00 00 00
lspci -x: 10: 00 40 1c 30 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 4e 54
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
lspci -x:
lspci -x: 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
lspci -x: 00: 86 80 4e 24 07 00 10 00 e1 01 04 06 00 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 04 04 20 10 10 80 22
lspci -x: 20: 00 30 00 30 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 04 00
lspci -x:
lspci -x: 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
lspci -x: 00: 86 80 b8 27 07 00 10 02 01 00 01 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 4e 54
lspci -x: 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01)
lspci -x: 00: 86 80 c0 27 05 00 b0 02 01 80 01 01 00 00 00 00
lspci -x: 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
lspci -x: 20: a1 20 00 00 00 00 00 00 00 00 00 00 86 80 4e 54
lspci -x: 30: 00 00 00 00 70 00 00 00 00 00 00 00 0b 02 00 00
lspci -x:
lspci -x: 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
lspci -x: 00: 86 80 da 27 01 00 80 02 01 00 05 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 01 20 00 00 00 00 00 00 00 00 00 00 86 80 4e 54
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
lspci -x:
lspci -x: 04:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
lspci -x: 00: 4c 10 24 80 16 00 10 02 00 10 00 0c 10 20 00 00
lspci -x: 10: 00 50 00 30 00 00 00 30 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 4e 54
lspci -x: 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 02 04
lspci -x:
lspci -x: 04:08.0 Ethernet controller: Intel Corporation 82801G (ICH7 Family) LAN Controller (rev 01)
lspci -x: 00: 86 80 dc 27 17 00 90 02 01 00 00 02 10 20 00 00
lspci -x: 10: 00 40 00 30 01 10 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 8d 30
lspci -x: 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 08 38
lspci -x:
lsmod: Module Size Used by
lsmod: qnx4 10612 0
lsmod: ntfs 189580 0
lsmod: xfs 483476 0
lsmod: exportfs 5248 1 xfs
lsmod: reiserfs 218352 0
lsmod: jfs 158556 0
lsmod: ext3 115976 5
lsmod: jbd 46996 1 ext3
lsmod: vfat 11520 0
lsmod: fat 46876 1 vfat
lsmod: isofs 32192 0
lsmod: ide_cd 35488 0
lsmod: cdrom 32176 1 ide_cd
lsmod: ide_disk 14976 0
lsmod: ide_generic 1408 0 [permanent]
lsmod: aec62xx 6784 0 [permanent]
lsmod: alim15x3 11024 0 [permanent]
lsmod: amd74xx 12956 0 [permanent]
lsmod: atiixp 5392 0 [permanent]
lsmod: cmd64x 10012 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7812 0 [permanent]
lsmod: ns87415 4268 0 [permanent]
lsmod: opti621 4100 0 [permanent]
lsmod: pdc202xx_new 8064 0 [permanent]
lsmod: pdc202xx_old 9600 0 [permanent]
lsmod: piix 9092 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6656 0 [permanent]
lsmod: serverworks 8328 0 [permanent]
lsmod: siimage 11008 0 [permanent]
lsmod: sis5513 12300 0 [permanent]
lsmod: slc90e66 5120 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 4100 0 [permanent]
lsmod: via82cxxx 8196 0 [permanent]
lsmod: usb_storage 69696 0
lsmod: sd_mod 16528 7
lsmod: generic 4356 0 [permanent]
lsmod: ide_core 111280 30 ide_cd,ide_disk,ide_generic,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_new,pdc202xx_old,piix,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,generic
lsmod: ehci_hcd 27144 0
lsmod: uhci_hcd 27152 0
lsmod: ata_piix 9988 6
lsmod: usbcore 111008 4 usb_storage,ehci_hcd,uhci_hcd
lsmod: libata 52752 1 ata_piix
lsmod: rsrc_nonstatic 12160 0
lsmod: pcmcia_core 37392 1 rsrc_nonstatic
lsmod: eth1394 18180 0
lsmod: sbp2 19460 0
lsmod: scsi_mod 122444 4 usb_storage,sd_mod,libata,sbp2
lsmod: ohci1394 29488 0
lsmod: ieee1394 85816 3 eth1394,sbp2,ohci1394
lsmod: e100 31876 0
lsmod: mii 5248 1 e100
lsmod: parport_pc 31728 0
lsmod: parport 31944 1 parport_pc
lsmod: vga16fb 11272 2
lsmod: vgastate 7552 1 vga16fb
lsmod: thermal 12936 0
lsmod: processor 21184 1 thermal
lsmod: fan 4484 0
lsmod: floppy 55596 0
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 102400 33840 68560 33% /
df: tmpfs 253704 436 253268 0% /dev
df: tmpfs 253704 436 253268 0% /dev
df: tmpfs 253704 436 253268 0% /.dev
df: /dev/scsi/host1/bus0/target0/lun0/part1 255912 76514 165745 32% /target
df: /dev/scsi/host1/bus0/target0/lun0/part9 67108340 131276 63568076 0% /target/home
df: /dev/scsi/host1/bus0/target0/lun0/part8 369000 8240 341100 2% /target/tmp
df: /dev/scsi/host1/bus0/target0/lun0/part5 4807056 1538328 3024544 34% /target/usr
df: /dev/scsi/host1/bus0/target0/lun0/part6 2885780 689700 2049492 25% /target/var
free: total used free shared buffers
free: Mem: 507412 476920 30492 0 47840
free: Swap: 1485972 23988 1461984
free: Total: 1993384 500908 1492476
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 34: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 35: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 6
/proc/cpuinfo: model name : Intel(R) Celeron(R) D CPU 3.20GHz
/proc/cpuinfo: stepping : 4
/proc/cpuinfo: cpu MHz : 3200.253
/proc/cpuinfo: cache size : 512 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 6
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl cid cx16 xtpr lahf_lm
/proc/cpuinfo: bogomips : 6406.77
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : libata
/proc/ioports: 01f0-01f7 : libata
/proc/ioports: 0378-037a : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0400-0403 : PM1a_EVT_BLK
/proc/ioports: 0404-0405 : PM1a_CNT_BLK
/proc/ioports: 0408-040b : PM_TMR
/proc/ioports: 0410-0415 : ACPI CPU throttle
/proc/ioports: 0420-0420 : PM2_CNT_BLK
/proc/ioports: 0428-042f : GPE0_BLK
/proc/ioports: 0500-053f : pnp 00:06
/proc/ioports: 0680-06ff : pnp 00:06
/proc/ioports: 0778-077a : parport0
/proc/ioports: 1000-1fff : PCI Bus #04
/proc/ioports: 1000-103f : 0000:04:08.0
/proc/ioports: 1000-103f : e100
/proc/ioports: 2000-201f : 0000:00:1f.3
/proc/ioports: 2020-203f : 0000:00:1d.3
/proc/ioports: 2020-203f : uhci_hcd
/proc/ioports: 2040-205f : 0000:00:1d.2
/proc/ioports: 2040-205f : uhci_hcd
/proc/ioports: 2060-207f : 0000:00:1d.1
/proc/ioports: 2060-207f : uhci_hcd
/proc/ioports: 2080-209f : 0000:00:1d.0
/proc/ioports: 2080-209f : uhci_hcd
/proc/ioports: 20a0-20af : 0000:00:1f.2
/proc/ioports: 20a0-20af : libata
/proc/ioports: 20e0-20e7 : 0000:00:02.0
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000cb000-000cc7ff : Adapter ROM
/proc/iomem: 000cc800-000cd7ff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-1f67bfff : System RAM
/proc/iomem: 00100000-00273102 : Kernel code
/proc/iomem: 00273103-00301c23 : Kernel data
/proc/iomem: 1f67c000-1f6e8fff : ACPI Non-volatile Storage
/proc/iomem: 1f6e9000-1f6ebfff : System RAM
/proc/iomem: 1f6ec000-1f6fefff : ACPI Tables
/proc/iomem: 1f6ff000-1f6fffff : System RAM
/proc/iomem: 20000000-2fffffff : 0000:00:02.0
/proc/iomem: 30000000-300fffff : PCI Bus #04
/proc/iomem: 30000000-30003fff : 0000:04:05.0
/proc/iomem: 30004000-30004fff : 0000:04:08.0
/proc/iomem: 30004000-30004fff : e100
/proc/iomem: 30005000-300057ff : 0000:04:05.0
/proc/iomem: 30005000-300057ff : ohci1394
/proc/iomem: 30100000-3017ffff : 0000:00:02.0
/proc/iomem: 30180000-301bffff : 0000:00:02.0
/proc/iomem: 301c0000-301c3fff : 0000:00:1b.0
/proc/iomem: 301c4000-301c43ff : 0000:00:1d.7
/proc/iomem: 301c4000-301c43ff : ehci_hcd
/proc/interrupts: CPU0
/proc/interrupts: 0: 773569 IO-APIC-edge timer
/proc/interrupts: 1: 1052 IO-APIC-edge i8042
/proc/interrupts: 7: 0 IO-APIC-edge parport0
/proc/interrupts: 9: 0 IO-APIC-level acpi
/proc/interrupts: 14: 4 IO-APIC-edge libata
/proc/interrupts: 15: 96963 IO-APIC-edge libata
/proc/interrupts: 50: 0 IO-APIC-level uhci_hcd:usb5
/proc/interrupts: 169: 3 IO-APIC-level ohci1394
/proc/interrupts: 177: 0 IO-APIC-level uhci_hcd:usb4
/proc/interrupts: 185: 0 IO-APIC-level uhci_hcd:usb3
/proc/interrupts: 225: 530956 IO-APIC-level eth0
/proc/interrupts: 233: 0 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb2
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 773547
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 507412 kB
/proc/meminfo: MemFree: 30404 kB
/proc/meminfo: Buffers: 47840 kB
/proc/meminfo: Cached: 372564 kB
/proc/meminfo: SwapCached: 1432 kB
/proc/meminfo: Active: 229284 kB
/proc/meminfo: Inactive: 204008 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 507412 kB
/proc/meminfo: LowFree: 30404 kB
/proc/meminfo: SwapTotal: 1485972 kB
/proc/meminfo: SwapFree: 1462012 kB
/proc/meminfo: Dirty: 4304 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 13196 kB
/proc/meminfo: Slab: 35740 kB
/proc/meminfo: CommitLimit: 1739676 kB
/proc/meminfo: Committed_AS: 48596 kB
/proc/meminfo: PageTables: 224 kB
/proc/meminfo: VmallocTotal: 786128 kB
/proc/meminfo: VmallocUsed: 6672 kB
/proc/meminfo: VmallocChunk: 778464 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 29 structures occupying 1381 bytes.
dmidecode: Table at 0x000E4DC0.
dmidecode:
dmidecode: Handle 0x0000, DMI type 4, 35 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: J3E1
dmidecode: Type: Central Processor
dmidecode: Family: Celeron
dmidecode: Manufacturer: Intel(R) Corporation
dmidecode: ID: 64 0F 00 00 FF FB EB BF
dmidecode: Signature: Type 0, Family 15, Model 6, Stepping 4
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: CLFSH (CLFLUSH instruction supported)
dmidecode: DS (Debug store)
dmidecode: ACPI (ACPI supported)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: SSE2 (Streaming SIMD extensions 2)
dmidecode: SS (Self-snoop)
dmidecode: HTT (Hyper-threading technology)
dmidecode: TM (Thermal monitor supported)
dmidecode: PBE (Pending break enabled)
dmidecode: Version: Intel(R) Celeron(R) D CPU 3.20GHz
dmidecode: Voltage: 3.0 V
dmidecode: External Clock: 133 MHz
dmidecode: Max Speed: 4000 MHz
dmidecode: Current Speed: 3200 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: Other
dmidecode: L1 Cache Handle: 0x0001
dmidecode: L2 Cache Handle: 0x0002
dmidecode: L3 Cache Handle: Not Provided
dmidecode: Serial Number: Not Specified
dmidecode: Asset Tag: Unknown
dmidecode: Part Number: Not Specified
dmidecode:
dmidecode: Handle 0x0001, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Unknown
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 16 KB
dmidecode: Maximum Size: 16 KB
dmidecode: Supported SRAM Types:
dmidecode: Asynchronous
dmidecode: Installed SRAM Type: Asynchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Data
dmidecode: Associativity: 8-way Set-associative
dmidecode:
dmidecode: Handle 0x0002, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Unknown
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 512 KB
dmidecode: Maximum Size: 512 KB
dmidecode: Supported SRAM Types:
dmidecode: Asynchronous
dmidecode: Installed SRAM Type: Asynchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Unified
dmidecode: Associativity: 8-way Set-associative
dmidecode:
dmidecode: Handle 0x0003, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: Vendor: Intel Corp.
dmidecode: Version: NT94510J.86A.3813.2006.0411.1332
dmidecode: Release Date: 04/11/2006
dmidecode: Address: 0xF0000
dmidecode: Runtime Size: 64 kB
dmidecode: ROM Size: 512 kB
dmidecode: Characteristics:
dmidecode: PCI is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: EDD is supported
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: ATAPI Zip drive boot is supported
dmidecode: BIOS boot specification is supported
dmidecode: Function key-initiated network boot is supported
dmidecode:
dmidecode: Handle 0x0004, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer: Seanix Technology Inc.
dmidecode: Product Name:
dmidecode: Version:
dmidecode: Serial Number: 1247028
dmidecode: UUID: 65133E1A-CAA1-11DA-8F00-000EA68F7252
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0005, DMI type 2, 20 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: Intel Corporation
dmidecode: Product Name: D945GTP
dmidecode: Version: AAC97841-304
dmidecode: Serial Number: BQTP61509279
dmidecode: Asset Tag: Base Board Asset Tag
dmidecode: Features:
dmidecode: Board is a hosting board
dmidecode: Board is replaceable
dmidecode: Location In Chassis: Base Board Chassis Location
dmidecode: Chassis Handle: 0x0006
dmidecode: Type: Unknown
dmidecode: Contained Object Handles: 0
dmidecode:
dmidecode: Handle 0x0006, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: Seanix Technology Inc.
dmidecode: Type: Unknown
dmidecode: Lock: Not Present
dmidecode: Version:
dmidecode: Serial Number:
dmidecode: Asset Tag:
dmidecode: Boot-up State: Safe
dmidecode: Power Supply State: Safe
dmidecode: Thermal State: Other
dmidecode: Security Status: Other
dmidecode: OEM Information: 0x00000000
dmidecode:
dmidecode: Handle 0x0007, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PRIMARY
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0008, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SECONDARY
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0009, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: ATX_PWR
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x000A, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCIE X16 SLOT
dmidecode: Type: x16 PCI Express
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode:
dmidecode: Handle 0x000B, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCIE X1 SLOT 1
dmidecode: Type: x1 PCI Express
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode: SMBus signal is supported
dmidecode:
dmidecode: Handle 0x000C, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI SLOT 1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 1
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode: SMBus signal is supported
dmidecode:
dmidecode: Handle 0x000D, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI SLOT 2
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 2
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode: SMBus signal is supported
dmidecode:
dmidecode: Handle 0x000E, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Video
dmidecode: Status: Enabled
dmidecode: Description: Intel(R) Extreme Graphics 3 Controller
dmidecode:
dmidecode: Handle 0x000F, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Ethernet
dmidecode: Status: Enabled
dmidecode: Description: Intel (R) 82562 Ethernet Device
dmidecode:
dmidecode: Handle 0x0010, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Sound
dmidecode: Status: Enabled
dmidecode: Description: Intel(R) Azalia Audio Device
dmidecode:
dmidecode: Handle 0x0011, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 1
dmidecode: enUS
dmidecode: Currently Installed Language: enUS
dmidecode:
dmidecode: Handle 0x0012, DMI type 32, 20 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x0013, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: None
dmidecode: Maximum Capacity: 4 GB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 4
dmidecode:
dmidecode: Handle 0x0014, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0013
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: J6H1
dmidecode: Bank Locator: CHAN A DIMM 0
dmidecode: Type: DDR2
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 533 MHz (1.9 ns)
dmidecode: Manufacturer: 0x7F7A000000000000
dmidecode: Serial Number: 0xFFFFFFFF
dmidecode: Asset Tag: Unknown
dmidecode: Part Number: 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
dmidecode:
dmidecode: Handle 0x0015, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x0014
dmidecode: Memory Array Mapped Address Handle: 0x0019
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0016, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0013
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: J6H2
dmidecode: Bank Locator: CHAN A DIMM 1
dmidecode: Type: DDR2
dmidecode: Type Detail: None
dmidecode: Speed: Unknown
dmidecode: Manufacturer: NO DIMM
dmidecode: Serial Number: NO DIMM
dmidecode: Asset Tag: NO DIMM
dmidecode: Part Number: NO DIMM
dmidecode:
dmidecode: Handle 0x0017, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0013
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: J6J1
dmidecode: Bank Locator: CHAN B DIMM 0
dmidecode: Type: DDR2
dmidecode: Type Detail: None
dmidecode: Speed: Unknown
dmidecode: Manufacturer: NO DIMM
dmidecode: Serial Number: NO DIMM
dmidecode: Asset Tag: NO DIMM
dmidecode: Part Number: NO DIMM
dmidecode:
dmidecode: Handle 0x0018, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0013
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: J6J2
dmidecode: Bank Locator: CHAN B DIMM 1
dmidecode: Type: DDR2
dmidecode: Type Detail: None
dmidecode: Speed: Unknown
dmidecode: Manufacturer: NO DIMM
dmidecode: Serial Number: NO DIMM
dmidecode: Asset Tag: NO DIMM
dmidecode: Part Number: NO DIMM
dmidecode:
dmidecode: Handle 0x0019, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Array Handle: 0x0013
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x001A, DMI type 187, 9 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: BB 09 1A 00 14 00 03 15 02
dmidecode:
dmidecode: Handle 0x001B, DMI type 136, 6 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: 88 06 1B 00 5A 5A
dmidecode:
dmidecode: Handle 0xFFFD, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: preseed-common
Status: install ok unpacked
Version: 1.17
Depends: di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.19
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6-15
Description: GNU C Library: NSS helper for DNS - udeb
Package: download-installer
Status: install ok installed
Version: 1.10
Depends: net-retriever, anna (>= 1.07)
Description: Download installer components
Installer-Menu-Item: 23
Package: lowmemcheck
Status: install ok unpacked
Version: 1.18
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: console-keymaps-usb
Status: install ok installed
Version: 20060609
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for USB keyboards
Package: main-menu
Status: install ok unpacked
Version: 1.13
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.42), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.32
Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.32
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.42), cdebconf-udeb (>= 0.97)
Description: Miscellaneous utilities for the debian installer
Package: wireless-tools-udeb
Status: install ok unpacked
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
Package: choose-mirror
Status: install ok installed
Version: 2.03
Depends: configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.103
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: udev-udeb
Status: install ok unpacked
Version: 0.093-1
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: rescue-check
Status: install ok unpacked
Version: 1.4
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: iso-3166-udeb
Status: install ok installed
Version: 0.51-1.1
Description: provides iso_3166.tab file
Package: floppy-retriever
Status: install ok installed
Version: 1.08
Provides: retriever
Depends: mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.38
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-1
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.17
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: net-retriever
Status: install ok installed
Version: 1.10
Provides: retriever
Depends: choose-mirror, configured-network, di-utils (>= 1.16)
Description: Fetch modules from the Internet
Package: fb-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.31
Provides: fb-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Frame buffer support
Package: load-floppy
Status: install ok installed
Version: 1.09
Depends: floppy-retriever, anna
Description: Load installer components from a floppy
Installer-Menu-Item: 11
Package: save-logs
Status: install ok unpacked
Version: 2.17
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.32
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.24
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: choose-mirror-bin
Status: install ok installed
Version: 2.03
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.42), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.1-2
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 20060609
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.32
Description: Terminfo entries needed by newt/slang in debian installer
Package: kbd-chooser
Status: install ok installed
Version: 1.28
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.42), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.43
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: acpi-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.31
Provides: acpi-modules
Depends: kernel-image-2.6.16-2-486-di
Description: ACPI support modules
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.17
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok installed
Version: 0.6
Depends: di-utils (>= 1.15)
Description: Mounts a floppy
Package: netcfg
Status: install ok installed
Version: 1.27
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: dhcp-client-udeb
Status: install ok installed
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.103
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.4
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: debian-installer
Status: install ok installed
Version: floppy-root-2.6-20060706
Description: debian installation image
Package: crc-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.31
Depends: kernel-image-2.6.16-2-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: ipv6-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 288
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.31
Depends: kernel-image-2.6.16-2-486-di
Provides: ipv6-modules
Description: IPv6 driver
This package contains the IPv6 driver for the Linux kernel.
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: libsysfs2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 36
Maintainer: Martin Pitt <mpitt@debian.org>
Version: 2.0.0-7
Depends: libc6 (>= 2.3.6-6)
Provides: libsysfs2
Description: interface library to sysfs
Sysfs is a virtual file system in Linux kernel 2.5+ that provides a
tree of system devices. libsysfs provides a stable programming
interface to sysfs and eases querying system devices and their
attributes.
.
This is a minimal package for use in debian-installer.
Package: parport-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 116
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.31
Depends: kernel-image-2.6.16-2-486-di
Provides: parport-modules
Description: Parallel port support
This package contains parallel port drivers for the Linux kernel.
Package: pcmciautils-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 52
Maintainer: Colin Watson <cjwatson@debian.org>
Version: 013-2
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
This package provides PCMCIA initialisation tools for Linux 2.6.13-rc1 or
later, replacing the old pcmcia-cs tools used with earlier kernel versions.
PCMCIA cards are commonly used in laptops to provide expanded capabilities
such as network connections, modems, increased memory, etc.
.
To use PCMCIA you need to have kernel modules available to support it.
These are included in the stock Debian 2.6 kernel packages.
.
This is a minimal package for use in debian-installer.
Package: plip-modules-2.6.16-2-486-di
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.31
Depends: kernel-image-2.6.16-2-486-di, parport-modules-2.6.16-2-486-di
Provides: plip-modules
Description: PLIP drivers
This package contains PLIP drivers for the Linux kernel.
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: choose-mirror-bin
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: apt-mirror-setup, base-installer (>= 1.49)
Description: Configure apt
Installer-Menu-Item: 70
Package: archdetect
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.43)
Description: Hardware architecture detector
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.64
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: cdebconf-newt-entropy
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.4
Depends: cdebconf-newt-udeb, libc6 (>= 2.3.6-6), libnewt0.52
Description: cdebconf newt plugin for reading from /dev/random
cdebconf plugin to facilitate reading random data from /dev/random.
Asks the user to enter random characters on the keyboard and shows a
progressbar with percent-of-data read.
Package: cdebconf-priority
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.104
Depends: cdebconf-udeb
Description: Change debconf priority
This is a udeb that allows you to change the priority limit for the
questions.
Installer-Menu-Item: 930
Package: cdebconf-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 172
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.104+b1
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.43), libtextwrap1-udeb
Provides: debconf-2.0
Description: Debian Configuration Management System (C-implementation)
Debconf is a configuration management system for Debian packages. It is
used by some packages to prompt you for information before they are
installed. This is a reimplementation of the original debconf version
in C.
.
cdebconf-udeb is a minimal cdebconf package used by the
debian-installer
Package: cdrom-core-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, ide-modules-2.6.16-2-486-di
Provides: cdrom-core-modules
Description: CDROM support
This package contains core CDROM support for the Linux kernel.
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: os-prober, tzsetup-udeb, mounted-partitions
Description: set up clock
Installer-Menu-Item: 62
Package: crypto-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: crypto-modules
Description: crypto modules
This package contains crypto modules.
Package: cryptsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 400
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Version: 2:1.0.3-3
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2), libpopt0-udeb (>= 1.10), libuuid1-udeb, dmsetup-udeb
Description: configures encrypted block devices
Since kernel 2.6.4, encrypted filesystem support is provided by the device
mapper target dm-crypt. This utility provides a command-line interface for
configuring this facility. It has integrated support for LUKS.
.
cryptsetup is backwards compatible with the on-disk format of cryptoloop,
but also supports more secure formats. This package also includes support
for automatically configuring encrypted devices at boot time via the config
file /etc/crypttab. When combined with newer versions of the debian
initrd-tools and standard debian kernels, cryptoroot is also supported.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp3-client-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 416
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 3.0.4-6
Depends: libc6 (>= 2.3.6-6)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.32
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.42)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: dmsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.07-1
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Kernel Device Mapper userspace library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
.
This package contains a utility for modifying device mappings.
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 352
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 88
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.6
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, firmware-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
This udeb will install elilo on the hard disk.
Installer-Menu-Item: 76
Package: ext3-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fat-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: fat-modules
Description: FAT filesystem support
This package contains the FAT and VFAT filesystem modules for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 140
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-10
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.4
Depends: archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: firewire-core-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 196
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: scsi-core-modules-2.6.16-2-486-di, kernel-image-2.6.16-2-486-di
Provides: firewire-core-modules
Description: Core FireWire drivers
This package contains core FireWire drivers for the Linux kernel.
Package: firmware-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: firmware-modules
Description: Firmware request modules
This package contains linux kernel modules that support requesting
external firmware.
Package: floppy-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: floppy-modules
Description: Floppy driver
This package contains the floppy driver for the Linux kernel.
Package: gnupg-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 664
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.3-2
Depends: libc6 (>= 2.3.6-6), libusb-0.1-udeb (>= 2:0.1.12), zlib1g-udeb (>= 1:1.2.1)
Description: GNU privacy guard - a free PGP replacement
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG packaged in minimal form for use in debian-installer.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: hw-detect
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 252
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: ide-core-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 148
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: ide-core-modules
Description: IDE support
This package contains core IDE support for the Linux kernel.
Package: ide-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 420
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, ide-core-modules-2.6.16-2-486-di
Provides: ide-modules
Description: IDE drivers
This package contains IDE drivers for the Linux kernel.
Package: jfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1024
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.8-1
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1528
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6-16
Provides: libc6, libc-udeb, glibc-2.3.6-2, glibc-2.3.5-3
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.07-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 328
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libpopt0-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Paul Martin <pm@debian.org>
Version: 1.10-2
Depends: libc6 (>= 2.3.6-6)
Description: lib for parsing cmdline parameters
Popt was heavily influenced by the getopt() and getopt_long() functions,
but it allows more powerful argument expansion. It can parse arbitrary
argv[] style arrays and automatically set variables based on command
line arguments. It also allows command line arguments to be aliased via
configuration files and includes utility functions for parsing arbitrary
strings into argv[] arrays using shell-like rules.
.
This package contains the runtime library and locale data.
.
This is a minimal package for use in debian-installer.
Package: libslang2-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 664
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Version: 2.0.6-2
Depends: libc-udeb
Description: S-Lang library for Debian Installer
This is a udeb, or a microdeb, of the S-Lang library with wide charater
support. As such it is the installer counterpart of libslang2.
You only need this package to support applications needing S-Lang during
the Debian installation process time and probably don't need to select it.
Package: libtextwrap1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: libusb-0.1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Aurelien Jarno <aurel32@debian.org>
Version: 2:0.1.12-2
Depends: libc6 (>= 2.3.5-1)
Provides: libusb-0.1-4
Description: userspace USB programming library
Library for programming USB applications without the knowledge
of Linux kernel internals.
.
More information can be found at the Linux USB web site
http://www.linux-usb.org/ .
.
This is a minimal package for use in debian-installer.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 20
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 204
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-aes-2.6.16-2-486-di
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 148
Maintainer: Max Vozeler <xam@debian.org>
Version: 3.1d+3+3
Depends: kernel-image-2.6.16-2-486-di, mount-aes-udeb (>= 2.12p-1)
Provides: loop-aes-modules
Description: loop-AES encryption modules for kernel 2.6.16-2-486-di
This package contains the loop-AES loadable Linux kernel modules
compiled for kernel 2.6.16-2-486-di
.
loop-AES can be used to encrypt disk partitions, removable media,
swap space and other devices. It provides measures to strengthen
the encryption: Passphrase seeds, multiple hash iterations, MD5 IV
and use of alternating encryption keys.
.
Encryption keys can be stored in a GnuPG-encrypted keyfile, which
allows the passphrase to be changed without re-encryption. Keyfiles
can also be encrypted asymmetrically for multi-user access.
.
This package includes the cipher modules blowfish, twofish and
serpent in addition to the default cipher (AES).
.
If you compiled a custom kernel, you will most likely need to
compile a custom version of these modules as well. The package
loop-aes-source has been provided for this purpose.
Package: loop-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 396
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-2
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 140
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.2-8
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD device arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
devices (software RAID), as well as multipath devices.
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb, partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-3
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: mount-aes-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 216
Maintainer: Max Vozeler <xam@debian.org>
Version: 2.12r-13
Depends: libblkid1-udeb (>= 1.37-1), libc6 (>= 2.3.6-6), libuuid1-udeb
Description: Mount utils for loop-AES
loop-AES patched mount, losetup and swapon
Package: nano-udeb
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Jordi Mallach <jordi@debian.org>
Version: 1.3.12-2
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.1-1)
Provides: editor
Description: free Pico clone with some new features - tiny build
GNU nano is a free replacement for Pico, the default Pine editor. Pine is
copyrighted under a restrictive licence, that makes it unsuitable for
Debian's main section. GNU nano is an effort to provide a Pico-like
editor, but also includes some features that were missing in the original,
such as 'search and replace', 'goto line' or internationalization support.
.
This package contains a minimal build of GNU nano, aimed for use in
debian-installer. Thus, many features are disabled in this version.
Package: nic-extra-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2648
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di, crc-modules-2.6.16-2-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 436
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di, firewire-core-modules-2.6.16-2-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 588
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, nic-extra-modules-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David MartÃnez Moreno <ender@debian.org>
Version: 1.13.1-2
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 60
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 656
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 54
Depends: di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base (>= 73), partman-auto (>= 51), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 836
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 92
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 564
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 668
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 8
Depends: partman-base (>= 87), partman-crypto-dm, partman-crypto-loop, cdebconf-newt-entropy (>= 0.3), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-crypto-dm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 8
Depends: partman-crypto, crypto-modules, cryptsetup-udeb
Description: Add to partman support for dm-crypt encryption
Package: partman-crypto-loop
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 8
Depends: partman-crypto, loop-aes-modules, mount-aes-udeb, gnupg-udeb
Description: Add to partman support for loop-AES encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 10
Depends: partman-base
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 41
Depends: e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 252
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 616
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 45
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 40
Depends: ntfstools-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Depends: mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Provides: pcmcia-modules
Description: Common PCMCIA drivers
This package contains common PCMCIA drivers for the Linux kernel.
Package: pcmcia-storage-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, ide-core-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Provides: pcmcia-storage-modules
Description: PCMCIA storage drivers
This package contains PCMCIA storage drivers for the Linux kernel.
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.07
Depends: apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: rootskel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: di-utils (>= 1.24)
Description: Skeleton root filesystem used by debian-installer
Package: sata-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 344
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di
Provides: sata-modules
Description: SATA drivers
This package contains SATA drivers for the Linux kernel.
Package: scsi-common-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 704
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di
Provides: scsi-common-modules
Description: Very common SCSI drivers
This package contains very common SCSI drivers for the Linux kernel.
Package: scsi-core-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: scsi-core-modules
Description: Core SCSI subsystem
This package contains the core SCSI subsystem for the Linux kernel.
Package: scsi-extra-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: scsi-modules-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: scsi-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1112
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, parport-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Provides: scsi-modules
Description: SCSI drivers
This package contains SCSI drivers for the Linux kernel.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.10
Depends: localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: usb-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: usb-modules
Description: USB support
This package contains core USB drivers for the Linux kernel.
Package: usb-storage-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: ide-core-modules-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Provides: usb-storage-modules
Description: USB storage support
This package contains the USB storage driver for the Linux kernel.
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.4
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: xfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 580
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.4-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This minimal package includes the shared library
for use with the Debian installer.
Package: kernel-image-2.6.16-2-486-di
Status: install ok unpacked
Priority: extra
Section: debian-installer
Installed-Size: 1836
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
This package contains the Linux kernel image for the Debian installer
boot images. It does _not_ provide a usable kernel for your full
Debian system.
Package: ntfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-2-686
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii reportbug 3.21.2 reports bugs in the Debian distrib
-- no debconf information
--- End Message ---