--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: installation-report: somewhat successful installation on Supermicro A+ AS1020P-T
- From: Filip Van Raemdonck <mechanix@debian.org>
- Date: Fri, 19 May 2006 14:02:16 +0200
- Message-id: <20060519120216.GA1183@slider2.rack66.net>
Package: installation-reports
Version: 2.14
Severity: normal
Boot method: CD
Image version: http://cdimage.debian.org/cdimage/etch_di_beta2/amd64/iso-cd/debian-testing-amd64-netinst.iso 2006-03-14 17:47 97886208 bytes
Date: 18/05/2006
Machine: Supermicro A+ dual Opteron server, model AS1020P-T, one CPU
(they forgot to put in the second, it will be delivered next week or so)
Partitions: hardware RAID5 using 4 SATA disks on a 3ware escalade 9500
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/mapper/alpha-root xfs 2086912 372256 1714656 18% /
/dev/sda1 ext2 180639 7963 172676 5% /boot
vgdisplay -v
Finding all volume groups
Incorrect metadata area header checksum
Finding volume group "alpha"
--- Volume group ---
VG Name alpha
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 2
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 1
Open LV 1
Max PV 0
Cur PV 1
Act PV 1
VG Size 502,81 GB
PE Size 4,00 MB
Total PE 128719
Alloc PE / Size 512 / 2,00 GB
Free PE / Size 128207 / 500,81 GB
VG UUID 5UFhkB-QmnU-2jzX-coGL-57Kv-YNwG-ZMTywI
--- Logical volume ---
LV Name /dev/alpha/root
VG Name alpha
LV UUID uleZbs-ELw1-YfDO-EZbs-RpIW-xh1V-VN5RNr
LV Write Access read/write
LV Status available
# open 1
LV Size 2,00 GB
Current LE 512
Segments 1
Allocation inherit
Read ahead sectors 0
Block device 254:0
--- Physical volumes ---
PV Name /dev/sda2
PV UUID u95wVM-95d6-Ptyq-ZQfu-Awa3-U0Cn-kVKwG5
PV Status allocatable
Total PE / Free PE 128719 / 128207
fdisk -l
Disk /dev/sda: 1199.9 GB, 1199966257152 bytes
255 heads, 63 sectors/track, 145887 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 24 192748+ 83 Linux
/dev/sda2 25 65662 527237235 8e Linux LVM
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Installed system ok: [O]
Comments/Problems:
I said somewhat succesful installation in the subject, because
I actually tried installing using the netinst image of 17 may first;
where I did partitioning and fs creation (manually; more on that later).
It did not work because of what is reported in #366177 (but not
correctly diagnosed): tar is missing and the base system cannot be
installed. I tried other netinst images but they had the same problem.
When I downloaded the tar .deb from the installer shell using wget,
put it in /target/var/cache/apt/archives and updated the debootstrap
script to forcibly add tar to $required, it still would not work because
debootstrap said it could not find tar (I assume it wants to copy or
download it and does not use a previously downloaded version).
At that point, I tried the business card image but that gave me an error
earlier on, at network configuration (manually, told on the boot line
not to use DHCP). The 4th console said something about a "symbol
getnameinfo" "version GLIBC_2.2.5 not defined" in netcfg.
The weekly build of the full iso had the same problem.
Then I gave up and tried sarge, which as I actually already knew was too
old - the network card was not detected, nor the 3ware raid controller -
after which I used the beta2 netinst image, which at last worked flawlessly.
About partitioning: I wanted to add "-d su=64k,sw=3" to mkfs.xfs to get
stripe-aligned data chunks, but there's no way that I can see to add
such options. So I partitioned and then from the shell ran mkfs.xfs
manually afterwards; it'd be nice if there were some way to add mkfs
options though.
There's one more oddity, which is the "Incorrect metadata area header
checksum" message lvdisplay/vgdisplay/pvdisplay are giving. Anyone know
what that could be?
--
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20060304)"
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux centaurus 2.6.15-1-amd64-generic #2 Thu Feb 23 04:51:53 UTC 2006 x86_64 unknown
lspci -v -t: -[00]-+-01.0-[01-02]----0d.0-[02]--
lspci -v -t: +-02.0 Broadcom HT1000 Legacy South Bridge
lspci -v -t: +-02.1 Broadcom HT1000 Legacy IDE controller
lspci -v -t: +-02.2 Broadcom HT1000 LPC Bridge
lspci -v -t: +-03.0 Broadcom HT1000 USB Controller
lspci -v -t: +-03.1 Broadcom HT1000 USB Controller
lspci -v -t: +-03.2 Broadcom HT1000 USB Controller
lspci -v -t: +-05.0 ATI Technologies Inc Rage XL
lspci -v -t: +-08.0-[03]----06.0 3ware Inc: Unknown device 1003
lspci -v -t: +-09.0-[04]--+-04.0 Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet
lspci -v -t: | \-04.1 Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet
lspci -v -t: +-0a.0-[05]--
lspci -v -t: +-0b.0-[06]--
lspci -v -t: +-0c.0-[07]--
lspci -v -t: +-0d.0-[08]--
lspci -v -t: +-18.0 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
lspci -v -t: +-18.1 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
lspci -v -t: +-18.2 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
lspci -v -t: \-18.3 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
lspci -n: 0000:00:01.0 0604: 1166:0036
lspci -n: 0000:00:02.0 0600: 1166:0205
lspci -n: 0000:00:02.1 0101: 1166:0214
lspci -n: 0000:00:02.2 0601: 1166:0234
lspci -n: 0000:00:03.0 0c03: 1166:0223 (rev 01)
lspci -n: 0000:00:03.1 0c03: 1166:0223 (rev 01)
lspci -n: 0000:00:03.2 0c03: 1166:0223 (rev 01)
lspci -n: 0000:00:05.0 0300: 1002:4752 (rev 27)
lspci -n: 0000:00:08.0 0604: 1166:0130 (rev a3)
lspci -n: 0000:00:09.0 0604: 1166:0130 (rev a3)
lspci -n: 0000:00:0a.0 0604: 1166:0132 (rev a3)
lspci -n: 0000:00:0b.0 0604: 1166:0132 (rev a3)
lspci -n: 0000:00:0c.0 0604: 1166:0132 (rev a3)
lspci -n: 0000:00:0d.0 0604: 1166:0132 (rev a3)
lspci -n: 0000:00:18.0 0600: 1022:1100
lspci -n: 0000:00:18.1 0600: 1022:1101
lspci -n: 0000:00:18.2 0600: 1022:1102
lspci -n: 0000:00:18.3 0600: 1022:1103
lspci -n: 0000:01:0d.0 0604: 1166:0104 (rev b2)
lspci -n: 0000:03:06.0 0104: 13c1:1003
lspci -n: 0000:04:04.0 0200: 14e4:166a (rev 03)
lspci -n: 0000:04:04.1 0200: 14e4:166a (rev 03)
lspci -v: 0000:00:01.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge
lspci -v: Flags: bus master, fast devsel, latency 64
lspci -v: Bus: primary=00, secondary=01, subordinate=02, sec-latency=64
lspci -v: Capabilities: [90] PCI-X bridge device.
lspci -v: Capabilities: [a0] #08 [a800]
lspci -v: Capabilities: [b0] #08 [0061]
lspci -v:
lspci -v: 0000:00:02.0 Host bridge: Broadcom HT1000 Legacy South Bridge
lspci -v: Subsystem: Broadcom: Unknown device 0201
lspci -v: Flags: bus master, medium devsel, latency 64
lspci -v:
lspci -v: 0000:00:02.1 IDE interface: Broadcom HT1000 Legacy IDE controller (prog-if 8a [Master SecP PriP])
lspci -v: Subsystem: Broadcom HT1000 Legacy IDE controller
lspci -v: Flags: bus master, medium devsel, latency 64
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at ffa0 [size=16]
lspci -v:
lspci -v: 0000:00:02.2 ISA bridge: Broadcom HT1000 LPC Bridge
lspci -v: Subsystem: Broadcom: Unknown device 0230
lspci -v: Flags: bus master, medium devsel, latency 0
lspci -v:
lspci -v: 0000:00:03.0 USB Controller: Broadcom HT1000 USB Controller (rev 01) (prog-if 10)
lspci -v: Subsystem: Broadcom HT1000 USB Controller
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10
lspci -v: Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
lspci -v: I/O ports at e800 [size=256]
lspci -v: Capabilities: [dc] Power Management version 2
lspci -v:
lspci -v: 0000:00:03.1 USB Controller: Broadcom HT1000 USB Controller (rev 01) (prog-if 10)
lspci -v: Subsystem: Broadcom HT1000 USB Controller
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10
lspci -v: Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
lspci -v: I/O ports at d800 [size=256]
lspci -v: Capabilities: [dc] Power Management version 2
lspci -v:
lspci -v: 0000:00:03.2 USB Controller: Broadcom HT1000 USB Controller (rev 01) (prog-if 20)
lspci -v: Subsystem: Broadcom HT1000 USB Controller
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10
lspci -v: Memory at febfb000 (32-bit, non-prefetchable) [size=4K]
lspci -v: I/O ports at d400 [size=256]
lspci -v: Capabilities: [dc] Power Management version 2
lspci -v:
lspci -v: 0000:00:05.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
lspci -v: Subsystem: ATI Technologies Inc: Unknown device 8008
lspci -v: Flags: bus master, stepping, medium devsel, latency 64, IRQ 10
lspci -v: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
lspci -v: I/O ports at e000 [size=256]
lspci -v: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Expansion ROM at febc0000 [disabled] [size=128K]
lspci -v: Capabilities: [5c] Power Management version 2
lspci -v:
lspci -v: 0000:00:08.0 PCI bridge: Broadcom HT1000 PCI-X bridge (rev a3)
lspci -v: Flags: bus master, fast devsel, latency 64
lspci -v: Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
lspci -v: I/O behind bridge: 0000b000-0000bfff
lspci -v: Memory behind bridge: fc900000-fc9fffff
lspci -v: Prefetchable memory behind bridge: 00000000f8600000-00000000fc600000
lspci -v: Capabilities: [90] PCI-X bridge device.
lspci -v: Capabilities: [a0] #08 [a800]
lspci -v: Capabilities: [b0] #08 [00c8]
lspci -v:
lspci -v: 0000:00:09.0 PCI bridge: Broadcom HT1000 PCI-X bridge (rev a3)
lspci -v: Flags: bus master, fast devsel, latency 64
lspci -v: Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
lspci -v: Memory behind bridge: fca00000-fcafffff
lspci -v: Prefetchable memory behind bridge: 00000000fc700000-00000000fc700000
lspci -v: Capabilities: [90] PCI-X bridge device.
lspci -v: Capabilities: [a0] #08 [a800]
lspci -v:
lspci -v: 0000:00:0a.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
lspci -v: Capabilities: [a0] #08 [a800]
lspci -v: Capabilities: [b0] #10 [0041]
lspci -v:
lspci -v: 0000:00:0b.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=06, subordinate=06, sec-latency=64
lspci -v: Capabilities: [a0] #08 [a800]
lspci -v: Capabilities: [b0] #10 [0041]
lspci -v:
lspci -v: 0000:00:0c.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
lspci -v: Capabilities: [a0] #08 [a800]
lspci -v: Capabilities: [b0] #10 [0041]
lspci -v:
lspci -v: 0000:00:0d.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=08, subordinate=08, sec-latency=64
lspci -v: Capabilities: [a0] #08 [a800]
lspci -v: Capabilities: [b0] #10 [0041]
lspci -v:
lspci -v: 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
lspci -v: Flags: fast devsel
lspci -v: Capabilities: [80] #08 [2101]
lspci -v: Capabilities: [a0] #08 [2101]
lspci -v: Capabilities: [c0] #08 [2101]
lspci -v:
lspci -v: 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
lspci -v: Flags: fast devsel
lspci -v:
lspci -v: 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
lspci -v: Flags: fast devsel
lspci -v:
lspci -v: 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
lspci -v: Flags: fast devsel
lspci -v:
lspci -v: 0000:01:0d.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge (rev b2)
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 64
lspci -v: Bus: primary=01, secondary=02, subordinate=02, sec-latency=64
lspci -v: Capabilities: [90] PCI-X bridge device.
lspci -v:
lspci -v: 0000:03:06.0 RAID bus controller: 3ware Inc: Unknown device 1003
lspci -v: Subsystem: 3ware Inc: Unknown device 1003
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
lspci -v: Memory at fa000000 (64-bit, prefetchable) [size=32M]
lspci -v: Memory at fc9ff000 (64-bit, non-prefetchable) [size=4K]
lspci -v: I/O ports at bc00 [size=64]
lspci -v: Expansion ROM at fc9c0000 [disabled] [size=128K]
lspci -v: Capabilities: [e0] PCI-X non-bridge device.
lspci -v: Capabilities: [e8] Power Management version 2
lspci -v: Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
lspci -v:
lspci -v: 0000:04:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03)
lspci -v: Subsystem: Super Micro Computer Inc: Unknown device 166a
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
lspci -v: Memory at fcaf0000 (64-bit, non-prefetchable) [size=64K]
lspci -v: Memory at fcae0000 (64-bit, non-prefetchable) [size=64K]
lspci -v: Capabilities: [40] Capabilities: [48] Power Management version 2
lspci -v: Capabilities: [50] Vital Product Data
lspci -v: Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
lspci -v:
lspci -v: 0000:04:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03)
lspci -v: Subsystem: Super Micro Computer Inc: Unknown device 166a
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
lspci -v: Memory at fcad0000 (64-bit, non-prefetchable) [size=64K]
lspci -v: Memory at fcac0000 (64-bit, non-prefetchable) [size=64K]
lspci -v: Capabilities: [40] Capabilities: [48] Power Management version 2
lspci -v: Capabilities: [50] Vital Product Data
lspci -v: Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
lspci -v:
lspci -x: 0000:00:01.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge
lspci -x: 00: 66 11 36 00 06 00 10 00 00 00 04 06 00 40 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 01 02 40 f1 01 00 24
lspci -x: 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 90 00 00 00 00 00 00 00 60 00 04 00
lspci -x:
lspci -x: 0000:00:02.0 Host bridge: Broadcom HT1000 Legacy South Bridge
lspci -x: 00: 66 11 05 02 07 01 00 02 00 00 00 06 00 40 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 66 11 01 02
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:02.1 IDE interface: Broadcom HT1000 Legacy IDE controller
lspci -x: 00: 66 11 14 02 05 00 00 02 00 8a 01 01 10 40 80 00
lspci -x: 10: f1 01 00 00 f5 03 00 00 71 01 00 00 75 03 00 00
lspci -x: 20: a1 ff 00 00 00 00 00 00 00 00 00 00 66 11 14 02
lspci -x: 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:02.2 ISA bridge: Broadcom HT1000 LPC Bridge
lspci -x: 00: 66 11 34 02 07 01 00 02 00 00 01 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 66 11 30 02
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:03.0 USB Controller: Broadcom HT1000 USB Controller (rev 01)
lspci -x: 00: 66 11 23 02 17 01 b0 02 01 10 03 0c 10 40 80 00
lspci -x: 10: 00 d0 bf fe 01 e8 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 66 11 23 02
lspci -x: 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 00 00
lspci -x:
lspci -x: 0000:00:03.1 USB Controller: Broadcom HT1000 USB Controller (rev 01)
lspci -x: 00: 66 11 23 02 17 01 b0 02 01 10 03 0c 10 40 00 00
lspci -x: 10: 00 c0 bf fe 01 d8 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 66 11 23 02
lspci -x: 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 00 00
lspci -x:
lspci -x: 0000:00:03.2 USB Controller: Broadcom HT1000 USB Controller (rev 01)
lspci -x: 00: 66 11 23 02 17 01 b0 02 01 20 03 0c 10 40 00 00
lspci -x: 10: 00 b0 bf fe 01 d4 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 66 11 23 02
lspci -x: 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 00 00
lspci -x:
lspci -x: 0000:00:05.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
lspci -x: 00: 02 10 52 47 87 00 90 02 27 00 00 03 10 40 00 00
lspci -x: 10: 00 00 00 fd 01 e0 00 00 00 f0 bf fe 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 08 80
lspci -x: 30: 00 00 bc fe 5c 00 00 00 00 00 00 00 0a 01 08 00
lspci -x:
lspci -x: 0000:00:08.0 PCI bridge: Broadcom HT1000 PCI-X bridge (rev a3)
lspci -x: 00: 66 11 30 01 07 00 10 00 a3 00 04 06 00 40 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 03 03 40 b1 b1 00 02
lspci -x: 20: 90 fc 90 fc 61 f8 61 fc 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 90 00 00 00 00 00 00 00 60 00 04 00
lspci -x:
lspci -x: 0000:00:09.0 PCI bridge: Broadcom HT1000 PCI-X bridge (rev a3)
lspci -x: 00: 66 11 30 01 06 00 10 00 a3 00 04 06 00 40 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 04 04 40 f1 01 00 24
lspci -x: 20: a0 fc a0 fc 71 fc 71 fc 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 90 00 00 00 00 00 00 00 60 00 04 00
lspci -x:
lspci -x: 0000:00:0a.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3)
lspci -x: 00: 66 11 32 01 06 00 10 00 a3 00 04 06 00 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 05 05 40 f1 01 00 02
lspci -x: 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 a0 00 00 00 00 00 00 00 60 00 04 00
lspci -x:
lspci -x: 0000:00:0b.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3)
lspci -x: 00: 66 11 32 01 06 00 10 00 a3 00 04 06 00 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 06 06 40 f1 01 00 02
lspci -x: 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 a0 00 00 00 00 00 00 00 60 00 04 00
lspci -x:
lspci -x: 0000:00:0c.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3)
lspci -x: 00: 66 11 32 01 06 00 10 00 a3 00 04 06 00 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 07 07 40 f1 01 00 02
lspci -x: 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 a0 00 00 00 00 00 00 00 60 00 04 00
lspci -x:
lspci -x: 0000:00:0d.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3)
lspci -x: 00: 66 11 32 01 06 00 10 00 a3 00 04 06 00 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 08 08 40 f1 01 00 02
lspci -x: 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 a0 00 00 00 00 00 00 00 60 00 04 00
lspci -x:
lspci -x: 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
lspci -x: 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
lspci -x: 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
lspci -x: 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
lspci -x: 00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:01:0d.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge (rev b2)
lspci -x: 00: 66 11 04 01 16 00 30 02 b2 00 04 06 10 40 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 01 02 02 40 f1 01 20 22
lspci -x: 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 90 00 00 00 00 00 00 00 00 00 04 02
lspci -x:
lspci -x: 0000:03:06.0 RAID bus controller: 3ware Inc: Unknown device 1003
lspci -x: 00: c1 13 03 10 17 01 b0 02 00 00 04 01 10 40 00 00
lspci -x: 10: 0c 00 00 fa 00 00 00 00 04 f0 9f fc 00 00 00 00
lspci -x: 20: 01 bc 00 00 00 00 00 00 00 00 00 00 c1 13 03 10
lspci -x: 30: 00 00 9c fc e0 00 00 00 00 00 00 00 0b 01 40 00
lspci -x:
lspci -x: 0000:04:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03)
lspci -x: 00: e4 14 6a 16 06 01 b0 02 03 00 00 02 10 40 80 00
lspci -x: 10: 04 00 af fc 00 00 00 00 04 00 ae fc 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 d9 15 6a 16
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 09 01 40 00
lspci -x:
lspci -x: 0000:04:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03)
lspci -x: 00: e4 14 6a 16 06 01 b0 02 03 00 00 02 10 40 80 00
lspci -x: 10: 04 00 ad fc 00 00 00 00 04 00 ac fc 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 d9 15 6a 16
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 05 02 40 00
lspci -x:
lsmod: Module Size Used by
lsmod: qnx4 12352 0
lsmod: ntfs 181720 0
lsmod: dm_mod 54504 2
lsmod: xfs 474376 1
lsmod: exportfs 6016 1 xfs
lsmod: reiserfs 227312 0
lsmod: jfs 155952 0
lsmod: ext3 129040 0
lsmod: jbd 54312 1 ext3
lsmod: vfat 13568 0
lsmod: fat 50864 1 vfat
lsmod: sd_mod 18584 3
lsmod: 3w_9xxx 33952 2
lsmod: tg3 96644 0
lsmod: nls_iso8859_1 5760 0
lsmod: isofs 35680 0
lsmod: ide_cd 40352 0
lsmod: cdrom 36408 1 ide_cd
lsmod: ide_disk 16896 0
lsmod: ide_generic 1792 0 [permanent]
lsmod: cmd64x 11464 0 [permanent]
lsmod: pdc202xx_old 11264 0 [permanent]
lsmod: amd74xx 15408 0 [permanent]
lsmod: via82cxxx 9476 0 [permanent]
lsmod: alim15x3 12316 0 [permanent]
lsmod: slc90e66 5888 0 [permanent]
lsmod: hpt34x 6016 0 [permanent]
lsmod: pdc202xx_new 9472 0 [permanent]
lsmod: sis5513 14228 0 [permanent]
lsmod: atiixp 6416 0 [permanent]
lsmod: siimage 12672 0 [permanent]
lsmod: triflex 4608 0 [permanent]
lsmod: it821x 9092 0 [permanent]
lsmod: cs5520 5504 0 [permanent]
lsmod: ns87415 5036 0 [permanent]
lsmod: cs5530 5760 0 [permanent]
lsmod: sc1200 7808 0 [permanent]
lsmod: cy82c693 5256 0 [permanent]
lsmod: trm290 4996 0 [permanent]
lsmod: piix 11012 0 [permanent]
lsmod: aec62xx 7936 0 [permanent]
lsmod: opti621 4996 0 [permanent]
lsmod: rz1000 3328 0 [permanent]
lsmod: floppy 66112 0
lsmod: usb_storage 72128 0
lsmod: scsi_mod 145048 3 sd_mod,3w_9xxx,usb_storage
lsmod: generic 5764 0 [permanent]
lsmod: vga16fb 12816 2
lsmod: vgastate 8832 1 vga16fb
lsmod: thermal 15500 0
lsmod: processor 24664 1 thermal
lsmod: fan 5512 0
lsmod: serverworks 9488 0 [permanent]
lsmod: ide_core 139096 29 ide_cd,ide_disk,ide_generic,cmd64x,pdc202xx_old,amd74xx,via82cxxx,alim15x3,slc90e66,hpt34x,pdc202xx_new,sis5513,atiixp,siimage,triflex,it821x,cs5520,ns87415,cs5530,sc1200,cy82c693,trm290,piix,aec62xx,opti621,rz1000,usb_storage,generic,serverworks
lsmod: ehci_hcd 31240 0
lsmod: ohci_hcd 19844 0
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 102400 30632 71768 30% /
df: tmpfs 1997444 428 1997016 0% /dev
df: tmpfs 1997444 428 1997016 0% /dev
df: tmpfs 1997444 428 1997016 0% /.dev
df: /dev/mapper/alpha-root 2086912 268824 1818088 13% /target
df: /dev/scsi/host0/bus0/target0/lun0/part1 180639 7963 172676 4% /target/boot
free: total used free shared buffers
free: Mem: 3994888 394760 3600128 0 332
free: Swap: 0 0 0
free: Total: 3994888 394760 3600128
cardctl status: /usr/bin/report-hw: 32: cardctl: not found
cardctl ident: /usr/bin/report-hw: 33: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : AuthenticAMD
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 37
/proc/cpuinfo: model name : AMD Opteron(tm) Processor 246
/proc/cpuinfo: stepping : 1
/proc/cpuinfo: cpu MHz : 1995.043
/proc/cpuinfo: cache size : 1024 KB
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 1
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm
/proc/cpuinfo: bogomips : 3994.78
/proc/cpuinfo: TLB size : 1024 4K pages
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 40 bits physical, 48 bits virtual
/proc/cpuinfo: power management: ts fid vid ttp
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0070-0077 : rtc
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 02f8-02ff : serial
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0500-0503 : PM1a_EVT_BLK
/proc/ioports: 0504-0505 : PM1a_CNT_BLK
/proc/ioports: 0508-050b : PM_TMR
/proc/ioports: 0514-051b : GPE0_BLK
/proc/ioports: 0520-053f : pnp 00:08
/proc/ioports: 0540-0543 : PM1b_EVT_BLK
/proc/ioports: 0544-0545 : PM1b_CNT_BLK
/proc/ioports: 0550-0557 : GPE1_BLK
/proc/ioports: 0580-058f : pnp 00:0a
/proc/ioports: 0590-0593 : pnp 00:0a
/proc/ioports: 0600-061f : pnp 00:08
/proc/ioports: 0640-065f : pnp 00:08
/proc/ioports: 0700-0703 : pnp 00:0a
/proc/ioports: 0800-080f : pnp 00:08
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 5010-5015 : ACPI CPU throttle
/proc/ioports: b000-bfff : PCI Bus #03
/proc/ioports: bc00-bc3f : 0000:03:06.0
/proc/ioports: bc00-bc3f : 3w-9xxx
/proc/ioports: d400-d4ff : 0000:00:03.2
/proc/ioports: d800-d8ff : 0000:00:03.1
/proc/ioports: e000-e0ff : 0000:00:05.0
/proc/ioports: e800-e8ff : 0000:00:03.0
/proc/ioports: ffa0-ffaf : 0000:00:02.1
/proc/ioports: ffa0-ffa7 : ide0
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-f7feffff : System RAM
/proc/iomem: 00100000-002b2bd6 : Kernel code
/proc/iomem: 002b2bd7-0036dea7 : Kernel data
/proc/iomem: f7ff0000-f7ffdfff : ACPI Tables
/proc/iomem: f7ffe000-f7ffffff : ACPI Non-volatile Storage
/proc/iomem: f8600000-fc6fffff : PCI Bus #03
/proc/iomem: fa000000-fbffffff : 0000:03:06.0
/proc/iomem: fa000000-fbffffff : 3w-9xxx
/proc/iomem: fc700000-fc7fffff : PCI Bus #04
/proc/iomem: fc900000-fc9fffff : PCI Bus #03
/proc/iomem: fc9c0000-fc9dffff : 0000:03:06.0
/proc/iomem: fc9ff000-fc9fffff : 0000:03:06.0
/proc/iomem: fc9ff000-fc9fffff : 3w-9xxx
/proc/iomem: fca00000-fcafffff : PCI Bus #04
/proc/iomem: fcac0000-fcacffff : 0000:04:04.1
/proc/iomem: fcac0000-fcacffff : tg3
/proc/iomem: fcad0000-fcadffff : 0000:04:04.1
/proc/iomem: fcad0000-fcadffff : tg3
/proc/iomem: fcae0000-fcaeffff : 0000:04:04.0
/proc/iomem: fcae0000-fcaeffff : tg3
/proc/iomem: fcaf0000-fcafffff : 0000:04:04.0
/proc/iomem: fcaf0000-fcafffff : tg3
/proc/iomem: fd000000-fdffffff : 0000:00:05.0
/proc/iomem: febc0000-febdffff : 0000:00:05.0
/proc/iomem: febfb000-febfbfff : 0000:00:03.2
/proc/iomem: febfb000-febfbfff : ehci_hcd
/proc/iomem: febfc000-febfcfff : 0000:00:03.1
/proc/iomem: febfc000-febfcfff : ohci_hcd
/proc/iomem: febfd000-febfdfff : 0000:00:03.0
/proc/iomem: febfd000-febfdfff : ohci_hcd
/proc/iomem: febff000-febfffff : 0000:00:05.0
/proc/iomem: fec00000-fec02fff : reserved
/proc/iomem: fee00000-fee00fff : reserved
/proc/iomem: ff700000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 1988603 IO-APIC-edge timer
/proc/interrupts: 1: 3332 IO-APIC-edge i8042
/proc/interrupts: 8: 0 IO-APIC-edge rtc
/proc/interrupts: 9: 1 IO-APIC-level acpi
/proc/interrupts: 10: 2 IO-APIC-level ohci_hcd:usb1, ohci_hcd:usb2, ehci_hcd:usb3
/proc/interrupts: 14: 1218 IO-APIC-edge ide0
/proc/interrupts: 16: 22519 IO-APIC-level eth0
/proc/interrupts: 18: 29400 IO-APIC-level 3w-9xxx
/proc/interrupts: NMI: 680
/proc/interrupts: LOC: 1988122
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 3994888 kB
/proc/meminfo: MemFree: 3600128 kB
/proc/meminfo: Buffers: 332 kB
/proc/meminfo: Cached: 307548 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 236088 kB
/proc/meminfo: Inactive: 86280 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 3994888 kB
/proc/meminfo: LowFree: 3600128 kB
/proc/meminfo: SwapTotal: 0 kB
/proc/meminfo: SwapFree: 0 kB
/proc/meminfo: Dirty: 6896 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 17744 kB
/proc/meminfo: Slab: 55304 kB
/proc/meminfo: CommitLimit: 1997444 kB
/proc/meminfo: Committed_AS: 58696 kB
/proc/meminfo: PageTables: 416 kB
/proc/meminfo: VmallocTotal: 34359738367 kB
/proc/meminfo: VmallocUsed: 6244 kB
/proc/meminfo: VmallocChunk: 34359732019 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=402000000 3802078f840d001 f2ffffdfffefffff fffffffffffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
# dmidecode 2.8
SMBIOS 2.3 present.
60 structures occupying 2434 bytes.
Table at 0x000FBC00.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: 080011
Release Date: 03/20/2006
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 1024 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: Supermicro
Product Name: H8DSP-8
Version: 1234567890
Serial Number: 1234567890
UUID: 00020003-0004-0005-0006-000700080009
Wake-up Type: <OUT OF SPEC>
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Supermicro
Product Name: H8DSP-8
Version: 1234567890
Serial Number: 1234567890
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: To Be Filled By O.E.M.
Type: Desktop
Lock: Not Present
Version: To Be Filled By O.E.M.
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: CPU 1
Type: Central Processor
Family: Opteron
Manufacturer: AMD
ID: 51 0F 02 00 FF FB 8B 07
Signature: Extended Family 0, Model 5, Stepping 1
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
Version: AMD Opteron(tm) Processor 246
Voltage: 3.3 V 2.9 V
External Clock: 200 MHz
Max Speed: 2000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: Socket 940
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: 0x0007
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1-Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 64 KB
Maximum Size: 64 KB
Supported SRAM Types:
Pipeline Burst
Installed SRAM Type: Pipeline Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 4-way Set-associative
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2-Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 1024 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Pipeline Burst
Installed SRAM Type: Pipeline Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x0007, DMI type 7, 19 bytes
Cache Information
Socket Designation: L3-Cache
Configuration: Disabled, Not Socketed, Level 3
Operational Mode: Unknown
Location: Internal
Installed Size: 0 KB
Maximum Size: 0 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0008, DMI type 4, 35 bytes
Processor Information
Socket Designation: CPU 2
Type: Central Processor
Family: Other
Manufacturer:
ID: 00 00 00 00 00 00 00 00
Version:
Voltage: 3.3 V 2.9 V
External Clock: Unknown
Max Speed: 2000 MHz
Current Speed: Unknown
Status: Unpopulated
Upgrade: ZIF Socket
L1 Cache Handle: 0x0009
L2 Cache Handle: 0x000A
L3 Cache Handle: 0x000B
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Handle 0x0009, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1-Cache
Configuration: Disabled, Not Socketed, Level 1
Operational Mode: Unknown
Location: Internal
Installed Size: 0 KB
Maximum Size: 0 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000A, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2-Cache
Configuration: Disabled, Not Socketed, Level 2
Operational Mode: Unknown
Location: Internal
Installed Size: 0 KB
Maximum Size: 0 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000B, DMI type 7, 19 bytes
Cache Information
Socket Designation: L3-Cache
Configuration: Disabled, Not Socketed, Level 3
Operational Mode: Unknown
Location: Internal
Installed Size: 0 KB
Maximum Size: 0 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: PS2Mouse
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A2
Internal Connector Type: None
External Reference Designator: USB1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A2
Internal Connector Type: None
External Reference Designator: USB2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J4A1
Internal Connector Type: None
External Reference Designator: LPT 1
External Connector Type: DB-25 male
Port Type: Parallel Port ECP/EPP
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A1
Internal Connector Type: None
External Reference Designator: COM A
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6A1
Internal Connector Type: None
External Reference Designator: Audio Mic In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6A1
Internal Connector Type: None
External Reference Designator: Audio Line In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6B1 - AUX IN
Internal Connector Type: On Board Sound Input From CD-ROM
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Audio Port
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6B2 - CDIN
Internal Connector Type: On Board Sound Input From CD-ROM
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Audio Port
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6J2 - PRI IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6J1 - SEC IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J4J1 - FLOPPY
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9H1 - FRONT PNL
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1B1 - CHASSIS REAR FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2F1 - CPU FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8B4 - FRONT FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9G2 - FNT USB
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6C3 - FP AUD
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9G1 - CONFIG
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0020, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8C1 - SCSI LED
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0021, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9J2 - INTRUDER
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0022, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9G4 - ITP
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0023, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2H1 - MAIN POWER
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0024, DMI type 9, 13 bytes
System Slot Information
Designation: AGP
Type: 32-bit AGP 4x
Current Usage: Available
Length: Short
ID: 0
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0025, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0026, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: To Be Filled By O.E.M.
Handle 0x0027, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0028, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: Single-bit ECC
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 8
Handle 0x0029, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000F7FFFFFF
Range Size: 3968 MB
Physical Array Handle: 0x0028
Partition Width: 0
Handle 0x002A, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM0
Bank Locator: BANK0
Type: DDR
Type Detail: Synchronous
Speed: 400 MHz (2.5 ns)
Manufacturer: Manufacturer0
Serial Number: SerNum0
Asset Tag: AssetTagNum0
Part Number: PartNum0
Handle 0x002B, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x002A
Memory Array Mapped Address Handle: 0x0029
Partition Row Position: 1
Handle 0x002C, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM1
Bank Locator: BANK1
Type: DDR
Type Detail: Synchronous
Speed: 400 MHz (2.5 ns)
Manufacturer: Manufacturer1
Serial Number: SerNum1
Asset Tag: AssetTagNum1
Part Number: PartNum1
Handle 0x002D, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0007FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x002C
Memory Array Mapped Address Handle: 0x0029
Partition Row Position: 1
Handle 0x002E, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM2
Bank Locator: BANK2
Type: DDR
Type Detail: Synchronous
Speed: 400 MHz (2.5 ns)
Manufacturer: Manufacturer2
Serial Number: SerNum2
Asset Tag: AssetTagNum2
Part Number: PartNum2
Handle 0x002F, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000BFFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x002E
Memory Array Mapped Address Handle: 0x0029
Partition Row Position: 1
Handle 0x0030, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM3
Bank Locator: BANK3
Type: DDR
Type Detail: Synchronous
Speed: 400 MHz (2.5 ns)
Manufacturer: Manufacturer3
Serial Number: SerNum3
Asset Tag: AssetTagNum3
Part Number: PartNum3
Handle 0x0031, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x000C0000000
Ending Address: 0x000FFFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0030
Memory Array Mapped Address Handle: 0x0029
Partition Row Position: 1
Handle 0x0032, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DIMM4
Bank Locator: BANK4
Type: Unknown
Type Detail: Unknown
Speed: Unknown
Manufacturer: Manufacturer4
Serial Number: SerNum4
Asset Tag: AssetTagNum4
Part Number: PartNum4
Handle 0x0033, DMI type 126, 19 bytes
Inactive
Handle 0x0034, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DIMM5
Bank Locator: BANK5
Type: Unknown
Type Detail: Unknown
Speed: Unknown
Manufacturer: Manufacturer5
Serial Number: SerNum5
Asset Tag: AssetTagNum5
Part Number: PartNum5
Handle 0x0035, DMI type 126, 19 bytes
Inactive
Handle 0x0036, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DIMM6
Bank Locator: BANK6
Type: Unknown
Type Detail: Unknown
Speed: Unknown
Manufacturer: Manufacturer6
Serial Number: SerNum6
Asset Tag: AssetTagNum6
Part Number: PartNum6
Handle 0x0037, DMI type 126, 19 bytes
Inactive
Handle 0x0038, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DIMM7
Bank Locator: BANK7
Type: Unknown
Type Detail: Unknown
Speed: Unknown
Manufacturer: Manufacturer7
Serial Number: SerNum7
Asset Tag: AssetTagNum7
Part Number: PartNum7
Handle 0x0039, DMI type 126, 19 bytes
Inactive
Handle 0x003A, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Handle 0x003B, DMI type 127, 4 bytes
End Of Table
==============================================
Installer status:
==============================================
Package: scsi-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: scsi-modules
Depends: kernel-image-2.6.15-1-amd64-generic-di, scsi-core-modules-2.6.15-1-amd64-generic-di, scsi-common-modules-2.6.15-1-amd64-generic-di, parport-modules-2.6.15-1-amd64-generic-di, cdrom-core-modules-2.6.15-1-amd64-generic-di, firmware-modules-2.6.15-1-amd64-generic-di
Description: SCSI drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.14.1
Depends: di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.03
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.35)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.03
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.5-13
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.06
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.17
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: console-keymaps-usb
Status: install ok installed
Version: 2002.12.04dbs-52.2
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for USB keyboards
Package: cdrom-retriever
Status: install ok installed
Version: 1.08
Provides: retriever
Depends: cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.10
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.38)
Description: Debian installer main menu
Package: acpi-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: acpi-modules
Depends: kernel-image-2.6.15-1-amd64-generic-di
Description: ACPI support modules
Package: di-utils-shell
Status: install ok unpacked
Version: 1.23
Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.23
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.38)
Description: Miscellaneous utilities for the debian installer
Package: usb-storage-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.15-1-amd64-generic-di, scsi-core-modules-2.6.15-1-amd64-generic-di, usb-modules-2.6.15-1-amd64-generic-di
Description: USB storage support
Package: fb-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: fb-modules
Depends: kernel-image-2.6.15-1-amd64-generic-di
Description: Frame buffer support
Package: cdrom-core-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: cdrom-core-modules
Depends: kernel-image-2.6.15-1-amd64-generic-di, scsi-core-modules-2.6.15-1-amd64-generic-di, ide-modules-2.6.15-1-amd64-generic-di
Description: CDROM support
Package: ide-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: ide-modules
Depends: kernel-image-2.6.15-1-amd64-generic-di, ide-core-modules-2.6.15-1-amd64-generic-di
Description: IDE drivers
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.97
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.51
Description: Newt frontend for Debian Configuration Management System
Package: scsi-core-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: scsi-core-modules
Depends: kernel-image-2.6.15-1-amd64-generic-di
Description: Core SCSI subsystem
Package: ide-core-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: ide-core-modules
Depends: kernel-image-2.6.15-1-amd64-generic-di
Description: IDE support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-2
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.29
Description: Skeleton root filesystem used by debian-installer
Package: firewire-core-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.15-1-amd64-generic-di, kernel-image-2.6.15-1-amd64-generic-di
Description: Core FireWire drivers
Package: pcmcia-storage-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.15-1-amd64-generic-di, ide-core-modules-2.6.15-1-amd64-generic-di, cdrom-core-modules-2.6.15-1-amd64-generic-di, pcmcia-modules-2.6.15-1-amd64-generic-di
Description: PCMCIA storage drivers
Package: udev-udeb
Status: install ok unpacked
Version: 0.085-1
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon
Package: firmware-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: firmware-modules
Depends: kernel-image-2.6.15-1-amd64-generic-di
Description: Firmware request modules
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-1
Depends: libc-udeb
Description: Free Implementation of the Unicode BiDi algorithm
Package: floppy-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: floppy-modules
Depends: kernel-image-2.6.15-1-amd64-generic-di
Description: Floppy driver
Package: rescue-check
Status: install ok unpacked
Version: 1.3
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.3.10-2
Provides: editor
Depends: libc-udeb, libslang2-udeb
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.97
Provides: debconf-2.0
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.38), libtextwrap1 (>> 0.01-0)
Description: Debian Configuration Management System (C-implementation)
Package: load-cdrom
Status: install ok installed
Version: 1.08
Depends: cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 14
Package: usb-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: usb-modules
Depends: kernel-image-2.6.15-1-amd64-generic-di
Description: USB support
Package: fat-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: fat-modules
Depends: kernel-image-2.6.15-1-amd64-generic-di
Description: FAT filesystem support
Package: scsi-common-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: scsi-common-modules
Depends: kernel-image-2.6.15-1-amd64-generic-di, scsi-core-modules-2.6.15-1-amd64-generic-di, cdrom-core-modules-2.6.15-1-amd64-generic-di
Description: Very common SCSI drivers
Package: iso-3166-udeb
Status: install ok installed
Version: 0.49-1
Description: provides iso_3166.tab file
Package: sata-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: sata-modules
Depends: kernel-image-2.6.15-1-amd64-generic-di, scsi-core-modules-2.6.15-1-amd64-generic-di
Description: SATA drivers
Package: floppy-retriever
Status: install ok unpacked
Version: 1.08
Provides: retriever
Depends: mountfloppy
Description: Fetches modules from a floppy
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.01-4
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.14.1
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: pcmcia-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: pcmcia-modules
Depends: kernel-image-2.6.15-1-amd64-generic-di, firmware-modules-2.6.15-1-amd64-generic-di
Description: Common PCMCIA drivers
Package: archdetect
Status: install ok installed
Version: 1.33
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.38)
Description: Hardware architecture detector
Package: input-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: input-modules
Depends: kernel-image-2.6.15-1-amd64-generic-di, usb-modules-2.6.15-1-amd64-generic-di
Description: Input devices support
Package: kernel-image-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: save-logs
Status: install ok unpacked
Version: 2.12
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: parport-modules-2.6.15-1-amd64-generic-di
Status: install ok unpacked
Version: 1.7
Provides: parport-modules
Depends: kernel-image-2.6.15-1-amd64-generic-di
Description: Parallel port support
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.23
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.21
Depends: cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 012-4
Depends: udev-udeb, libc6 (>= 2.3.5-1), libsysfs1
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.1.11-15.3
Depends: libc6 (>= 2.3.5-1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2002.12.04dbs-52.2
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.23
Description: Terminfo entries needed by newt/slang in debian installer
Package: hw-detect
Status: install ok installed
Version: 1.33
Depends: rootskel (>= 0.54), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.15)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.23
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.36), console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.38
Provides: libdebian-installer4
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.14.1
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.5
Depends: di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.97
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: file-preseed
Status: install ok unpacked
Version: 1.14.1
Depends: di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: libsysfs1-udeb
Status: install ok unpacked
Version: 1.3.0-7
Provides: libsysfs1
Depends: libc6 (>= 2.3.5-1)
Description: interface library to sysfs
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.97
Provides: libdebconfclient0
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.4
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: cdrom-detect
Status: install ok installed
Version: 1.12
Depends: hw-detect, di-utils (>= 1.15)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 14
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20060304
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.6
Depends: cdrom-detect
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.6
Depends: choose-mirror
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.6
Depends: apt-mirror-setup
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 476
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.49
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.38), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: bugreporter-udeb
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 84
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.02
Description: Save logs and configuration to floppy for debug purposes
Make it possible to debug broken installation by saving the current
logs and configuration to floppy.
Installer-Menu-Item: 940
Package: choose-mirror
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 200
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.38), configured-network
Description: Choose mirror to install from
Installer-Menu-Item: 23
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.8
Depends: os-prober, tzsetup-udeb, mounted-partitions
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.15-1-amd64-generic-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: kernel-image-2.6.15-1-amd64-generic-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 224
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 160
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.23
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.38)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 404
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.38+1.39-WIP-2005.12.31-1
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: ethdetect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 84
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: ethernet-card-detection
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 15
Package: ext3-modules-2.6.15-1-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 316
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: kernel-image-2.6.15-1-amd64-generic-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 176
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-6
Depends: libc6 (>= 2.3.5-1)
Description: Partition a hard drive (manual)
fdisk package
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.15-1-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: kernel-image-2.6.15-1-amd64-generic-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1000
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.8-1
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 48
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.38+1.39-WIP-2005.12.31-1
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 2120
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.5-13
Provides: libc6, libc-udeb, glibc-2.3.5-3
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.01-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 44
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.01.04-2
Depends: libc6 (>= 2.3.5-1)
Provides: libdevmapper1.01
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libiw28-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Guus Sliepen <guus@debian.org>
Version: 27+28pre14-1
Provides: libiw28
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: libparted1.6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 344
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.6.25.1-2
Depends: libc6 (>= 2.3.5-1), libuuid1
Provides: libparted1.6-13
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.38+1.39-WIP-2005.12.31-1
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 172
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.15
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-modules-2.6.15-1-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 56
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: kernel-image-2.6.15-1-amd64-generic-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 492
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.01.04-5
Depends: libc6 (>= 2.3.2.ds1-21), libdevmapper1.01
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: lvmcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: cdebconf-udeb, md-modules, lvm2-udeb, parted-udeb, di-utils (>= 1.15)
Description: lvmcfg without the main menu item
Package: md-modules-2.6.15-1-amd64-generic-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 404
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: kernel-image-2.6.15-1-amd64-generic-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 120
Maintainer: Debian/Ubuntu mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 1.12.0-1
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux md device arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
devices.
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 312
Maintainer: Paul Fleischer <proguy@proguy.dk>
Version: 1.14
Depends: cdebconf-udeb, md-modules, mdadm-udeb, partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 172
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-1
Depends: libc6 (>= 2.3.2.ds1-4), libuuid1
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: netcfg
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 668
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.23
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.37), libiw28-udeb, cdebconf-udeb, dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Provides: configured-network
Description: Configure the network
To install additional installer components or the Debian Base System over
the network, you need to configure the network in the installer. This
component will first try to configure your network with DHCP and ask
you for static network configuration if this fails. The configured
network settings will be copied to your newly installed system.
Installer-Menu-Item: 18
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14.1
Depends: configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.15-1-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: kernel-image-2.6.15-1-amd64-generic-di, nic-shared-modules-2.6.15-1-amd64-generic-di, firmware-modules-2.6.15-1-amd64-generic-di, crc-modules-2.6.15-1-amd64-generic-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.15-1-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 568
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: kernel-image-2.6.15-1-amd64-generic-di, nic-shared-modules-2.6.15-1-amd64-generic-di, firmware-modules-2.6.15-1-amd64-generic-di, firewire-core-modules-2.6.15-1-amd64-generic-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.15-1-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: kernel-image-2.6.15-1-amd64-generic-di, nic-shared-modules-2.6.15-1-amd64-generic-di, nic-extra-modules-2.6.15-1-amd64-generic-di, pcmcia-modules-2.6.15-1-amd64-generic-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.15-1-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: kernel-image-2.6.15-1-amd64-generic-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.15-1-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 212
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: kernel-image-2.6.15-1-amd64-generic-di, nic-shared-modules-2.6.15-1-amd64-generic-di, usb-modules-2.6.15-1-amd64-generic-di, firmware-modules-2.6.15-1-amd64-generic-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 112
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.07
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfstools-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 152
Maintainer: David MartÃnez Moreno <ender@debian.org>
Version: 1.12.1-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.12
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.38), libparted1.6-13 (>= 1.6.24), libparted1.6-udeb
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.6.25.1-2
Depends: libc6 (>= 2.3.5-1), libparted1.6-13 (>= 1.6.24)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 264
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 88
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-base (>= 73), partman-auto (>= 46), partman-lvm, di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 772
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 78.1
Depends: libc6 (>= 2.3.5-1), libparted1.6-13 (>= 1.6.24), libparted1.6-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 508
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 120
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 200
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 40
Depends: e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 16
Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: lvmcfg-utils, lvm2-udeb, partman-base (>= 73), di-utils (>= 1.14)
Description: Add to partman support for LVM
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 140
Maintainer: Paul Fleischer <proguy@proguy.dk>
Version: 23
Depends: mdadm-udeb, mdcfg-utils, partman-base (>= 73)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 38
Depends: ntfstools-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 204
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 42
Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 200
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 28
Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 268
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-6
Description: PCMCIA Card Services for Linux (udeb)
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 24
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.05
Depends: apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: prebaseconfig
Status: install ok half-configured
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.15
Depends: archdetect, base-installer, created-fstab, bootable-system
Description: Finish the installation and reboot
finish the installation and reboot
Installer-Menu-Item: 78
Package: reiserfs-modules-2.6.15-1-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: kernel-image-2.6.15-1-amd64-generic-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.15-1-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1556
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: scsi-modules-2.6.15-1-amd64-generic-di, scsi-core-modules-2.6.15-1-amd64-generic-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.8
Depends: localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 192
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.0
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Guus Sliepen <guus@debian.org>
Version: 27+28pre14-1
Depends: libiw28-udeb (= 27+28pre14-1)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.15-1-amd64-generic-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 688
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: kernel-image-2.6.15-1-amd64-generic-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 268
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.7.7-1
Depends: libc6 (>= 2.3.5-1), libuuid1
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.15-1-amd64-generic-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: kernel-image-2.6.15-1-amd64-generic-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.15-1-amd64-generic-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: kernel-image-2.6.15-1-amd64-generic-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing'), (50, 'unstable')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15-1-amd64-generic
Locale: LANG=nl_BE.UTF-8, LC_CTYPE=nl_BE.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii reportbug 3.20 reports bugs in the Debian distrib
-- no debconf information
--
Little known fact about Middle Earth: The Hobbits had a very sophisticated
computer network! It was a Tolkien Ring...
--- End Message ---