[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#352820: marked as done (Installation Report Etch AMD64)



Your message dated Wed, 08 Sep 2010 03:58:10 +0000
with message-id <E1OtBnW-00054x-KO@ravel.debian.org>
and subject line Closing old installation report #352820
has caused the Debian Bug report #352820,
regarding Installation Report Etch AMD64
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
352820: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=352820
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports

Version: Etch amd64, Daily Builds


Boot method: CD
Image version: debian-testing-amd64-netinst.iso (http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso) downloaded february 13th 2006
Date: february 14th 2006

Machine: NEC Powermate - F - ML7
Processor: Intel PIV with EM64T 3GHz
Memory: 1 Go
Partitions:
# df -Tl
Sys. de fich. Type    1K-blocs       Occupé Disponible Capacité Monté sur
/dev/sda1     ext3    73987644   2068324  68160916   3% /
tmpfs        tmpfs      508640         0    508640   0% /dev/shm
tmpfs        tmpfs       10240       696      9544   7% /dev

Output of lspci and lspci -n:
# lspci
0000:00:00.0 Host bridge: Intel Corp. 915G/P/GV Processor to I/O Controller (rev 04) 0000:00:02.0 VGA compatible controller: Intel Corp. 82915G Express Chipset Family Graphics Controller (rev 04) 0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) 0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) 0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) 0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) 0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d4)
0000:00:1e.2 Multimedia audio controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04) 0000:00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 04) 0000:00:1f.2 IDE interface: Intel Corp. 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 04) 0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) 0000:01:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
# lspci -n
0000:00:00.0 0600: 8086:2580 (rev 04)
0000:00:02.0 0300: 8086:2582 (rev 04)
0000:00:1d.0 0c03: 8086:2658 (rev 04)
0000:00:1d.1 0c03: 8086:2659 (rev 04)
0000:00:1d.2 0c03: 8086:265a (rev 04)
0000:00:1d.3 0c03: 8086:265b (rev 04)
0000:00:1d.7 0c03: 8086:265c (rev 04)
0000:00:1e.0 0604: 8086:244e (rev d4)
0000:00:1e.2 0401: 8086:266e (rev 04)
0000:00:1f.0 0601: 8086:2640 (rev 04)
0000:00:1f.2 0101: 8086:2651 (rev 04)
0000:00:1f.3 0c05: 8086:266a (rev 04)
0000:01:0c.0 0200: 10ec:8169 (rev 10)


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [E]
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Create file systems:    [ ]
Mount partitions:       [ ]
Install base system:    [ ]
Install boot loader:    [ ]
Reboot:                 [ ]

Comments/Problems:

Like describe in errata (*SATA driver can block access to CD drive in installations from CD*) http://www.debian.org/releases/stable/debian-installer/, I tryed to select only ide-generic, ide-cd and isofs. With Sarge, i have to do this but there is a "generic" and an "ide-generic", the CD is detected with "generic".
With Etch, there is only "ide-generic", the CD is not detected.



--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
  Installer.
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful


The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.



--- End Message ---

Reply to: