Bug#351992: marked as done (Installation error)
Your message dated Wed, 08 Sep 2010 03:58:10 +0000
with message-id <E1OtBnW-00054T-Dg@ravel.debian.org>
and subject line Closing old installation report #351992
has caused the Debian Bug report #351992,
regarding Installation error
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)
--
351992: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=351992
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Boot method: daily build netinstall cd
Image version: debian-testing-i386-netinst.iso
Date: 8 February 2006 around 1600 EST
Machine: Dell Inspiron 6000
Processor: Centrino (unsure of speed)
Memory: 512MB
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/hda2 ext3 19228308 1972532 16279024 11% /
tmpfs tmpfs 258124
0 258124 0% /dev/shm
Output of lspci and lspci -n:
beauty:~# lspci
0000:00:00.0 Host bridge: Intel Corp. Mobile Memory Controller Hub (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. Mobile Memory Controller Hub PCI
Express Port (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3)
0000:00:1e.2 Multimedia audio controller: Intel Corp.
82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
0000:00:1e.3 Modem: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
AC'97 Modem Controller (rev 03)
0000:00:1f.0 ISA bridge: Intel Corp. 82801FBM (ICH6M) LPC Interface
Bridge (rev 03)
0000:00:1f.2 IDE interface: Intel Corp. 82801FBM (ICH6M) SATA
Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown
device 5460
0000:03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0
100Base-TX (rev 02)
0000:03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
0000:03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394
Controller (rev 08)
0000:03:01.2 0805: Ricoh Co Ltd: Unknown device 0822 (rev 17)
0000:03:03.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
beauty:~# lspci -n
0000:00:00.0 0600: 8086:2590 (rev 03)
0000:00:01.0 0604: 8086:2591 (rev 03)
0000:00:1d.0 0c03: 8086:2658 (rev 03)
0000:00:1d.1 0c03: 8086:2659 (rev 03)
0000:00:1d.2 0c03: 8086:265a (rev 03)
0000:00:1d.3 0c03: 8086:265b (rev 03)
0000:00:1d.7 0c03: 8086:265c (rev 03)
0000:00:1e.0 0604: 8086:2448 (rev d3)
0000:00:1e.2 0401: 8086:266e (rev 03)
0000:00:1e.3 0703: 8086:266d (rev 03)
0000:00:1f.0 0601: 8086:2641 (rev 03)
0000:00:1f.2 0101: 8086:2653 (rev 03)
0000:01:00.0 0300: 1002:5460
0000:03:00.0 0200: 14e4:170c (rev 02)
0000:03:01.0 0607: 1180:0476 (rev b3)
0000:03:01.1 0c00: 1180:0552 (rev 08)
0000:03:01.2 0805: 1180:0822 (rev 17)
0000:03:03.0 0280: 8086:4220 (rev 05)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [o ]
Configure network HW: [ o]
Config network: [o ]
Detect CD: [o ]
Load installer modules: [ o]
Detect hard drives: [E ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
Tried to install using the netinstall disk from the testing page, per
recomendation from the response to bug#35194. Only got as far as mounting the
cd-rom. The disk said there were no drivers for the cd rom.
I tried every driver on the list and got the same error. The cd
rom is a Philips cdrw/dvd scb5265.
Stephanie
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---
Reply to: