[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#344268: marked as done (installation reports: d-i cannot detect CDROM in Dell Inspiron 9300)



Your message dated Wed, 08 Sep 2010 03:58:08 +0000
with message-id <E1OtBnU-00050V-G4@ravel.debian.org>
and subject line Closing old installation report #344268
has caused the Debian Bug report #344268,
regarding installation reports: d-i cannot detect CDROM in Dell Inspiron 9300
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
344268: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=344268
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Severity: normal

INSTALL REPORT

d-i cannot detect the CDROM on a DELL Inspiron 9300.

Debian-installer-version: 
debian-testing-i386-netinst.iso fetched at 2005-12-20 from
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/

uname -a: 
Linux debian 2.6.14-2-386 #2 Fri Dec 9 10:02:52 UTC 2005 i686 unknown

Date:
Wed, 21 Dec 2005 10:10:24 +0100

Method:

Machine: Dell Inspiron 9300

Processor:
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 13
model name      : Intel(R) Pentium(R) M processor 1.86GHz
stepping        : 8
cpu MHz         : 1862.781
cache size      : 2048 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx est tm2
bogomips        : 3678.20

Memory: 1024Mb

Root Device: 
ata_piix SATA 60Mb
# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: TOSHIBA MK6026GA Rev: PA20
  Type:   Direct-Access                    ANSI SCSI revision: 05

Root Size/partition table: N/A

Output of (lspci, lspci -n)|sort from Ubuntu Breezy:
0000:00:00.0 0600: 8086:2590 (rev 03)
0000:00:00.0 Host bridge: Intel Corp. Mobile Memory Controller Hub (rev 03)
0000:00:01.0 0604: 8086:2591 (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. Mobile Memory Controller Hub PCI Express
Port (rev 03)
0000:00:1d.0 0c03: 8086:2658 (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
UHCI #1 (rev 03)
0000:00:1d.1 0c03: 8086:2659 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
UHCI #2 (rev 03)
0000:00:1d.2 0c03: 8086:265a (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
UHCI #3 (rev 03)
0000:00:1d.3 0c03: 8086:265b (rev 03)
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
UHCI #4 (rev 03)
0000:00:1d.7 0c03: 8086:265c (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB2 EHCI Controller (rev 03)
0000:00:1e.0 0604: 8086:2448 (rev d3)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3)
0000:00:1e.2 0401: 8086:266e (rev 03)
0000:00:1e.2 Multimedia audio controller: Intel Corp. 82801FB/FBM/FR/FW/FRW
(ICH6 Family) AC'97 Audio Controller (rev 03)
0000:00:1e.3 0703: 8086:266d (rev 03)
0000:00:1e.3 Modem: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem
Controller (rev 03)
0000:00:1f.0 0601: 8086:2641 (rev 03)
0000:00:1f.0 ISA bridge: Intel Corp. 82801FBM (ICH6M) LPC Interface Bridge (rev
03)
0000:00:1f.2 0101: 8086:2653 (rev 03)
0000:00:1f.2 IDE interface: Intel Corp. 82801FBM (ICH6M) SATA Controller (rev
03)
0000:00:1f.3 0c05: 8086:266a (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus
Controller (rev 03)
0000:01:00.0 0300: 10de:00c8 (rev a2)
0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 00c8
(rev a2)
0000:03:00.0 0200: 14e4:170c (rev 02)
0000:03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX
(rev 02)
0000:03:01.0 0607: 1180:0476 (rev b3)
0000:03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
0000:03:01.1 0c00: 1180:0552 (rev 08)
0000:03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev
08)
0000:03:01.2 0805: 1180:0822 (rev 17)
0000:03:01.2 0805: Ricoh Co Ltd: Unknown device 0822 (rev 17)
0000:03:03.0 0280: 8086:4220 (rev 05)
0000:03:03.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [E]
Load installer modules: [ ]
Detect hard drives:     [O] HD detected before language selection
Partition hard drives:  [ ]
Create file systems:    [ ]
Mount partitions:       [ ]
Install base system:    [ ]
Install boot loader:    [ ]
Reboot:                 [ ]

Comments/Problems:

As stated before d-i cannot detect de CDROM. However Ubuntu Hoary (2.6.10) and
Breezy installers works fine. 

HD is detected at a very early stage, before any user interaction, both sata 
controllers are detected, see dmesg output below.

Comparing lsmod output from d-i and Ubuntu,see below. I found that the module
loading order is diferent. Ubuntu loads ata_piix before pcmcia and ieee1394, 
don't know if this is important so, I've tried booting with 
hw-detect/start_pcmcia=false, debian-installer/probe/usb=false and desperatly
debian-installer/probe/pcmcia=false with no luck. Maybe ata_piix in d-i is
diferent to Ubuntu?.

Output of lsmod:
Module                  Size  Used by
ide_cd                 39300  0 
sr_mod                 17188  0 
cdrom                  36896  2 ide_cd,sr_mod
sd_mod                 18192  2 
generic                 4612  0 [permanent]
ide_core              119772  2 ide_cd,generic
ahci                   12036  0 
vga16fb                12616  2 
vgastate                9856  1 vga16fb
usbhid                 36192  0 
usbkbd                  6784  0 
thermal                13576  0 
processor              23100  1 thermal
fan                     4868  0 
ata_piix                9476  1 
libata                 45960  2 ahci,ata_piix
ohci1394               32820  0 
ieee1394               93112  1 ohci1394
yenta_socket           25612  0 
rsrc_nonstatic         12800  1 yenta_socket
pcmcia_core            39440  2 yenta_socket,rsrc_nonstatic
ehci_hcd               32392  0 
scsi_mod              132200  4 sr_mod,sd_mod,ahci,libata
uhci_hcd               30736  0 
usbcore               114688  5 usbhid,usbkbd,ehci_hcd,uhci_hcd

lsmod output booting with Ubuntu Breezy:
Module                  Size  Used by
fbcon                  34176  68 
tileblit                2560  1 fbcon
font                    8448  1 fbcon
bitblit                 5248  1 fbcon
vga16fb                12232  2 
vgastate                8320  1 vga16fb
vesafb                  8088  0 
cfbcopyarea             4480  2 vga16fb,vesafb
cfbimgblt               2944  2 vga16fb,vesafb
cfbfillrect             3840  2 vga16fb,vesafb
softcursor              2432  2 vga16fb,vesafb
usbserial              26984  0 
usbkbd                  6784  0 
thermal                13192  0 
processor              23100  1 thermal
fan                     4740  0 
mousedev               10912  0 
usb_storage            64704  0 
usbhid                 30688  0 
ide_core              125268  1 usb_storage
sg                     33696  0 
sr_mod                 15652  0 
cdrom                  33952  1 sr_mod
ohci1394               30644  0 
ieee1394               90936  1 ohci1394
sd_mod                 17424  2 
yenta_socket           22540  0 
rsrc_nonstatic         12032  1 yenta_socket
pcmcia_core            44932  2 yenta_socket,rsrc_nonstatic
ahci                   11268  0 
ata_piix                9476  1 
libata                 47876  2 ahci,ata_piix
scsi_mod              124872  6 usb_storage,sg,sr_mod,sd_mod,ahci,libata
ehci_hcd               29448  0 
uhci_hcd               28048  0 
usbcore               104188  7
usbserial,usbkbd,usb_storage,usbhid,ehci_hcd,uhci_hcd
evdev                   9088  0 
unix                   24624  8 

Contents of /proc/scsi/scsi booting with Ubuntu Breezy (2.6.12-9-686):
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: TOSHIBA MK6026GA Rev: PA20
  Type:   Direct-Access                    ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: SONY     Model: DVD+-RW DW-D56A  Rev: PDS7
  Type:   CD-ROM                           ANSI SCSI revision: 05

Output of dmesg (just before language selection):
pnp: 00:07: ioport range 0x900-0x90f has been reserved
pnp: 00:07: ioport range 0x910-0x91f has been reserved
pnp: 00:07: ioport range 0x920-0x92f has been reserved
pnp: 00:07: ioport range 0x930-0x93f has been reserved
pnp: 00:07: ioport range 0x940-0x97f has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: dd000000-dfefffff
  PREFETCH window: c0000000-cfffffff
PCI: Bus 4, cardbus bridge: 0000:03:01.0
  IO window: 00002000-000020ff
  IO window: 00002400-000024ff
  PREFETCH window: 50000000-51ffffff
  MEM window: 52000000-53ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 2000-2fff
  MEM window: dcf00000-dcffffff
  PREFETCH window: 50000000-51ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 177
Simple Boot Flag at 0x79 set to 0x1
audit: initializing netlink socket (disabled)
audit(1135109103.500:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 17 (level, low) -> IRQ 201
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 11412K size 1024 blocksize
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
EISA: Detected 0 cards.
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
ACPI wakeup devices: 
 LID PBTN PCI0 USB0 USB1 USB2 USB4 USB3 MODM PCIE 
ACPI: (supports S0 S3 S4 S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 240k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 169, io base 0x0000bf80
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI subsystem initialized
ieee1394: Initialized config rom entry `ip1394'
libata version 1.12 loaded.
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 201, io base 0x0000bf60
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THM] (46 C)
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 209, io base 0x0000bf40
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 177, io base 0x0000bf20
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: irq 169, io mem 0xffa80800
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 177
Yenta: CardBus bridge found at 0000:03:01.0 [1028:0189]
ata_piix version 1.04
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
Yenta: ISA IRQ mask 0x04b8, PCI irq 177
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
cs: IO port probe 0x2000-0x2fff: clean.
pcmcia: parent PCI bridge Memory window: 0xdcf00000 - 0xdcffffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 209
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[209]  MMIO=[dcffc800-dcffcfff] 
Max Packet=[2048]
ata1: dev 0 cfg 49:2f00 82:7c6b 83:5b08 84:4003 85:7c69 86:1a08 87:4003 88:203f
ata1: dev 0 ATA, max UDMA/100, 117210240 sectors:
ata1(0): applying bridge limits
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
  Vendor: ATA       Model: TOSHIBA MK6026GA  Rev: PA20
  Type:   Direct-Access                      ANSI SCSI revision: 05
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
usbcore: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
ata2: dev 0 cfg 49:0b00 82:0210 83:1000 84:0000 85:0000 86:0000 87:0000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[344fc0002dc9d030]





--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
  Installer.
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful


The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.



--- End Message ---

Reply to: