[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#339667: marked as done (Package: installation-reports)

Your message dated Wed, 08 Sep 2010 03:58:07 +0000
with message-id <E1OtBnT-0004wq-4D@ravel.debian.org>
and subject line Closing old installation report #339667
has caused the Debian Bug report #339667,
regarding Package: installation-reports
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
339667: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=339667
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports
Debian-installer-version: 2005/11/17 - http://cdimage.debian.org/pub/ cdimage-testing/etch_d-i/powerpc/beta1/debian-testing-powerpc- netinst.iso uname -a: Linux powermac 2.6.12-1-powerpc64 #1 SMP Tue Sep 27 15:20:16 UTC 2005 ppc64 unknown 
Date: 2005/11/17 - 21:15 GMT+1
Method: Net Install CD Image - install64

Machine: PowerMac7,3 - Power Mac G5
Processor: PowerPC G5  (3.1) - 2x2.7GHz
Memory: 2GB DDR SDRAM (PC3200U-30330)
Root Device: Serial-ATA - 200GB (disk1s3) / 400GB (disk0s3)
Root Size/partition table:

SCSI (0,0,0) (sda) - 200.0 GB ATA ST3200826AS
#1	32.3	kB					Apple
	134.2	MB	FREE SPACE
#3	99.9	GB	hfs+				Apple_HFS_Un
#2	1.0		MB					Untitled
#2	280.0	MB	ext3				Untitled
#2	5.0		GB	ext3				Untitled
#2	3.0		GB	ext3				Untitled
#2	6.1		GB	swap			swap				swap
#2	400.0	MB	ext3				Untitled
#2	85.3	GB	ext3				Untitled

SCSI (0,0,0) (sdb) - 400.1 GB ATA Hitachi HDS72404
#1	32.3	kB					Apple
	134.2	MB	FREE SPACE
#3	400.0	GB	hfs+				Apple_HFS_Un
	8.2		kB	FREE SPACE

Output of lspci and lspci -n: Command not found

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [E]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [E]
Reboot:                 [E]

Comments/Problems:

### Network:
dhclient: Listening on LPF/eth0/00:0d:93:64:88
dhclient: Sending on LPF/eth0/00:0d:93:64:88
dhclient: Sending on Socket/fallback/fallback-net
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16

Airport Extreme Card doesn't seem to work.
Network Configuration is working when I plug an ethernet cable.

### Yaboot:
yaboot-installer: debug: mapped: /dev/sdb3
kernel: ioctl32(nvsetenv:18409): Unknown cmd fd(7) cmd(20007043){' '} arg(00000000) on /dev/nvram yaboot-installer: mkofboot: Finding OpenFirmware device path to '/dev/ sda2'... yaboot-installer: ofpath: /proc/device-tree is broken. Do not use BootX to boot, use yaboot. yaboot-installer: mkofboot: Unable to find OpenFirmware path for boot=/dev/sda2 yaboot-installer: mkofboot: Please add ofboot=<path> where <path> is the OpenFirmware path to /dev/sda2 to /etc/yaboot.conf yaboot-installer: mkofboot: Finding OpenFirmware device path to '/dev/ sdb3'... yaboot-installer: ofpath: /proc/device-tree is broken. Do not use BootX to boot, use yaboot. yaboot-installer: mkofboot: Unable to find OpenFirmware path for macosx=/dev/sdb3 yaboot-installer: mkofboot: Try specifying the real OpenFirmware path for macosx=/dev/sdb3 in /etc/yaboot.conf 
yaboot-installer: error: mkofboot failed with exit status 1

### Misc:
Unfortunately, I'm not into low-level programming, but I can help, if needed, by testing on my hardware configuration. So if you need some kind of tests with such a configuration, don't hesitate to contact me. 
Thanx a lot for your work : )

--
Jean-David Gadina (macmade)
www.gadlab.net - Multimedia Network

--- End Message ---
--- Begin Message --- 
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
  Installer.
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful


The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.

--- End Message ---
Reply to: