[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#337555: marked as done (Package: installation-reports)



Your message dated Wed, 08 Sep 2010 03:58:06 +0000
with message-id <E1OtBnS-0004v4-9G@ravel.debian.org>
and subject line Closing old installation report #337555
has caused the Debian Bug report #337555,
regarding Package: installation-reports
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
337555: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=337555
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports

Debian-installer-version: http://amd64.debian.net/debian-installer/daily/netboot/mini.iso 03.11.05
uname -a: Linux mobil 2.6.12-1-amd64-generic #1 Wed Sep 28 02:05:15 CEST 2005 x86_64 GNU/Linux 
Date: 03.11.2005 18:00 CET
Method: Network installation based on mini.iso image on CDROM
Machine: HP Compaq nx6125 Business Notebook-PC
Processor: AMD Turion64 ML-34 1.8GHz
Memory: 1GB
Root Device: IDE /dev/hda
Root Size/partition table:
fdisk -l /dev/hda:
Disk /dev/hda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1        3824    30716248+   7  HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/hda2            3825        3840      128520   83  Linux
/dev/hda3            3841        4083     1951897+  82  Linux swap / Solaris
less /etc/fstab:
# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
/dev/hda4       /               ext3    defaults,errors=remount-ro 0       1
/dev/hda2       /boot           ext3    defaults        0       2
/dev/hda3       none            swap    sw              0       0
/dev/hdc        /media/cdrom0   udf,iso9660 ro,user,noauto  0       0
Output of lspci and lspci -n:
lspci:
0000:00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
0000:00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f
0000:00:04.0 PCI bridge: ATI Technologies Inc: Unknown device 5a36
0000:00:05.0 PCI bridge: ATI Technologies Inc: Unknown device 5a37
0000:00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
0000:00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
0000:00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
0000:00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
0000:00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI
0000:00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
0000:00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
0000:00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
0000:00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 02)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
0000:01:05.0 VGA compatible controller: ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)
0000:02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
0000:02:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
0000:02:04.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
0000:02:04.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Ho
st Controller
lspci -n:
0000:00:00.0 0600: 1002:5950 (rev 01)
0000:00:01.0 0604: 1002:5a3f
0000:00:04.0 0604: 1002:5a36
0000:00:05.0 0604: 1002:5a37
0000:00:13.0 0c03: 1002:4374
0000:00:13.1 0c03: 1002:4375
0000:00:13.2 0c03: 1002:4373
0000:00:14.0 0c05: 1002:4372 (rev 11)
0000:00:14.1 0101: 1002:4376
0000:00:14.3 0601: 1002:4377
0000:00:14.4 0604: 1002:4371
0000:00:14.5 0401: 1002:4370 (rev 02)
0000:00:14.6 0703: 1002:4378 (rev 02)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:05.0 0300: 1002:5955
0000:02:01.0 0200: 14e4:169c (rev 03)
0000:02:02.0 0280: 14e4:4318 (rev 02)
0000:02:04.0 0607: 104c:8031
0000:02:04.2 0c00: 104c:8032
0000:02:04.3 0180: 104c:8033
0000:02:04.4 0805: 104c:8034
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: 		[O]
Configure network HW:	[O]
Config network:		[O]
Select Mirror:			[O]
Load installer modules:	[O]
Detect hard drives:		[O]
Partition hard drives:	[O]
Create file systems:	[O]
Mount partitions:		[O]
Install base system:	[O]
Install boot loader:		[O]
Reboot:				[O]
Comments/Problems:
Boot-Option:
linux vga=0x343

Tasksel:
[*] Laptop
[*] Standard System

Error messages in /var/log/boot:
...
All modules loaded.
Setting the System Clock using the Hardware Clock as referencemodprobe: WARNING: Error inserting genrtc (/lib/modules/2.6.12-1-amd64-generic/kernel/drivers/char/genrtc.ko): Device or resource busy
...
Starting hotplug subsystem:
pci
modprobe: FATAL: Error inserting shpchp (/lib/modules/2.6.12-1-amd64-generic/kernel/drivers/pci/hotplug/shpchp.ko): Operation not permitted
shpchp: can't be loaded
missing kernel or user mode driver shpchp
...
done.
^[[33m*^[[39;49m /etc/network/options is deprecated.
...
Starting portmap daemon: portmap.
^[]RSetting up general console font... Setting up per-VC ACM's: /dev/tty1 (iso15), /dev/tty2 (iso15), /dev/tty3 (iso15), /dev/tty4 (iso15), /dev/tty5 (iso15), /dev/tty6 (iso15), done.
^[[9;30]^[[14;30]Setting the System Clock using the Hardware Clock as reference
...
What to do?

Tasksel again:
[*] Desktop-Environment doesn't work because of unmet dependencies for gnome-desktop-environment, kde and gnome.
What could i do to install the desktop environment?

I hope this helps for further development. If you need further information, feel free to ask.

Regards

Martin Krieger


--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
  Installer.
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful


The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.



--- End Message ---

Reply to: