--- Begin Message ---
Package: installation-reports
Debian-installer-version: Tue, Oct 25 2005, Debian testing network
installation CD from
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/current/debian-testing-i386-netinst.iso
uname -a: Linux (none) 2.6.12-1-386 #1 Tue Sep 27 12:41:08 JST 2005
i686 unknown
Date: Wed Oct 26 about 8:00 GMT
Method: To start I've used a bootable CD. Network installation from Cracow,
Poland, from student hostel with 10Mbit Internet connection with no
proxy.
Machine: IBM PC 300PL
Processor: Pentium II 400 MHz
Memory: 192 MB SDRAM in 2 banks, 1st is Siemens 128MB unbuffered
without ECC and 64bit width, 2nd - Toshiba 64MB unbuffered with ECC,
72bit width.
Root Device: IDE Hitachi Deskstar HDS728080PLAT20
Root Size/partition table:
1 main 16.4MB ext2 /boot
2 main 10GB B ntfs
3 main 6.5GB reiserfs /
5 log 501.7MB swap
6 log 5GB ext3 /home
7 log 20GB fat32
8 log 40GB ntfs
Output of lspci and lspci -n:
Actully I've used Everest Home Edition, but it's quite same as lspci:
PCI Devices:
Bus 0, Device 18, Function 1 AVerMedia TV Series Device - Bt878 Audio Section
Bus 0, Device 18, Function 0 AVerMedia TV Series Device - Bt878 Video Section
Bus 0, Device 2, Function 1 Intel 82371AB/EB PIIX4 - IDE Controller
Bus 0, Device 2, Function 2 Intel 82371AB/EB PIIX4 - USB Host Controller
Bus 0, Device 2, Function 0 Intel 82371EB PCI ISA IDE Xcelerator 4 - PIIX4E [A-0]
Bus 0, Device 2, Function 3 Intel 82371EB PIIX4E - Power Management Controller [A-0]
Bus 0, Device 1, Function 0 Intel 82443BX/ZX AGP Controller [B-1]
Bus 0, Device 0, Function 0 Intel 82443BX/ZX Host Bridge/Controller [B-1]
Bus 0, Device 3, Function 0 Intel 82558 EtherExpress PRO/100B Adapter [A/B-0]
Bus 0, Device 16, Function 0 Matrox Millennium II Video Adapter
Bus 1, Device 1, Function 0 S3 Trio3D (86c365/86c366) Video Adapter
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [E]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
Sometimes I'm able to select one of four kernel's versions, sometimes
I can't. The same situation with a locales.
----------------------------------------------------------------------
INTERIA.PL | Kliknij po wiecej >>> http://link.interia.pl/f18c1
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---