[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#325780: marked as done (Package: installation-reports)



Your message dated Wed, 08 Sep 2010 03:58:03 +0000
with message-id <E1OtBnP-0004qI-Tt@ravel.debian.org>
and subject line Closing old installation report #325780
has caused the Debian Bug report #325780,
regarding Package: installation-reports
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
325780: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=325780
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Debian-installer-version:
/daily/i386/20050828/debian-testing-i386-netinst.iso 2005/08/29
uname -a: Linux dev-case-morphix 2.6.8-2-386 #1 Thu May 19 17:40:50
JST 2005 i686 GNU/Linux
Date: 2005/08/29 - 1800 GMT approx.
Method: Netinst.iso then ftp.uk.debian.org
Machine: Mini-itx Motherboard
Processor: VIA Samuel 2 - CentaurHauls
Memory: 512Mb
Root Device: IDE hdc
Root Size/partition table: outout of /proc/partitons:-
major minor  #blocks  name

  22     0    9820440 hdc
  22     1    2755116 hdc1
  22     2          1 hdc2
  22     5     345366 hdc5
  22     6    6715138 hdc6
/dev/hdc1 / ext3 rw,errors=remount-ro 0 0
proc /proc proc rw 0 0
sysfs /sys sysfs rw 0 0
devpts /dev/pts devpts rw,gid=5,mode=620 0 0
tmpfs /dev/shm tmpfs rw 0 0
/dev/hdc6 /home ext3 rw 0 0
usbfs /proc/bus/usb usbfs rw 0 0
tmpfs /dev tmpfs rw,size=10M,mode=0755 0 0


Output of lspci
Linux dev-case-morphix 2.6.8-2-386 #1 Thu May 19 17:40:50 JST 2005
i686 GNU/Linux
dev-case-morphix:/home/bms# lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
0000:00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394
Host Controller (rev 80)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102
[Rhine-II] (rev 74)
0000:01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623
[Apollo CLE266] integrated CastleRock graphics (rev 03)
 and lspci -n:
dev-case-morphix:/home/bms# lspci -n
0000:00:00.0 0600: 1106:3123
0000:00:01.0 0604: 1106:b091
0000:00:0d.0 0c00: 1106:3044 (rev 80)
0000:00:10.0 0c03: 1106:3038 (rev 80)
0000:00:10.1 0c03: 1106:3038 (rev 80)
0000:00:10.2 0c03: 1106:3038 (rev 80)
0000:00:10.3 0c03: 1106:3104 (rev 82)
0000:00:11.0 0601: 1106:3177
0000:00:11.1 0101: 1106:0571 (rev 06)
0000:00:11.5 0401: 1106:3059 (rev 50)
0000:00:12.0 0200: 1106:3065 (rev 74)
0000:01:00.0 0300: 1106:3122 (rev 03)


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [E]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [0]
Install base system:    [0]
Install boot loader:    [0]
Reboot:                 [O]

Comments/Problems:
After boot up base system I had to exit to shell and run the command
dhclient eth0

eth0 is the on-board ethernet. Connected to LAN with dhcp running,
with gateway to interweb.

Then resume installation at apt-configuration point.

Apart from that very nice install.  I still hae to run dhclient after boot-up.

Thanks,
Brendan M. Sleight -

p.s. real email me.spam@barwap._example_.com - remove example. to give
at barwap.com


--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
  Installer.
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful


The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.



--- End Message ---

Reply to: