[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#317452: marked as done (installation-reports: Serial ATA hard disk)

Your message dated Wed, 08 Sep 2010 03:58:01 +0000
with message-id <E1OtBnN-0004kq-7Y@ravel.debian.org>
and subject line Closing old installation report #317452
has caused the Debian Bug report #317452,
regarding installation-reports: Serial ATA hard disk
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
317452: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=317452
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

Debian-installer-version: Today downloaded image. URL:
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/20050706/debian-testing-i386-netinst.iso    
uname -a: Linux dhcppc7 2.6.8-2-386 #1 Thu May 19 17:40:50 JST 2005 i686 GNU/Linux
Date: fri 8 july 2005, 18:20
Method: 
  I'd used netinstall image. 
  On boot selected mode: expert26
  Other packages intalled from ftp.uk.debian.org (testing)
  No proxy

Machine: Clone
Processor: Pentium IV
Memory: 1 GB Kignston
Root Device: 120 GB Serial Ata

Root Size/partition table: 
  Device    Boot  Start   End    Blocks    Id System
/dev/sda1    *      1     851    6835626   83 Linux
/dev/sda2         852   14596  110406712+   5 Extended
/dev/sda5         852    1181    2650693+  82 Linux swap
/dev/sda6        1182   14596  107755956   83 Linux

Output of lspci :

0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4153
0000:01:00.1 Display controller: ATI Technologies Inc: Unknown device 4173
0000:02:09.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)

Output of lspci -n:

0000:00:00.0 0600: 8086:2570 (rev 02)
0000:00:01.0 0604: 8086:2571 (rev 02)
0000:00:1d.0 0c03: 8086:24d2 (rev 02)
0000:00:1d.1 0c03: 8086:24d4 (rev 02)
0000:00:1d.2 0c03: 8086:24d7 (rev 02)
0000:00:1d.3 0c03: 8086:24de (rev 02)
0000:00:1d.7 0c03: 8086:24dd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev c2)
0000:00:1f.0 0601: 8086:24d0 (rev 02)
0000:00:1f.2 0101: 8086:24d1 (rev 02)
0000:00:1f.3 0c05: 8086:24d3 (rev 02)
0000:00:1f.5 0401: 8086:24d5 (rev 02)
0000:01:00.0 0300: 1002:4153
0000:01:00.1 0380: 1002:4173
0000:02:09.0 0200: 11ab:4320 (rev 13)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:

In case on an installation using 'linux26' d-i can't load CD-ROM IDE module, so 
I've have to install using expert26 mode. As Frans Pop reagrds me, "Load _only_ general IDE modules that are needed for CD access: cdrom, 
ide-cd, isofs, generic." So I loaded only generic IDE module (the rest
are not loaded), so on this way d-i detect CD-ROM device and could
follow with the instalation process. On next steps it loads anothers
modules required by Serial ATA :)

Even testing uses 2.6.11 udebs, it let install 2.4 or 2.6.8 kernel versions (there is not 2.6.11 version)

Thanks and best regards,

Dooteo

--- End Message ---
--- Begin Message --- 
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
  Installer.
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful


The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.

--- End Message ---
Reply to: