--- Begin Message ---
Package: installation-reports
INSTALL REPORT
Debian-installer-version: 30/03/05
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc3/sarge-i386-netinst.iso
uname -a: Linux debian 2.6.8-2-686-smp #1 SMP Thu May 19 17:27:55 JST
2005 i686 GNU/Linux
Date: 01/04/05 15:10
Method: How did you install? Net-install What did you boot off? CD-ROM
If network
install, from where? http://ftp.it.debian.org Proxied? no
Machine: custom Desktop PC
Processor: Intel P4 3 GHz Prescott
Memory: 512 Mb
Root Device: SATA WD Raptor 37 Gb on ICH5R Intel controller (ASUS
P4C800E DL mobo)
Root Size/partition table: Sda1 root 36 Gb / Sda2 swap 1 Gb
Output of lspci and lspci -n:
fabry@debian:~$ lspci
0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller
(rev 02)
0000:00:03.0 PCI bridge: Intel Corp. 82875P Processor to PCI to CSA
Bridge (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge
(rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra
ATA 100 Storage Controller (rev 02)
0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150
Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller
(rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller (rev 02)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV 36
[GeForce 5700] (rev a1)
0000:02:01.0 Ethernet controller: Intel Corp. 82547EI Gigabit Ethernet
Controller (LOM)
0000:03:0d.0 Network controller: RaLink Wireless PCI Adpator RT2400 / RT2460
fabry@debian:~$ lspci -n
0000:00:00.0 0600: 8086:2578 (rev 02)
0000:00:01.0 0604: 8086:2579 (rev 02)
0000:00:03.0 0604: 8086:257b (rev 02)
0000:00:1d.0 0c03: 8086:24d2 (rev 02)
0000:00:1d.1 0c03: 8086:24d4 (rev 02)
0000:00:1d.2 0c03: 8086:24d7 (rev 02)
0000:00:1d.3 0c03: 8086:24de (rev 02)
0000:00:1d.7 0c03: 8086:24dd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev c2)
0000:00:1f.0 0601: 8086:24d0 (rev 02)
0000:00:1f.1 0101: 8086:24db (rev 02)
0000:00:1f.2 0101: 8086:24d1 (rev 02)
0000:00:1f.3 0c05: 8086:24d3 (rev 02)
0000:00:1f.5 0401: 8086:24d5 (rev 02)
0000:01:00.0 0300: 10de:0342 (rev a1)
0000:02:01.0 0200: 8086:1019
0000:03:0d.0 0280: 1814:0101
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [E] DCHP not work with ADSL over ethernet
interface eth0, needs manual configuration of pppoeconf
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O] without using tasksel
Install boot loader: [O]
Reboot: [O]
Comments/Problems: see upware
Install logs and other status info is available in
/var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org
Package: installation-reports
INSTALL REPORT
Debian-installer-version: 30/03/05 http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc3/sarge-i386-netinst.iso
uname -a: Linux debian 2.6.8-2-686-smp #1 SMP Thu May 19 17:27:55 JST 2005 i686 GNU/Linux
Date: 01/04/05 15:10
Method: How did you install? Net-install What did you boot off? CD-ROM If network
install, from where? http://ftp.it.debian.org Proxied? no
Machine: custom Desktop PC
Processor: Intel P4 3 GHz Prescott
Memory: 512 Mb
Root Device: SATA WD Raptor 37 Gb on ICH5R Intel controller (ASUS P4C800E DL mobo)
Root Size/partition table: Sda1 root 36 Gb / Sda2 swap 1 Gb
Output of lspci and lspci -n:
fabry@debian:~$ lspci
0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller (rev 02)
0000:00:03.0 PCI bridge: Intel Corp. 82875P Processor to PCI to CSA Bridge (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02)
0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV 36 [GeForce 5700] (rev a1)
0000:02:01.0 Ethernet controller: Intel Corp. 82547EI Gigabit Ethernet Controller (LOM)
0000:03:0d.0 Network controller: RaLink Wireless PCI Adpator RT2400 / RT2460
fabry@debian:~$ lspci -n
0000:00:00.0 0600: 8086:2578 (rev 02)
0000:00:01.0 0604: 8086:2579 (rev 02)
0000:00:03.0 0604: 8086:257b (rev 02)
0000:00:1d.0 0c03: 8086:24d2 (rev 02)
0000:00:1d.1 0c03: 8086:24d4 (rev 02)
0000:00:1d.2 0c03: 8086:24d7 (rev 02)
0000:00:1d.3 0c03: 8086:24de (rev 02)
0000:00:1d.7 0c03: 8086:24dd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev c2)
0000:00:1f.0 0601: 8086:24d0 (rev 02)
0000:00:1f.1 0101: 8086:24db (rev 02)
0000:00:1f.2 0101: 8086:24d1 (rev 02)
0000:00:1f.3 0c05: 8086:24d3 (rev 02)
0000:00:1f.5 0401: 8086:24d5 (rev 02)
0000:01:00.0 0300: 10de:0342 (rev a1)
0000:02:01.0 0200: 8086:1019
0000:03:0d.0 0280: 1814:0101
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [E] DCHP not work with ADSL over ethernet interface eth0, needs manual configuration of pppoeconf
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O] without using tasksel
Install boot loader: [O]
Reboot: [O]
Comments/Problems: see upware
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
info: /bin/report-hw: discover: i810-tco;;;Intel Corporation;82801EB/ER (ICH5/ICH5R) LPC Bridge;
info: /bin/report-hw: discover: ;;;Unknown;SONY DVD RW DRU-720A;/dev/hdc
info: /bin/report-hw: discover: ;;;Unknown;Pioneer DVD-ROM ATAPIModel DVD-116 0122;/dev/hda
info: /bin/report-hw: discover: e1000;;;Intel Corporation;82547EI Gigabit Ethernet Controller (LOM);
info: /bin/report-hw: discover: piix;;;Intel Corporation;82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller;
info: /bin/report-hw: discover: ata_piix;;;Intel Corporation;82801EB (ICH5) Serial ATA 150 Storage Controller;
info: /bin/report-hw: discover: ide-scsi;;;Linux;IDE-SCSI emulation layer;
info: /bin/report-hw: discover: usb-uhci;;;Intel Corporation;82801EB/ER (ICH5/ICH5R) USB UHCI #1;
info: /bin/report-hw: discover: usb-uhci;;;Intel Corporation;82801EB/ER (ICH5/ICH5R) USB UHCI #2;
info: /bin/report-hw: discover: usb-uhci;;;Intel Corporation;82801EB/ER (ICH5/ICH5R) USB UHCI #3;
info: /bin/report-hw: discover: usb-uhci;;;Intel Corporation;82801EB/ER (ICH5/ICH5R) USB UHCI #4;
info: /bin/report-hw: discover: ehci-hcd;;;Intel Corporation;82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller;
info: /bin/report-hw: discover: ;;;ATA;WDC WD360GD-00FN;/dev/sda
error: /bin/report-hw: Unable to find lspci.
info: /bin/report-hw: /proc/bus/pci/devices: 0000 80862578 0 f8000008 00000000 00000000 00000000 00000000 00000000 00000000 04000000 00000000 00000000 00000000 00000000 00000000 00000000
info: /bin/report-hw: /proc/bus/pci/devices: 0008 80862579 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
info: /bin/report-hw: /proc/bus/pci/devices: 0018 8086257b 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
info: /bin/report-hw: /proc/bus/pci/devices: 00e8 808624d2 a9 00000000 00000000 00000000 00000000 0000ef01 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000 uhci_hcd
info: /bin/report-hw: /proc/bus/pci/devices: 00e9 808624d4 b1 00000000 00000000 00000000 00000000 0000ef21 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000 uhci_hcd
info: /bin/report-hw: /proc/bus/pci/devices: 00ea 808624d7 b9 00000000 00000000 00000000 00000000 0000ef41 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000 uhci_hcd
info: /bin/report-hw: /proc/bus/pci/devices: 00eb 808624de a9 00000000 00000000 00000000 00000000 0000ef81 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000 uhci_hcd
info: /bin/report-hw: /proc/bus/pci/devices: 00ef 808624dd c1 febffc00 00000000 00000000 00000000 00000000 00000000 00000000 00000400 00000000 00000000 00000000 00000000 00000000 00000000 ehci_hcd
info: /bin/report-hw: /proc/bus/pci/devices: 00f0 8086244e 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
info: /bin/report-hw: /proc/bus/pci/devices: 00f8 808624d0 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
info: /bin/report-hw: /proc/bus/pci/devices: 00f9 808624db b9 00000000 00000000 00000000 00000000 0000fc01 20000000 00000000 00000000 00000000 00000000 00000000 00000010 00000400 00000000 PIIX IDE
info: /bin/report-hw: /proc/bus/pci/devices: 00fa 808624d1 b9 0000efe1 0000efad 0000efa1 0000efa9 0000ef61 00000000 00000000 00000008 00000004 00000008 00000004 00000010 00000000 00000000 ata_piix
info: /bin/report-hw: /proc/bus/pci/devices: 00fb 808624d3 c9 00000000 00000000 00000000 00000000 00000401 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000
info: /bin/report-hw: /proc/bus/pci/devices: 00fd 808624d5 c9 0000e801 0000ee81 febff800 febff400 00000000 00000000 00000000 00000100 00000040 00000200 00000100 00000000 00000000 00000000
info: /bin/report-hw: /proc/bus/pci/devices: 0100 10de0342 a9 fd000000 e0000008 00000000 00000000 00000000 00000000 fe8e0000 01000000 10000000 00000000 00000000 00000000 00000000 00020000
info: /bin/report-hw: /proc/bus/pci/devices: 0208 80861019 b9 fe9e0000 00000000 0000df81 00000000 00000000 00000000 00000000 00020000 00000000 00000020 00000000 00000000 00000000 00000000 e1000
info: /bin/report-hw: /proc/bus/pci/devices: 0368 18140101 d1 feafc000 00000000 00000000 00000000 00000000 00000000 00000000 00002000 00000000 00000000 00000000 00000000 00000000 00000000
info: /bin/report-hw: lsmod: Module Size Used byntfs 88788 0
info: /bin/report-hw: lsmod: xfs 500056 0
info: /bin/report-hw: lsmod: reiserfs 209872 1
info: /bin/report-hw: lsmod: jfs 157512 0
info: /bin/report-hw: lsmod: ext3 109672 0
info: /bin/report-hw: lsmod: jbd 54552 1 ext3
info: /bin/report-hw: lsmod: vfat 13184 0
info: /bin/report-hw: lsmod: fat 41792 1 vfat
info: /bin/report-hw: lsmod: af_packet 20872 1
info: /bin/report-hw: lsmod: e1000 75396 0
info: /bin/report-hw: lsmod: nls_cp437 6016 1
info: /bin/report-hw: lsmod: ds 17796 0
info: /bin/report-hw: lsmod: yenta_socket 19200 0
info: /bin/report-hw: lsmod: pcmcia_core 63028 2 ds,yenta_socket
info: /bin/report-hw: lsmod: sd_mod 20480 3
info: /bin/report-hw: lsmod: isofs 33976 0
info: /bin/report-hw: lsmod: ide_cd 38176 0
info: /bin/report-hw: lsmod: cdrom 35740 1 ide_cd
info: /bin/report-hw: lsmod: ide_disk 16768 0
info: /bin/report-hw: lsmod: ide_generic 1664 0
info: /bin/report-hw: lsmod: pdc202xx_new 10012 0
info: /bin/report-hw: lsmod: aec62xx 10012 0
info: /bin/report-hw: lsmod: alim15x3 11404 0
info: /bin/report-hw: lsmod: amd74xx 13340 0
info: /bin/report-hw: lsmod: atiixp 8472 0
info: /bin/report-hw: lsmod: cmd64x 11548 0
info: /bin/report-hw: lsmod: cs5520 6408 0
info: /bin/report-hw: lsmod: cs5530 6664 0
info: /bin/report-hw: lsmod: cy82c693 4996 0
info: /bin/report-hw: lsmod: generic 4608 0
info: /bin/report-hw: lsmod: hpt34x 5760 0
info: /bin/report-hw: lsmod: ns87415 4936 0
info: /bin/report-hw: lsmod: opti621 4740 0
info: /bin/report-hw: lsmod: pdc202xx_old 15388 0
info: /bin/report-hw: lsmod: rz1000 3200 0
info: /bin/report-hw: lsmod: sc1200 8456 0
info: /bin/report-hw: lsmod: serverworks 12308 0
info: /bin/report-hw: lsmod: siimage 12032 0
info: /bin/report-hw: lsmod: sis5513 15240 0
info: /bin/report-hw: lsmod: slc90e66 8200 0
info: /bin/report-hw: lsmod: triflex 5380 0
info: /bin/report-hw: lsmod: trm290 4740 0
info: /bin/report-hw: lsmod: via82cxxx 12956 0
info: /bin/report-hw: lsmod: floppy 54992 0
info: /bin/report-hw: lsmod: usb_storage 59328 0
info: /bin/report-hw: lsmod: ata_piix 7812 2
info: /bin/report-hw: lsmod: libata 36228 1 ata_piix
info: /bin/report-hw: lsmod: scsi_mod 115148 3 sd_mod,usb_storage,libata
info: /bin/report-hw: lsmod: piix 12448 1
info: /bin/report-hw: lsmod: ide_core 125028 28 ide_cd,ide_disk,ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cy82c693,generic,hpt34x,ns87415,opti621,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,piix
info: /bin/report-hw: lsmod: fbcon 27524 68
info: /bin/report-hw: lsmod: vga16fb 12456 2
info: /bin/report-hw: lsmod: vgastate 8576 1 vga16fb
info: /bin/report-hw: lsmod: font 8576 1 fbcon
info: /bin/report-hw: lsmod: vesafb 6688 0
info: /bin/report-hw: lsmod: cfbcopyarea 3840 2 vga16fb,vesafb
info: /bin/report-hw: lsmod: cfbimgblt 3200 2 vga16fb,vesafb
info: /bin/report-hw: lsmod: cfbfillrect 3712 2 vga16fb,vesafb
info: /bin/report-hw: lsmod: usbserial 27112 0
info: /bin/report-hw: lsmod: usbhid 28864 0
info: /bin/report-hw: lsmod: usbkbd 6912 0
info: /bin/report-hw: lsmod: ehci_hcd 27908 0
info: /bin/report-hw: lsmod: uhci_hcd 29328 0
info: /bin/report-hw: lsmod: usbcore 104164 8 usb_storage,usbserial,usbhid,usbkbd,ehci_hcd,uhci_hcd
info: /bin/report-hw: lsmod: thermal 12944 0
info: /bin/report-hw: lsmod: processor 17584 1 thermal
info: /bin/report-hw: lsmod: fan 4236 0
info: /bin/report-hw: lsmod: unix 26036 6
info: /bin/report-hw: cpuinfo: processor : 0
info: /bin/report-hw: cpuinfo: vendor_id : GenuineIntel
info: /bin/report-hw: cpuinfo: cpu family : 15
info: /bin/report-hw: cpuinfo: model : 3
info: /bin/report-hw: cpuinfo: model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
info: /bin/report-hw: cpuinfo: stepping : 3
info: /bin/report-hw: cpuinfo: cpu MHz : 3601.534
info: /bin/report-hw: cpuinfo: cache size : 1024 KB
info: /bin/report-hw: cpuinfo: fdiv_bug : no
info: /bin/report-hw: cpuinfo: hlt_bug : no
info: /bin/report-hw: cpuinfo: f00f_bug : no
info: /bin/report-hw: cpuinfo: coma_bug : no
info: /bin/report-hw: cpuinfo: fpu : yes
info: /bin/report-hw: cpuinfo: fpu_exception : yes
info: /bin/report-hw: cpuinfo: cpuid level : 5
info: /bin/report-hw: cpuinfo: wp : yes
info: /bin/report-hw: cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe pni monitor ds_cpl cid
info: /bin/report-hw: cpuinfo: bogomips : 7143.42
info: /bin/report-hw: cpuinfo:
info: /bin/report-hw: ioports: 0000-001f : dma1
info: /bin/report-hw: ioports: 0020-0021 : pic1
info: /bin/report-hw: ioports: 0040-005f : timer
info: /bin/report-hw: ioports: 0060-006f : keyboard
info: /bin/report-hw: ioports: 0080-008f : dma page reg
info: /bin/report-hw: ioports: 00a0-00a1 : pic2
info: /bin/report-hw: ioports: 00c0-00df : dma2
info: /bin/report-hw: ioports: 00f0-00ff : fpu
info: /bin/report-hw: ioports: 0170-0177 : ide1
info: /bin/report-hw: ioports: 01f0-01f7 : ide0
info: /bin/report-hw: ioports: 02f8-02ff : serial
info: /bin/report-hw: ioports: 0376-0376 : ide1
info: /bin/report-hw: ioports: 03c0-03df : vga+
info: /bin/report-hw: ioports: 03f6-03f6 : ide0
info: /bin/report-hw: ioports: 03f8-03ff : serial
info: /bin/report-hw: ioports: 0400-041f : 0000:00:1f.3
info: /bin/report-hw: ioports: 0480-04bf : 0000:00:1f.0
info: /bin/report-hw: ioports: 0800-087f : 0000:00:1f.0
info: /bin/report-hw: ioports: 0cf8-0cff : PCI conf1
info: /bin/report-hw: ioports: d000-dfff : PCI Bus #02
info: /bin/report-hw: ioports: df80-df9f : 0000:02:01.0
info: /bin/report-hw: ioports: df80-df9f : e1000
info: /bin/report-hw: ioports: e800-e8ff : 0000:00:1f.5
info: /bin/report-hw: ioports: ee80-eebf : 0000:00:1f.5
info: /bin/report-hw: ioports: ef00-ef1f : 0000:00:1d.0
info: /bin/report-hw: ioports: ef00-ef1f : uhci_hcd
info: /bin/report-hw: ioports: ef20-ef3f : 0000:00:1d.1
info: /bin/report-hw: ioports: ef20-ef3f : uhci_hcd
info: /bin/report-hw: ioports: ef40-ef5f : 0000:00:1d.2
info: /bin/report-hw: ioports: ef40-ef5f : uhci_hcd
info: /bin/report-hw: ioports: ef60-ef6f : 0000:00:1f.2
info: /bin/report-hw: ioports: ef60-ef6f : libata
info: /bin/report-hw: ioports: ef80-ef9f : 0000:00:1d.3
info: /bin/report-hw: ioports: ef80-ef9f : uhci_hcd
info: /bin/report-hw: ioports: efa0-efa7 : 0000:00:1f.2
info: /bin/report-hw: ioports: efa0-efa7 : libata
info: /bin/report-hw: ioports: efa8-efab : 0000:00:1f.2
info: /bin/report-hw: ioports: efa8-efab : libata
info: /bin/report-hw: ioports: efac-efaf : 0000:00:1f.2
info: /bin/report-hw: ioports: efac-efaf : libata
info: /bin/report-hw: ioports: efe0-efe7 : 0000:00:1f.2
info: /bin/report-hw: ioports: efe0-efe7 : libata
info: /bin/report-hw: ioports: fc00-fc0f : 0000:00:1f.1
info: /bin/report-hw: ioports: fc00-fc07 : ide0
info: /bin/report-hw: ioports: fc08-fc0f : ide1
info: /bin/report-hw: iomem: 00000000-0009fbff : System RAM
info: /bin/report-hw: iomem: 0009fc00-0009ffff : reserved
info: /bin/report-hw: iomem: 000a0000-000bffff : Video RAM area
info: /bin/report-hw: iomem: 000c0000-000cfbff : Video ROM
info: /bin/report-hw: iomem: 000f0000-000fffff : System ROM
info: /bin/report-hw: iomem: 00100000-1ff2ffff : System RAM
info: /bin/report-hw: iomem: 00100000-0024dfc2 : Kernel code
info: /bin/report-hw: iomem: 0024dfc3-0030557f : Kernel data
info: /bin/report-hw: iomem: 1ff30000-1ff3ffff : ACPI Tables
info: /bin/report-hw: iomem: 1ff40000-1ffeffff : ACPI Non-volatile Storage
info: /bin/report-hw: iomem: 1fff0000-1fffffff : reserved
info: /bin/report-hw: iomem: 20000000-200003ff : 0000:00:1f.1
info: /bin/report-hw: iomem: d7f00000-f7efffff : PCI Bus #01
info: /bin/report-hw: iomem: e0000000-efffffff : 0000:01:00.0
info: /bin/report-hw: iomem: f8000000-fbffffff : 0000:00:00.0
info: /bin/report-hw: iomem: fc800000-fe8fffff : PCI Bus #01
info: /bin/report-hw: iomem: fd000000-fdffffff : 0000:01:00.0
info: /bin/report-hw: iomem: fe900000-fe9fffff : PCI Bus #02
info: /bin/report-hw: iomem: fe9e0000-fe9fffff : 0000:02:01.0
info: /bin/report-hw: iomem: fe9e0000-fe9fffff : e1000
info: /bin/report-hw: iomem: feafc000-feafdfff : 0000:03:0d.0
info: /bin/report-hw: iomem: febff400-febff4ff : 0000:00:1f.5
info: /bin/report-hw: iomem: febff800-febff9ff : 0000:00:1f.5
info: /bin/report-hw: iomem: febffc00-febfffff : 0000:00:1d.7
info: /bin/report-hw: iomem: febffc00-febfffff : ehci_hcd
info: /bin/report-hw: iomem: ffb80000-ffffffff : reserved
info: /bin/report-hw: interrupts: CPU0
info: /bin/report-hw: interrupts: 0: 171734 IO-APIC-edge timer
info: /bin/report-hw: interrupts: 1: 147 IO-APIC-edge i8042
info: /bin/report-hw: interrupts: 9: 0 IO-APIC-level acpi
info: /bin/report-hw: interrupts: 14: 1015 IO-APIC-edge ide0
info: /bin/report-hw: interrupts: 15: 29 IO-APIC-edge ide1
info: /bin/report-hw: interrupts: 169: 0 IO-APIC-level uhci_hcd, uhci_hcd
info: /bin/report-hw: interrupts: 177: 43 IO-APIC-level uhci_hcd
info: /bin/report-hw: interrupts: 185: 13168 IO-APIC-level uhci_hcd, libata, eth0
info: /bin/report-hw: interrupts: 193: 2 IO-APIC-level ehci_hcd
info: /bin/report-hw: interrupts: NMI: 0
info: /bin/report-hw: interrupts: LOC: 171681
info: /bin/report-hw: interrupts: ERR: 0
info: /bin/report-hw: interrupts: MIS: 0
info: /bin/report-hw: meminfo: MemTotal: 515844 kB
info: /bin/report-hw: meminfo: MemFree: 217136 kB
info: /bin/report-hw: meminfo: Buffers: 36528 kB
info: /bin/report-hw: meminfo: Cached: 220852 kB
info: /bin/report-hw: meminfo: SwapCached: 0 kB
info: /bin/report-hw: meminfo: Active: 149640 kB
info: /bin/report-hw: meminfo: Inactive: 114844 kB
info: /bin/report-hw: meminfo: HighTotal: 0 kB
info: /bin/report-hw: meminfo: HighFree: 0 kB
info: /bin/report-hw: meminfo: LowTotal: 515844 kB
info: /bin/report-hw: meminfo: LowFree: 217136 kB
info: /bin/report-hw: meminfo: SwapTotal: 1494004 kB
info: /bin/report-hw: meminfo: SwapFree: 1494004 kB
info: /bin/report-hw: meminfo: Dirty: 16 kB
info: /bin/report-hw: meminfo: Writeback: 0 kB
info: /bin/report-hw: meminfo: Mapped: 8700 kB
info: /bin/report-hw: meminfo: Slab: 27756 kB
info: /bin/report-hw: meminfo: Committed_AS: 38396 kB
info: /bin/report-hw: meminfo: PageTables: 172 kB
info: /bin/report-hw: meminfo: VmallocTotal: 516016 kB
info: /bin/report-hw: meminfo: VmallocUsed: 5048 kB
info: /bin/report-hw: meminfo: VmallocChunk: 509888 kB
error: /bin/report-hw: Unable to find hdparm.
info: /bin/report-hw: df: Filesystem 1k-blocks Used Available Use% Mounted on
info: /bin/report-hw: df: tmpfs 102400 25664 76736 25% /
info: /bin/report-hw: df: /dev/scsi/host0/bus0/target0/lun0/part1 34651096 229836 34421260 1% /target
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/ide-core.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/piix.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/scsi/scsi_mod.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/scsi/libata.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/scsi/ata_piix.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/usb/storage/usb-storage.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/block/floppy.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/via82cxxx.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/trm290.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/triflex.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/slc90e66.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/sis5513.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/siimage.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/serverworks.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/sc1200.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/rz1000.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/pdc202xx_old.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/opti621.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/ns87415.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/hpt34x.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/generic.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/cy82c693.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/cs5530.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/cs5520.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/cmd64x.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/atiixp.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/amd74xx.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/alim15x3.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/aec62xx.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/pci/pdc202xx_new.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/ide-generic.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/ide-disk.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/cdrom/cdrom.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/ide/ide-cd.ko
insmod /lib/modules/2.6.8-2-386/kernel/fs/isofs/isofs.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/scsi/sd_mod.ko
insmod /lib/modules/2.6.8-2-386/kernel/drivers/net/e1000/e1000.ko
File descriptor 3 left open
File descriptor 4 left open
File descriptor 5 left open
File descriptor 6 left open
No matching physical volumes found
File descriptor 3 left open
File descriptor 4 left open
File descriptor 5 left open
File descriptor 6 left open
No volume groups found
Reading all physical volumes. This may take a while...
mkfs.reiserfs 3.6.19 (2003 www.namesys.com)
Selecting previously deselected package base-files.
(Reading database ... 0 files and directories currently installed.)
Unpacking base-files (from .../base-files_3.1.2_i386.deb) ...
Selecting previously deselected package base-passwd.
Unpacking base-passwd (from .../base-passwd_3.5.9_i386.deb) ...
dpkg: base-passwd: dependency problems, but configuring anyway as you request:
base-passwd depends on libc6 (>= 2.3.2.ds1-4); however:
Package libc6 is not installed.
Setting up base-passwd (3.5.9) ...
dpkg: base-files: dependency problems, but configuring anyway as you request:
base-files depends on awk; however:
Package awk is not installed.
Setting up base-files (3.1.2) ...
dpkg: regarding .../archives/dpkg_1.10.27_i386.deb containing dpkg, pre-dependency problem:
dpkg pre-depends on dselect
dselect is not installed.
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../archives/dpkg_1.10.27_i386.deb containing dpkg, pre-dependency problem:
dpkg pre-depends on libc6 (>= 2.3.2.ds1-4)
dpkg: warning - ignoring pre-dependency problem !
(Reading database ... 84 files and directories currently installed.)
Preparing to replace dpkg 1.10.27 (using .../archives/dpkg_1.10.27_i386.deb) ...
Unpacking replacement dpkg ...
dpkg: dpkg: dependency problems, but configuring anyway as you request:
dpkg depends on dselect; however:
Package dselect is not installed.
dpkg depends on libc6 (>= 2.3.2.ds1-4); however:
Package libc6 is not installed.
Setting up dpkg (1.10.27) ...
Moving /usr/info/dir to /usr/share/info/dir.
Making /usr/info a symlink to /usr/share/info.
Selecting previously deselected package libc6.
(Reading database ... 281 files and directories currently installed.)
Unpacking libc6 (from .../libc6_2.3.2.ds1-20_i386.deb) ...
dpkg: libc6: dependency problems, but configuring anyway as you request:
libc6 depends on libdb1-compat; however:
Package libdb1-compat is not installed.
Setting up libc6 (2.3.2.ds1-20) ...
Current default timezone: 'UTC'.
Local time is now: Wed May 25 08:10:27 UTC 2005.
Universal Time is now: Wed May 25 08:10:27 UTC 2005.
Run 'tzconfig' if you wish to change it.
Selecting previously deselected package perl-base.
(Reading database ... 2332 files and directories currently installed.)
Unpacking perl-base (from .../perl-base_5.8.4-8_i386.deb) ...
Setting up perl-base (5.8.4-8) ...
Selecting previously deselected package mawk.
(Reading database ... 2453 files and directories currently installed.)
Unpacking mawk (from .../mawk_1.3.3-11_i386.deb) ...
Setting up mawk (1.3.3-11) ...
Selecting previously deselected package debconf.
(Reading database ... 2472 files and directories currently installed.)
Unpacking debconf (from .../debconf_1.4.30.11_all.deb) ...
dpkg: debconf: dependency problems, but configuring anyway as you request:
debconf depends on debconf-i18n | debconf-english; however:
Package debconf-i18n is not installed.
Package debconf-english is not installed.
Setting up debconf (1.4.30.11) ...
(Reading database ... 2620 files and directories currently installed.)
Preparing to replace base-files 3.1.2 (using .../base-files_3.1.2_i386.deb) ...
Unpacking replacement base-files ...
Preparing to replace base-passwd 3.5.9 (using .../base-passwd_3.5.9_i386.deb) ...
Unpacking replacement base-passwd ...
Selecting previously deselected package bash.
dpkg: regarding .../bash_2.05b-24_i386.deb containing bash, pre-dependency problem:
bash pre-depends on libncurses5 (>= 5.4-1)
dpkg: warning - ignoring pre-dependency problem !
Unpacking bash (from .../bash_2.05b-24_i386.deb) ...
Selecting previously deselected package bsdutils.
Unpacking bsdutils (from .../bsdutils_1%3a2.12-10_i386.deb) ...
Selecting previously deselected package coreutils.
dpkg: regarding .../coreutils_5.2.1-2_i386.deb containing coreutils, pre-dependency problem:
coreutils pre-depends on libacl1 (>= 2.2.11-1)
dpkg: warning - ignoring pre-dependency problem !
Unpacking coreutils (from .../coreutils_5.2.1-2_i386.deb) ...
Selecting previously deselected package libacl1.
Unpacking libacl1 (from .../libacl1_2.2.23-1_i386.deb) ...
Selecting previously deselected package libattr1.
Unpacking libattr1 (from .../libattr1_2.4.16-1_i386.deb) ...
Preparing to replace debconf 1.4.30.11 (using .../debconf_1.4.30.11_all.deb) ...
Unpacking replacement debconf ...
Selecting previously deselected package debconf-i18n.
Unpacking debconf-i18n (from .../debconf-i18n_1.4.30.11_all.deb) ...
Selecting previously deselected package liblocale-gettext-perl.
Unpacking liblocale-gettext-perl (from .../liblocale-gettext-perl_1.01-17_i386.deb) ...
Selecting previously deselected package libtext-wrapi18n-perl.
Unpacking libtext-wrapi18n-perl (from .../libtext-wrapi18n-perl_0.06-1_all.deb) ...
Selecting previously deselected package libtext-charwidth-perl.
Unpacking libtext-charwidth-perl (from .../libtext-charwidth-perl_0.04-1_i386.deb) ...
Selecting previously deselected package debianutils.
dpkg: regarding .../debianutils_2.8.4_i386.deb containing debianutils, pre-dependency problem:
debianutils pre-depends on coreutils (>= 4.5.8-1)
coreutils is unpacked, but has never been configured.
dpkg: warning - ignoring pre-dependency problem !
Unpacking debianutils (from .../debianutils_2.8.4_i386.deb) ...
Selecting previously deselected package diff.
Unpacking diff (from .../diff_2.8.1-11_i386.deb) ...
dpkg: regarding .../archives/dpkg_1.10.27_i386.deb containing dpkg, pre-dependency problem:
dpkg pre-depends on dselect
dselect is not installed.
dpkg: warning - ignoring pre-dependency problem !
Preparing to replace dpkg 1.10.27 (using .../archives/dpkg_1.10.27_i386.deb) ...
Unpacking replacement dpkg ...
Selecting previously deselected package dselect.
Unpacking dselect (from .../dselect_1.10.27_i386.deb) ...
Selecting previously deselected package libblkid1.
Unpacking libblkid1 (from .../libblkid1_1.35-6_i386.deb) ...
Selecting previously deselected package e2fsprogs.
dpkg: regarding .../e2fsprogs_1.35-6_i386.deb containing e2fsprogs, pre-dependency problem:
e2fsprogs pre-depends on e2fslibs (= 1.35-6)
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../e2fsprogs_1.35-6_i386.deb containing e2fsprogs, pre-dependency problem:
e2fsprogs pre-depends on libblkid1 (>= 1.34-1)
libblkid1 is unpacked, but has never been configured.
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../e2fsprogs_1.35-6_i386.deb containing e2fsprogs, pre-dependency problem:
e2fsprogs pre-depends on libcomerr2 (>= 1.34-1)
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../e2fsprogs_1.35-6_i386.deb containing e2fsprogs, pre-dependency problem:
e2fsprogs pre-depends on libss2 (>= 1.34-1)
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../e2fsprogs_1.35-6_i386.deb containing e2fsprogs, pre-dependency problem:
e2fsprogs pre-depends on libuuid1 (>= 1.34-1)
dpkg: warning - ignoring pre-dependency problem !
Unpacking e2fsprogs (from .../e2fsprogs_1.35-6_i386.deb) ...
Selecting previously deselected package e2fslibs.
Unpacking e2fslibs (from .../e2fslibs_1.35-6_i386.deb) ...
Selecting previously deselected package libcomerr2.
Unpacking libcomerr2 (from .../libcomerr2_1.35-6_i386.deb) ...
Selecting previously deselected package libss2.
Unpacking libss2 (from .../libss2_1.35-6_i386.deb) ...
Selecting previously deselected package libuuid1.
Unpacking libuuid1 (from .../libuuid1_1.35-6_i386.deb) ...
Selecting previously deselected package findutils.
Unpacking findutils (from .../findutils_4.1.20-5_i386.deb) ...
Selecting previously deselected package grep.
Unpacking grep (from .../grep_2.5.1.ds1-4_i386.deb) ...
Selecting previously deselected package gzip.
Unpacking gzip (from .../archives/gzip_1.3.5-9_i386.deb) ...
Selecting previously deselected package hostname.
Unpacking hostname (from .../hostname_2.13_i386.deb) ...
Selecting previously deselected package libcap1.
Unpacking libcap1 (from .../libcap1_1%3a1.10-14_i386.deb) ...
Preparing to replace libc6 2.3.2.ds1-20 (using .../libc6_2.3.2.ds1-20_i386.deb) ...
Unpacking replacement libc6 ...
Selecting previously deselected package libdb1-compat.
Unpacking libdb1-compat (from .../libdb1-compat_2.1.3-7_i386.deb) ...
Selecting previously deselected package libdb3.
Unpacking libdb3 (from .../libdb3_3.2.9-22_i386.deb) ...
Selecting previously deselected package libncurses5.
Unpacking libncurses5 (from .../libncurses5_5.4-4_i386.deb) ...
Selecting previously deselected package libnewt0.51.
Unpacking libnewt0.51 (from .../libnewt0.51_0.51.6-20_i386.deb) ...
Selecting previously deselected package libpam-modules.
Unpacking libpam-modules (from .../libpam-modules_0.76-22_i386.deb) ...
Selecting previously deselected package libpam-runtime.
Unpacking libpam-runtime (from .../libpam-runtime_0.76-22_all.deb) ...
Selecting previously deselected package libpam0g.
Unpacking libpam0g (from .../libpam0g_0.76-22_i386.deb) ...
Selecting previously deselected package libpopt0.
Unpacking libpopt0 (from .../libpopt0_1.7-5_i386.deb) ...
Selecting previously deselected package login.
dpkg: regarding .../login_1%3a4.0.3-31sarge1_i386.deb containing login, pre-dependency problem:
login pre-depends on libpam0g (>= 0.76)
libpam0g is unpacked, but has never been configured.
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../login_1%3a4.0.3-31sarge1_i386.deb containing login, pre-dependency problem:
login pre-depends on libpam-runtime (>= 0.76-14)
libpam-runtime is unpacked, but has never been configured.
dpkg: warning - ignoring pre-dependency problem !
Unpacking login (from .../login_1%3a4.0.3-31sarge1_i386.deb) ...
Selecting previously deselected package makedev.
Unpacking makedev (from .../makedev_2.3.1-77_all.deb) ...
Preparing to replace mawk 1.3.3-11 (using .../mawk_1.3.3-11_i386.deb) ...
Unpacking replacement mawk ...
Selecting previously deselected package modutils.
Unpacking modutils (from .../modutils_2.4.26-1.2_i386.deb) ...
Selecting previously deselected package mount.
Unpacking mount (from .../mount_2.12-10_i386.deb) ...
Selecting previously deselected package ncurses-base.
Unpacking ncurses-base (from .../ncurses-base_5.4-4_all.deb) ...
Selecting previously deselected package ncurses-bin.
dpkg: regarding .../ncurses-bin_5.4-4_i386.deb containing ncurses-bin, pre-dependency problem:
ncurses-bin pre-depends on libncurses5 (>= 5.4-1)
libncurses5 is unpacked, but has never been configured.
dpkg: warning - ignoring pre-dependency problem !
Unpacking ncurses-bin (from .../ncurses-bin_5.4-4_i386.deb) ...
Selecting previously deselected package passwd.
Unpacking passwd (from .../passwd_1%3a4.0.3-31sarge1_i386.deb) ...
Preparing to replace perl-base 5.8.4-8 (using .../perl-base_5.8.4-8_i386.deb) ...
Unpacking replacement perl-base ...
Selecting previously deselected package procps.
Unpacking procps (from .../procps_1%3a3.2.1-2_i386.deb) ...
Selecting previously deselected package sed.
Unpacking sed (from .../archives/sed_4.1.2-8_i386.deb) ...
Selecting previously deselected package slang1a-utf8.
Unpacking slang1a-utf8 (from .../slang1a-utf8_1.4.9dbs-8_i386.deb) ...
Selecting previously deselected package initscripts.
Unpacking initscripts (from .../initscripts_2.86.ds1-1_i386.deb) ...
Selecting previously deselected package sysvinit.
dpkg: regarding .../sysvinit_2.86.ds1-1_i386.deb containing sysvinit, pre-dependency problem:
sysvinit pre-depends on initscripts
initscripts is unpacked, but has never been configured.
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../sysvinit_2.86.ds1-1_i386.deb containing sysvinit, pre-dependency problem:
sysvinit pre-depends on sysv-rc (>= 2.85-2) | file-rc (>> 0.7.0)
dpkg: warning - ignoring pre-dependency problem !
Unpacking sysvinit (from .../sysvinit_2.86.ds1-1_i386.deb) ...
Selecting previously deselected package sysv-rc.
Unpacking sysv-rc (from .../sysv-rc_2.86.ds1-1_all.deb) ...
Selecting previously deselected package tar.
Unpacking tar (from .../tar_1.13.93-4_i386.deb) ...
Selecting previously deselected package util-linux.
dpkg: regarding .../util-linux_2.12-10_i386.deb containing util-linux, pre-dependency problem:
util-linux pre-depends on libncurses5 (>= 5.4-1)
libncurses5 is unpacked, but has never been configured.
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../util-linux_2.12-10_i386.deb containing util-linux, pre-dependency problem:
util-linux pre-depends on slang1a-utf8 (>> 1.4.9dbs-4)
slang1a-utf8 is unpacked, but has never been configured.
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../util-linux_2.12-10_i386.deb containing util-linux, pre-dependency problem:
util-linux pre-depends on zlib1g (>= 1:1.2.1)
dpkg: warning - ignoring pre-dependency problem !
Unpacking util-linux (from .../util-linux_2.12-10_i386.deb) ...
Selecting previously deselected package whiptail.
Unpacking whiptail (from .../whiptail_0.51.6-20_i386.deb) ...
Selecting previously deselected package libgcc1.
Unpacking libgcc1 (from .../libgcc1_1%3a3.4.3-6_i386.deb) ...
Selecting previously deselected package gcc-3.3-base.
Unpacking gcc-3.3-base (from .../gcc-3.3-base_1%3a3.3.5-8_i386.deb) ...
Selecting previously deselected package libstdc++5.
Unpacking libstdc++5 (from .../libstdc++5_1%3a3.3.5-8_i386.deb) ...
Setting up ncurses-base (5.4-4) ...
Setting up sysv-rc (2.86.ds1-1) ...
Setting up libpam-runtime (0.76-22) ...
Setting up gcc-3.3-base (3.3.5-8) ...
Setting up libc6 (2.3.2.ds1-20) ...
Current default timezone: 'UTC'.
Local time is now: Wed May 25 08:10:36 UTC 2005.
Universal Time is now: Wed May 25 08:10:36 UTC 2005.
Run 'tzconfig' if you wish to change it.
Setting up libcap1 (1.10-14) ...
Setting up libdb1-compat (2.1.3-7) ...
Setting up libuuid1 (1.35-6) ...
Setting up libpopt0 (1.7-5) ...
Setting up libpam0g (0.76-22) ...
Setting up bsdutils (2.12-10) ...
Setting up perl-base (5.8.4-8) ...
Setting up tar (1.13.93-4) ...
Setting up slang1a-utf8 (1.4.9dbs-8) ...
Setting up libgcc1 (3.4.3-6) ...
Setting up mount (2.12-10) ...
Setting up libncurses5 (5.4-4) ...
Setting up libattr1 (2.4.16-1) ...
Setting up sed (4.1.2-8) ...
Setting up e2fslibs (1.35-6) ...
Setting up base-passwd (3.5.9) ...
Setting up libcomerr2 (1.35-6) ...
Setting up mawk (1.3.3-11) ...
Setting up libnewt0.51 (0.51.6-20) ...
Setting up grep (2.5.1.ds1-4) ...
Setting up hostname (2.13) ...
Setting up libacl1 (2.2.23-1) ...
Setting up libblkid1 (1.35-6) ...
Setting up libss2 (1.35-6) ...
Setting up findutils (4.1.20-5) ...
Setting up e2fsprogs (1.35-6) ...
Setting up liblocale-gettext-perl (1.01-17) ...
Setting up diff (2.8.1-11) ...
Setting up libdb3 (3.2.9-22) ...
Setting up libstdc++5 (3.3.5-8) ...
Setting up libtext-charwidth-perl (0.04-1) ...
Setting up libtext-wrapi18n-perl (0.06-1) ...
Setting up coreutils (5.2.1-2) ...
Setting up debianutils (2.8.4) ...
Setting up makedev (2.3.1-77) ...
Setting up procps (3.2.1-2) ...
Setting up ncurses-bin (5.4-4) ...
Setting up whiptail (0.51.6-20) ...
Setting up libpam-modules (0.76-22) ...
Setting up base-files (3.1.2) ...
Setting up gzip (1.3.5-9) ...
Setting up dselect (1.10.27) ...
Setting up login (4.0.3-31sarge1) ...
Setting up passwd (4.0.3-31sarge1) ...
Setting up dpkg (1.10.27) ...
Setting up bash (2.05b-24) ...
dpkg: debconf-i18n: dependency problems, but configuring anyway as you request:
debconf-i18n depends on libtext-iconv-perl; however:
Package libtext-iconv-perl is not installed.
Setting up debconf-i18n (1.4.30.11) ...
dpkg: util-linux: dependency problems, but configuring anyway as you request:
util-linux depends on zlib1g (>= 1:1.2.1); however:
Package zlib1g is not installed.
Setting up util-linux (2.12-10) ...
Setting up debconf (1.4.30.11) ...
Setting up initscripts (2.86.ds1-1) ...
Setting up sysvinit (2.86.ds1-1) ...
sysvinit: creating /dev/initctl
init: timeout opening/writing control channel /dev/initctl
Setting up modutils (2.4.26-1.2) ...
Selecting previously deselected package adduser.
(Reading database ... 4516 files and directories currently installed.)
Unpacking adduser (from .../archives/adduser_3.63_all.deb) ...
Selecting previously deselected package apt.
Unpacking apt (from .../archives/apt_0.5.28.1_i386.deb) ...
Selecting previously deselected package apt-utils.
Unpacking apt-utils (from .../apt-utils_0.5.28.1_i386.deb) ...
Selecting previously deselected package libdb4.2.
Unpacking libdb4.2 (from .../libdb4.2_4.2.52-18_i386.deb) ...
Selecting previously deselected package at.
Unpacking at (from .../archives/at_3.1.8-11_i386.deb) ...
Selecting previously deselected package base-config.
Unpacking base-config (from .../base-config_2.53.7_all.deb) ...
Selecting previously deselected package aptitude.
Unpacking aptitude (from .../aptitude_0.2.15.8-1_i386.deb) ...
Selecting previously deselected package libsigc++-1.2-5c102.
Unpacking libsigc++-1.2-5c102 (from .../libsigc++-1.2-5c102_1.2.5-4_i386.deb) ...
Selecting previously deselected package bsdmainutils.
Unpacking bsdmainutils (from .../bsdmainutils_6.0.17_i386.deb) ...
Selecting previously deselected package console-common.
Unpacking console-common (from .../console-common_0.7.49_all.deb) ...
Selecting previously deselected package console-tools.
Unpacking console-tools (from .../console-tools_1%3a0.2.3dbs-56_i386.deb) ...
Selecting previously deselected package libconsole.
Unpacking libconsole (from .../libconsole_1%3a0.2.3dbs-56_i386.deb) ...
Selecting previously deselected package console-data.
Unpacking console-data (from .../console-data_2002.12.04dbs-49_all.deb) ...
Selecting previously deselected package cpio.
Unpacking cpio (from .../archives/cpio_2.5-1.2_i386.deb) ...
Selecting previously deselected package cron.
Unpacking cron (from .../cron_3.0pl1-86_i386.deb) ...
Selecting previously deselected package dhcp-client.
Unpacking dhcp-client (from .../dhcp-client_2.0pl5-19.1_i386.deb) ...
Selecting previously deselected package ed.
Unpacking ed (from .../archives/ed_0.2-20_i386.deb) ...
Selecting previously deselected package exim4.
Unpacking exim4 (from .../archives/exim4_4.44-2_all.deb) ...
Selecting previously deselected package exim4-base.
Unpacking exim4-base (from .../exim4-base_4.44-2_i386.deb) ...
Selecting previously deselected package exim4-config.
Unpacking exim4-config (from .../exim4-config_4.44-2_all.deb) ...
Selecting previously deselected package exim4-daemon-light.
Unpacking exim4-daemon-light (from .../exim4-daemon-light_4.44-2_i386.deb) ...
Selecting previously deselected package libgcrypt11.
Unpacking libgcrypt11 (from .../libgcrypt11_1.2.0-4_i386.deb) ...
Selecting previously deselected package libgnutls11.
Unpacking libgnutls11 (from .../libgnutls11_1.0.16-9_i386.deb) ...
Selecting previously deselected package libgpg-error0.
Unpacking libgpg-error0 (from .../libgpg-error0_1.0-1_i386.deb) ...
Selecting previously deselected package libopencdk8.
Unpacking libopencdk8 (from .../libopencdk8_0.5.5-10_i386.deb) ...
Selecting previously deselected package libtasn1-2.
Unpacking libtasn1-2 (from .../libtasn1-2_0.2.10-3_i386.deb) ...
Selecting previously deselected package fdutils.
Unpacking fdutils (from .../fdutils_5.4-20040228-1_i386.deb) ...
Selecting previously deselected package gettext-base.
Unpacking gettext-base (from .../gettext-base_0.14.1-10_i386.deb) ...
Selecting previously deselected package groff-base.
Unpacking groff-base (from .../groff-base_1.18.1.1-6_i386.deb) ...
Selecting previously deselected package ifupdown.
Unpacking ifupdown (from .../ifupdown_0.6.4-4.12_i386.deb) ...
Selecting previously deselected package info.
Unpacking info (from .../archives/info_4.7-2.2_i386.deb) ...
Selecting previously deselected package klogd.
Unpacking klogd (from .../klogd_1.4.1-16_i386.deb) ...
Selecting previously deselected package libssl0.9.7.
Unpacking libssl0.9.7 (from .../libssl0.9.7_0.9.7e-2_i386.deb) ...
Selecting previously deselected package liblzo1.
Unpacking liblzo1 (from .../liblzo1_1.08-1.2_i386.deb) ...
Selecting previously deselected package zlib1g.
Unpacking zlib1g (from .../zlib1g_1%3a1.2.2-3_i386.deb) ...
Selecting previously deselected package liblockfile1.
Unpacking liblockfile1 (from .../liblockfile1_1.06_i386.deb) ...
Selecting previously deselected package libpcre3.
Unpacking libpcre3 (from .../libpcre3_4.5-1.1_i386.deb) ...
Selecting previously deselected package libwrap0.
Unpacking libwrap0 (from .../libwrap0_7.6.dbs-6_i386.deb) ...
Selecting previously deselected package logrotate.
Unpacking logrotate (from .../logrotate_3.7-2_i386.deb) ...
Selecting previously deselected package mailx.
Unpacking mailx (from .../mailx_1%3a8.1.2-0.20040524cvs-4_i386.deb) ...
Selecting previously deselected package man-db.
Unpacking man-db (from .../man-db_2.4.2-21_i386.deb) ...
Selecting previously deselected package libgdbm3.
Unpacking libgdbm3 (from .../libgdbm3_1.8.3-2_i386.deb) ...
Selecting previously deselected package manpages.
Unpacking manpages (from .../manpages_1.70-1_all.deb) ...
Selecting previously deselected package nano.
Unpacking nano (from .../archives/nano_1.2.4-3_i386.deb) ...
Selecting previously deselected package net-tools.
Unpacking net-tools (from .../net-tools_1.60-10_i386.deb) ...
Selecting previously deselected package netbase.
Unpacking netbase (from .../archives/netbase_4.20_all.deb) ...
Selecting previously deselected package netkit-inetd.
Unpacking netkit-inetd (from .../netkit-inetd_0.10-10_i386.deb) ...
Selecting previously deselected package iputils-ping.
Unpacking iputils-ping (from .../iputils-ping_3%3a20020927-2_i386.deb) ...
Selecting previously deselected package nvi.
Unpacking nvi (from .../archives/nvi_1.79-22_i386.deb) ...
Selecting previously deselected package ppp.
Unpacking ppp (from .../ppp_2.4.2+20040428-6_i386.deb) ...
Selecting previously deselected package pppconfig.
Unpacking pppconfig (from .../pppconfig_2.3.10_all.deb) ...
Selecting previously deselected package pppoe.
Unpacking pppoe (from .../archives/pppoe_3.5-4_i386.deb) ...
Selecting previously deselected package pppoeconf.
Unpacking pppoeconf (from .../archives/pppoeconf_1.1_all.deb) ...
Selecting previously deselected package libpcap0.7.
Unpacking libpcap0.7 (from .../libpcap0.7_0.7.2-7_i386.deb) ...
Selecting previously deselected package sysklogd.
Unpacking sysklogd (from .../sysklogd_1.4.1-16_i386.deb) ...
Selecting previously deselected package tasksel.
Unpacking tasksel (from .../archives/tasksel_2.23_all.deb) ...
Selecting previously deselected package libtextwrap1.
Unpacking libtextwrap1 (from .../libtextwrap1_0.1-1_i386.deb) ...
Selecting previously deselected package tcpd.
Unpacking tcpd (from .../tcpd_7.6.dbs-6_i386.deb) ...
Selecting previously deselected package telnet.
Unpacking telnet (from .../telnet_0.17-26_i386.deb) ...
Selecting previously deselected package libtext-iconv-perl.
Unpacking libtext-iconv-perl (from .../libtext-iconv-perl_1.2-3_i386.deb) ...
Selecting previously deselected package wget.
Unpacking wget (from .../archives/wget_1.9.1-8_i386.deb) ...
Selecting previously deselected package pciutils.
Unpacking pciutils (from .../pciutils_1%3a2.1.11-15_i386.deb) ...
Selecting previously deselected package psmisc.
Unpacking psmisc (from .../psmisc_21.5-1_i386.deb) ...
Selecting previously deselected package ipchains.
Unpacking ipchains (from .../ipchains_1.3.10-15_i386.deb) ...
Selecting previously deselected package iptables.
Unpacking iptables (from .../iptables_1.2.11-8_i386.deb) ...
Setting up gettext-base (0.14.1-10) ...
Setting up libgdbm3 (1.8.3-2) ...
Setting up libtasn1-2 (0.2.10-3) ...
Setting up libgpg-error0 (1.0-1) ...
Setting up psmisc (21.5-1) ...
Setting up libssl0.9.7 (0.9.7e-2) ...
Setting up apt (0.5.28.1) ...
Setting up fdutils (5.4-20040228-1) ...
Keeping old fdmount setuid root settings.
Please note that you can run
'/usr/sbin/fdutilsconfig' to change them.
Setting up pciutils (2.1.11-15) ...
Setting up dhcp-client (2.0pl5-19.1) ...
Setting up zlib1g (1.2.2-3) ...
Setting up adduser (3.63) ...
Setting up manpages (1.70-1) ...
Setting up ed (0.2-20) ...
Setting up libtext-iconv-perl (1.2-3) ...
Setting up libpcap0.7 (0.7.2-7) ...
Setting up liblzo1 (1.08-1.2) ...
Setting up wget (1.9.1-8) ...
Setting up ipchains (1.3.10-15) ...
Setting up groff-base (1.18.1.1-6) ...
Setting up libdb4.2 (4.2.52-18) ...
Setting up net-tools (1.60-10) ...
Setting up bsdmainutils (6.0.17) ...
Setting up libsigc++-1.2-5c102 (1.2.5-4) ...
Setting up libpcre3 (4.5-1.1) ...
Setting up aptitude (0.2.15.8-1) ...
Setting up info (4.7-2.2) ...
Setting up iputils-ping (20020927-2) ...
Setting up cron (3.0pl1-86) ...
Adding group `crontab' (101)...
Done.
Starting periodic command scheduler: cron
Warning: Fake start-stop-daemon called, doing nothing
.
Setting up nano (1.2.4-3) ...
Setting up netkit-inetd (0.10-10) ...
Starting internet superserver: inetd
Warning: Fake start-stop-daemon called, doing nothing
.
Setting up libconsole (0.2.3dbs-56) ...
Setting up apt-utils (0.5.28.1) ...
Setting up iptables (1.2.11-8) ...
Setting up cpio (2.5-1.2) ...
Setting up nvi (1.79-22) ...
Setting up libwrap0 (7.6.dbs-6) ...
Setting up liblockfile1 (1.06) ...
Setting up tcpd (7.6.dbs-6) ...
Setting up exim4-config (4.44-2) ...
Adding system-user for exim (v4)
Setting up man-db (2.4.2-21) ...
Building database of manual pages ...
Setting up libgcrypt11 (1.2.0-4) ...
Setting up ifupdown (0.6.4-4.12) ...
mkdir: created directory `/etc/network/run'
Setting up tasksel (2.23) ...
Setting up logrotate (3.7-2) ...
Setting up libopencdk8 (0.5.5-10) ...
Setting up libgnutls11 (1.0.16-9) ...
Setting up netbase (4.20) ...
Setting up ppp (2.4.2+20040428-6) ...
Setting up pppoe (3.5-4) ...
Setting up pppoeconf (1.1) ...
Setting up exim4-base (4.44-2) ...
Setting up telnet (0.17-26) ...
Setting up exim4-daemon-light (4.44-2) ...
Starting MTA:
Warning: Fake start-stop-daemon called, doing nothing
exim4.
Setting up pppconfig (2.3.10) ...
Setting up mailx (8.1.2-0.20040524cvs-4) ...
Setting up at (3.1.8-11) ...
Starting deferred execution scheduler: atd
Warning: Fake start-stop-daemon called, doing nothing
.
Setting up exim4 (4.44-2) ...
Setting up console-data (2002.12.04dbs-49) ...
Looking for keymap to install:
NONE
Setting up sysklogd (1.4.1-16) ...
Stopping system log daemon: syslogd
Warning: Fake start-stop-daemon called, doing nothing
.
Starting system log daemon: syslogd
Warning: Fake start-stop-daemon called, doing nothing
.
Setting up klogd (1.4.1-16) ...
Stopping kernel log daemon: klogd
Warning: Fake start-stop-daemon called, doing nothing
.
Starting kernel log daemon: klogd
Warning: Fake start-stop-daemon called, doing nothing
.
Setting up console-tools (0.2.3dbs-56) ...
Setting up libtextwrap1 (0.1-1) ...
Setting up console-common (0.7.49) ...
Looking for keymap to install:
NONE
Setting up base-config (2.53.7) ...
umount: /target/dev/pts: Invalid argument
umount: /target/dev/shm: Invalid argument
umount: /target/proc/bus/usb: Invalid argument
Reading Package Lists...
Reading Package Lists...
Building Dependency Tree...
The following extra packages will be installed:
cramfsprogs dash
The following NEW packages will be installed:
cramfsprogs dash initrd-tools
Preconfiguring packages ...
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/132kB of archives.
After unpacking 438kB of additional disk space will be used.
Selecting previously deselected package dash.
(Reading database ... 7554 files and directories currently installed.)
Unpacking dash (from .../d/dash/dash_0.5.2-2_i386.deb) ...
Selecting previously deselected package cramfsprogs.
Unpacking cramfsprogs (from .../cramfsprogs_1.1-6_i386.deb) ...
Selecting previously deselected package initrd-tools.
Unpacking initrd-tools (from .../initrd-tools_0.1.77_all.deb) ...
Setting up dash (0.5.2-2) ...
Setting up cramfsprogs (1.1-6) ...
Setting up initrd-tools (0.1.77) ...
Reading Package Lists...
Building Dependency Tree...
The following extra packages will be installed:
module-init-tools
Suggested packages:
lilo grub kernel-doc-2.6.8 kernel-source-2.6.8
The following NEW packages will be installed:
kernel-image-2.6.8-2-386 module-init-tools
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/14.1MB of archives.
After unpacking 42.5MB of additional disk space will be used.
Selecting previously deselected package module-init-tools.
(Reading database ... 7588 files and directories currently installed.)
Unpacking module-init-tools (from .../module-init-tools_3.2-pre1-2_i386.deb) ...
Selecting previously deselected package kernel-image-2.6.8-2-386.
Unpacking kernel-image-2.6.8-2-386 (from .../kernel-image-2.6.8-2-386_2.6.8-13_i386.deb) ...
Setting up module-init-tools (3.2-pre1-2) ...
Setting up kernel-image-2.6.8-2-386 (2.6.8-13) ...
You are attempting to install a kernel version that is the same as
the version you are currently running (version 2.6.8-2-386). The modules
list is quite likely to have been changed, and the modules dependency
file /lib/modules/2.6.8-2-386/modules.dep needs to be re-built. It can
not be built correctly right now, since the module list for the
running kernel are likely to be different from the kernel installed.
I am creating a new modules.dep file, but that may not be
correct. It shall be regenerated correctly at next reboot.
I repeat: you have to reboot in order for the modules file to be
created correctly. Until you reboot, it may be impossible to load
some modules. Reboot as soon as this install is finished (Do not
reboot right now, since you may not be able to boot back up until
installation is over, but boot immediately after). I can not stress
that too much. You need to reboot soon.
Please Hit return to continue. /initrd.img does not exist. Installing from scratch, eh?
Or maybe you don't want a symbolic link here. Hmm? Lets See.
/vmlinuz does not exist. Installing from scratch, eh?
Or maybe you don't want a symbolic link here. Hmm? Lets See.
Reading Package Lists...
Building Dependency Tree...
E: Couldn't find package kernel-pcmcia-modules-2.6.8-2-386
Reading Package Lists...
Building Dependency Tree...
The following NEW packages will be installed:
locales
Preconfiguring packages ...
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/3982kB of archives.
After unpacking 10.6MB of additional disk space will be used.
Selecting previously deselected package locales.
(Reading database ... 9362 files and directories currently installed.)
Unpacking locales (from .../locales_2.3.2.ds1-20_all.deb) ...
Setting up locales (2.3.2.ds1-20) ...
Reading Package Lists...
Building Dependency Tree...
The following NEW packages will be installed:
iso-codes
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/1045kB of archives.
After unpacking 4624kB of additional disk space will be used.
Selecting previously deselected package iso-codes.
(Reading database ... 9834 files and directories currently installed.)
Unpacking iso-codes (from .../iso-codes_0.44-1_all.deb) ...
Setting up iso-codes (0.44-1) ...
Reading Package Lists...
Building Dependency Tree...
The following extra packages will be installed:
libapt-pkg-perl libconfig-inifiles-perl
The following NEW packages will be installed:
libapt-pkg-perl libconfig-inifiles-perl localization-config
Preconfiguring packages ...
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/175kB of archives.
After unpacking 848kB of additional disk space will be used.
Selecting previously deselected package libapt-pkg-perl.
(Reading database ... 10252 files and directories currently installed.)
Unpacking libapt-pkg-perl (from .../libapt-pkg-perl_0.1.13_i386.deb) ...
Selecting previously deselected package libconfig-inifiles-perl.
Unpacking libconfig-inifiles-perl (from .../libconfig-inifiles-perl_2.38-3_all.deb) ...
Selecting previously deselected package localization-config.
Unpacking localization-config (from .../localization-config_0.111_all.deb) ...
Setting up libapt-pkg-perl (0.1.13) ...
Setting up libconfig-inifiles-perl (2.38-3) ...
Setting up localization-config (0.111) ...
Reading Package Lists...
Building Dependency Tree...
The following extra packages will be installed:
discover1-data libdiscover1
The following NEW packages will be installed:
discover1 discover1-data libdiscover1
Preconfiguring packages ...
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/272kB of archives.
After unpacking 901kB of additional disk space will be used.
Selecting previously deselected package discover1-data.
(Reading database ... 10358 files and directories currently installed.)
Unpacking discover1-data (from .../discover1-data_1.2005.01.08_all.deb) ...
Selecting previously deselected package libdiscover1.
Unpacking libdiscover1 (from .../libdiscover1_1.7.7_i386.deb) ...
Selecting previously deselected package discover1.
Unpacking discover1 (from .../discover1_1.7.7_i386.deb) ...
Setting up discover1-data (1.2005.01.08) ...
Setting up libdiscover1 (1.7.7) ...
Setting up discover1 (1.7.7) ...
Reading Package Lists...
Building Dependency Tree...
Suggested packages:
ifrename
Recommended packages:
usbutils
The following NEW packages will be installed:
hotplug
Preconfiguring packages ...
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/66.7kB of archives.
After unpacking 393kB of additional disk space will be used.
Selecting previously deselected package hotplug.
(Reading database ... 10441 files and directories currently installed.)
Unpacking hotplug (from .../hotplug_0.0.20040329-17_all.deb) ...
Setting up hotplug (0.0.20040329-17) ...
Reading Package Lists...
Building Dependency Tree...
The following extra packages will be installed:
libusb-0.1-4
The following NEW packages will be installed:
libusb-0.1-4 usbutils
Preconfiguring packages ...
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/110kB of archives.
After unpacking 332kB of additional disk space will be used.
Selecting previously deselected package libusb-0.1-4.
(Reading database ... 10498 files and directories currently installed.)
Unpacking libusb-0.1-4 (from .../libusb-0.1-4_0.1.10a-6_i386.deb) ...
Selecting previously deselected package usbutils.
Unpacking usbutils (from .../usbutils_0.70-1_i386.deb) ...
Setting up libusb-0.1-4 (0.1.10a-6) ...
Setting up usbutils (0.70-1) ...
Reading Package Lists...
Building Dependency Tree...
Suggested packages:
cdtool setcd
The following NEW packages will be installed:
eject
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/31.0kB of archives.
After unpacking 111kB of additional disk space will be used.
Selecting previously deselected package eject.
(Reading database ... 10523 files and directories currently installed.)
Unpacking eject (from .../eject_2.0.13deb-8sarge2_i386.deb) ...
Setting up eject (2.0.13deb-8sarge2) ...
Reading Package Lists...
Building Dependency Tree...
The following NEW packages will be installed:
reiserfsprogs
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/472kB of archives.
After unpacking 1098kB of additional disk space will be used.
Selecting previously deselected package reiserfsprogs.
(Reading database ... 10539 files and directories currently installed.)
Unpacking reiserfsprogs (from .../reiserfsprogs_3.6.19-1_i386.deb) ...
Setting up reiserfsprogs (3.6.19-1) ...
Reading Package Lists...
Building Dependency Tree...
Suggested packages:
grub-doc grubconf
The following NEW packages will be installed:
grub
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/359kB of archives.
After unpacking 684kB of additional disk space will be used.
Selecting previously deselected package grub.
(Reading database ... 10568 files and directories currently installed.)
Unpacking grub (from .../grub_0.95+cvs20040624-15_i386.deb) ...
Setting up grub (0.95+cvs20040624-15) ...
Probing devices to guess BIOS drives. This may take a long time.
Installation finished. No error reported.
This is the contents of the device map /boot/grub/device.map.
Check if this is correct or not. If any of the lines is incorrect,
fix it and re-run the script `grub-install'.
(hd0) /dev/sda
Searching for GRUB installation directory ... found: /boot/grub .
Testing for an existing GRUB menu.list file...
Could not find /boot/grub/menu.lst file. Would you like /boot/grub/menu.lst generated for you? (y/N) Searching for splash image... none found, skipping...
Found kernel: /boot/vmlinuz-2.6.8-2-386
Updating /boot/grub/menu.lst ... done
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "C.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale 'it_IT@euro' not available
Generating locales...
it_IT.ISO-8859-15@euro... done
Generation complete.
Reading Package Lists...
Building Dependency Tree...
console-tools is already the newest version.
console-data is already the newest version.
console-common is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
/bin/partman: *******************************************************
/lib/partman/init.d/01unsupported: *******************************************************
/lib/partman/init.d/30parted: *******************************************************
parted_server: ======= Starting the server
parted_server: main_loop: iteration 1
parted_server: Opening infifo
/lib/partman/init.d/30parted: IN: OPEN =dev=scsi=host0=bus0=target0=lun0=disc /dev/scsi/host0/bus0/target0/lun0/disc
parted_server: Read command: OPEN
parted_server: command_open()
parted_server: Request to open =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: OK
parted_server: Note =dev=scsi=host0=bus0=target0=lun0=disc as unchanged
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 2
parted_server: Opening infifo
/lib/partman/init.d/31md-devices: *******************************************************
/lib/partman/init.d/35dump: *******************************************************
/lib/partman/init.d/35dump: IN: DUMP =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: DUMP
parted_server: command_dump()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 3
parted_server: Opening infifo
Device: yes
Model: ATA WDC WD360GD-00FN
Path: /dev/scsi/host0/bus0/target0/lun0/disc
Sector size: 512
Sectors: 72303840
Sectors/track: 63
Heads: 255
Cylinders: 4500
Partition table: yes
Type: msdos
Partitions: # id length type fs path name
(0,0,0) (4500,179,62) -1 0-37019566079 37019566080 pri/log free /dev/scsi/host0/bus0/target0/lun0/part-1
Dump finished.
/lib/partman/init.d/50lvm: *******************************************************
/lib/partman/init.d/50lvm: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: -1 0-37019566079 37019566080 pri/log free /dev/scsi/host0/bus0/target0/lun0/part-1
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 4
parted_server: Opening infifo
/lib/partman/init.d/51md: *******************************************************
/lib/partman/init.d/51md: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: -1 0-37019566079 37019566080 pri/log free /dev/scsi/host0/bus0/target0/lun0/part-1
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 5
parted_server: Opening infifo
/lib/partman/init.d/69no_media: *******************************************************
/lib/partman/init.d/70update_partitions: *******************************************************
/lib/partman/init.d/70update_partitions: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: -1 0-37019566079 37019566080 pri/log free /dev/scsi/host0/bus0/target0/lun0/part-1
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 6
parted_server: Opening infifo
/lib/partman/update.d/20bootable: *******************************************************
/lib/partman/update.d/20detected_filesystem: *******************************************************
/lib/partman/update.d/21lvm_sync_flag: *******************************************************
/lib/partman/update.d/22md_sync_flag: *******************************************************
/lib/partman/update.d/50filesystems: *******************************************************
/lib/partman/update.d/60basicmethods: *******************************************************
/lib/partman/update.d/60lvm_visuals: *******************************************************
/lib/partman/update.d/60swap: *******************************************************
/lib/partman/update.d/61md_visuals: *******************************************************
/lib/partman/valid_visuals.d/10type: *******************************************************
/lib/partman/valid_visuals.d/10type: IN: USES_EXTENDED =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: USES_EXTENDED
parted_server: command_uses_extended()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: yes
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 7
parted_server: Opening infifo
/lib/partman/valid_visuals.d/40name: *******************************************************
/lib/partman/valid_visuals.d/40name: IN: USES_NAMES =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: USES_NAMES
parted_server: command_uses_names()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: no
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 8
parted_server: Opening infifo
/lib/partman/visual.d/size: *******************************************************
/lib/partman/init.d/80autouse_swap: *******************************************************
/lib/partman/init.d/80autouse_swap: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: -1 0-37019566079 37019566080 pri/log free /dev/scsi/host0/bus0/target0/lun0/part-1
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 9
parted_server: Opening infifo
/lib/partman/init.d/99initial_auto: *******************************************************
/lib/partman/init.d/99initial_auto: *******************************************************
/lib/partman/automatically_partition/20biggest_free/choices: *******************************************************
/lib/partman/automatically_partition/20biggest_free/choices: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: -1 0-37019566079 37019566080 pri/log free /dev/scsi/host0/bus0/target0/lun0/part-1
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 10
parted_server: Opening infifo
/lib/partman/automatically_partition/50some_device/choices: *******************************************************
/lib/partman/automatically_partition/80custom/choices: *******************************************************
/lib/partman/automatically_partition/50some_device/do_option: *******************************************************
/bin/autopartition: *******************************************************
/bin/autopartition: IN: LABEL_TYPES =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: LABEL_TYPES
parted_server: command_label_types()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: bsd
parted_server: OUT: gpt
parted_server: OUT: mac
parted_server: OUT: dvh
parted_server: OUT: msdos
parted_server: OUT: pc98
parted_server: OUT: s390
parted_server: OUT: sun
parted_server: OUT: amiga
parted_server: OUT: loop
parted_server: OUT:
parted_server: Closing infifo and outfifo
/bin/autopartition: option: bsd
/bin/autopartition: option: gpt
/bin/autopartition: option: mac
/bin/autopartition: option: dvh
/bin/autopartition: option: msdos
/bin/autopartition: option: pc98
/bin/autopartition: option: s390
/bin/autopartition: option: sun
/bin/autopartition: option: amiga
/bin/autopartition: option: loop
parted_server: main_loop: iteration 11
parted_server: Opening infifo
/bin/autopartition: IN: NEW_LABEL =dev=scsi=host0=bus0=target0=lun0=disc msdos
parted_server: Read command: NEW_LABEL
parted_server: command_new_label()
parted_server: Note =dev=scsi=host0=bus0=target0=lun0=disc as changed
parted_server: Opening outfifo
parted_server: command_new_label: requested label with type msdos
parted_server: command_new_label: creating
parted_server: OUT: OK
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 12
parted_server: Opening infifo
/bin/autopartition: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: -1 0-37019566079 37019566080 pri/log free /dev/scsi/host0/bus0/target0/lun0/part-1
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 13
parted_server: Opening infifo
/bin/perform_recipe: *******************************************************
/bin/perform_recipe: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: -1 0-37019566079 37019566080 pri/log free /dev/scsi/host0/bus0/target0/lun0/part-1
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 14
parted_server: Opening infifo
/bin/perform_recipe: IN: PARTITION_INFO =dev=scsi=host0=bus0=target0=lun0=disc 0-37019566079
parted_server: Read command: PARTITION_INFO
parted_server: command_partition_info()
parted_server: Opening outfifo
parted_server: command_partition_info: info for partition with id 0-37019566079
parted_server: partition_with_id(0-37019566079)
parted_server: OUT: OK
parted_server: command_partition_info: partition found
parted_server: OUT: -1 0-37019566079 37019566080 pri/log free /dev/scsi/host0/bus0/target0/lun0/part-1
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 15
parted_server: Opening infifo
/lib/partman/update.d/20bootable: *******************************************************
/lib/partman/update.d/20detected_filesystem: *******************************************************
/lib/partman/update.d/21lvm_sync_flag: *******************************************************
/lib/partman/update.d/22md_sync_flag: *******************************************************
/lib/partman/update.d/50filesystems: *******************************************************
/lib/partman/update.d/60basicmethods: *******************************************************
/lib/partman/update.d/60lvm_visuals: *******************************************************
/lib/partman/update.d/60swap: *******************************************************
/lib/partman/update.d/61md_visuals: *******************************************************
/lib/partman/valid_visuals.d/10type: *******************************************************
/lib/partman/valid_visuals.d/10type: IN: USES_EXTENDED =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: USES_EXTENDED
parted_server: command_uses_extended()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: yes
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 16
parted_server: Opening infifo
/lib/partman/valid_visuals.d/40name: *******************************************************
/lib/partman/valid_visuals.d/40name: IN: USES_NAMES =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: USES_NAMES
parted_server: command_uses_names()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: no
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 17
parted_server: Opening infifo
/lib/partman/visual.d/size: *******************************************************
/bin/perform_recipe: IN: PARTITION_INFO =dev=scsi=host0=bus0=target0=lun0=disc 0-37019566079
parted_server: Read command: PARTITION_INFO
parted_server: command_partition_info()
parted_server: Opening outfifo
parted_server: command_partition_info: info for partition with id 0-37019566079
parted_server: partition_with_id(0-37019566079)
parted_server: OUT: OK
parted_server: command_partition_info: partition found
parted_server: OUT: -1 0-37019566079 37019566080 pri/log free /dev/scsi/host0/bus0/target0/lun0/part-1
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 18
parted_server: Opening infifo
/bin/perform_recipe: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: -1 0-37019566079 37019566080 pri/log free /dev/scsi/host0/bus0/target0/lun0/part-1
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 19
parted_server: Opening infifo
/bin/perform_recipe: IN: NEW_PARTITION =dev=scsi=host0=bus0=target0=lun0=disc primary ext3 0-37019566079 beginning 35482000001
parted_server: Read command: NEW_PARTITION
parted_server: command_new_partition()
parted_server: Note =dev=scsi=host0=bus0=target0=lun0=disc as changed
parted_server: Opening outfifo
parted_server: requested partition with type primary
parted_server: requested partition with file system ext3
parted_server: add_primary_partition(disk(72303840),0-69300781)
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary ext3 /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 20
parted_server: Opening infifo
/bin/perform_recipe: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary ext3 /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: -1 35483857920-37013759999 1529902080 pri/log free /dev/scsi/host0/bus0/target0/lun0/part-1
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 21
parted_server: Opening infifo
/bin/perform_recipe: IN: PARTITION_INFO =dev=scsi=host0=bus0=target0=lun0=disc 35483857920-37013759999
parted_server: Read command: PARTITION_INFO
parted_server: command_partition_info()
parted_server: Opening outfifo
parted_server: command_partition_info: info for partition with id 35483857920-37013759999
parted_server: partition_with_id(35483857920-37013759999)
parted_server: OUT: OK
parted_server: command_partition_info: partition found
parted_server: OUT: -1 35483857920-37013759999 1529902080 pri/log free /dev/scsi/host0/bus0/target0/lun0/part-1
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 22
parted_server: Opening infifo
/bin/perform_recipe: IN: GET_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(32256-35483857919)
parted_server: Partition found (32256-35483857919)
parted_server: OUT: OK
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 23
parted_server: Opening infifo
/bin/perform_recipe: IN: SET_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: SET_FLAGS
parted_server: command_set_flags()
parted_server: Note =dev=scsi=host0=bus0=target0=lun0=disc as changed
parted_server: Opening outfifo
parted_server: partition_with_id(32256-35483857919)
parted_server: Partition found (32256-35483857919)
parted_server: OUT: OK
/bin/perform_recipe: IN:
/bin/perform_recipe: IN: boot
parted_server: Processing flag boot
parted_server: The flag set true.
/bin/perform_recipe: IN: NO_MORE
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 24
parted_server: Opening infifo
/bin/perform_recipe: IN: PARTITION_INFO =dev=scsi=host0=bus0=target0=lun0=disc 35483857920-37013759999
parted_server: Read command: PARTITION_INFO
parted_server: command_partition_info()
parted_server: Opening outfifo
parted_server: command_partition_info: info for partition with id 35483857920-37013759999
parted_server: partition_with_id(35483857920-37013759999)
parted_server: OUT: OK
parted_server: command_partition_info: partition found
parted_server: OUT: -1 35483857920-37013759999 1529902080 pri/log free /dev/scsi/host0/bus0/target0/lun0/part-1
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 25
parted_server: Opening infifo
/bin/perform_recipe: IN: NEW_PARTITION =dev=scsi=host0=bus0=target0=lun0=disc logical linux-swap 35483857920-37013759999 full 1536000001
parted_server: Read command: NEW_PARTITION
parted_server: command_new_partition()
parted_server: Note =dev=scsi=host0=bus0=target0=lun0=disc as changed
parted_server: Opening outfifo
parted_server: requested partition with type logical
parted_server: requested partition with file system linux-swap
parted_server: OUT: OK
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 26
parted_server: Opening infifo
/bin/perform_recipe: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary ext3 /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 27
parted_server: Opening infifo
/bin/perform_recipe: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary ext3 /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 28
parted_server: Opening infifo
/bin/perform_recipe: IN: PARTITION_INFO =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: PARTITION_INFO
parted_server: command_partition_info()
parted_server: Opening outfifo
parted_server: command_partition_info: info for partition with id 32256-35483857919
parted_server: partition_with_id(32256-35483857919)
parted_server: OUT: OK
parted_server: command_partition_info: partition found
parted_server: OUT: 1 32256-35483857919 35483825664 primary ext3 /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 29
parted_server: Opening infifo
/lib/partman/update.d/20bootable: *******************************************************
/lib/partman/update.d/20bootable: IN: GET_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(32256-35483857919)
parted_server: Partition found (32256-35483857919)
parted_server: OUT: OK
parted_server: OUT: boot
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 30
parted_server: Opening infifo
/lib/partman/update.d/20detected_filesystem: *******************************************************
/lib/partman/update.d/21lvm_sync_flag: *******************************************************
/lib/partman/update.d/21lvm_sync_flag: IN: GET_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(32256-35483857919)
parted_server: Partition found (32256-35483857919)
parted_server: OUT: OK
parted_server: OUT: boot
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 31
parted_server: Opening infifo
/lib/partman/update.d/22md_sync_flag: *******************************************************
/lib/partman/update.d/22md_sync_flag: IN: GET_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(32256-35483857919)
parted_server: Partition found (32256-35483857919)
parted_server: OUT: OK
parted_server: OUT: boot
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 32
parted_server: Opening infifo
/lib/partman/update.d/50filesystems: *******************************************************
/lib/partman/update.d/50filesystems: IN: PARTITION_INFO =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: PARTITION_INFO
parted_server: command_partition_info()
parted_server: Opening outfifo
parted_server: command_partition_info: info for partition with id 32256-35483857919
parted_server: partition_with_id(32256-35483857919)
parted_server: OUT: OK
parted_server: command_partition_info: partition found
parted_server: OUT: 1 32256-35483857919 35483825664 primary ext3 /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 33
parted_server: Opening infifo
/lib/partman/update.d/60basicmethods: *******************************************************
/lib/partman/update.d/60lvm_visuals: *******************************************************
/lib/partman/update.d/60swap: *******************************************************
/lib/partman/update.d/61md_visuals: *******************************************************
/lib/partman/visual.d/size: *******************************************************
/bin/perform_recipe: IN: PARTITION_INFO =dev=scsi=host0=bus0=target0=lun0=disc 35483890176-37013759999
parted_server: Read command: PARTITION_INFO
parted_server: command_partition_info()
parted_server: Opening outfifo
parted_server: command_partition_info: info for partition with id 35483890176-37013759999
parted_server: partition_with_id(35483890176-37013759999)
parted_server: OUT: OK
parted_server: command_partition_info: partition found
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 34
parted_server: Opening infifo
/lib/partman/update.d/20bootable: *******************************************************
/lib/partman/update.d/20bootable: IN: GET_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 35483890176-37013759999
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(35483890176-37013759999)
parted_server: Partition found (35483890176-37013759999)
parted_server: OUT: OK
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 35
parted_server: Opening infifo
/lib/partman/update.d/20detected_filesystem: *******************************************************
/lib/partman/update.d/21lvm_sync_flag: *******************************************************
/lib/partman/update.d/21lvm_sync_flag: IN: GET_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 35483890176-37013759999
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(35483890176-37013759999)
parted_server: Partition found (35483890176-37013759999)
parted_server: OUT: OK
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 36
parted_server: Opening infifo
/lib/partman/update.d/22md_sync_flag: *******************************************************
/lib/partman/update.d/22md_sync_flag: IN: GET_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 35483890176-37013759999
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(35483890176-37013759999)
parted_server: Partition found (35483890176-37013759999)
parted_server: OUT: OK
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 37
parted_server: Opening infifo
/lib/partman/update.d/50filesystems: *******************************************************
/lib/partman/update.d/60basicmethods: *******************************************************
/lib/partman/update.d/60lvm_visuals: *******************************************************
/lib/partman/update.d/60swap: *******************************************************
/lib/partman/update.d/60swap: IN: CHANGE_FILE_SYSTEM =dev=scsi=host0=bus0=target0=lun0=disc 35483890176-37013759999 linux-swap
parted_server: Read command: CHANGE_FILE_SYSTEM
parted_server: Opening outfifo
parted_server: command_change_file_system(35483890176-37013759999,linux-swap)
parted_server: partition_with_id(35483890176-37013759999)
parted_server: OUT: OK
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 38
parted_server: Opening infifo
/lib/partman/update.d/61md_visuals: *******************************************************
/lib/partman/visual.d/size: *******************************************************
/lib/partman/choose_partition/60partition_tree/choices: *******************************************************
/lib/partman/choose_partition/60partition_tree/choices: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary ext3 /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
/lib/partman/choose_partition/60partition_tree/choices: paragraph: 1 32256-35483857919 35483825664 primary ext3 /dev/scsi/host0/bus0/target0/lun0/part1
/lib/partman/choose_partition/60partition_tree/choices: paragraph: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: main_loop: iteration 39
parted_server: Opening infifo
/lib/partman/choose_partition/60partition_tree/do_option: *******************************************************
/lib/partman/choose_partition/60partition_tree/do_option: IN: PARTITION_INFO =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: PARTITION_INFO
parted_server: command_partition_info()
parted_server: Opening outfifo
parted_server: command_partition_info: info for partition with id 32256-35483857919
parted_server: partition_with_id(32256-35483857919)
parted_server: OUT: OK
parted_server: command_partition_info: partition found
parted_server: OUT: 1 32256-35483857919 35483825664 primary ext3 /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 40
parted_server: Opening infifo
/lib/partman/active_partition/10change_name/choices: *******************************************************
/lib/partman/active_partition/10change_name/choices: IN: USES_NAMES =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: USES_NAMES
parted_server: command_uses_names()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: no
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 41
parted_server: Opening infifo
/lib/partman/active_partition/15method/choices: *******************************************************
/lib/partman/active_partition/65toggle_bootable/choices: *******************************************************
/lib/partman/active_partition/65toggle_bootable/choices: IN: VALID_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: VALID_FLAGS
parted_server: command_valid_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(32256-35483857919)
parted_server: OUT: OK
parted_server: Partition found (32256-35483857919)
parted_server: OUT: boot
parted_server: OUT: hidden
parted_server: OUT: raid
parted_server: OUT: lvm
parted_server: OUT: lba
parted_server: OUT: palo
parted_server: OUT: prep
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 42
parted_server: Opening infifo
/lib/partman/active_partition/65toggle_bootable/choices: IN: GET_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(32256-35483857919)
parted_server: Partition found (32256-35483857919)
parted_server: OUT: OK
parted_server: OUT: boot
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 43
parted_server: Opening infifo
/lib/partman/active_partition/70resize/choices: *******************************************************
/lib/partman/active_partition/70resize/choices: IN: PARTITION_INFO =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: PARTITION_INFO
parted_server: command_partition_info()
parted_server: Opening outfifo
parted_server: command_partition_info: info for partition with id 32256-35483857919
parted_server: partition_with_id(32256-35483857919)
parted_server: OUT: OK
parted_server: command_partition_info: partition found
parted_server: OUT: 1 32256-35483857919 35483825664 primary ext3 /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 44
parted_server: Opening infifo
/lib/partman/active_partition/15method/do_option: *******************************************************
/lib/partman/choose_method/50lvm/choices: *******************************************************
/lib/partman/choose_method/50lvm/choices: IN: VALID_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: VALID_FLAGS
parted_server: command_valid_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(32256-35483857919)
parted_server: OUT: OK
parted_server: Partition found (32256-35483857919)
parted_server: OUT: boot
parted_server: OUT: hidden
parted_server: OUT: raid
parted_server: OUT: lvm
parted_server: OUT: lba
parted_server: OUT: palo
parted_server: OUT: prep
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 45
parted_server: Opening infifo
/lib/partman/choose_method/51md/choices: *******************************************************
/lib/partman/choose_method/51md/choices: IN: VALID_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: VALID_FLAGS
parted_server: command_valid_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(32256-35483857919)
parted_server: OUT: OK
parted_server: Partition found (32256-35483857919)
parted_server: OUT: boot
parted_server: OUT: hidden
parted_server: OUT: raid
parted_server: OUT: lvm
parted_server: OUT: lba
parted_server: OUT: palo
parted_server: OUT: prep
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 46
parted_server: Opening infifo
/lib/partman/choose_method/25filesystem/do_option: *******************************************************
/lib/partman/choose_method/25filesystem/do_option: IN: PARTITION_INFO =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: PARTITION_INFO
parted_server: command_partition_info()
parted_server: Opening outfifo
parted_server: command_partition_info: info for partition with id 32256-35483857919
parted_server: partition_with_id(32256-35483857919)
parted_server: OUT: OK
parted_server: command_partition_info: partition found
parted_server: OUT: 1 32256-35483857919 35483825664 primary ext3 /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 47
parted_server: Opening infifo
/lib/partman/update.d/20bootable: *******************************************************
/lib/partman/update.d/20bootable: IN: GET_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(32256-35483857919)
parted_server: Partition found (32256-35483857919)
parted_server: OUT: OK
parted_server: OUT: boot
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 48
parted_server: Opening infifo
/lib/partman/update.d/20detected_filesystem: *******************************************************
/lib/partman/update.d/21lvm_sync_flag: *******************************************************
/lib/partman/update.d/21lvm_sync_flag: IN: GET_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(32256-35483857919)
parted_server: Partition found (32256-35483857919)
parted_server: OUT: OK
parted_server: OUT: boot
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 49
parted_server: Opening infifo
/lib/partman/update.d/22md_sync_flag: *******************************************************
/lib/partman/update.d/22md_sync_flag: IN: GET_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(32256-35483857919)
parted_server: Partition found (32256-35483857919)
parted_server: OUT: OK
parted_server: OUT: boot
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 50
parted_server: Opening infifo
/lib/partman/update.d/50filesystems: *******************************************************
/lib/partman/update.d/50filesystems: IN: PARTITION_INFO =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: PARTITION_INFO
parted_server: command_partition_info()
parted_server: Opening outfifo
parted_server: command_partition_info: info for partition with id 32256-35483857919
parted_server: partition_with_id(32256-35483857919)
parted_server: OUT: OK
parted_server: command_partition_info: partition found
parted_server: OUT: 1 32256-35483857919 35483825664 primary ext3 /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 51
parted_server: Opening infifo
/lib/partman/update.d/50filesystems: IN: CHANGE_FILE_SYSTEM =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919 reiserfs
parted_server: Read command: CHANGE_FILE_SYSTEM
parted_server: Opening outfifo
parted_server: command_change_file_system(32256-35483857919,reiserfs)
parted_server: partition_with_id(32256-35483857919)
parted_server: OUT: OK
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 52
parted_server: Opening infifo
/lib/partman/update.d/60basicmethods: *******************************************************
/lib/partman/update.d/60lvm_visuals: *******************************************************
/lib/partman/update.d/60swap: *******************************************************
/lib/partman/update.d/61md_visuals: *******************************************************
/lib/partman/visual.d/size: *******************************************************
/lib/partman/active_partition/15method/do_option: IN: PARTITION_INFO =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: PARTITION_INFO
parted_server: command_partition_info()
parted_server: Opening outfifo
parted_server: command_partition_info: info for partition with id 32256-35483857919
parted_server: partition_with_id(32256-35483857919)
parted_server: OUT: OK
parted_server: command_partition_info: partition found
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 53
parted_server: Opening infifo
/lib/partman/update.d/20bootable: *******************************************************
/lib/partman/update.d/20bootable: IN: GET_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(32256-35483857919)
parted_server: Partition found (32256-35483857919)
parted_server: OUT: OK
parted_server: OUT: boot
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 54
parted_server: Opening infifo
/lib/partman/update.d/20detected_filesystem: *******************************************************
/lib/partman/update.d/21lvm_sync_flag: *******************************************************
/lib/partman/update.d/21lvm_sync_flag: IN: GET_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(32256-35483857919)
parted_server: Partition found (32256-35483857919)
parted_server: OUT: OK
parted_server: OUT: boot
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 55
parted_server: Opening infifo
/lib/partman/update.d/22md_sync_flag: *******************************************************
/lib/partman/update.d/22md_sync_flag: IN: GET_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(32256-35483857919)
parted_server: Partition found (32256-35483857919)
parted_server: OUT: OK
parted_server: OUT: boot
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 56
parted_server: Opening infifo
/lib/partman/update.d/50filesystems: *******************************************************
/lib/partman/update.d/50filesystems: IN: PARTITION_INFO =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: PARTITION_INFO
parted_server: command_partition_info()
parted_server: Opening outfifo
parted_server: command_partition_info: info for partition with id 32256-35483857919
parted_server: partition_with_id(32256-35483857919)
parted_server: OUT: OK
parted_server: command_partition_info: partition found
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 57
parted_server: Opening infifo
/lib/partman/update.d/60basicmethods: *******************************************************
/lib/partman/update.d/60lvm_visuals: *******************************************************
/lib/partman/update.d/60swap: *******************************************************
/lib/partman/update.d/61md_visuals: *******************************************************
/lib/partman/visual.d/size: *******************************************************
/lib/partman/active_partition/10change_name/choices: *******************************************************
/lib/partman/active_partition/10change_name/choices: IN: USES_NAMES =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: USES_NAMES
parted_server: command_uses_names()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: no
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 58
parted_server: Opening infifo
/lib/partman/active_partition/15method/choices: *******************************************************
/lib/partman/active_partition/65toggle_bootable/choices: *******************************************************
/lib/partman/active_partition/65toggle_bootable/choices: IN: VALID_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: VALID_FLAGS
parted_server: command_valid_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(32256-35483857919)
parted_server: OUT: OK
parted_server: Partition found (32256-35483857919)
parted_server: OUT: boot
parted_server: OUT: hidden
parted_server: OUT: raid
parted_server: OUT: lvm
parted_server: OUT: lba
parted_server: OUT: palo
parted_server: OUT: prep
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 59
parted_server: Opening infifo
/lib/partman/active_partition/65toggle_bootable/choices: IN: GET_FLAGS =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(32256-35483857919)
parted_server: Partition found (32256-35483857919)
parted_server: OUT: OK
parted_server: OUT: boot
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 60
parted_server: Opening infifo
/lib/partman/active_partition/70resize/choices: *******************************************************
/lib/partman/active_partition/70resize/choices: IN: PARTITION_INFO =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: PARTITION_INFO
parted_server: command_partition_info()
parted_server: Opening outfifo
parted_server: command_partition_info: info for partition with id 32256-35483857919
parted_server: partition_with_id(32256-35483857919)
parted_server: OUT: OK
parted_server: command_partition_info: partition found
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 61
parted_server: Opening infifo
/lib/partman/choose_partition/60partition_tree/choices: *******************************************************
/lib/partman/choose_partition/60partition_tree/choices: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
/lib/partman/choose_partition/60partition_tree/choices: paragraph: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
/lib/partman/choose_partition/60partition_tree/choices: paragraph: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: main_loop: iteration 62
parted_server: Opening infifo
/bin/partman: IN: IS_CHANGED =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: IS_CHANGED
parted_server: command_is_changed(=dev=scsi=host0=bus0=target0=lun0=disc)
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: yes
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 63
parted_server: Opening infifo
/bin/partman: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 64
parted_server: Opening infifo
/lib/partman/commit.d/30parted: *******************************************************
/lib/partman/commit.d/30parted: IN: COMMIT =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: COMMIT
parted_server: command_commit()
parted_server: Opening outfifo
parted_server: Note =dev=scsi=host0=bus0=target0=lun0=disc as unchanged
parted_server: OUT: OK
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 65
parted_server: Opening infifo
/lib/partman/commit.d/45format_swap: *******************************************************
/lib/partman/commit.d/45format_swap: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 66
parted_server: Opening infifo
/lib/partman/commit.d/45format_swap: Try to format swap space in /var/lib/partman/devices/=dev=scsi=host0=bus0=target0=lun0=disc/35483890176-37013759999
/lib/partman/commit.d/45format_swap: IN: PARTITION_INFO =dev=scsi=host0=bus0=target0=lun0=disc 35483890176-37013759999
parted_server: Read command: PARTITION_INFO
parted_server: command_partition_info()
parted_server: Opening outfifo
parted_server: command_partition_info: info for partition with id 35483890176-37013759999
parted_server: partition_with_id(35483890176-37013759999)
parted_server: OUT: OK
parted_server: command_partition_info: partition found
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 67
parted_server: Opening infifo
/lib/partman/commit.d/45format_swap: IN: CREATE_FILE_SYSTEM =dev=scsi=host0=bus0=target0=lun0=disc 35483890176-37013759999 linux-swap
parted_server: Read command: CREATE_FILE_SYSTEM
parted_server: Note =dev=scsi=host0=bus0=target0=lun0=disc as changed
parted_server: Opening outfifo
parted_server: command_create_file_system(35483890176-37013759999,linux-swap)
parted_server: partition_with_id(35483890176-37013759999)
parted_server: OUT: Timer
parted_server: OUT: 0 (null)
/lib/partman/commit.d/45format_swap: error_handler: exception with type Timer
parted_server: OUT: ready
parted_server: OUT: OK
parted_server: OUT: OK
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 68
parted_server: Opening infifo
/lib/partman/commit.d/50format_basicfilesystems: *******************************************************
/lib/partman/commit.d/50format_basicfilesystems: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 69
parted_server: Opening infifo
/lib/partman/commit.d/50format_basicfilesystems: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 70
parted_server: Opening infifo
/lib/partman/commit.d/50format_ext3: *******************************************************
/lib/partman/commit.d/50format_ext3: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 71
parted_server: Opening infifo
/lib/partman/commit.d/50format_ext3: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 72
parted_server: Opening infifo
/lib/partman/commit.d/50format_jfs: *******************************************************
/lib/partman/commit.d/50format_jfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 73
parted_server: Opening infifo
/lib/partman/commit.d/50format_jfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 74
parted_server: Opening infifo
/lib/partman/commit.d/50format_reiserfs: *******************************************************
/lib/partman/commit.d/50format_reiserfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 75
parted_server: Opening infifo
/lib/partman/commit.d/50format_reiserfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 76
parted_server: Opening infifo
/lib/partman/commit.d/50format_reiserfs: Try to create file system for /var/lib/partman/devices/=dev=scsi=host0=bus0=target0=lun0=disc/32256-35483857919
/lib/partman/commit.d/50format_reiserfs: IN: PARTITION_INFO =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919
parted_server: Read command: PARTITION_INFO
parted_server: command_partition_info()
parted_server: Opening outfifo
parted_server: command_partition_info: info for partition with id 32256-35483857919
parted_server: partition_with_id(32256-35483857919)
parted_server: OUT: OK
parted_server: command_partition_info: partition found
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 77
parted_server: Opening infifo
/lib/partman/commit.d/50format_reiserfs: IN: CREATE_FILE_SYSTEM =dev=scsi=host0=bus0=target0=lun0=disc 32256-35483857919 reiserfs
parted_server: Read command: CREATE_FILE_SYSTEM
parted_server: Note =dev=scsi=host0=bus0=target0=lun0=disc as changed
parted_server: Opening outfifo
parted_server: command_create_file_system(32256-35483857919,reiserfs)
parted_server: partition_with_id(32256-35483857919)
parted_server: OUT: Timer
parted_server: OUT: 0 (null)
parted_server: OUT: ready
parted_server: OUT: OK
parted_server: OUT: failed
parted_server: Closing infifo and outfifo
/lib/partman/commit.d/50format_reiserfs: error_handler: exception with type Timer
parted_server: main_loop: iteration 78
parted_server: Opening infifo
/lib/partman/commit.d/50format_xfs: *******************************************************
/lib/partman/commit.d/50format_xfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 79
parted_server: Opening infifo
/lib/partman/commit.d/50format_xfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 80
parted_server: Opening infifo
/lib/partman/finish.d/05proper_mountpoints: *******************************************************
/lib/partman/fstab.d/basic: *******************************************************
/lib/partman/fstab.d/basic: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 81
parted_server: Opening infifo
/lib/partman/fstab.d/ext3: *******************************************************
/lib/partman/fstab.d/ext3: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 82
parted_server: Opening infifo
/lib/partman/fstab.d/jfs: *******************************************************
/lib/partman/fstab.d/jfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 83
parted_server: Opening infifo
/lib/partman/fstab.d/reiserfs: *******************************************************
/lib/partman/fstab.d/reiserfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 84
parted_server: Opening infifo
/lib/partman/fstab.d/reiserfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 85
parted_server: Opening infifo
/lib/partman/fstab.d/xfs: *******************************************************
/lib/partman/fstab.d/xfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 86
parted_server: Opening infifo
/lib/partman/fstab.d/basic: *******************************************************
/lib/partman/fstab.d/basic: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 87
parted_server: Opening infifo
/lib/partman/fstab.d/ext3: *******************************************************
/lib/partman/fstab.d/ext3: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 88
parted_server: Opening infifo
/lib/partman/fstab.d/jfs: *******************************************************
/lib/partman/fstab.d/jfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 89
parted_server: Opening infifo
/lib/partman/fstab.d/reiserfs: *******************************************************
/lib/partman/fstab.d/reiserfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 90
parted_server: Opening infifo
/lib/partman/fstab.d/reiserfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 91
parted_server: Opening infifo
/lib/partman/fstab.d/xfs: *******************************************************
/lib/partman/fstab.d/xfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 92
parted_server: Opening infifo
/lib/partman/finish.d/07basic_method_only: *******************************************************
/lib/partman/finish.d/07basic_method_only: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 93
parted_server: Opening infifo
/lib/partman/finish.d/09nomountpoint_basicfilesystems: *******************************************************
/lib/partman/finish.d/09nomountpoint_basicfilesystems: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 94
parted_server: Opening infifo
/lib/partman/finish.d/09nomountpoint_ext3: *******************************************************
/lib/partman/finish.d/09nomountpoint_ext3: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 95
parted_server: Opening infifo
/lib/partman/finish.d/09nomountpoint_jfs: *******************************************************
/lib/partman/finish.d/09nomountpoint_jfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 96
parted_server: Opening infifo
/lib/partman/finish.d/09nomountpoint_reiserfs: *******************************************************
/lib/partman/finish.d/09nomountpoint_reiserfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 97
parted_server: Opening infifo
/lib/partman/finish.d/09nomountpoint_xfs: *******************************************************
/lib/partman/finish.d/09nomountpoint_xfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 98
parted_server: Opening infifo
/lib/partman/finish.d/10check_basicfilesystems: *******************************************************
/lib/partman/finish.d/10check_basicfilesystems: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 99
parted_server: Opening infifo
/lib/partman/finish.d/10check_swap: *******************************************************
/lib/partman/finish.d/10check_swap: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 100
parted_server: Opening infifo
/lib/partman/finish.d/20mount_partitions: *******************************************************
/lib/partman/fstab.d/basic: *******************************************************
/lib/partman/fstab.d/basic: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 101
parted_server: Opening infifo
/lib/partman/fstab.d/ext3: *******************************************************
/lib/partman/fstab.d/ext3: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 102
parted_server: Opening infifo
/lib/partman/fstab.d/jfs: *******************************************************
/lib/partman/fstab.d/jfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 103
parted_server: Opening infifo
/lib/partman/fstab.d/reiserfs: *******************************************************
/lib/partman/fstab.d/reiserfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 104
parted_server: Opening infifo
/lib/partman/fstab.d/reiserfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 105
parted_server: Opening infifo
/lib/partman/fstab.d/xfs: *******************************************************
/lib/partman/fstab.d/xfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 106
parted_server: Opening infifo
/lib/partman/fstab.d/basic: *******************************************************
/lib/partman/fstab.d/basic: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 107
parted_server: Opening infifo
/lib/partman/fstab.d/ext3: *******************************************************
/lib/partman/fstab.d/ext3: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 108
parted_server: Opening infifo
/lib/partman/fstab.d/jfs: *******************************************************
/lib/partman/fstab.d/jfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 109
parted_server: Opening infifo
/lib/partman/fstab.d/reiserfs: *******************************************************
/lib/partman/fstab.d/reiserfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 110
parted_server: Opening infifo
/lib/partman/fstab.d/reiserfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 111
parted_server: Opening infifo
/lib/partman/fstab.d/xfs: *******************************************************
/lib/partman/fstab.d/xfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 112
parted_server: Opening infifo
/lib/partman/finish.d/70aptinstall_basicfilesystems: *******************************************************
/lib/partman/finish.d/70aptinstall_basicfilesystems: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 113
parted_server: Opening infifo
/lib/partman/finish.d/70aptinstall_ext3: *******************************************************
/lib/partman/finish.d/70aptinstall_ext3: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 114
parted_server: Opening infifo
/lib/partman/finish.d/70aptinstall_jfs: *******************************************************
/lib/partman/finish.d/70aptinstall_jfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 115
parted_server: Opening infifo
/lib/partman/finish.d/70aptinstall_reiserfs: *******************************************************
/lib/partman/finish.d/70aptinstall_reiserfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 116
parted_server: Opening infifo
/lib/partman/finish.d/70aptinstall_xfs: *******************************************************
/lib/partman/finish.d/70aptinstall_xfs: IN: PARTITIONS =dev=scsi=host0=bus0=target0=lun0=disc
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-35483857919 35483825664 primary reiserfs /dev/scsi/host0/bus0/target0/lun0/part1
parted_server: OUT: 5 35483890176-37013759999 1529869824 logical linux-swap /dev/scsi/host0/bus0/target0/lun0/part5
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 117
parted_server: Opening infifo
/lib/partman/finish.d/80parted: *******************************************************
/lib/partman/finish.d/80parted: IN: QUIT
parted_server: Read command: QUIT
parted_server: Quitting
Package: languagechooser
Status: install ok installed
Version: 1.45
Depends: cdebconf-udeb
Description: Choose language
installer-menu-item: 10
Package: udpkg
Status: install ok unpacked
Version: 1.00
Depends: libc6 (>= 2.3.2.ds1-4), libdebian-installer4 (>= 0.29)
Description: Tiny dpkg clone
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.2.ds1-20
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.03
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
installer-menu-item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.07
Description: detect low-memory systems and enter lowmem mode
Package: console-keymaps-usb
Status: install ok installed
Version: 2002.12.04dbs-49
Provides: console-keymaps
Description: Keymaps for USB keyboards
Package: cdrom-retriever
Status: install ok installed
Version: 1.03
Provides: retriever
Depends: cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.02
Depends: libc6 (>= 2.3.2.ds1-4), libdebconfclient0, libdebian-installer4 (>= 0.29)
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.08
Depends: libc6 (>= 2.3.2.ds1-4), libdebconfclient0, libdebian-installer4 (>= 0.29)
Description: Execute a shell
installer-menu-item: 950
Package: pcmcia-storage-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.8-2-386-di, ide-core-modules-2.6.8-2-386-di, cdrom-core-modules-2.6.8-2-386-di, pcmcia-modules-2.6.8-2-386-di
Description: PCMCIA storage drivers
Package: di-utils
Status: install ok unpacked
Version: 1.08
Description: Miscellaneous utilities for the debian installer
Package: fb-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: fb-modules
Depends: kernel-image-2.6.8-2-386-di
Description: Frame buffer support
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.72
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.2.ds1-4), libnewt0.51
Description: Newt frontend for Debian Configuration Management System
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2-pre1-2
Depends: libc6 (>= 2.3.2.ds1-4)
Description: tools for managing Linux kernel modules
Package: discover1-udeb
Status: install ok installed
Version: 1.7.7
Provides: discover
Depends: libc6 (>= 2.3.2.ds1-4), libdiscover1 (>= 1.6.1), discover1-data-udeb (>= 1.2004.09.24)
Description: hardware identification library (udeb)
Package: firewire-core-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.8-2-386-di, kernel-image-2.6.8-2-386-di
Description: Core FireWire drivers
Package: usb-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: usb-modules
Depends: kernel-image-2.6.8-2-386-di
Description: USB support
Package: rootskel
Status: install ok installed
Version: 1.10.3
Description: Skeleton root filesystem used by debian-installer
Package: sata-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: sata-modules
Depends: kernel-image-2.6.8-2-386-di, scsi-core-modules-2.6.8-2-386-di
Description: SATA drivers
Package: cdrom-core-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: cdrom-core-modules
Depends: kernel-image-2.6.8-2-386-di, scsi-core-modules-2.6.8-2-386-di, ide-modules-2.6.8-2-386-di
Description: CDROM support
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.4-6
Depends: libc-udeb
Description: Free Implementation of the Unicode BiDi algorithm
Package: discover1-data-udeb
Status: install ok installed
Version: 1.2005.01.08
Description: hardware lists for libdiscover1 (short list)
Package: usb-discover
Status: install ok unpacked
Version: 1.02
Description: Discover USB and load kernel modules
Package: parport-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: parport-modules
Depends: kernel-image-2.6.8-2-386-di
Description: Parallel port support
Package: nano-udeb
Status: install ok unpacked
Version: 1.2.4-3
Provides: editor
Depends: libc-udeb, slang1a-utf8-udeb
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.72
Depends: libc6 (>= 2.3.2.ds1-4), libdebian-installer4 (>= 0.29), libtextwrap1
Description: Debian Configuration Management System (C-implementation)
Package: load-cdrom
Status: install ok installed
Version: 1.03
Depends: cdrom-retriever, anna
Description: Load installer components from CD
installer-menu-item: 14
Package: usb-storage-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.8-2-386-di, scsi-core-modules-2.6.8-2-386-di, usb-modules-2.6.8-2-386-di
Description: USB storage support
Package: iso-3166-udeb
Status: install ok installed
Version: 0.44-1
Description: Provides iso_3166.tab file
Package: cdrom-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: cdrom-modules
Depends: ide-modules-2.6.8-2-386-di, cdrom-core-modules-2.6.8-2-386-di, kernel-image-2.6.8-2-386-di
Description: Esoteric CDROM drivers
Package: ide-core-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: ide-core-modules
Depends: kernel-image-2.6.8-2-386-di
Description: IDE support
Package: floppy-retriever
Status: install ok unpacked
Version: 1.05
Provides: retriever
Depends: cdebconf-udeb
Description: Fetches modules from a floppy
Package: pcmcia-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: pcmcia-modules
Depends: kernel-image-2.6.8-2-386-di
Description: Common PCMCIA drivers
Package: floppy-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: floppy-modules
Depends: kernel-image-2.6.8-2-386-di
Description: Floppy driver
Package: busybox-cvs-udeb
Status: install ok unpacked
Version: 20040623-1
Depends: libc6 (>= 2.3.2.ds1-4)
Description: Tiny utilities for the debian-installer
Package: archdetect
Status: install ok installed
Version: 1.14
Description: Hardware architecture detector
Package: input-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: input-modules
Depends: kernel-image-2.6.8-2-386-di, usb-modules-2.6.8-2-386-di
Description: Input devices support
Package: ide-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: ide-modules
Depends: kernel-image-2.6.8-2-386-di, ide-core-modules-2.6.8-2-386-di
Description: IDE drivers
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.08
Description: Reboot
installer-menu-item: 995
Package: anna
Status: install ok installed
Version: 1.06
Depends: cdebconf-udeb, archdetect
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: console-keymaps-at
Status: install ok installed
Version: 2002.12.04dbs-49
Provides: console-keymaps
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.08
Description: Terminfo entries needed by newt/slang in debian installer
Package: rootskel-locale
Status: install ok unpacked
Version: 1.10.3
Depends: rootskel
Description: UTF-8 locale used by debian-installer
Package: kernel-image-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: hw-detect
Status: install ok installed
Version: 1.14
Depends: discover, rootskel (>= 0.54), archdetect
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.10
Depends: libc6 (>= 2.3.2.ds1-4), libdebconfclient0, libdebian-installer4 (>= 0.29), console-keymaps, archdetect
Description: Detect a keyboard and select layout
installer-menu-item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.29
Provides: libdebian-installer4
Depends: libc6 (>= 2.3.2.ds1-4)
Description: Library of common debian-installer functions
Package: pcmcia-cs-udeb
Status: install ok unpacked
Version: 3.2.5-10
Description: PCMCIA Card Services for Linux (udeb)
Package: scsi-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: scsi-modules
Depends: kernel-image-2.6.8-2-386-di, scsi-core-modules-2.6.8-2-386-di, parport-modules-2.6.8-2-386-di, cdrom-core-modules-2.6.8-2-386-di, firmware-modules-2.6.8-2-386-di
Description: SCSI drivers
Package: fat-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: fat-modules
Depends: kernel-image-2.6.8-2-386-di
Description: FAT filesystem support
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.72
Depends: cdebconf-udeb
Description: Change debconf priority
installer-menu-item: 930
Package: file-preseed
Status: install ok unpacked
Version: 1.01
Depends: cdrom-detect, di-utils
Description: Load debconf preseed file
installer-menu-item: 14
Package: scsi-common-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: scsi-common-modules
Depends: kernel-image-2.6.8-2-386-di, scsi-core-modules-2.6.8-2-386-di, cdrom-core-modules-2.6.8-2-386-di
Description: Very common SCSI drivers
Package: scsi-core-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: scsi-core-modules
Depends: kernel-image-2.6.8-2-386-di
Description: Core SCSI subsystem
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.72
Provides: libdebconfclient0
Depends: libc6 (>= 2.3.2.ds1-4), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.1
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: firmware-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: firmware-modules
Depends: kernel-image-2.6.8-2-386-di
Description: Firmware request modules
Package: socket-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: socket-modules
Depends: kernel-image-2.6.8-2-386-di
Description: Socket drivers
Package: cdrom-detect
Status: install ok installed
Version: 1.05
Depends: hw-detect
Description: Detect CDROM devices and mount the CD
installer-menu-item: 14
Package: countrychooser
Status: install ok installed
Version: 1.11
Depends: cdebconf-udeb, iso-3166-udeb
Description: Choose country
installer-menu-item: 11
Package: acpi-modules-2.6.8-2-386-di
Status: install ok unpacked
Version: 1.02
Provides: acpi-modules
Depends: kernel-image-2.6.8-2-386-di
Description: ACPI support modules
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-2.6-20050305
Description: debian installation image
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 96
Maintainer: Mario Joussen <joussen@debian.org>
Version: 1.9.0-1
Depends: libc6 (>= 2.3.2.ds1-4)
Description: Manage MD devices aka Linux Software Raid
mdadm is a program that can be used to create, manage, and monitor MD
devices. As such it provides a similar set of functionality to the
raidtools packages.
.
Unlike raidtools, mdadm can perform (almost) all of its functions
without having a configuration file.
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 252
Maintainer: Paul Fleischer <proguy@proguy.dk>
Version: 1.10
Depends: cdebconf-udeb, md-modules, mdadm-udeb, partconf-find-partitions, parted-udeb
Description: Configure MD devices
Use this module to configure the MD devices.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1632
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.2.ds1-20
Depends: libnss-dns-udeb, libnss-files-udeb
Provides: libc6, libc-udeb, glibc-2.3.2.ds1-20
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libnss-files-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.2.ds1-20
Description: GNU C Library: NSS helper for files - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains the files NSS helper needed for the Debian installer.
Do not install it on a normal system.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 180
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.07.1
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils-mapdevfs, os-prober
Provides: bootable-system
Description: Install GRUB on a hard disk
installer-menu-item: 73
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 136
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.1
Depends: libc6 (>= 2.3.2.ds1-4)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: ethdetect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: cdebconf-udeb (>= 0.38), hw-detect
Provides: ethernet-card-detection
Description: Detect network hardware and load kernel drivers for it
installer-menu-item: 15
Package: hw-detect-full
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: cdebconf-udeb (>= 0.38), hw-detect
Provides: harddrive-detection
Description: Detect hardware and load kernel drivers for it (full version)
installer-menu-item: 35
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 124
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.2.45-0.2
Depends: libc6 (>= 2.3.2.ds1-4), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.08
Depends: libc6 (>= 2.3.2.ds1-4), libdebian-installer4 (>= 0.29)
Description: mapdevfs utility for the debian installer
Package: libdevmapper1.01-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 44
Maintainer: Patrick Caulfield <patrick@debian.org>
Version: 2:1.01.00-1
Depends: libc6 (>= 2.3.2.ds1-4)
Provides: libdevmapper1.01
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: e2fsprogs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 284
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.35-8
Depends: libblkid1-udeb, libc6 (>= 2.3.2.ds1-4)
Description: A stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 36
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.35-8
Depends: libc6 (>= 2.3.2.ds1-4)
Provides: libblkid1
Description: Block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libuuid1-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.35-8
Depends: libc6 (>= 2.3.2.ds1-4)
Provides: libuuid1
Description: Universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: libparted1.6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 304
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.6.21-1
Depends: libc6 (>= 2.3.2.ds1-4), libuuid1
Provides: libparted1.6-12
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.6.21-1
Depends: libc6 (>= 2.3.2.ds1-4), libparted1.6-12 (>= 1.6.0)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 80
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.01
Depends: configured-network, di-utils
Description: Download debconf preseed file
installer-menu-item: 21
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 12
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.07
Depends: libc6 (>= 2.3.2.ds1-4), libdebian-installer4 (>= 0.29), libparted1.6-12 (>= 1.6.0), libparted1.6-udeb
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: partman
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 704
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 63
Depends: libc6 (>= 2.3.2.ds1-4), libparted1.6-12 (>= 1.6.0), libparted1.6-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
installer-menu-item: 42
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 288
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 41
Depends: partman, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
This package adds to the main partitioning menu of partman an item
`Automatically partition the storage devices'. For each free space
it also adds an item `Automatically partition this free space'.
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 384
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 38
Depends: e2fsprogs-udeb, ext2-modules, fat-modules
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
In future this package will support also reiserfs.
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 26
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 176
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 36
Depends: e2fsprogs-udeb, ext3-modules, partman-basicfilesystems
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 204
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: lvmcfg-utils, lvm2-udeb, partman
Description: Add to partman support for LVM
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 120
Maintainer: Paul Fleischer <proguy@proguy.dk>
Version: 20
Depends: mdadm-udeb, mdcfg-utils, partman
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: ntfstools-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 180
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 25
Depends: reiserfsprogs-udeb, reiserfs-modules, partman-basicfilesystems
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 176
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 25
Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: prebaseconfig
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.07
Depends: base-installer, created-fstab, bootable-system
Description: Finish the installation and reboot
finish the installation and reboot
installer-menu-item: 78
Package: netcfg
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 444
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.08
Depends: libc6 (>= 2.3.2.ds1-4), libdebconfclient0, libdebian-installer4 (>= 0.29), libiw27 (>= 27), cdebconf-udeb, dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection, libiw27-udeb
Provides: configured-network
Description: Configure the network
To install additional installer components or the Debian Base System over
the network, you need to configure the network in the installer. This
component will first try to configure your network with DHCP and ask
you for static network configuration if this fails. The configured
network settings will be copied to your newly installed system.
installer-menu-item: 18
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.03
Depends: cdebconf-udeb, kernel-installer, parted-udeb, di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
installer-menu-item: 77
Package: os-prober
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.04
Depends: ext3-modules, reiserfs-modules, xfs-modules, fat-modules, ntfs-modules
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1448
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12-10
Description: Partition a hard drive (manual, cfdisk)
Cfdisk package
Package: ext3-modules-2.6.8-2-386-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.02
Depends: kernel-image-2.6.8-2-386-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: jfs-modules-2.6.8-2-386-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.02
Depends: kernel-image-2.6.8-2-386-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: loop-modules-2.6.8-2-386-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.02
Depends: kernel-image-2.6.8-2-386-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: md-modules-2.6.8-2-386-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 420
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.02
Depends: kernel-image-2.6.8-2-386-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: nic-extra-modules-2.6.8-2-386-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.02
Depends: kernel-image-2.6.8-2-386-di, nic-shared-modules-2.6.8-2-386-di, firmware-modules-2.6.8-2-386-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.8-2-386-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 384
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.02
Depends: kernel-image-2.6.8-2-386-di, nic-shared-modules-2.6.8-2-386-di, firmware-modules-2.6.8-2-386-di, firewire-core-modules-2.6.8-2-386-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.8-2-386-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 532
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.02
Depends: kernel-image-2.6.8-2-386-di, nic-shared-modules-2.6.8-2-386-di, nic-extra-modules-2.6.8-2-386-di, pcmcia-modules-2.6.8-2-386-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.8-2-386-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.02
Depends: kernel-image-2.6.8-2-386-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.8-2-386-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.02
Depends: kernel-image-2.6.8-2-386-di, nic-shared-modules-2.6.8-2-386-di, usb-modules-2.6.8-2-386-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: ntfs-modules-2.6.8-2-386-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.02
Depends: kernel-image-2.6.8-2-386-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: reiserfs-modules-2.6.8-2-386-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 264
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.02
Depends: kernel-image-2.6.8-2-386-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.8-2-386-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1084
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.02
Depends: scsi-modules-2.6.8-2-386-di, scsi-core-modules-2.6.8-2-386-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: xfs-modules-2.6.8-2-386-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 584
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.02
Depends: kernel-image-2.6.8-2-386-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.07
Depends: cdebconf-udeb, kernel-installer, di-utils-mapdevfs, fdisk-udeb, os-prober
Provides: bootable-system
Description: Install LILO on a hard disk
installer-menu-item: 75
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 492
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.01.04-2
Depends: libc6 (>= 2.3.2.ds1-4), libdevmapper1.01
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: lvmcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.06
Depends: cdebconf-udeb, md-modules, lvm2-udeb, parted-udeb
Description: lvmcfg without the main menu item
Package: ntfstools-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 124
Maintainer: David MartÃnez Moreno <ender@debian.org>
Version: 1.9.4-2
Depends: libc6 (>= 2.3.2.ds1-4)
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: xfsprogs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 280
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.6.20-1
Depends: libc6 (>= 2.3.2.ds1-4), libuuid1
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13.4
Depends: libc6 (>= 2.3.2.ds1-4), libdebconfclient0, libdebian-installer4 (>= 0.29), mounted-partitions, debootstrap-udeb, created-fstab, archdetect, di-utils-mapdevfs
Provides: kernel-installer
Description: Install the base system
This udeb is responsible for calling debootstrap and installing the
base system.
installer-menu-item: 65
Package: bugreporter-udeb
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 84
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.02
Description: Save logs and configuration to floppy for debug purposes
Make it possible to debug broken installation by saving the current
logs and configuration to floppy.
installer-menu-item: 940
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 148
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-1
Depends: libc6 (>= 2.3.2.ds1-4), libuuid1
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: libiw27-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 24
Maintainer: Guus Sliepen <guus@debian.org>
Version: 27-2
Provides: libiw27
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 27-2
Depends: libiw27-udeb (= 27-2)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1020
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.7-1
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
--- End Message ---