Bug#288034: marked as done (installation-reports)
Your message dated Wed, 08 Sep 2010 03:58:43 +0000
with message-id <E1OtBo3-0006Cj-OV@ravel.debian.org>
and subject line Closing old installation report #288034
has caused the Debian Bug report #288034,
regarding installation-reports
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)
--
288034: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=288034
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/daily/i386/current/sarge-i386-netinst.iso on 12/28/04
uname -a: Linux klamath 2.4.27-1-386 #1 Wed Dec 1 19:43:08 JST 2004 i686 GNU/Linux
Date: 12/30/04 23:00 pst
Method: netinst disk
Machine: HP DL360 G4
Processor: dual xeon 3g
Memory: 2GB
Root Device: scsi off of onboard raid1 (/dev/cciss/c0d0p1)
Root Size/partition table:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/cciss/c0d0p1 / ext3 defaults,errors=remount-ro 0 1
/dev/cciss/c0d0p5 /boot ext3 defaults 0 2
/dev/cciss/c0d0p6 /home ext3 defaults 0 2
/dev/cciss/c0d0p7 /tmp ext3 defaults 0 2
/dev/cciss/c0d0p8 /usr ext3 defaults 0 2
/dev/cciss/c0d0p10 /var ext3 defaults 0 2
/dev/cciss/c0d0p9 none swap sw 0 0
/dev/hda /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
Output of lspci and lspci -n:
klamath:/home/tyler# lspci
0000:00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub (rev 0a)
0000:00:02.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port A0 (rev 0a)
0000:00:04.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port B0 (rev 0a)
0000:00:06.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port C0 (rev 0a)
0000:00:1c.0 PCI bridge: Intel Corp. 6300ESB 64-bit PCI-X Bridge (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 6300ESB USB Universal Host Controller (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 6300ESB USB Universal Host Controller (rev 02)
0000:00:1d.4 System peripheral: Intel Corp. 6300ESB Watchdog Timer (rev 02)
0000:00:1d.5 PIC: Intel Corp. 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 6300ESB USB2 Enhanced Host Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 0a)
0000:00:1f.0 ISA bridge: Intel Corp. 6300ESB LPC Interface Controller (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 6300ESB PATA Storage Controller (rev 02)
0000:01:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 01)
0000:01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 01)
0000:02:01.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx (rev 01)
0000:02:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
0000:02:02.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
0000:06:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A (rev 09)
0000:06:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B (rev 09)
klamath:/home/tyler# lspci -n
0000:00:00.0 0600: 8086:3590 (rev 0a)
0000:00:02.0 0604: 8086:3595 (rev 0a)
0000:00:04.0 0604: 8086:3597 (rev 0a)
0000:00:06.0 0604: 8086:3599 (rev 0a)
0000:00:1c.0 0604: 8086:25ae (rev 02)
0000:00:1d.0 0c03: 8086:25a9 (rev 02)
0000:00:1d.1 0c03: 8086:25aa (rev 02)
0000:00:1d.4 0880: 8086:25ab (rev 02)
0000:00:1d.5 0800: 8086:25ac (rev 02)
0000:00:1d.7 0c03: 8086:25ad (rev 02)
0000:00:1e.0 0604: 8086:244e (rev 0a)
0000:00:1f.0 0601: 8086:25a1 (rev 02)
0000:00:1f.1 0101: 8086:25a2 (rev 02)
0000:01:03.0 0300: 1002:4752 (rev 27)
0000:01:04.0 0880: 0e11:b203 (rev 01)
0000:01:04.2 0880: 0e11:b204 (rev 01)
0000:02:01.0 0104: 0e11:0046 (rev 01)
0000:02:02.0 0200: 14e4:1648 (rev 10)
0000:02:02.1 0200: 14e4:1648 (rev 10)
0000:06:00.0 0604: 8086:0329 (rev 09)
0000:06:00.2 0604: 8086:032a (rev 09)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [0]
Configure network HW: [0]
Config network: [0]
Detect CD: [0]
Load installer modules: [0]
Detect hard drives: [0]
Partition hard drives: [0]
Create file systems: [0]
Mount partitions: [0]
Install base system: [0]
Install boot loader: [0]
Reboot: [E]
Comments/Problems:
First try was with 2.6.8 and it panicked on the reboot; last message was: 426: cannot open dev/console: no such file
I re-tried with 2.4.27 and it came up perfectly.
Great job. THANKS!!!
--
Tyler Johnson <tyler@greenmuseum.org>
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---
Reply to: