[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#262549: marked as done (installation-reports)



Your message dated Wed, 08 Sep 2010 03:58:42 +0000
with message-id <E1OtBo2-0006AM-J5@ravel.debian.org>
and subject line Closing old installation report #262549
has caused the Debian Bug report #262549,
regarding installation-reports
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
262549: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=262549
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---

Package: installation-reports

Debian-installer-version: beta4 from
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/beta4/sarge-i386-netinst.iso
uname -a: 2.6.5-1-386
Date: 07/31/04 14h about
Method:
I copy the iso on a disk and boot on it.
I have a LAN (= a gateway connected on the Internet and configured with firewall
off, ipforward on, no proxy)
Machine: no mark
Processor: AMD athlon 500Mhz (K7 on slot A)
Memory: 128Mo SDRAM
Root Device:
hard disk Western Digital caviar IDE
CD-R/RW Ricoh MP7040A IDE
Root Size/partition table:
my fstab :
proc       /proc         proc    default                   0 0
/dev/hda7  none          swap    sw                        0 0
/dev/hda5  /             ext3    defaults,errors=remountro 0 1
/dev/hda6  /home         ext3    defaults                  0 2
/dev/hdb   /media/cdrom  iso9660 ro,user,noauto            0 0
/dev/fd0   /media/floppy auto    rw,user, noauto           0 0
/dev/hdb   /cdrom        iso9660 ro,user,noauto            0 0

Output of lspci: with 2.4.25-1-386 kernel (see below)
0000:00:00.0 Host bridge: [AMD] AMD-751 [Irongate] System Controller (rev25)
0000:00:01.0 PCI bridge: [AMD] AMD-751 [Irongate] AGP bridge (rev01)
0000:00:07.0 ISA bridge: [AMD] AMD-751 [Viper] ISA (rev01)
0000:00:07.0 IDE interface: [AMD] AMD-751 [Viper] IDE (rev03)
0000:00:07.0 Bridge: [AMD] AMD-751 [Viper] ACPI (rev03)
0000:00:07.0 USB Controller: [AMD] AMD-751 [Viper] USB (rev06)
0000:00:0a.0 Ethernet Controller: Realtek RTL-8139/8139C/8139C+ (rev10)
0000:01:05.0 VGA compatible VGA: Intel i740 (rev21)

Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [E]
Install boot loader:    [E]
Reboot:                 [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:

During "Install base system" the installer tries to retrieve libgnutls10 but
failed. I notice also that some modules before were unvailable :
8139too (for my ethernet card Realtek RTL8139/810X)
ide-scsi

And in the saved log (syslog) I see other modules missing :
ide-mod
ide-probe-mod
ide-prob-mod
ide-detect
ide-floppy
ide-scsi

I also found in this log packages missing :
cdebconf-udeb
libc6
libdebconfclient0
hw-detect
kernel-image-2.6.5-1-386-di  !!??
reiserfsprogs-udeb
libiw27
scsi-core-modules-2.6.5-1-386-di
cdrom-core-modules-2.6.5-1-386-di

And the error code :
Configuring 'base-installer' failed with error code 30

I try then with the kernel 2.4.25-1-386 and all works well.

thanks.
Yannick Peyrusson


--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
  Installer.
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful


The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.



--- End Message ---

Reply to: