[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#242669: marked as done ([i386] [beta3] [netinst] (in portuguese) successful)

Your message dated Wed, 08 Sep 2010 03:58:34 +0000
with message-id <E1OtBnu-0005sW-Ly@ravel.debian.org>
and subject line Closing old installation report #242669
has caused the Debian Bug report #242669,
regarding [i386] [beta3] [netinst] (in portuguese) successful
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
242669: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=242669
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

INSTALL REPORT

Debian-installer-version: download
date: 04/04/2004
image:
http://gluck.debian.org/cdimage/testing/sarge_d-i/i386/beta3/sarge-i386-netinst.iso
uname -a: 2.4.25-1-386
Date: 04/04/2004 ~ 23:00:00
Method: How did you install?  CD-ROM
image - net: lan/adsl - no proxy

Machine: AMD
Processor: 1300
Memory: 256
Root Device: hda
Root Size/partition table:
 Name        Flags      Part Type  FS
Type          [Label]        Size (MB)
 ------------------------------------------------------------------------------
    hda1        Boot        Primary
NTFS             []              12584.68
    hda5                    Logical
NTFS             []              24083.62
    hda6                    Logical
Linux swap                         180.96
    hda3                    Primary
Linux ext3                        3183.19

Output of lspci:

00:00.0 Host bridge: Silicon
Integrated Systems [SiS] 735 Host (rev 01)
00:01.0 PCI bridge: Silicon Integrated
Systems [SiS] SiS 530 Virtual
PCI-to-PCI bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated
Systems [SiS] 85C503/5513
00:02.2 USB Controller: Silicon
Integrated Systems [SiS] USB 1.0
Controller (rev 07)
00:02.3 USB Controller: Silicon
Integrated Systems [SiS] USB 1.0
Controller (rev 07)
00:02.5 IDE interface: Silicon
Integrated Systems [SiS] 5513 [IDE]
(rev d0)
00:02.7 Multimedia audio controller:
Silicon Integrated Systems [SiS] Sound
Controller (rev a0)
00:03.0 Ethernet controller: Silicon
Integrated Systems [SiS] SiS900 10/100
Ethernet (rev 90)
00:0f.0 Communication controller:
Lucent Microelectronics: Unknown
device 048c (rev 02)
01:00.0 VGA compatible controller:
nVidia Corporation NV5M64 [RIVA TNT2
Model 64/Model 64 Pro] (rev 15)

Base System Installation Checklist:
[O] = OK, [E] = Error (please
elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O ]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:

Original Português-Brasil
Apesar dos itens acima estarem
marcados como bem sucedidos, em alguns
momentos da instalação, o instalador
não funcionou como deveria.

1) Uma vez que o módulo da placa de
rede não haver sido carregado, como
mostrou o lsmod em tty2, o módulo de
configuração de rede (netcfg) não foi
ativado automaticamente pelo debian
instaler, tendo que ser carregado
manualmente através da opção no menu
de carregar componentes do instalador.
2) Problemas no BASE-CONFIG.
a) Na instalação onde a rede não foi
configurada, depois do reinício do
sistema, o base-conf tenta fazer
download das atualizações de segurança
e em seguida mostra o aviso que não
foi possível fazer as atualizações e
quando clico em OK para continuar, o
sistema trava. Entro em tty2 e peço
lsmod e vejo que está carregado o
módulo da rede (sis900) porem quando
digito ifconfig, não é mostrada
nenhuma configuração de rede. Para dar
continuidade a instalação, tenho que
precionar Ctrl+C e teclar ENTER.
b) Em outra tentativa de instalação,
onde pedi para carregar o componente
para configurar a rede, ele se conecta
no site Debian e baixa as atualizações
de segurança. Após baixar as
atualizações, o sistema trava e só
continua a instalação quando preciono
Ctrl+C e ENTER. Após essa operação, as
mudanças entre os menus ficam demoradas.
3) No Woody, quando o APT busca
pacotes no CD, ele monta
automaticamente o CD. No sarge tenho
que digitar mount -t iso9660
/dev/cdrom /cdrom para ele poder
instalar pacotes do CD.
4) Não foi adicionada as entradas do
gravador de cdrw (/dev/hdc) e do dvd
(/dev/hdd) no /etc/fstab.

Translated to the English -
http://babelfish.altavista.com
Despite itens above being marked as
successful, at some moments of the
installation, the Debian Instaler did
not functioned as it would have.
1) Once the module of the net card was
not loaded, as it showed lsmod in
tty2, the component of net
configuration (netcfg) was not
activated automatically by the Debian
Instaler, having that to be loaded
manually through the option in the
menu to load components of the installer.
2) Problems in the BASE-CONFIG
a) In the installation where the net
was not configured, after the restart
of the system, the base-conf try to
download the security updates and
after that, shows the acknowledgment
that was not possible make the updates
and when click in OK to continue, the
system freeze. I enter in tty2 and I
ask for lsmod and see that he was
loaded the module of the net card
(sis900) however when I type ifconfig,
is not shown no configuration of net.
To give to continuity the
installation, I had to press Ctrl+C
and ENTER.
b) In another attempt of installation,
where I asked for to load the
component to configure the net card,
it connects in the site Debian and
download the security updates. After
download the updates, the system
freeze and only continues the
installation when I press Ctrl+C and
ENTER. After this operation, the
changes between the menus are delayed.
3) In the Woody, when the APT searchs
packages in the CD, it mounts the CD
automatically. In sarge I have to type
mount - t iso9660 /dev/cdrom /cdrom to
be able to install packages of the CD.
4) it was not added the entrances of
the cdrw (/dev/hdc) and the dvd
(/dev/hdd) in /etc/fstab.

Install logs and other status info is
available in /var/log/debian-installer/.
Once you have filled out this report,
mail it to submit@bugs.debian.org.


Obrigado,
Marcos Araujo


---
Acabe com aquelas janelinhas que pulam na sua tela.
AntiPop-up UOL - É grátis!
http://antipopup.uol.com.br

Attachment: hardware-summary
Description: Binary data

Attachment: messages
Description: Binary data

Attachment: package-versions
Description: Binary data

Attachment: partman
Description: Binary data

Attachment: syslog
Description: Binary data

Attachment: questions.dat
Description: Binary data


--- End Message ---
--- Begin Message --- 
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
  Installer.
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful


The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.

--- End Message ---
Reply to: