[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#498597: marked as done (installation-reports: [sparc][etchnhalf] Sunfire V880 netbooting kernels fail (lenny, etch, lenny daily))

Your message dated Wed, 08 Sep 2010 03:57:33 +0000
with message-id <E1OtBmv-0003nq-0m@ravel.debian.org>
and subject line Closing old installation report #498597
has caused the Debian Bug report #498597,
regarding installation-reports: [sparc][etchnhalf] Sunfire V880 netbooting kernels fail (lenny, etch, lenny daily)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
498597: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=498597
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports
Version: etchnhalf, lenny netboot image
Severity: important



-- Package-specific info:

Boot method: network 
Image version: lenny with 2.6.25 kernel
Date: 11.9.2008

Machine: SunFire V880
Partitions:
Filesystem    Type   1K-blocks      Used Available Use% Mounted on
/dev/sda1     ext2    33471260    389868  31381144   2% /
tmpfs        tmpfs     2074560         0   2074560   0% /lib/init/rw
udev         tmpfs       10240        64     10176   1% /dev
tmpfs        tmpfs     2074560         0   2074560   0% /dev/shm


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [E]
Detect network card:    [ ]
Configure network:      [O]
Detect CD:              [ ]
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [O]

Comments/Problems:

current lenny installers contain a 2.6.25 kernel for the sparc architecture which
will crash or run to unstable for the installer on this Machine. 
The installed 2.6.24-etchnhalf.1-sparc64-smp
kernel works, besides the nasty qla2xxx firmware stuff 
(see: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=464445).

I build a vanilla 2.6.26.5 kernel with a 
static network module (described in: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=495216), which
at the end allowed a successfull install. Hope the sparc kernel of the installer will be
stable when lenny will become stable.

Thanks for your work,
  greetings
    Hermann

-- 

Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.

Once you have filled out this report, mail it to submit@bugs.debian.org.

==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="5.0 (lenny) - installer build 20080522"
X_INSTALLATION_MEDIUM=netboot

==============================================
Installer hardware-summary:
==============================================
umame -a: Linux install1 2.6.26.5 #2 SMP Wed Sep 10 13:50:27 CEST 2008 sparc64 unknown
lspci -knn: 0000:00:01.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c875 [1000:000f] (rev 04)
lspci -knn: 	Kernel driver in use: sym53c8xx
lspci -knn: 0001:00:01.0 Ethernet controller [0200]: Sun Microsystems Computer Corp. GEM 10/100/1000 Ethernet [ge] [108e:2bad] (rev 01)
lspci -knn: 	Kernel driver in use: gem
lspci -knn: 0001:00:02.0 SCSI storage controller [0100]: QLogic Corp. QLA2200 64-bit Fibre Channel Adapter [1077:2200] (rev 05)
lspci -knn: 	Kernel driver in use: qla2xxx
lspci -knn: 0002:00:01.0 Bridge [0680]: Sun Microsystems Computer Corp. RIO EBUS [108e:1100] (rev 01)
lspci -knn: 0002:00:01.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. RIO 10/100 Ethernet [eri] [108e:1101] (rev 01)
lspci -knn: 	Kernel driver in use: gem
lspci -knn: 0002:00:01.3 USB Controller [0c03]: Sun Microsystems Computer Corp. RIO USB [108e:1103] (rev 01)
prtconf: System Configuration:  Sun Microsystems  sun4u
prtconf: Memory size: 4096 Megabytes
prtconf: System Peripherals (Software Nodes):
prtconf: 
prtconf: SUNW,Sun-Fire-880
prtconf:     packages (driver probably installed)
prtconf:         SUNW,builtin-drivers (driver probably installed)
prtconf:         deblocker (driver probably installed)
prtconf:         disk-label (driver probably installed)
prtconf:         terminal-emulator (driver probably installed)
prtconf:         SUNW,debug (driver probably installed)
prtconf:         dropins (driver probably installed)
prtconf:         kbd-translator (driver probably installed)
prtconf:         obp-tftp (driver probably installed)
prtconf:         SUNW,i2c-ram-device (driver probably installed)
prtconf:         SUNW,fru-device (driver probably installed)
prtconf:     chosen (driver probably installed)
prtconf:     openprom (driver probably installed)
prtconf:         client-services (driver probably installed)
prtconf:     options (driver probably installed)
prtconf:     aliases (driver probably installed)
prtconf:     memory (driver probably installed)
prtconf:     virtual-memory (driver probably installed)
prtconf:     SUNW,UltraSPARC-III (driver probably installed)
prtconf:     memory-controller (driver probably installed)
prtconf:     SUNW,UltraSPARC-III (driver probably installed)
prtconf:     memory-controller (driver probably installed)
prtconf:     pci (driver probably installed)
prtconf:         scsi (driver probably installed)
prtconf:             disk (driver probably installed)
prtconf:             tape (driver probably installed)
prtconf:     pci (driver probably installed)
prtconf:         network (driver probably installed)
prtconf:         SUNW,qlc (driver probably installed)
prtconf:             fp (driver probably installed)
prtconf:                 disk (driver probably installed)
prtconf:     pci (driver probably installed)
prtconf:         ebus (driver probably installed)
prtconf:             flashprom (driver probably installed)
prtconf:             bbc (driver probably installed)
prtconf:             power (driver probably installed)
prtconf:             i2c (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 temperature (driver probably installed)
prtconf:                 temperature (driver probably installed)
prtconf:                 temperature (driver probably installed)
prtconf:                 temperature (driver probably installed)
prtconf:                 temperature (driver probably installed)
prtconf:                 temperature (driver probably installed)
prtconf:                 temperature (driver probably installed)
prtconf:             i2c (driver probably installed)
prtconf:                 controller (driver probably installed)
prtconf:                 smbus-ara (driver probably installed)
prtconf:                 controller (driver probably installed)
prtconf:                 temperature (driver probably installed)
prtconf:                 temperature (driver probably installed)
prtconf:                 ioexp (driver probably installed)
prtconf:                 controller (driver probably installed)
prtconf:                 adio (driver probably installed)
prtconf:                 adio (driver probably installed)
prtconf:                 ioexp (driver probably installed)
prtconf:                 ioexp (driver probably installed)
prtconf:                 ioexp (driver probably installed)
prtconf:                 ioexp (driver probably installed)
prtconf:                 ioexp (driver probably installed)
prtconf:                 ioexp (driver probably installed)
prtconf:                 ioexp (driver probably installed)
prtconf:                 adio (driver probably installed)
prtconf:                 adio (driver probably installed)
prtconf:                 adio (driver probably installed)
prtconf:                 adio (driver probably installed)
prtconf:                 temperature-sensor (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 fru (driver probably installed)
prtconf:                 rscrtc (driver probably installed)
prtconf:                 hotplug-controller (driver probably installed)
prtconf:                 hotplug-controller (driver probably installed)
prtconf:                 hotplug-controller (driver probably installed)
prtconf:                 hotplug-controller (driver probably installed)
prtconf:             bbc (driver probably installed)
prtconf:             i2c (driver probably installed)
prtconf:                 temperature (driver probably installed)
prtconf:                 temperature (driver probably installed)
prtconf:                 temperature (driver probably installed)
prtconf:             i2c (driver probably installed)
prtconf:                 nvram (driver probably installed)
prtconf:                 idprom (driver probably installed)
prtconf:             rtc (driver probably installed)
prtconf:             gpio (driver probably installed)
prtconf:             pmc (driver probably installed)
prtconf:             rsc-control (driver probably installed)
prtconf:             rsc-console (driver probably installed)
prtconf:             serial (driver probably installed)
prtconf:         network (driver probably installed)
prtconf:         usb (driver probably installed)
prtconf:     pci (driver probably installed)
lsmod: Module                  Size  Used by
lsmod: qla2xxx               194408  2 
lsmod: firmware_class         10752  1 qla2xxx
df: Filesystem           1k-blocks      Used Available Use% Mounted on
df: tmpfs                  2074160        32   2074128   0% /dev
df: tmpfs                  2074160        32   2074128   0% /dev
df: /dev/sda1             33471260    276264  31494748   1% /target
df: /dev/sda1             33471260    276264  31494748   1% /dev/.static/dev
df: tmpfs                  2074160        32   2074128   0% /target/dev
free:               total         used         free       shared      buffers
free:   Mem:      4148320       441032      3707288            0        11264
free:  Swap:      1561488            0      1561488
free: Total:      5709808       441032      5268776
/proc/cpuinfo: cpu		: TI UltraSparc III (Cheetah)
/proc/cpuinfo: fpu		: UltraSparc III integrated FPU
/proc/cpuinfo: prom		: OBP 4.22.34 2007/07/23 13:01
/proc/cpuinfo: type		: sun4u
/proc/cpuinfo: ncpus probed	: 2
/proc/cpuinfo: ncpus active	: 2
/proc/cpuinfo: D$ parity tl1	: 0
/proc/cpuinfo: I$ parity tl1	: 0
/proc/cpuinfo: Cpu0ClkTck	: 000000002cb41780
/proc/cpuinfo: Cpu2ClkTck	: 000000002cb41780
/proc/cpuinfo: MMU Type	: Cheetah
/proc/cpuinfo: State:
/proc/cpuinfo: CPU0:		online
/proc/cpuinfo: CPU2:		online
/proc/ioports: 7ffe9000000-7ffe9ffffff : /pci@9,600000
/proc/ioports: 7ffeb000000-7ffebffffff : /pci@9,700000
/proc/ioports: 7ffed000000-7ffedffffff : /pci@8,600000
/proc/ioports:   7ffed000300-7ffed0003ff : qla2xxx
/proc/ioports: 7ffef000000-7ffefffffff : /pci@8,700000
/proc/ioports:   7ffef000300-7ffef0003ff : sym53c8xx
/proc/iomem: 7fb00000000-7fbffffffff : /pci@9,600000
/proc/iomem:   7fb000a0000-7fb000bffff : Video RAM area
/proc/iomem:   7fb000c0000-7fb000c7fff : Video ROM
/proc/iomem:   7fb000f0000-7fb000fffff : System ROM
/proc/iomem: 7fc00000000-7fcffffffff : /pci@9,700000
/proc/iomem:   7fc000a0000-7fc000bffff : Video RAM area
/proc/iomem:   7fc000c0000-7fc000c7fff : Video ROM
/proc/iomem:   7fc000f0000-7fc000fffff : System ROM
/proc/iomem:   7fc00100000-7fc0011ffff : sungem
/proc/iomem:   7fc7e30002e-7fc7e300031 : power
/proc/iomem:   7fc7e300070-7fc7e300071 : clock
/proc/iomem:   7fc7e400000-7fc7e40003f : sab
/proc/iomem:   7fc7e400040-7fc7e40007f : sab
/proc/iomem: 7fd00000000-7fdffffffff : /pci@8,600000
/proc/iomem:   7fd000a0000-7fd000bffff : Video RAM area
/proc/iomem:   7fd000c0000-7fd000c7fff : Video ROM
/proc/iomem:   7fd000f0000-7fd000fffff : System ROM
/proc/iomem:   7fd00200000-7fd003fffff : sungem
/proc/iomem:   7fd00400000-7fd00401fff : qla2xxx
/proc/iomem: 7fe00000000-7feffffffff : /pci@8,700000
/proc/iomem:   7fe000a0000-7fe000bffff : Video RAM area
/proc/iomem:   7fe000c0000-7fe000c7fff : Video ROM
/proc/iomem:   7fe000f0000-7fe000fffff : System ROM
/proc/iomem:   7fe00100000-7fe00101fff : sym53c8xx
/proc/iomem:   7fe00102000-7fe00103fff : sym53c8xx
/proc/interrupts:            CPU0       CPU2       
/proc/interrupts:   0:     409046     248987     <NULL>  timer
/proc/interrupts:   1:          0          0      sun4u  SCHIZO_PCIERR
/proc/interrupts:   2:          0          0      sun4u  SCHIZO_UE
/proc/interrupts:   3:          0          0      sun4u  SCHIZO_CE
/proc/interrupts:   4:          0          0      sun4u  SCHIZO_SERR
/proc/interrupts:   6:          0         41      sun4u  sym53c8xx
/proc/interrupts:   7:          0          0      sun4u  SCHIZO_PCIERR
/proc/interrupts:  10:      10440          0      sun4u  qla2xxx
/proc/interrupts:  11:          0          0      sun4u  SCHIZO_PCIERR
/proc/interrupts:  12:          0          0      sun4u  SCHIZO_UE
/proc/interrupts:  13:          0          0      sun4u  SCHIZO_CE
/proc/interrupts:  14:          0          0      sun4u  SCHIZO_SERR
/proc/interrupts:  21:      20313          0      sun4u  sab, sab
/proc/interrupts:  22:         12      65183      sun4u  eth0
/proc/interrupts:  24:          0          0      sun4u  SCHIZO_PCIERR
/proc/meminfo: MemTotal:      4148320 kB
/proc/meminfo: MemFree:       3707088 kB
/proc/meminfo: Buffers:         11264 kB
/proc/meminfo: Cached:         327856 kB
/proc/meminfo: SwapCached:          0 kB
/proc/meminfo: Active:         130184 kB
/proc/meminfo: Inactive:       214936 kB
/proc/meminfo: SwapTotal:     1561488 kB
/proc/meminfo: SwapFree:      1561488 kB
/proc/meminfo: Dirty:             456 kB
/proc/meminfo: Writeback:           0 kB
/proc/meminfo: AnonPages:        6040 kB
/proc/meminfo: Mapped:           2328 kB
/proc/meminfo: Slab:            31632 kB
/proc/meminfo: SReclaimable:    25696 kB
/proc/meminfo: SUnreclaim:       5936 kB
/proc/meminfo: PageTables:        264 kB
/proc/meminfo: NFS_Unstable:        0 kB
/proc/meminfo: Bounce:              0 kB
/proc/meminfo: WritebackTmp:        0 kB
/proc/meminfo: CommitLimit:   3635648 kB
/proc/meminfo: Committed_AS:    10560 kB
/proc/meminfo: VmallocTotal:  4194304 kB
/proc/meminfo: VmallocUsed:       752 kB
/proc/meminfo: VmallocChunk:  4193464 kB
/proc/meminfo: HugePages_Total:     0
/proc/meminfo: HugePages_Free:      0
/proc/meminfo: HugePages_Rsvd:      0
/proc/meminfo: HugePages_Surp:      0
/proc/meminfo: Hugepagesize:     4096 kB

==============================================
Installer status:
==============================================
Package: preseed-common
Status: install ok unpacked
Version: 1.36
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding

Package: udpkg
Status: install ok unpacked
Version: 1.06
Depends: libc6 (>= 2.5-5), libdebian-installer4-udeb (>= 0.51)
Description: tiny dpkg clone

Package: localechooser
Status: install ok installed
Version: 2.03
Depends: cdebconf-udeb (>= 0.129), iso-3166-udeb
Description: choose language/country/locale
Installer-Menu-Item: 1000

Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.7-10
Description: GNU C Library: NSS helper for DNS - udeb

Package: download-installer
Status: install ok installed
Version: 1.21
Depends: cdebconf-udeb, net-retriever, anna (>= 1.07)
Description: Download installer components
Installer-Menu-Item: 2300

Package: lowmemcheck
Status: install ok unpacked
Version: 1.29
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode

Package: main-menu
Status: install ok unpacked
Version: 1.27
Depends: libc6 (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.57), cdebconf-udeb
Description: Debian installer main menu

Package: di-utils-shell
Status: install ok installed
Version: 1.57
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 95000

Package: di-utils
Status: install ok installed
Version: 1.57
Depends: libc6 (>= 2.7-1), libdebian-installer4-udeb (>= 0.57), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer

Package: choose-mirror
Status: install ok installed
Version: 2.24
Depends: choose-mirror-bin, configured-network
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 2300

Package: network-preseed
Status: install ok unpacked
Version: 1.36
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 2100

Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.131
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.7-1), libnewt0.52, libslang2-udeb (>= 2.0.7-1)
Description: Newt frontend for Debian Configuration Management System

Package: dhcp3-client-udeb
Status: install ok installed
Version: 3.1.0-5
Depends: libc6 (>= 2.7-1)
Description: DHCP Client for debian-installer

Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.4-1
Depends: libc6 (>= 2.7-1)
Description: tools for managing Linux kernel modules

Package: gpgv-udeb
Status: install ok installed
Version: 1.4.6-2.2
Depends: libc6 (>= 2.7-1), zlib1g-udeb (>= 1:1.2.3.3.dfsg-1)
Description: minimal signature verification tool

Package: rootskel
Status: install ok installed
Version: 1.62
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer

Package: udev-udeb
Status: install ok unpacked
Version: 0.114-2
Depends: libc6 (>= 2.6-1)
Description: /dev/ and hotplug management daemon

Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.9-1
Depends: libc6 (>= 2.7-1)
Description: Free Implementation of the Unicode BiDi algorithm

Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-6
Depends: libc6 (>= 2.7-1)
Description: text-wrapping library with i18n - runtime udeb

Package: auto-install
Status: install ok unpacked
Version: 1.2
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 1900

Package: rescue-check
Status: install ok unpacked
Version: 1.15
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested

Package: cdebconf-udeb
Status: install ok installed
Version: 0.131
Provides: debconf-2.0
Depends: libc6 (>= 2.7-1), libdebian-installer4-udeb (>= 0.58), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)

Package: debian-archive-keyring-udeb
Status: install ok installed
Version: 2008.04.16+nmu1
Description: GnuPG keys of the Debian archive

Package: ai-choosers
Status: install ok unpacked
Version: 1.2
Depends: keyboard-setup, localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 2200

Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.131
Depends: cdebconf-udeb, libc6 (>= 2.7-1)
Description: Plain text frontend for Debian Configuration Management System

Package: iso-3166-udeb
Status: install ok installed
Version: 2.1-1
Description: provides iso_3166.tab file

Package: usb-modules-2.6.24-1-sparc64-di
Status: install ok unpacked
Version: 1.29
Provides: usb-modules
Depends: kernel-image-2.6.24-1-sparc64-di
Description: USB support

Package: ethdetect
Status: install ok installed
Version: 1.62
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 1700

Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.9.2-3
Depends: libc6 (>= 2.7-1)
Description: Tiny utilities for the debian-installer

Package: initrd-preseed
Status: install ok unpacked
Version: 1.36
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd

Package: net-retriever
Status: install ok installed
Version: 1.21
Provides: retriever
Depends: cdebconf-udeb, choose-mirror, configured-network, di-utils (>= 1.16), gpgv-udeb, debian-archive-keyring-udeb
Description: Fetch modules from the Internet

Package: libiw29-udeb
Status: install ok installed
Version: 29-1
Depends: libc6 (>= 2.6.1-1)
Description: Tools for manipulating Linux Wireless Extensions

Package: archdetect
Status: install ok installed
Version: 1.62
Depends: libc6 (>= 2.7-1), libdebian-installer4-udeb (>= 0.57)
Description: Hardware architecture detector

Package: save-logs
Status: install ok half-configured
Version: 2.35
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 94000

Package: di-utils-reboot
Status: install ok unpacked
Version: 1.57
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 99500

Package: anna
Status: install ok installed
Version: 1.32
Depends: libc6 (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.57), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do

Package: choose-mirror-bin
Status: install ok installed
Version: 2.24
Depends: cdebconf-udeb, libc6 (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.57)
Description: Choose mirror to install from (program)

Package: pciutils-udeb
Status: install ok unpacked
Version: 1:3.0.0-4
Depends: libc6 (>= 2.7-1), zlib1g-udeb (>= 1:1.2.3.3.dfsg-1)
Description: Linux PCI Utilities (udeb)

Package: console-keymaps-at
Status: install ok installed
Version: 2:1.07-3
Provides: console-keymaps
Depends: cdebconf-udeb
Description: keymaps for PC-style (PS/2 and AT) keyboards

Package: nic-modules-2.6.24-1-sparc64-di
Status: install ok unpacked
Version: 1.29
Provides: nic-modules
Depends: kernel-image-2.6.24-1-sparc64-di
Description: Network card modules for Sparc kernels

Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.57
Description: Terminfo entries needed by newt/slang in debian installer

Package: sparc-utils-udeb
Status: install ok unpacked
Version: 1.9-4
Depends: libc6 (>= 2.6.1-1)
Description: sparc-utils package for the Debian installer

Package: hw-detect
Status: install ok installed
Version: 1.62
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.48)
Description: Detect hardware and load kernel drivers for it

Package: kbd-chooser
Status: install ok installed
Version: 1.43
Provides: keyboard-setup
Depends: cdebconf-udeb, console-keymaps, libc6 (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.55)
Description: Detect a keyboard and select layout
Installer-Menu-Item: 1200

Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.58
Depends: libc6 (>= 2.7-1)
Description: Library of common debian-installer functions

Package: installation-locale
Status: install ok unpacked
Version: 1.2
Depends: rootskel
Description: UTF-8 C locale

Package: env-preseed
Status: install ok unpacked
Version: 1.36
Description: debconf preseeding via environment variables

Package: cdebconf-priority
Status: install ok unpacked
Version: 0.131
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 93000

Package: netcfg
Status: install ok installed
Version: 1.44
Provides: configured-network
Depends: libc6 (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.57), libiw29-udeb (>= 28+29pre7), dhcp3-client-udeb (>= 3.1.0-2), ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 1800

Package: zlib1g-udeb
Status: install ok installed
Version: 1:1.2.3.3.dfsg-12
Description: compression library - runtime for Debian installer

Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.131
Depends: libc6 (>= 2.7-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)

Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-2
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal

Package: kernel-image-2.6.24-1-sparc64-di
Status: install ok unpacked
Version: 1.29
Provides: ext2-modules, kernel-image
Description: Linux kernel binary image for the Debian installer

Package: debian-installer
Status: install ok installed
Version: netboot-20080522
Description: debian installation image

Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 176
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.38
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list

Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.38
Depends: apt-mirror-setup, installed-base, cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 7000

Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.91
Depends: cdebconf-udeb, di-utils-mapdevfs, di-utils (>= 1.48), rootskel (>= 1.19)
Description: base system installation framework

Package: bootstrap-base
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 520
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.91
Depends: libc6 (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.57), mounted-partitions, created-fstab, base-installer, debootstrap-udeb (>= 1.0.7), gpgv-udeb, debian-archive-keyring-udeb, archdetect
Provides: installed-base, kernel-installer
Description: Install the base system
Installer-Menu-Item: 6500

Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.95
Depends: cdebconf-udeb, configured-network, di-utils, localechooser, rdate-udeb (>= 1:1.1.2-5), tzsetup-udeb (>= 1:0.18)
Description: set up clock
Installer-Menu-Item: 2600

Package: debootstrap-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.0.10
Depends: mounted-partitions
Description: Bootstrap the Debian system

Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.57
Depends: libc6 (>= 2.7-1), libdebian-installer4-udeb (>= 0.57)
Description: mapdevfs utility for the debian installer

Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.62
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 3500

Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 516
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.41.0-3
Depends: libblkid1-udeb, libc6 (>= 2.7-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
 This package is an e2fsprogs package built for a reduced size, so that
 it can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway it should refuse to install.

Package: etch-support
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 84
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.03
Description: Adds backwards compatibility to the installer for installing Etch

Package: finish-install
Status: install ok half-configured
Priority: required
Section: debian-installer
Installed-Size: 116
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.18
Depends: cdebconf-udeb, archdetect, installed-base, created-fstab, bootable-system
Description: Finish the installation and reboot
Installer-Menu-Item: 7800

Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1100
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.12-2
Depends: libc6-udeb (>= 2.7-1), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
 This package is a jfsutils package built for reduced size, so that it
 can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway, it should fail to install.

Package: kickseed-common
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.48
Depends: di-utils (>= 1.20)
Description: Common files for Kickstart compatibility
 This package reads Kickstart files and preseeds an installation with them,
 translating to the d-i preseeding infrastructure.

Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.41.0-3
Depends: libc6 (>= 2.7-1)
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifiying
 filesystems by hard-coded device names, but via a logical naming
 system instead.
 .
 This is a minimal package for debian-installer.

Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 2700
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.7-13
Provides: glibc-2.7-1, libc-udeb, libc6
Description: GNU C Library: Shared libraries - udeb
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
 .
 This package contains a minimal set of libraries needed for the Debian
 installer.  Do not install it on a normal system.

Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 404
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package contains libparted, the required shared library
 used by Parted. This is a cut-down package with no normal
 documentation intended to be used in debian-installer.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
 PC98 disklabels/partition tables, as well as a 'loop' (raw
 disk) type which allows use on RAID/LVM. Filesystems which
 are currently fully supported are ext2, ext3, fat (FAT16
 and FAT32), ReiserFS (with libreiserfs) and linux-swap.
 Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
 UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
 but cannot create, resize or check these filesystems yet.
 .
 Note that ReiserFS support is only enabled if you install
 the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
 removed from sarge, ReiserFS support is not compiled in the
 default package.
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.

Package: libpcre3-udeb
Status: install ok installed
Priority: important
Section: debian-installer
Installed-Size: 184
Maintainer: Mark Baker <mark@mnb.org.uk>
Version: 7.6-2.1
Depends: libc6-udeb (>= 2.7-1)
Description: Perl 5 Compatible Regular Expression Library - runtime files (udeb)
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 This package contains the runtime libraries for the Debian Installer (udeb).

Package: libslang2-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 780
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Version: 2.1.3-3
Depends: libc-udeb
Description: S-Lang library for Debian Installer
 This is a udeb, or a microdeb, of the S-Lang library with wide charater
 support. As such it is the installer counterpart of libslang2.
 You only need this package to support applications needing S-Lang during
 the Debian installation process time and probably don't need to select it.

Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.41.0-3
Depends: libc6 (>= 2.7-1)
Description: universally unique id library
 libuuid generates and parses 128-bit universally unique id's (UUID's).
 See RFC 4122 for more information.
 .
 This is a minimal package for debian-installer.

Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 212
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.6.7-3.1
Depends: libc6-udeb (>= 2.7-1)
Description: tool to administer Linux MD arrays (software RAID)
 The mdadm utility can be used to create, manage, and monitor MD
 (multi-disk) arrays for software RAID or multipath I/O.
 .
 This is a minimal package used by the debian-installer.

Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 420
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.26
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
 Use this module to configure the MD devices.

Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 192
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-6
Depends: libc6 (>= 2.6-1), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
 This installer module contains the utility to create ReiserFS filesystems.
 .
  Homepage: http://www.namesys.com/

Package: nano-udeb
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Jordi Mallach <jordi@debian.org>
Version: 2.0.7-4
Depends: libc6-udeb (>= 2.7-1), libslang2-udeb (>= 2.0.7-1)
Provides: editor
Description: free Pico clone with some new features - tiny build
 GNU nano is a free replacement for Pico, the default Pine editor. Pine is
 copyrighted under a restrictive licence, that makes it unsuitable for
 Debian's main section. GNU nano is an effort to provide a Pico-like
 editor, but also includes some features that were missing in the original,
 such as 'search and replace', 'goto line' or internationalization support.
 .
 This package contains a minimal build of GNU nano, aimed for use in
 debian-installer. Thus, many features are disabled in this version.

Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: cdebconf-udeb, installed-base, di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
 This package will skip installing a boot-loader
Installer-Menu-Item: 7700

Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.26
Depends: libc6 (>= 2.7-1), libdebian-installer4-udeb (>= 0.57), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
 Helper program for finding partitions and detecting their size and
 existing file system.

Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 352
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 78
Depends: cdebconf-udeb, di-utils, partman-base (>= 114), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)

Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 11
Depends: cdebconf-udeb, partman-base (>= 114), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs

Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 804
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 120
Depends: libc6-udeb (>= 2.7-1), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-utils, partman-partitioning (>= 54), partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: created-fstab, made-filesystems, mounted-partitions, partitioned-harddrives
Description: Partition the storage devices (partman)
Installer-Menu-Item: 4200

Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 628
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 60
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32

Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 39
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
 This package provides partman with two methods to use partitions.
 The first is to format the partition.  The second is to keep and use
 the existing data in the partition as it is.

Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 52
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems (>= 59)
Provides: partman-filesystem
Description: Add to partman support for ext3

Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 244
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 27
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems (>= 59)
Provides: partman-filesystem
Description: Add support for jfs to partman

Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 41
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 114)
Description: Add to partman support for MD

Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 556
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 59
Depends: e2fsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
 This udeb provides partman with editing operations for creation
 of new partitions, deletion of partitions and initialisation of the
 partition table.

Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 42
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems (>= 59)
Provides: partman-filesystem
Description: Add to partman support for reiserfs

Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 352
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 55
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
 This udeb allows the user to choose how partitions should be used.

Package: partman-utils
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 24
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 120
Depends: libc6-udeb (>= 2.7-1), libparted1.7-udeb (>= 1.7.1-1)
Description: Utilities related to partitioning

Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 41
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems (>= 59)
Provides: partman-filesystem
Description: Add to partman support for xfs

Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 56
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.20
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.56)
Description: Select and install packages
Installer-Menu-Item: 7000

Package: rdate-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Version: 1:1.1.3-2
Depends: libc6-udeb (>= 2.7-1)
Description: sets the system's date from a remote host

Package: silo-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: archdetect, cdebconf-udeb, di-utils-mapdevfs, installed-base, partman-base (>= 114)
Provides: bootable-system
Description: install silo on a hard disk
 This udeb will install silo on the hard disk.
Installer-Menu-Item: 7300

Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.21
Depends: cdebconf-udeb, localechooser
Description: choose time zone

Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 372
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 6900

Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 264
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.9.8-1
Depends: libc6 (>= 2.7-1), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
 This package is an xfsprogs package built for reduced size, so that it
 can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway, it should fail to install.

Package: firmware-qlogic-di
Status: install ok installed
Priority: optional
Section: non-free/debian-installer
Installed-Size: 656
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Version: 0.9
Description: Binary firmware for QLogic QLA2XXX

Package: libdevmapper1.02.1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 112
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.27-3
Depends: libc6-udeb (>= 2.7-1)
Description: The Linux Kernel Device Mapper userspace library
 This is a udeb, or a microdeb, for the debian-installer.
 .
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.

Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 564
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.39-2
Depends: libc6-udeb (>= 2.7-1), libdevmapper1.02.1-udeb (>= 2:1.02.27)
Description: The Linux Logical Volume Manager
 This is a udeb, or a microdeb, for the debian-installer.
 .
 This is LVM2, the rewrite of The Linux Logical Volume Manager.  LVM
 supports enterprise level volume management of disk and disk subsystems
 by grouping arbitrary disks into volume groups. The total capacity of
 volume groups can be allocated to logical volumes, which are accessed as
 regular block devices.

Package: partman-auto-lvm
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 172
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 27
Depends: cdebconf-udeb, partman-base (>= 114), partman-auto (>= 74), partman-lvm (>= 58), di-utils (>= 1.15)
Description: Automatically partition storage devices using LVM

Package: partman-lvm
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 800
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 61
Depends: cdebconf-udeb, partman-base (>= 114), di-utils (>= 1.14), md-modules, lvm2-udeb
Description: Adds support for LVM to partman

Package: partman-auto-crypto
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 8
Depends: cdebconf-udeb, partman-auto (>= 73), partman-auto-lvm (>= 24), partman-crypto (>= 25), partman-base (>= 114)
Description: Automatically partition storage devices using crypto and LVM

Package: partman-crypto
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 884
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: partman-base (>= 114), libc6 (>= 2.7-1), cdebconf-udeb
Description: Add to partman support for block device encryption

Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 112
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.26
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
 This package is to be used by boot loader installers to detect other OSes
 available on a system, in a generic format, which it can then adapt to its
 own configuration format.


-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: sparc (sparc64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.24-etchnhalf.1-sparc64-smp
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

--- End Message ---
--- Begin Message --- 
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
  Installer.
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful


The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.

--- End Message ---
Reply to: