[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#416542: marked as done (installation-reports: LVM disk devices change on reboot)



Your message dated Wed, 08 Sep 2010 03:57:32 +0000
with message-id <E1OtBmu-0003ms-K0@ravel.debian.org>
and subject line Closing old installation report #416542
has caused the Debian Bug report #416542,
regarding installation-reports: LVM disk devices change on reboot
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
416542: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=416542
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Severity: important

*** Please type your report below this line ***

I installed Etch RC2 to a brand new HP 1U server with dual SATA drives. Basically I made one 
partition on each drive, put them together with RAID1 and made LVM physical volume there. 
After that I created some logical volumes and did many things (if I remember correctly, I 
might have deleted the physical volume and recreated it).

The end result was that after booting I got only to initramfs-shell. Reason for that was 
that during installation LVM logical volume device nodes had major 254 and after reboot they 
had major 253. That resulted in missing root. Fix was simple (once I found it), just give 
'root=fd00' to lilo when booting up and then running "lilo" to set the default right.

[Also during installation lilo complained about not being able to mount /target/boot because 
it was busy.]

On second computer I did similar setup, but there I ended up deleting "root" logical volume 
and creating it again after another volume so their order got mixed up. In installer lv0 
(root partition) had minor 0 but after booting it became 1. Fix was similar to one above, 
boot with 'root=fd01' and execute lilo after successfull start.

[At this stage I reread the RC2 errata once again and find that the top item (Disk devices 
may change on reboot) describes just this problem. However it speaks about "multiple disk 
controllers" and I only have one (well, LVM is kind-of disk controller)]

I would also appreciate release note about LVM and Xen... Since grub doesn't work 
when /boot is on LVM it is rather impossible to boot xen (since lilo can't boot xen and 
grub can't boot from LVM). Plain old seperate /boot partition is still the best way (until 
we get grub2).

-- Package-specific info:

Boot method: DVD
Image version: Offical Etch RC2 full DVD (build 2007-03-17)
Date: 2007-03-28

Machine: HP ProLiant DL320
Partitions: 
/proc/partitions
major minor  #blocks  name

   8     0   78150744 sda
   8     1   78148161 sda1
   8    16   78150744 sdb
   8    17   78148161 sdb1
   9     0   78148096 md0
 253     0     262144 dm-0	# /boot
 253     1   31457280 dm-1	# /
 253     2    2097152 dm-2	# swap
 253     3   44331008 dm-3	# /var



Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [E]
Overall install:        [E]

Comments/Problems:

See above.

-- 

Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.

Once you have filled out this report, mail it to submit@bugs.debian.org.

==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070308)"
X_INSTALLATION_MEDIUM=cdrom

==============================================
Installer hardware-summary:
==============================================
umame -a: Linux tesla.vilant.com 2.6.18-4-486 #1 Wed Feb 21 15:25:16 UTC 2007 i686 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation E7230 Memory Controller Hub [8086:2778] (rev c0)
lspci -nn: 00:01.0 PCI bridge [0604]: Intel Corporation E7230 PCI Express Root Port [8086:2779] (rev c0)
lspci -nn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01)
lspci -nn: 00:1c.4 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 [8086:27e0] (rev 01)
lspci -nn: 00:1c.5 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 [8086:27e2] (rev 01)
lspci -nn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 01)
lspci -nn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 01)
lspci -nn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 01)
lspci -nn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 [8086:27cb] (rev 01)
lspci -nn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01)
lspci -nn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
lspci -nn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
lspci -nn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01)
lspci -nn: 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE [8086:27c0] (rev 01)
lspci -nn: 01:03.0 VGA compatible controller [0300]: ATI Technologies Inc ES1000 [1002:515e] (rev 02)
lspci -nn: 01:04.0 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Controller [0e11:b203] (rev 03)
lspci -nn: 01:04.2 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out  Processor [0e11:b204] (rev 03)
lspci -nn: 01:04.4 USB Controller [0c03]: Hewlett-Packard Company Unknown device [103c:3300]
lspci -nn: 01:04.6 Serial bus controller [0c07]: Hewlett-Packard Company Unknown device [103c:3302]
lspci -nn: 02:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev b5)
lspci -nn: 03:04.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5714 Gigabit Ethernet [14e4:1668] (rev a3)
lspci -nn: 03:04.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5714 Gigabit Ethernet [14e4:1668] (rev a3)
lspci -nn: 03:08.0 PCI bridge [0604]: Broadcom HT1000 PCI/PCI-X bridge [1166:0104] (rev b4)
lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation E7230 Memory Controller Hub [8086:2778] (rev c0)
lspci -vnn: 	Subsystem: Hewlett-Packard Company Unknown device [103c:31f9]
lspci -vnn: 	Flags: bus master, fast devsel, latency 0
lspci -vnn: 	Capabilities: [e0] Vendor Specific Information
lspci -vnn: 
lspci -vnn: 00:01.0 PCI bridge [0604]: Intel Corporation E7230 PCI Express Root Port [8086:2779] (rev c0)
lspci -vnn: 	Flags: bus master, fast devsel, latency 0
lspci -vnn: 	Bus: primary=00, secondary=0a, subordinate=0c, sec-latency=0
lspci -vnn: 	Capabilities: [88] Subsystem: Intel Corporation Unknown device [8086:0000]
lspci -vnn: 	Capabilities: [80] Power Management version 2
lspci -vnn: 	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: 	Capabilities: [a0] Express Root Port (Slot+) IRQ 0
lspci -vnn: 
lspci -vnn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01)
lspci -vnn: 	Flags: bus master, fast devsel, latency 0
lspci -vnn: 	Bus: primary=00, secondary=02, subordinate=06, sec-latency=0
lspci -vnn: 	Memory behind bridge: fdf00000-fdffffff
lspci -vnn: 	Capabilities: [40] Express Root Port (Slot-) IRQ 0
lspci -vnn: 	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: 	Capabilities: [90] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn: 	Capabilities: [a0] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:1c.4 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 [8086:27e0] (rev 01)
lspci -vnn: 	Flags: bus master, fast devsel, latency 0
lspci -vnn: 	Bus: primary=00, secondary=07, subordinate=09, sec-latency=0
lspci -vnn: 	Capabilities: [40] Express Root Port (Slot-) IRQ 0
lspci -vnn: 	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: 	Capabilities: [90] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn: 	Capabilities: [a0] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:1c.5 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 [8086:27e2] (rev 01)
lspci -vnn: 	Flags: bus master, fast devsel, latency 0
lspci -vnn: 	Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
lspci -vnn: 	Capabilities: [40] Express Root Port (Slot-) IRQ 0
lspci -vnn: 	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: 	Capabilities: [90] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn: 	Capabilities: [a0] Power Management version 2
lspci -vnn: 
lspci -vnn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 01)
lspci -vnn: 	Subsystem: Hewlett-Packard Company Unknown device [103c:31fe]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 217
lspci -vnn: 	I/O ports at 1000 [size=32]
lspci -vnn: 
lspci -vnn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 01)
lspci -vnn: 	Subsystem: Hewlett-Packard Company Unknown device [103c:31fe]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 217
lspci -vnn: 	I/O ports at 1020 [size=32]
lspci -vnn: 
lspci -vnn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 01)
lspci -vnn: 	Subsystem: Hewlett-Packard Company Unknown device [103c:31fe]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 217
lspci -vnn: 	I/O ports at 1040 [size=32]
lspci -vnn: 
lspci -vnn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 [8086:27cb] (rev 01)
lspci -vnn: 	Subsystem: Hewlett-Packard Company Unknown device [103c:31fe]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 217
lspci -vnn: 	I/O ports at 1060 [size=32]
lspci -vnn: 
lspci -vnn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20)
lspci -vnn: 	Subsystem: Hewlett-Packard Company Unknown device [103c:31fe]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 217
lspci -vnn: 	Memory at fdcf0000 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: 	Capabilities: [50] Power Management version 2
lspci -vnn: 	Capabilities: [58] Debug port
lspci -vnn: 
lspci -vnn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01)
lspci -vnn: 	Flags: bus master, fast devsel, latency 0
lspci -vnn: 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
lspci -vnn: 	I/O behind bridge: 00002000-00003fff
lspci -vnn: 	Memory behind bridge: fdd00000-fdefffff
lspci -vnn: 	Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff
lspci -vnn: 	Capabilities: [50] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn: 
lspci -vnn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
lspci -vnn: 	Flags: bus master, medium devsel, latency 0
lspci -vnn: 	Capabilities: [e0] Vendor Specific Information
lspci -vnn: 
lspci -vnn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
lspci -vnn: 	Subsystem: Hewlett-Packard Company Unknown device [103c:31fe]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0
lspci -vnn: 	I/O ports at <ignored>
lspci -vnn: 	I/O ports at <ignored>
lspci -vnn: 	I/O ports at <ignored>
lspci -vnn: 	I/O ports at <ignored>
lspci -vnn: 	I/O ports at 0500 [size=16]
lspci -vnn: 
lspci -vnn: 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
lspci -vnn: 	Subsystem: Hewlett-Packard Company Unknown device [103c:31fe]
lspci -vnn: 	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 233
lspci -vnn: 	I/O ports at 1080 [size=8]
lspci -vnn: 	I/O ports at 1088 [size=4]
lspci -vnn: 	I/O ports at 1090 [size=8]
lspci -vnn: 	I/O ports at 1098 [size=4]
lspci -vnn: 	I/O ports at 10a0 [size=16]
lspci -vnn: 	Memory at fdce0000 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: 	Capabilities: [70] Power Management version 2
lspci -vnn: 
lspci -vnn: 01:03.0 VGA compatible controller [0300]: ATI Technologies Inc ES1000 [1002:515e] (rev 02)
lspci -vnn: 	Subsystem: Hewlett-Packard Company Unknown device [103c:31fb]
lspci -vnn: 	Flags: bus master, stepping, medium devsel, latency 64, IRQ 5
lspci -vnn: 	Memory at d8000000 (32-bit, prefetchable) [size=128M]
lspci -vnn: 	I/O ports at 3000 [size=256]
lspci -vnn: 	Memory at fdef0000 (32-bit, non-prefetchable) [size=64K]
lspci -vnn: 	[virtual] Expansion ROM at fdd00000 [disabled] [size=128K]
lspci -vnn: 	Capabilities: [50] Power Management version 2
lspci -vnn: 
lspci -vnn: 01:04.0 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Controller [0e11:b203] (rev 03)
lspci -vnn: 	Subsystem: Hewlett-Packard Company Unknown device [103c:3305]
lspci -vnn: 	Flags: medium devsel, IRQ 10
lspci -vnn: 	I/O ports at 2800 [size=256]
lspci -vnn: 	Memory at fdee0000 (32-bit, non-prefetchable) [size=512]
lspci -vnn: 	Capabilities: [f0] Power Management version 3
lspci -vnn: 
lspci -vnn: 01:04.2 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out  Processor [0e11:b204] (rev 03)
lspci -vnn: 	Subsystem: Hewlett-Packard Company Unknown device [103c:3305]
lspci -vnn: 	Flags: bus master, medium devsel, latency 64, IRQ 11
lspci -vnn: 	I/O ports at 3400 [size=256]
lspci -vnn: 	Memory at fded0000 (32-bit, non-prefetchable) [size=2K]
lspci -vnn: 	Memory at fdec0000 (32-bit, non-prefetchable) [size=8K]
lspci -vnn: 	Memory at fde00000 (32-bit, non-prefetchable) [size=512K]
lspci -vnn: 	[virtual] Expansion ROM at fdd20000 [disabled] [size=64K]
lspci -vnn: 	Capabilities: [f0] Power Management version 3
lspci -vnn: 
lspci -vnn: 01:04.4 USB Controller [0c03]: Hewlett-Packard Company Unknown device [103c:3300]
lspci -vnn: 	Subsystem: Hewlett-Packard Company Unknown device [103c:3305]
lspci -vnn: 	Flags: bus master, medium devsel, latency 64, IRQ 225
lspci -vnn: 	I/O ports at 3800 [size=32]
lspci -vnn: 	Capabilities: [f0] Power Management version 3
lspci -vnn: 
lspci -vnn: 01:04.6 Serial bus controller [0c07]: Hewlett-Packard Company Unknown device [103c:3302] (prog-if 01)
lspci -vnn: 	Subsystem: Hewlett-Packard Company Unknown device [103c:3305]
lspci -vnn: 	Flags: medium devsel, IRQ 10
lspci -vnn: 	Memory at fddf0000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: 	Capabilities: [f0] Power Management version 3
lspci -vnn: 
lspci -vnn: 02:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev b5)
lspci -vnn: 	Flags: bus master, fast devsel, latency 0
lspci -vnn: 	Bus: primary=02, secondary=03, subordinate=06, sec-latency=64
lspci -vnn: 	Memory behind bridge: fdf00000-fdffffff
lspci -vnn: 	Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0
lspci -vnn: 	Capabilities: [90] PCI-X bridge device
lspci -vnn: 	Capabilities: [b0] Power Management version 2
lspci -vnn: 
lspci -vnn: 03:04.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5714 Gigabit Ethernet [14e4:1668] (rev a3)
lspci -vnn: 	Subsystem: Hewlett-Packard Company Unknown device [103c:7039]
lspci -vnn: 	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 58
lspci -vnn: 	Memory at fdff0000 (64-bit, non-prefetchable) [size=64K]
lspci -vnn: 	Memory at fdfe0000 (64-bit, non-prefetchable) [size=64K]
lspci -vnn: 	Capabilities: [40] PCI-X non-bridge device
lspci -vnn: 	Capabilities: [48] Power Management version 2
lspci -vnn: 	Capabilities: [50] Vital Product Data
lspci -vnn: 	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+
lspci -vnn: 
lspci -vnn: 03:04.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5714 Gigabit Ethernet [14e4:1668] (rev a3)
lspci -vnn: 	Subsystem: Hewlett-Packard Company Unknown device [103c:7039]
lspci -vnn: 	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 50
lspci -vnn: 	Memory at fdfd0000 (64-bit, non-prefetchable) [size=64K]
lspci -vnn: 	Memory at fdfc0000 (64-bit, non-prefetchable) [size=64K]
lspci -vnn: 	Capabilities: [40] PCI-X non-bridge device
lspci -vnn: 	Capabilities: [48] Power Management version 2
lspci -vnn: 	Capabilities: [50] Vital Product Data
lspci -vnn: 	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
lspci -vnn: 
lspci -vnn: 03:08.0 PCI bridge [0604]: Broadcom HT1000 PCI/PCI-X bridge [1166:0104] (rev b4)
lspci -vnn: 	Flags: bus master, 66MHz, medium devsel, latency 64
lspci -vnn: 	Bus: primary=03, secondary=04, subordinate=06, sec-latency=64
lspci -vnn: 	Capabilities: [90] PCI-X bridge device
lspci -vnn: 
modulemap: 8086:27c8 uhci_hcd
modulemap: 8086:27c9 uhci_hcd
modulemap: 8086:27ca uhci_hcd
modulemap: 8086:27cb uhci_hcd
modulemap: 8086:27cc ehci_hcd
modulemap: 8086:27df piix
modulemap: 8086:27c0 ata_piix
modulemap: 103c:3300 uhci_hcd
modulemap: 14e4:1668 tg3
modulemap: 14e4:1668 tg3
lsmod: Module                  Size  Used by
lsmod: qnx4                   10612  0 
lsmod: ntfs                  184084  0 
lsmod: raid456               113168  0 
lsmod: xor                    14344  1 raid456
lsmod: raid1                  19968  1 
lsmod: raid0                   7808  0 
lsmod: md_mod                 67860  4 raid456,raid1,raid0
lsmod: dm_mod                 48952  9 
lsmod: xfs                   464756  0 
lsmod: reiserfs              210432  0 
lsmod: jfs                   156380  0 
lsmod: ext3                  116488  3 
lsmod: jbd                    47272  1 ext3
lsmod: vfat                   11392  0 
lsmod: fat                    45596  1 vfat
lsmod: tg3                    93572  0 
lsmod: nls_iso8859_1           4096  0 
lsmod: rsrc_nonstatic         11648  0 
lsmod: pcmcia_core            35856  1 rsrc_nonstatic
lsmod: isofs                  31544  0 
lsmod: ide_cd                 35360  0 
lsmod: ide_disk               14720  0 
lsmod: ide_generic             1280  0 [permanent]
lsmod: pdc202xx_new            7808  0 [permanent]
lsmod: aec62xx                 6656  0 [permanent]
lsmod: alim15x3               11020  0 [permanent]
lsmod: amd74xx                12956  0 [permanent]
lsmod: atiixp                  5776  0 [permanent]
lsmod: cmd64x                  9884  0 [permanent]
lsmod: cs5520                  4608  0 [permanent]
lsmod: cs5530                  4864  0 [permanent]
lsmod: cs5535                  4224  0 [permanent]
lsmod: cy82c693                4356  0 [permanent]
lsmod: hpt34x                  4992  0 [permanent]
lsmod: it821x                  7684  0 [permanent]
lsmod: jmicron                 4096  0 [permanent]
lsmod: ns87415                 4168  0 [permanent]
lsmod: opti621                 3972  0 [permanent]
lsmod: pdc202xx_old            9344  0 [permanent]
lsmod: rz1000                  2688  0 [permanent]
lsmod: sc1200                  6528  0 [permanent]
lsmod: serverworks             8328  0 [permanent]
lsmod: siimage                10880  0 [permanent]
lsmod: sis5513                12296  0 [permanent]
lsmod: slc90e66                4992  0 [permanent]
lsmod: triflex                 3712  0 [permanent]
lsmod: trm290                  3972  0 [permanent]
lsmod: via82cxxx               8324  0 [permanent]
lsmod: sg                     30108  0 
lsmod: sr_mod                 15652  0 
lsmod: cdrom                  32160  2 ide_cd,sr_mod
lsmod: vga16fb                11148  2 
lsmod: vgastate                7680  1 vga16fb
lsmod: usbserial              28136  0 
lsmod: usbkbd                  6656  0 
lsmod: thermal                13320  0 
lsmod: processor              23212  1 thermal
lsmod: fan                     4740  0 
lsmod: sd_mod                 18832  4 
lsmod: usb_storage            70848  0 
lsmod: generic                 5380  0 [permanent]
lsmod: usbhid                 35552  0 
lsmod: ata_piix               13320  2 
lsmod: libata                 87316  1 ata_piix
lsmod: scsi_mod              121352  5 sg,sr_mod,sd_mod,usb_storage,libata
lsmod: piix                    9092  0 [permanent]
lsmod: ide_core              107248  31 ide_cd,ide_disk,ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,jmicron,ns87415,opti621,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,generic,piix
lsmod: ehci_hcd               26888  0 
lsmod: uhci_hcd               19980  0 
lsmod: usbcore               108676  7 usbserial,usbkbd,usb_storage,usbhid,ehci_hcd,uhci_hcd
df: Filesystem           1k-blocks      Used Available Use% Mounted on
df: tmpfs                   453396       424    452972   0% /dev
df: tmpfs                   453396       424    452972   0% /dev
df: tmpfs                   453396       424    452972   0% /.dev
df: /dev/mapper/vg0-lv1   30963708    511636  28879208   2% /target
df: /dev/mapper/vg0-lv3   43635188    246360  41172280   1% /target/var
df: /dev/mapper/vg0-lv0     253871     18014    222750   7% /target/boot
free:               total         used         free       shared      buffers
free:   Mem:       906792       529732       377060            0        30600
free:  Swap:      2097144            0      2097144
free: Total:      3003936       529732      2474204
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor	: 0
/proc/cpuinfo: vendor_id	: GenuineIntel
/proc/cpuinfo: cpu family	: 6
/proc/cpuinfo: model		: 15
/proc/cpuinfo: model name	: Intel(R) Xeon(R) CPU            3050  @ 2.13GHz
/proc/cpuinfo: stepping	: 2
/proc/cpuinfo: cpu MHz		: 2133.455
/proc/cpuinfo: cache size	: 2048 KB
/proc/cpuinfo: fdiv_bug	: no
/proc/cpuinfo: hlt_bug		: no
/proc/cpuinfo: f00f_bug	: no
/proc/cpuinfo: coma_bug	: no
/proc/cpuinfo: fpu		: yes
/proc/cpuinfo: fpu_exception	: yes
/proc/cpuinfo: cpuid level	: 10
/proc/cpuinfo: wp		: yes
/proc/cpuinfo: flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
/proc/cpuinfo: bogomips	: 4269.87
/proc/cpuinfo: 
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 02f8-02ff : serial
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0408-040f : pnp 00:01
/proc/ioports: 04d0-04d1 : pnp 00:01
/proc/ioports: 0500-050f : 0000:00:1f.1
/proc/ioports:   0500-0507 : ide0
/proc/ioports:   0508-050f : ide1
/proc/ioports: 0900-0903 : ACPI PM1a_EVT_BLK
/proc/ioports: 0904-0907 : ACPI PM1a_CNT_BLK
/proc/ioports: 0908-090b : ACPI PM_TMR
/proc/ioports: 0928-092f : ACPI GPE0_BLK
/proc/ioports: 0c80-0c83 : EISA device CPQ0774
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 1000-101f : 0000:00:1d.0
/proc/ioports:   1000-101f : uhci_hcd
/proc/ioports: 1020-103f : 0000:00:1d.1
/proc/ioports:   1020-103f : uhci_hcd
/proc/ioports: 1040-105f : 0000:00:1d.2
/proc/ioports:   1040-105f : uhci_hcd
/proc/ioports: 1060-107f : 0000:00:1d.3
/proc/ioports:   1060-107f : uhci_hcd
/proc/ioports: 1080-1087 : 0000:00:1f.2
/proc/ioports:   1080-1087 : libata
/proc/ioports: 1088-108b : 0000:00:1f.2
/proc/ioports:   1088-108b : libata
/proc/ioports: 1090-1097 : 0000:00:1f.2
/proc/ioports:   1090-1097 : libata
/proc/ioports: 1098-109b : 0000:00:1f.2
/proc/ioports:   1098-109b : libata
/proc/ioports: 10a0-10af : 0000:00:1f.2
/proc/ioports:   10a0-10af : libata
/proc/ioports: 2000-3fff : PCI Bus #01
/proc/ioports:   2800-28ff : 0000:01:04.0
/proc/ioports:   3000-30ff : 0000:01:03.0
/proc/ioports:   3400-34ff : 0000:01:04.2
/proc/ioports:   3800-381f : 0000:01:04.4
/proc/ioports:     3800-381f : uhci_hcd
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem:   00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000cafff : Video ROM
/proc/iomem: 000cf800-000d11ff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-3ffd7fff : System RAM
/proc/iomem:   00100000-00277829 : Kernel code
/proc/iomem:   0027782a-0030dc73 : Kernel data
/proc/iomem: 3ffd8000-3ffdffff : ACPI Tables
/proc/iomem: 3ffe0000-3fffffff : reserved
/proc/iomem: d8000000-dfffffff : PCI Bus #01
/proc/iomem:   d8000000-dfffffff : 0000:01:03.0
/proc/iomem: fdce0000-fdce03ff : 0000:00:1f.2
/proc/iomem:   fdce0000-fdce03ff : libata
/proc/iomem: fdcf0000-fdcf03ff : 0000:00:1d.7
/proc/iomem:   fdcf0000-fdcf03ff : ehci_hcd
/proc/iomem: fdd00000-fdefffff : PCI Bus #01
/proc/iomem:   fdd00000-fdd1ffff : 0000:01:03.0
/proc/iomem:   fdd20000-fdd2ffff : 0000:01:04.2
/proc/iomem:   fddf0000-fddf00ff : 0000:01:04.6
/proc/iomem:   fde00000-fde7ffff : 0000:01:04.2
/proc/iomem:   fdec0000-fdec1fff : 0000:01:04.2
/proc/iomem:   fded0000-fded07ff : 0000:01:04.2
/proc/iomem:   fdee0000-fdee01ff : 0000:01:04.0
/proc/iomem:   fdef0000-fdefffff : 0000:01:03.0
/proc/iomem: fdf00000-fdffffff : PCI Bus #02
/proc/iomem:   fdf00000-fdffffff : PCI Bus #03
/proc/iomem:     fdfc0000-fdfcffff : 0000:03:04.1
/proc/iomem:       fdfc0000-fdfcffff : tg3
/proc/iomem:     fdfd0000-fdfdffff : 0000:03:04.1
/proc/iomem:       fdfd0000-fdfdffff : tg3
/proc/iomem:     fdfe0000-fdfeffff : 0000:03:04.0
/proc/iomem:       fdfe0000-fdfeffff : tg3
/proc/iomem:     fdff0000-fdffffff : 0000:03:04.0
/proc/iomem:       fdff0000-fdffffff : tg3
/proc/iomem: fec00000-fecfffff : reserved
/proc/iomem: fee00000-fee0ffff : reserved
/proc/iomem: ffc00000-ffffffff : reserved
/proc/interrupts:            CPU0       
/proc/interrupts:   0:     657983    IO-APIC-edge  timer
/proc/interrupts:   1:       6043    IO-APIC-edge  i8042
/proc/interrupts:   9:          0   IO-APIC-level  acpi
/proc/interrupts:  58:       1126         PCI-MSI  eth0
/proc/interrupts: 217:      33651   IO-APIC-level  uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, ehci_hcd:usb6
/proc/interrupts: 225:        100   IO-APIC-level  uhci_hcd:usb5
/proc/interrupts: 233:     474342   IO-APIC-level  libata
/proc/interrupts: NMI:          0 
/proc/interrupts: LOC:     657268 
/proc/interrupts: ERR:          0
/proc/interrupts: MIS:          0
/proc/meminfo: MemTotal:       906792 kB
/proc/meminfo: MemFree:        376996 kB
/proc/meminfo: Buffers:         30600 kB
/proc/meminfo: Cached:         424864 kB
/proc/meminfo: SwapCached:          0 kB
/proc/meminfo: Active:         255748 kB
/proc/meminfo: Inactive:       220188 kB
/proc/meminfo: HighTotal:           0 kB
/proc/meminfo: HighFree:            0 kB
/proc/meminfo: LowTotal:       906792 kB
/proc/meminfo: LowFree:        376996 kB
/proc/meminfo: SwapTotal:     2097144 kB
/proc/meminfo: SwapFree:      2097144 kB
/proc/meminfo: Dirty:            1636 kB
/proc/meminfo: Writeback:           0 kB
/proc/meminfo: AnonPages:       17416 kB
/proc/meminfo: Mapped:           3076 kB
/proc/meminfo: Slab:            39760 kB
/proc/meminfo: PageTables:        240 kB
/proc/meminfo: NFS_Unstable:        0 kB
/proc/meminfo: Bounce:              0 kB
/proc/meminfo: CommitLimit:   2550540 kB
/proc/meminfo: Committed_AS:    21384 kB
/proc/meminfo: VmallocTotal:   122576 kB
/proc/meminfo: VmallocUsed:      8676 kB
/proc/meminfo: VmallocChunk:   113136 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd 
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 feffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices: 
/proc/bus/input/devices: I: Bus=0003 Vendor=03f0 Product=1027 Version=0001
/proc/bus/input/devices: N: Name="HP Virtual Keyboard"
/proc/bus/input/devices: P: Phys=usb-0000:01:04.4-1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=kbd 
/proc/bus/input/devices: B: EV=120003
/proc/bus/input/devices: B: KEY=e080ffdf 1cfffff ffffffff fffffffe
/proc/bus/input/devices: B: LED=1f
/proc/bus/input/devices: 
/proc/bus/input/devices: I: Bus=0003 Vendor=03f0 Product=1027 Version=0001
/proc/bus/input/devices: N: Name="HP Virtual Keyboard"
/proc/bus/input/devices: P: Phys=usb-0000:01:04.4-1/input1
/proc/bus/input/devices: S: Sysfs=/class/input/input2
/proc/bus/input/devices: H: Handlers=mouse0 
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=3
/proc/bus/input/devices: 
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 47 structures occupying 1357 bytes.
dmidecode: Table at 0x000EE000.
dmidecode: 
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: 	Vendor: HP
dmidecode: 	Version: W04
dmidecode: 	Release Date: 12/25/2006
dmidecode: 	Address: 0xF0000
dmidecode: 	Runtime Size: 64 kB
dmidecode: 	ROM Size: 4096 kB
dmidecode: 	Characteristics:
dmidecode: 		PCI is supported
dmidecode: 		PNP is supported
dmidecode: 		BIOS is upgradeable
dmidecode: 		BIOS shadowing is allowed
dmidecode: 		ESCD support is available
dmidecode: 		Boot from CD is supported
dmidecode: 		Selectable boot is supported
dmidecode: 		5.25"/360 KB floppy services are supported (int 13h)
dmidecode: 		5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 		3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 		Print screen service is supported (int 5h)
dmidecode: 		8042 keyboard services are supported (int 9h)
dmidecode: 		Serial services are supported (int 14h)
dmidecode: 		Printer services are supported (int 17h)
dmidecode: 		CGA/mono video services are supported (int 10h)
dmidecode: 		ACPI is supported
dmidecode: 		USB legacy is supported
dmidecode: 		BIOS boot specification is supported
dmidecode: 
dmidecode: Handle 0x0100, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: 	Manufacturer: HP
dmidecode: 	Product Name: ProLiant DL320 G5 
dmidecode: 	Version: Not Specified
dmidecode: 	Serial Number: CZJ711088A      
dmidecode: 	UUID: 34313830-3434-435A-4A37-313130383841
dmidecode: 	Wake-up Type: Power Switch
dmidecode: 
dmidecode: Handle 0x0300, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: 	Manufacturer: HP
dmidecode: 	Type: Unknown
dmidecode: 	Lock: Not Present
dmidecode: 	Version: Not Specified
dmidecode: 	Serial Number: CZJ711088A      
dmidecode: 	Asset Tag:                                 
dmidecode: 	Boot-up State: Unknown
dmidecode: 	Power Supply State: Unknown
dmidecode: 	Thermal State: Unknown
dmidecode: 	Security Status: Unknown
dmidecode: 	OEM Information: 0x00000000
dmidecode: 
dmidecode: Handle 0x0400, DMI type 4, 40 bytes
dmidecode: Processor Information
dmidecode: 	Socket Designation: Proc 1
dmidecode: 	Type: Central Processor
dmidecode: 	Family: Xeon
dmidecode: 	Manufacturer: Intel
dmidecode: 	ID: F2 06 00 00 FF FB EB BF
dmidecode: 	Signature: Type 0, Family 6, Model 15, Stepping 2
dmidecode: 	Flags:
dmidecode: 		FPU (Floating-point unit on-chip)
dmidecode: 		VME (Virtual mode extension)
dmidecode: 		DE (Debugging extension)
dmidecode: 		PSE (Page size extension)
dmidecode: 		TSC (Time stamp counter)
dmidecode: 		MSR (Model specific registers)
dmidecode: 		PAE (Physical address extension)
dmidecode: 		MCE (Machine check exception)
dmidecode: 		CX8 (CMPXCHG8 instruction supported)
dmidecode: 		APIC (On-chip APIC hardware supported)
dmidecode: 		SEP (Fast system call)
dmidecode: 		MTRR (Memory type range registers)
dmidecode: 		PGE (Page global enable)
dmidecode: 		MCA (Machine check architecture)
dmidecode: 		CMOV (Conditional move instruction supported)
dmidecode: 		PAT (Page attribute table)
dmidecode: 		PSE-36 (36-bit page size extension)
dmidecode: 		CLFSH (CLFLUSH instruction supported)
dmidecode: 		DS (Debug store)
dmidecode: 		ACPI (ACPI supported)
dmidecode: 		MMX (MMX technology supported)
dmidecode: 		FXSR (Fast floating-point save and restore)
dmidecode: 		SSE (Streaming SIMD extensions)
dmidecode: 		SSE2 (Streaming SIMD extensions 2)
dmidecode: 		SS (Self-snoop)
dmidecode: 		HTT (Hyper-threading technology)
dmidecode: 		TM (Thermal monitor supported)
dmidecode: 		PBE (Pending break enabled)
dmidecode: 	Version: Not Specified
dmidecode: 	Voltage: 1.4 V
dmidecode: 	External Clock: 1066 MHz
dmidecode: 	Max Speed: 4800 MHz
dmidecode: 	Current Speed: 2133 MHz
dmidecode: 	Status: Populated, Enabled
dmidecode: 	Upgrade: ZIF Socket
dmidecode: 	L1 Cache Handle: 0x0710
dmidecode: 	L2 Cache Handle: 0x0720
dmidecode: 	L3 Cache Handle: 0x0730
dmidecode: 	Serial Number: Not Specified
dmidecode: 	Asset Tag: Not Specified
dmidecode: 	Part Number: Not Specified
dmidecode: 
dmidecode: Handle 0x0710, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: 	Socket Designation: Processor 1 Internal L1 Cache
dmidecode: 	Configuration: Enabled, Not Socketed, Level 1
dmidecode: 	Operational Mode: Write Back
dmidecode: 	Location: Internal
dmidecode: 	Installed Size: 64 KB
dmidecode: 	Maximum Size: 32 KB
dmidecode: 	Supported SRAM Types:
dmidecode: 		Burst
dmidecode: 	Installed SRAM Type: Burst
dmidecode: 	Speed: Unknown
dmidecode: 	Error Correction Type: Unknown
dmidecode: 	System Type: Unknown
dmidecode: 	Associativity: 4-way Set-associative
dmidecode: 
dmidecode: Handle 0x0720, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: 	Socket Designation: Processor 1 Internal L2 Cache
dmidecode: 	Configuration: Enabled, Not Socketed, Level 2
dmidecode: 	Operational Mode: Write Back
dmidecode: 	Location: Internal
dmidecode: 	Installed Size: 2048 KB
dmidecode: 	Maximum Size: 16384 KB
dmidecode: 	Supported SRAM Types:
dmidecode: 		Burst
dmidecode: 	Installed SRAM Type: Burst
dmidecode: 	Speed: Unknown
dmidecode: 	Error Correction Type: Unknown
dmidecode: 	System Type: Unknown
dmidecode: 	Associativity: Other
dmidecode: 
dmidecode: Handle 0x0730, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: 	Socket Designation: Processor 1 Internal L3 Cache
dmidecode: 	Configuration: Enabled, Not Socketed, Level 3
dmidecode: 	Operational Mode: Write Back
dmidecode: 	Location: Internal
dmidecode: 	Installeds Bus (USB)
dmidecode: 	External Reference Designator: USB Port 2
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0803, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: J58
dmidecode: 	Internal Connector Type: Access Bus (USB)
dmidecode: 	External Reference Designator: USB Port 3
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0901, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: PCI-E Slot 1
dmidecode: 	Type: x1 PCI Express
dmidecode: 	Current Usage: Available
dmidecode: 	Length: Long
dmidecode: 	Characteristics:
dmidecode: 		3.3 V is provided
dmidecode: 		PME signal is supported
dmidecode: 
dmidecode: Handle 0x0902, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: PCI-E Slot 2
dmidecode: 	Type: x8 PCI Express
dmidecode: 	Current Usage: Available
dmidecode: 	Length: 	Characteristics:
dmidecode: 		3.3 V is provided
dmidecode: 		PME signal is supported
dmidecode: 
dmidecode: Handle 0x0B00, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: 	String 1: Product ID: 418044-421      
dmidecode: 
dmidecode: Handle 0x1000, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: 	Location: System Board Or Motherboard
dmidecode: 	Use: System Memory
dmidecode: 	Error Correction Type: Single-bit ECC
dmidecode: 	Maximum Capacity: 8 GB
dmidecode: 	Error Information Handle: Not Provided
dmidecode: 	Number Of Devices: 4
dmidecode: 
dmidecode: Handle 0x1100, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: 	Array Handle: 0x1000
dmidecode: 	Error Information Handle: Not Provided
dmidecode: 	Total Width: 72 bits
dmidecode: 	Data Width: 64 bits
dmidecode: 	Size: 1024 MB
dmidecode: 	Form Factor: DIMM
dmidecode: 	Set: None
dmidecode: 	Locator: DIMM 01
dmidecode: 	Bank Locator: Not Specified
dmidecode: 	Type: DDR
dmidecode: 	Type Detail: Synchronous
dmidecode: 	Speed: 66z (1.5 ns)
dmidecode: 
dmidecode: Handle 0x1101, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: 	Array Handle: 0x1000
dmidecode: 	Error Information Handle: Not Provided
dmidecode: 	Total Width: 72 bits
dmidecode: 	Data Width: 64 bits
dmidecode: 	Size: No Module Installed
dmidecode: 	Form Factor: DIMM
dmidecode: 	Set: None
dmidecode: 	Locator: DIMM 02
dmidecode: 	Bank Locator: Not Specified
dmidecode: 	Type: DDR
dmidecode: 	Type Detail: Synchronous
dmidecode: 	Speed: Unknown
dmidecode: 
dmidecode: Handle 0x1102, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: 	Array Handle: 0x1000
dmidecode: 	Error Information Handle: Not Provided
dmidecode: 	Total Width: 72 bits
dmidecode: 	Data Width: 64 bits
dmidecode: 	Size: No Module Installed
dmidecode: 	Form Factor: DIMM
dmidecode: 	Set: None
dmidecode: 	Locator: DIMM 03
dmidecode: 	Bank Locator: Not Specified
dmidecode: 	Type: DDR
dmidecode: 	Type Detail: Synchronous
dmidecode: 	Speed: Unknown
dmidecode: 
dmidecode: Handle 0x1103, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: 	Array Handle: 0x1000
dmidecode: 	Error Information Handle: Not Provided
dmidecode: 	Total Width: 72 bits
dmidecode: 	Data Width: 64 bits
dmidecode: 	Size: No Module Installed
dmidecode: 	Form Factor: DIMM
dmidecode: 	Set: None
dmidecode: 	Locator: DIMM 04
dmidecode: 	Bank Locator: Not Specified
dmidecode: 	Type: DDR
dmidecode: 	Type Detail: Synchronous
dmidecode: 	Speed: Unknown
dmidecode: 
dmidecode: Handle 0x1300, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: 	Starting Address: 0x00000000000
dmidecode: 	Ending Address: 0x0003FFFFFFF
dmidecode: 	Range Size: 1 GB
dmidecode: 	Physical Array Handle: 0x1000
dmidecode: 	Partition Width: 0
dmidecode: 
dmidecode: Handle 0x1400, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: 	Starting Address: 0x00000000000
dmidecode: 	Ending Address: 0x0003FFFFFFF
dmidecode: 	Range Size: 1 GB
dmidecode: 	Physical Device Handle: 0x1100
dmidecode: 	Memory Array Mapped Address Handle: 0x1300
midecode: 	Partition Row Position: 1
dmidecode: 	Interleave Position: 1
dmidecode: 	Interleaved Data Depth: Unknown
dmidecode: 
dmidecode: Handle 0x1401, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: 	Starting Address: 0x00000000000
dmidecode: 	Ending Address: 0x000000003FF
dmidecode: 	Range Size: 1 kB
dmidecode: 	Physical Device Handle: 0x1101
dmidecode: 	Memory Array Mapped Address Handle: 0x1300
dmidecode: 	Partition Row Position: 1
dmidecode: 	Interleave Position: 2
dmidecode: 	Interleaved Data Depth: Unknown
dmidecode: 
dmidecode: Handle 0x1402, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: 	Starting Address: 0x00000000000
dmidecode: 	Ending Address: 0x000000003FF
dmidecode: 	Range Size: 1 kB
dmidecode: 	Physical Device Handle: 0x1102
dmidecode: 	Memory Array Mapped Address Handle: 0x1300
dmidecode: 	Partition Row Position: 1
dmidecode: 	Interleave Position: 1
dmidecode: 	Interleaved Data Depth: Unknown
dmidecode: 
dmidecode: Handle 0x1403, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: 	Starting Address: 0x00000000000
dmidecode: 	Ending Address: 0x000000003FF
dmidecode: 	Range Size: 1 kB
dmidecode: 	Physical Device Handle: 0x1103
dmidecode: 	Memory Array Mapped Address Handle: 0x1300
dmidecode: 	Partition Row Position: 1
dmidecode: 	Interleave Position: 2
dmidecode: 	Interleaved Data Depth: Unknown
dmidecode: 
dmidecode: Handle 0x2000, DMI type 32, 11 bytes
dmidecode: System Boot Information
dmidecode: 	Status: No errors detected
dmidecode: 
dmidecode: Handle 0x2600, DMI type 38, 18 bytes
dmidecode: IPMI Device Information
dmidecode: 	Interface Type: KCS (Keyboard Control Style)
dmidecode: 	Specification Version: 2.0
dmidecode: 	I2C Slave Address: 0x10
dmidecode: 	NV Storage Device: Not Present
dmidecode: 	Base Address: 0x0000000000000CA2 (I/O)
dmidecode: 	Register Spacing: Successive Byte Boundaries
dmidecode: 
dmidecode: Handle 0xC100, DMI type 193, 7 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 	 00 C1 00 01 02
dmidecode: 	Strings:
dmidecode: 		N/A
dmidecode: 		08/25/2006
dmidecode: 
dmidecode: Handle 0xC200, DMI type 194, 5 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		C2 05 00 C2 01
dmidecode: 
dmidecode: Handle 0xC300, DMI type 195, 5 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		C3 05 00 C3 01
dmidecode: 	Strings:
dmidecode: 		$0E110774
dmidecode: 
dmidecode: Handle 0xC400, DMI type 196, 5 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		C4 05 00 C4 00
dmidecode: 
dmidecode: Handle 0xC500, DMI type 197, 10 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		C5 0A 00 C5 00 04 00 01 FF 01
dmidecode: 
dmidecode: Handle 0xD300, DMI type 211, 7 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		D3 07 00 D3 00 04 4C
dmidecode: 
dmidecode: Handle 0xC600, DMI type 198, 11 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		C6 0B 00 C6 17 00 3C 00 01
dmidecode: 
dmidecode: Handle 0xC700, DMI type 199, 136 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		C7 88 00 C7 51 00 00 00 06 20 13 07 F2 06 00 00
dmidecode: 		44 00 00 00 06 20 23 05 F6 06 00 00 04 00 00 00
dmidecode: 		05 20 23 12 64 0F 00 00 25 00 00 00 06 20 27 02
dmidecode: 		F4 06 00 00 11 00 00 00 05 20 10 10 F1 06 00 00
dmidecode: 		03 00 00 00 05 20 21 04 49 0F 00 00 0F 00 00 00
dmidecode: 		05 20 15 12 62 0F 00 00 03 00 00 00 05 20 21 04
dmidecode: 		47 0F 00 00 06 00 00 00 05 20 21 04 44 0F 00 00
dmidecode: 		33 00 00 00 06 20 01 05 F5 06 00 00 07 00 00 00
dmidecode: 		06 20 26 04 65 0F 00 00
dmidecode: 
dmidecode: Handle 0xCD00, DMI type 205, 22 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		CD 16 00 CD 01 01 46 41 54 78 00 00 E0 FF 00 00
dmidecode: 		00 00 00 00 10 00
dmidecode: 
dmidecode: Handle 0xCA00, DMI type 202, 8 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		CA 08 00 CA 00 11 FF 01
dmidecode: 
dmidecode: Handle 0xCA01, DMI type 202, 8 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		CA 08 01 CA 01 11 FF 02
dmidecode: 
dmidecode: Handle 0xCA02, DMI type 202, 8 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		CA 08 02 CA 02 11 FF 03
dmidecode: 
dmidecode: Handle 0xCA03, DMI type 202, 8 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		CA 08 03 CA 03 11 FF 04
dmidecode: 
dmidecode: Handle 0xD100, DMI type 209, 20 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		D1 14 00 D1 20 03 00 1B 78 06 1C 5E 21 03 00 1B
dmidecode: 		78 06 1C 5F
dmidecode: 
dmidecode: Handle 0xD400, DMI type 212, 24 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		D4 18 00 D4 24 43 52 55 00 80 F5 FF 00 00 00 00
dmidecode: 		00 40 00 00 00 00 00 00
dmidecode: 
dmidecode: Handle 0xD500, DMI type 213, 28 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		D5 1C 00 5 00 00 36 00 00 00 BF 1F 00 00 46 00
dmidecode: 		00 00 00 00 00 00 00 00 00 00 00 00
dmidecode: 
dmidecode: Handle 0xD600, DMI type 214, 44 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		D6 2C 00 D6 31 31 00 02 0E 20 00 00 13 20 00 00
dmidecode: 		00 60 00 00 00 20 00 00 02 20 00 00 04 20 00 00
dmidecode: 		06 20 00 00 0C 20 00 00 08 20 00 00
dmidecode: 
dmidecode: Handle 0xD700, DMI type 215, 6 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		D7 06 00 D7 00 05
dmidecode: 
dmidecode: Handle 0xDB00, DMI type 219, 8 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		DB 08 00 DB DF 00 00 00
dmidecode: 
dmidecode: Handle 0xDC00, DMI type 220, 45 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		DC 2D 00 DC 08 00 00 C5 00 00 01 00 C5 00 01 02
dmidecode: 		00 C5 01 00 03 00 C5 01 01 04 06 C5 00 00 05 06
dmidecode: 		C5 00 01 06 06 C5 01 00 07 06 C5 01 01
dmidecode: 
dmidecode: Handle 0xDD00, DMI type 221, 20 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		DD 14 00 DD 00 00 00 00 00 00 00 00 00 00 00 00
dmidecode: 		00 00 00 00
dmidecode: 
dmidecode: Handle 0x7F00, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode: 

==============================================
Installer status:
==============================================
Package: usb-storage-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: USB storage support

Package: serial-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: serial-modules
Depends: kernel-image-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Description: Serial drivers

Package: preseed-common
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding

Package: cdrom-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: cdrom-core-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, ide-modules-2.6.18-4-486-di
Description: CDROM support

Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone

Package: localechooser
Status: install ok installed
Version: 1.37
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10

Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for DNS - udeb

Package: cdrom-checker
Status: install ok unpacked
Version: 1.11
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940

Package: lowmemcheck
Status: install ok unpacked
Version: 1.25
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode

Package: cdrom-retriever
Status: install ok installed
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM

Package: main-menu
Status: install ok unpacked
Version: 1.18
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Debian installer main menu

Package: di-utils-shell
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950

Package: di-utils
Status: install ok installed
Version: 1.45
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer

Package: fb-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: fb-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Frame buffer support

Package: scsi-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, parport-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Description: SCSI drivers

Package: pcmcia-storage-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.18-4-486-di, ide-core-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Description: PCMCIA storage drivers

Package: kernel-image-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer

Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System

Package: usb-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-modules
Depends: kernel-image-2.6.18-4-486-di
Description: USB support

Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-2
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules

Package: parport-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: parport-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Parallel port support

Package: rootskel
Status: install ok installed
Version: 1.50
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer

Package: ide-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: ide-core-modules
Depends: kernel-image-2.6.18-4-486-di
Description: IDE support

Package: cdrom-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: cdrom-modules
Depends: ide-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, kernel-image-2.6.18-4-486-di
Description: Esoteric CDROM drivers

Package: udev-udeb
Status: install ok unpacked
Version: 0.105-3
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon

Package: ide-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: ide-modules
Depends: kernel-image-2.6.18-4-486-di, ide-core-modules-2.6.18-4-486-di
Description: IDE drivers

Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-7
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal

Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm

Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb

Package: auto-install
Status: install ok unpacked
Version: 0.03
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19

Package: usb-discover
Status: install ok unpacked
ion: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules

Package: rescue-check
Status: install ok unpacked
Version: 1.9
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested

Package: nano-udeb
Status: install ok unpacked
Version: 2.0.2-1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build

Package: cdebconf-udeb
Status: install ok installed
Version: 0.114
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)

Package: ai-choosers
Status: install ok unpacked
Version: 0.03
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22

Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.)
Description: Tools for manipulating Linux Wireless Extensions

Package: pcmcia-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: pcmcia-modules
Depends: kernel-image-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Description: Common PCMCIA drivers

Package: load-cdrom
Status: install ok installed
Version: 1.14
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16

Package: scsi-common-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-common-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di
Description: Very common SCSI drivers

Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System

Package: acpi-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: acpi-moDepends: kernel-image-2.6.18-4-486-di
Description: ACPI support modules

Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file

Package: floppy-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: floppy-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Floppy driver

Package: usb-serial-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: USB serial drivers

Package: floppy-retriever
Status: install ok unpacked
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy

Package: ethdetect
Status: install ok installed
Version: 1.50
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17

Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-4
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer

Package: initrd-preseed
Status: install ok unpacked
Version: 1.28
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd

Package: archdetect
Status: install ok installed
Version: 1.50
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50)
Description: Hardware architecture detector

Package: save-logs
Status: install ok unpacked
Version: 2.29
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940

Package: di-utils-reboot
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995

Package: anna
Status: install ok installed
Version: 1.27
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do

Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs

Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6

Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)

Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-7
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards

Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.45
Description: Terminfo entries needed by newt/slang in debian installer

Package: fat-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: fat-modules
Depends: kernel-image-2.6.18-4-486-di
Description: FAT filesystem support

Package: hw-detect
Status: install ok installed
Version: 1.50
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it

Package: kbd-chooser
Status: install ok installed
Version: 1.34
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12

Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.50
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions

Package: firewire-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-4-486-di, kernel-image-2.6.18-4-486-di
Description: Core FireWire drivers

Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale

Package: env-preseed
Status: install ok unpacked
Version: 1.28
Description: debconf preseeding via environment variables

Package: mountfloppy
Status: install ok unpacked
Version: 0.11
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy

Package: cdebconf-priority
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930

Package: netcfg
Status: install ok installed
Version: 1.36
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18

Package: file-preseed
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14

Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.114
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)

Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal

Package: firmware-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: firmware-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Firmware request modules

Package: input-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: input-modules
Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: Input devices support

Package: scsi-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Core SCSI subsystem

Package: cdrom-detect
Status: install ok installed
Version: 1.20
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13

Package: sata-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: sata-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di
Description: SATA drivers

Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20070308
Description: debian installation image

Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This minimal package includes the shared library
 for use with the Debian installer.

Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list

Package: apt-mirror-setup
Status: instainstalled
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list

Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70

Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 632
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.76
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65

Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.13
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Choose mirror to install from (program)

Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.14
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62

Package: crc-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: crc-modules
Description: CRC modules
 This package contains CRC support modules.

Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 196
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.2
Depends: libc6 (>= 2.3.6-6), mounted-partitions
Description: Bootstrap the Debian system
 debootstrap is used to create a Debian base system from scratch,
 without requiring the availability of dpkg or apt. It does this by
 downloading .deb files from a mirror site, and carefully unpacking them
 into a directory which can eventually be chrooted into.
 .
 debootstrap-udeb is a minimal package used by debian-installer.

Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.5
Depends: libc6 (>= 2.3.6-6)
Description: DHCP Client for debian-installer
 dhcp-client-udeb is a minimal dhcp package used by the debian-installer.

Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.45
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49)
Description: mapdevfs utility for the debian installer

Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.50
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35

Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-4
Depends: libc6 (>= 2.3.6-6)
Description: Dump Desktop Management Interface data (udeb)

Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
 This package is an e2fsprogs package built for a reduced size, so that
 it can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway it should refuse to install.

Package: efi-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: efi-modules
Description: EFI modules
 This package contains EFI modules.

Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, efi-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
Installer-Menu-Item: 76

Package: ext3-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
 This package contains the EXT3 filesystem module for the Linux kernel.

Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-19
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
 fdisk package

Package: finish-install
Status: install ok half-configured
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.9
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78

Package: gpgv-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.6-1
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: minimal signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC2440.
 .
 This is GnuPG's signature verification tool, gpgv, packaged in minimal
 form for use in debian-installer.

Package: grub-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 376
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.22
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73

Package: jfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: jfs-modules
Description: JFS filesystem support
 This package contains the JFS filesystem module for the Linux kernel.

Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
 This package is a jfsutils package built for reduced size, so that it
 can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway, it should fail to install.

Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifiying
 filesystems by hard-coded device names, but via a logical naming
 system instead.
 .
 This is a minimal package for debian-installer.

Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1584
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-13
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
 .
 This package contains a minimal set of libraries needed for the Debian
 installer.  Do not install it on a normal system.

Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
 This is a udeb, or a microdeb, for the debian-installer.
 .
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.

Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package contains libparted, the required shared library
 used by Parted. This is a cut-down package with no normal
 documentation intended to be used in debian-installer.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
 PC98 disklabels/partition tables, as well as a 'loop' (raw
 disk) type which allows use on RAID/LVM. Filesystems which
 are currently fully supported are ext2, ext3, fat (FAT16
 and FAT32), ReiserFS (with libreiserfs) and linux-swap.
 Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
 UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
 but cannot create, resize or check these filesystems yet.
 .
 Note that ReiserFS support is only enabled if you install
 the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
 removed from sarge, ReiserFS support is not compiled in the
 default package.
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.

Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
 libuuid generates and parses 128-bit universally unique id's (UUID's).
 See RFC 4122 for more information.
 .
 This is a minimal package for debian-installer.

Package: lilo-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75

Package: loop-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: loop-modules
Description: Loopback filesystem support
 This package contains loopback filesystem support for the Linux kernel.

Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-4
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
 This is a udeb, or a microdeb, for the debian-installer.
 .
 This is LVM2, the rewrite of The Linux Logical Volume Manager.  LVM
 supports enterprise level volume management of disk and disk subsystems
 by grouping arbitrary disks into volume groups. The total capacity ume groups can be allocated to logical volumes, which are accessed as
 regular block devices.

Package: md-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 436
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: md-modules
Description: RAID and LVM support
 This package contains RAID and LVM modules for the Linux kernel.

Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-9
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD arrays (software RAID)
 mdadm is a program that can be used to create, manage, and monitor MD
 arrays (e.g. software RAID, multipath devices).
 .
 mdadm-udeb is a minimal package used by the debian-installer.

Package: mdcfg-utils
Status: install ok installed
Priority: optional
bian-installer
Installed-Size: 412
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
 Use this module to configure the MD devices.

Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
 This installer module contains the utility to create ReiserFS filesystems.
 .
  Homepage: http://www.namesys.com/

Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21

Package: nic-extra-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2992
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, crc-modules-2.6.18-4-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
 This package contains rare NIC drivers for the Linux kernel.

Package: nic-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 444
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, firewire-core-modules-2.6.18-4-486-di
Provides: nic-modules
Description: Common NIC drivers
 This package contains common NIC drivers for the Linux kernel.

Package: nic-pcmcia-modules-2.6.18-4-486-di
Status: install ok iiority: standard
Section: debian-installer
Installed-Size: 572
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, nic-extra-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
 This package contains common PCMCIA NIC drivers for the Linux kernel.

Package: nic-shared-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
 This package contains NIC drivers needed by combinations of nic-modules,
 nic-extra-modules, and nic-pcmcia-modules.

Package: nic-usb-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 208
Maintainer: Debian InsTeam <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
 This package contains USB network adapter drivers for the Linux kernel.

Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
 This package will skip installing a boot-loader
Installer-Menu-Item: 77

Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-6+b2
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
 Currently this udeb contains only ntfsresize.

Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
 This package is to be used by boot loader installers to detect other OSes
 available on a system, in a generic format, which it can then adapt to its
 own configuration format.

Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
 Helper program for finding partitions and detecting their size and
 existing file system.

Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package is similar to the "big" parted package, but has
 less cosmetical features resulting in smaller binary. Intended
 to be used in debian-installer.
 .
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, an your own risk.

Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 392
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 68
Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)

Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM

Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 164
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 22
Depends: cdebconf-udeb, partman-base (>= 73), partman (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM

Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs

Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 872
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 105
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-MeItem: 42

Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32

Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
 This package provides partman with two methods to use partitions.
 The first is to format the partition.  The second is to keep and use
 the existing data in the partition as it is.

Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 880
Maitainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20
Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption

Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base, efi-modules
Description: Add to partman support for EFI boot partitions

Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3

Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Teoot@lists.debian.org>
Version: 21
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman

Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman

Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD

Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <d@lists.debian.org>
Version: 47
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
 This udeb provides partman with editing operations for creation
 of new partitions, deletion of partitions and initialisation of the
 partition table.

Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 35
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs

Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
 This udeb allo user to choose how partitions should be used.

Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs

Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 232
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-9
Description: PCMCIA Card Services for Linux (udeb)

Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70

Package: reiserfs-modules-2.6.18-4-486-di
Status: install ok iled
Priority: standard
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
 This package contains the Reiser filesystem module for the Linux kernel.

Package: scsi-extra-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1388
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: scsi-modules-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
 This package contains uncommon SCSI drivers for the Linux kernel.
 This includes SCSI RAID drivers, and some of the less common SCSI
 controllers.

Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62

Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 360
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63

Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
 This package contains the Wireless tools, used to manipulate the Linux
 Wireless Extensions. The Wireless Extension is an interface allowing you to
 set Wireless LAN specific parameters and get the specific stats.
 .
 This is a udeb of the wireless tools.

Package: xfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: ard
Section: debian-installer
Installed-Size: 552
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: xfs-modules
Description: XFS filesystem support
 This package contains the XFS filesystem module for the Linux kernel.

Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
 This package is an xfsprogs package built for reduced size, so that it
 can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway, it should fail to install.

Package: ntfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 248
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
 This package contains the NTFS file system module for the Linux kernel.

Package: qnx4-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
 This package contains the QNX4 filesystem module for the Linux kernel.


-- System Information:
Debian Release: 4.0
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)



--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
  Installer.
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful


The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.



--- End Message ---

Reply to: