--- Begin Message ---
- To: <submit@bugs.debian.org>
- Subject: Package: installation-reports
- From: "Robin Harmsen" <Robin@RHarmsen.nl>
- Date: Thu, 24 Mar 2005 16:20:01 +0100
- Message-id: <00a801c53084$f300f630$0300a8c0@Harmsen.local>
Package: installation-reports
Debian-installer-version: Floppy images build on (20050323) from
http://people.debian.org/~stappers/d-i/images/2005-03-23/sparc32/floppy/
uname -a: Linux (none) 2.4.27-2-sparc32 #1 Tue Feb 15 00:11:41 PST 2005
sparc unknown
Date: 2005-03-24 14:24 CET (GMT+1)
Method:
I booted from the floppy images, into expret mode
I needed to speciefy, root=/dev/fd0
when also the drivers were loaded the rest is done throug LAN
(NATted)
everything is downloaded from http://ftp.surfnet.nl using the
testing distribution
Machine:
Got the machine from someone, haven't got any documentation or
clue what what is
I just love to try to get a good running Linux on it althoug I
am not a Linux "goeroe",
I just know my way around google and some linux basics (with
x86)
Here is a list of what I do know:
Sun SparcStation5 (SS5 / sun4m?) with 170 MHz
128 MB of ram
Floppy Drive
2 internal SCSI drives
SCSI1 (0,1,0) (sda) 1.1 GB QUANTUM FB1080J SUN1.05
SCSI1 (0,3,0) (sdb) 2.2 GB IBM DCAS32160 SUN2.1G
1 extrnal UltraSCSI drive
SCSI2 (0,6,0) (sbc) 18.1 GB SEAGATE ST318404L SUN18G (in a
Sun UltraSCSI casing)
Extrenal SCSI is connected to a SBUS card which also has a
10/100Mbit lan port (HAPPYMEAL)
Processor: SS5 (sun4m)
Memory: 128 MB
Root Device: SCSI
Root Size/partition table:
Partition Table made with installer:
sda, one partition ext3 used as / (root)
sdb, one partition ext3 used as /home
sdc, three partitions
#1 8 GB used as /usr
#2 512 MB used as swap
#4 9.6 GB used as /var
Output of lspci and lspci -n:
no lspci available on boot disks
Modules (auto) loaded:
sunlance (for onbaord LAN)
sunhme (for SBUS HappyMeal LAN card)
scsi_mod
esp (for Sun Microsystems ESP SCSI)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [E]
Configure network HW: [O]
Config network: [O]
Detect CD: [] No CD Drives
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [] Already done previously (with
installer)
Create file systems: [] Already done previously (with
installer)
Mount partitions: [E]
Install base system: [O]
Install boot loader: [O]
Reboot: [E]
Comments/Problems:
Initial boot doesn't work propperly
need to do root=/dev/fd0 otherwise no boot possible
Mounting can't be done throug the installe menu's
It always wan't to format the harddrive, or am I doning something wrong
here?
got some errors while booting, I thinks this is my own fault, as I
didn't format the disks,
but just did a rm * -r afther mounting and before doing a base
installation
Error1:
Warning: Your /etc/fstab does not contain the fsck passno field. I will
kludge around things for you,
but you should fix your /etc/fstab file as soon as possible
Error2:
error while loading shared libraries: libdiscover.so.1: cannot open
object file: No such file or directory
Error3:
can't create /var/run/dhclient.eth0.leases: No such file or directory
exiting. Faild to bring up eth0.
Error4:
/etc/init.d/rcS: line 1: cut: command not found
/etc/init.d/rcS: line 29: [: =: unary operator expected
/etc/init.d/rsC: line 24: /var/run/utmp: No such file or directory
Error5:
Initialising random number generator... urandom start: failed:
at the end I get: Starting system log deamon: syslogd.
but nothing happens for about 5 minutes so I stopped the computer.
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---