--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: Fwd: Package: installation-reports for sarge in a Sun IPX
- From: Mauricio <raub@kudria.com>
- Date: Thu, 27 Jan 2005 19:35:05 -0500
- Message-id: <a06002000be1f37532f17@[10.0.0.10]>
Package: installation-reports
Debian-installer-version: <Fill in date and from where you got the image>
Downloaded at 2005/01/26 from
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/sparc/rc2/sarge-sparc-netinst.iso
uname -a: <The result of running uname -a on a shell prompt>
N/A (well, look for the output below for details)
Kernel: 2.4.27
Date: <Date and time of the install>
Thu Jan 27 00:11:38 2005
Method: <How did you install? What did you boot off? If network
install, from where? Proxied?>
I booted off the netinst.iso cd. As console, I used a Sun
Sparc 20 running Solaris 9.
Machine: <Description of machine (eg, IBM Thinkpad R32)>
Sun IPX, ROM Rev. 2.9
Processor:
SUN4C
Memory:
48 MB memory installed
Root Device: <IDE? SCSI? Name of device?>
Root Size/partition table: <Feel free to paste the full partition
table, with notes on which partitions are mounted where.>
N/A
Output of lspci and lspci -n:
N/A
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [E]
Configure network HW: [ ]
Config network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
raub@kushana-9>script
Script started, file is typescript
raub@kushana-1>tip hardwire
connected
WARNING: Unable to determine keyboard type~
SPARCstation IPX, No Keyboard
ROM Rev. 2.9, 48 MB memory installed, Serial #12648430.
Ethernet address 8:0:20:c0:ff:ee, Host ID: 57c0ffee.
Testing 1 megs of memory ~
Type help for more information
ok boot cdrom
Boot device: /sbus/esp@0,800000/sd@6,0:c File and args:
SILO Version 1.4.8
\
Welcome to Debian GNU/Linux sarge!
This is a Debian installation CDROM, built on 20041121.
Keep it once you have installed your system, as you can boot from it
to repair the system on your hard disk if that ever becomes necessary.
WARNING: You should completely back up all of your hard disks before
proceeding. The installation procedure can completely and irreversibly
erase them! If you haven't made backups yet, remove the rescue CD from
the drive and press L1-A to get back to the OpenBoot prompt.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted
by applicable law.
[ ENTER - Boot install ] [ Type "rescue" - Boot into rescue mode ]
boot:
Uncompressing image...
Loaded kernel version 2.4.27
Loading initial ramdisk (2896142 bytes at 0x0 phys, 0x300000 virt)...
bootmem_init: Scan sp_banks, init_bootmem(spfn[21c],bpfn[21c],mlpfn[2fe3])
free_bootmem: base[0] size[fef000]
free_bootmem: base[1000000] size[1fd5000]
free_bootmem: base[2fdd000] size[6000]
reserve_bootmem: base[300000] size[2c310e]
reserve_bootmem: base[0] size[21c000]
reserve_bootmem: base[21c000] size[600]
Booting Linux...
mem_init: Calling free_all_bootmem().
PROMLIB: Sun Boot Prom Version 2 Revision 2
Linux version 2.4.27-1-sparc32 (joshk@fortissimo.triplehelix.org)
(gcc version 3.3.4 (Debian 1:3.3.4-7)) #1 Tue Aug 24 01:05:41 PDT 2004
ARCH: SUN4C
TYPE: Sun4c SparcStation IPX
Ethernet address: 8:0:20:c0:ff:ee
Loading sun4c MMU routines
Boot time fixup v1.6. 4/Mar/98 Jakub Jelinek (jj@ultra.linux.cz).
Patching kernel for sun4c
SS2 cache bug detected, uncaching trap table page
On node 0 totalpages: 10985
zone(0): 12259 pages.
zone(1): 0 pages.
zone(2): 0 pages.
SUN4C: 63 mmu entries for the kernel
Kernel command line: root=/dev/rd/0 cdrom ramdisk_size=16384 devfs=mount rw
Calibrating delay loop... 79.66 BogoMIPS
Memory: 43352k available (1472k kernel code, 236k data, 144k init, 0k
highmem) [f0000000,02fe3000]
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
sbus0: Clock 20.0 MHz
dma0: Revision 1 PLUS
Sparc Zilog8530 serial driver version 1.68.2.2
Sun Mouse-Systems mouse driver version 1.00
tty00 at 0xffeeb004 (irq = 12) is a Zilog8530
tty01 at 0xffeeb000 (irq = 12) is a Zilog8530
tty02 at 0xffee9004 (irq = 12) is a Zilog8530
tty03 at 0xffee9000 (irq = 12) is a Zilog8530
keyboard: not present
Console: ttyS0 (Zilog8530)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Floppy drive(s): fd0 is 1.44M
FDC 0 is a pre-1991 82077
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 2828k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
VFS: Mounted root (ext2 filesystem).
Trying to move old root to /initrd ... okay
Mounted devfs on /dev
Freeing unused kernel memory: 144k freed
<And this is where it hangs up. It does not seem to reach the part
where it IDs the hard drive. So, I abort it and ask for the name of
the devices in its scsi chain>
Freeing unused kernel memory: 144k freed
~
Type 'go' to resume
ok probe-scsi
Target 3
Unit 0 Disk SEAGATE ST34520N 1498AYZA2C1GCopyright (c)
1997 Seagate All rights reserved 1476
Target 6
Unit 0 Removable Read Only device TOSHIBA CD-ROM XM-5201TA025501/25/95
ok
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---