--- Begin Message ---
Package: installation-reports
Debian-installer-version: 2004-11-25, boot and root diskette images from
http://people.debian.org/~joeyh/d-i/images/daily/floppy/
uname -a: Linux myhostname 2.6.8.1-686 #1 Thu Nov 11 13:18:29 EST 2004
i686 GNU/Linux
Date: 2004-11-25 03z00
Method: Boot floppies, only boot.img and root.img needed as 8129 NIC in
kernel img. I love floppies. Pls keep them, recycleable. Used expert
mode. Used mirrors.kernel.org, no proxy.
Machine: Homegrown dinosaur, mobo has more ISA slots than PCI slots! Old
Award BIOS. Realtek 8129 PCI NIC. I use this old dog as an OGG/mp3
fileserver and a browser cache via NFS. It's basically a power supply
for 4 old IDE drives. It's a headless machine which lives in the closet
with the cat.
Processor: Cyrix/IBM 6x86MX
Memory: about 164MB mem, mixed manufacturers, old, slow
Root Device: hdb. hda is swap (I like to put important stuff on
heads/cylinders away from head/cylinder zero. It's a 'me' thing. Still
superstious about head/cylinder zero.)
Root Size/partition table: 2GB
Filesystem Size Used Avail Use% Mounted on
/dev/hda2 1.8G 381M 1.5G 21% /
tmpfs 78M 0 78M 0% /dev/shm
/dev/hdc 38G 33M 38G 1% /home
Output of lspci and lspci -n:
lspci:
0000:00:00.0 Host bridge: Intel Corp. 430TX - 82439TX MTXC (rev 01)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01)
0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:00:0f.0 VGA compatible controller: Trident Microsystems TGUI
9660/938x/968x (rev d3)
lspci -n:
0000:00:00.0 0600: 8086:7100 (rev 01)
0000:00:07.0 0601: 8086:7110 (rev 01)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.2 0c03: 8086:7112 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 01)
0000:00:0b.0 0200: 10ec:8139 (rev 10)
0000:00:0f.0 0300: 1023:9660 (rev d3)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [ ] no CD
Load installer modules: [O]
Detect hard drives: [ ]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
1. During the package selection process, I chose File Server and also
Manual Select (or whatever it is), which threw me into aptitude, which I
have not used (I have been using dselect). So it was an 'unplanned
surprise', and I had to carefully learn aptitude on-the-fly without
messing up the last part of the install. Perhaps a user-choice here
between manual using dselect or manual using aptitude, because this is
the last part of the install and it would be sad to mess it up just
because of not being familiar with aptitude. Anyway, it seems to have
installed well for me, and must therefore be donkey-proof.
2. I originally chose 'manual' to unselect the exim package, as I don't
need a mail-server, and could not find it in aptitude to unselect, so it
probably installed it anyway. The base system configuration menu asked
me to configure the MTA. I just chose 'no configure at this time', then
later uninstalled exim4 with dselect. Perhaps a specific user choice as
to whether a mail service is required.
3. I saw some hda IDE0 timeout/crc errors during boot when reiserfs was
playing the transaction log, but this could be my hardware, which is
very old. They dissappeared when I turned off the cpu overclocking in
the BIOS. Looks like 2.6.8.1 might not like overclocking. 2.4.18-bf2.4
didnt mind it.
4. I though it odd that appletalk is installed by default as I have
never used it myself. I killed it and its modules with dselect. Perhaps
a user-choice if the user selects fileserver in tasksel?
5. It went very smoothly for me. The Debian U.S. mirror was down, and,
for a while, it looked like an installer script had hung. I ctrl-C'd
out, changed to the kernel.org mirror, and went along without problems.
Perhaps a timeout to tell user that the mirror, not the installed, is
dead. Perhaps a sig trap for people like me who Ctrl-C out of a script
to see if the mirror had been contacted at all, and, if not, to ask for
another mirror.
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---