--- Begin Message ---
Package: installation-reports
INSTALL REPORT
Debian-installer-version: 2004-11-14
uname -a: Linux phillipsa-old 2.6.8-1-386 #1 Thu Oct 7 02:21:16 EDT 2004 i686 GNU/Linux
Date: 2004-11-17
Method: Net install off of ftp.us.d.o using a netinst cd snapshot, through a local proxy
Machine: HP PL-Class workstation
Processor: 750 mHz PIII
Memory: 512
Root Device: /dev/sda2
Root Size/partition table:
Device Boot Start End Blocks Id System
/dev/sda1 * 1 16 128488+ 83 Linux (/boot)
/dev/sda2 17 1964 15647310 83 Linux (/)
/dev/sda3 1965 2213 2000092+ f W95 Ext'd (LBA)
/dev/sda5 1965 2213 2000061 82 Linux swap
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:13.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2)
0000:02:04.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 26)0000:02:05.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 36)
0000:00:00.0 0600: 8086:7190 (rev 03)
0000:00:01.0 0604: 8086:7191 (rev 03)
0000:00:07.0 0601: 8086:7110 (rev 02)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.2 0c03: 8086:7112 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 02)
0000:00:13.0 0604: 1011:0024 (rev 03)
0000:01:00.0 0300: 10de:0181 (rev a2)
0000:02:04.0 0100: 1000:000f (rev 26)
0000:02:05.0 0200: 1022:2000 (rev 36)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
I get video corruption right after the preseed is downloaded. This goes
away after changing consoles. Could be just this box, haven't tried
others.
I can't seem to get exim to configure if preseeded. What I want is this,
but I've tried other combinations with a similar non-result. Sorry I
can't describe this better. I haven't had much luck configuring it by
hand (not using preseed) during the install either.
exim4-base exim4/move_exim3_spool boolean false
exim4-base exim4/purge_spool boolean false
exim4-config exim4/dc_eximconfig_configtype select mail sent by smarthost; received via SMTP or fetchmail sent and received directly using SMTP
exim4-config exim4/dc_local_interfaces string 127.0.0.1
exim4-config exim4/dc_minimaldns boolean false
exim4-config exim4/dc_noalias_regenerate boolean false
exim4-config exim4/dc_other_hostnames string
exim4-config exim4/dc_postmaster string root
exim4-config exim4/dc_readhost string
exim4-config exim4/dc_relay_domains string
exim4-config exim4/dc_relay_nets string
exim4-config exim4/dc_smarthost string atlantic-exgate.atlantic.int.ec.gc.ca
exim4-config exim4/exim3_upgrade boolean true
exim4-config exim4/hide_mailname boolean false
exim4-config exim4/use_split_config boolean false
locale.gen doesn't get filled with the locale list I preseed. This is
really annoying because I need en_CA.*, en_US.* and fr_CA.* to work.
Maybe this isn't supposed to work?
locales locales/default_environment_locale select en_CA.UTF-8
locales locales/locales_to_be_generated multiselect en_CA ISO-8859-1, en_CA.UTF-8 UTF-8, en_US ISO-8859-1, en_US.ISO-8859-15 ISO-8859-15, en_US.UTF-8 UTF-8, fr_CA ISO-8859-1, fr_CA.UTF-8 UTF-8
The following partman recipe should create /boot, / and swap as primary
partitions, only the first two are created as primary. This is forgivable
though. :)
d-i partman-auto/expert_recipe string Standard (/boot, / and swap) ::
128 128 256 ext3 $primary{ } $bootable{ } method{ format } format{ } use_filesystem{ } filesystem{ ext3 } mountpoint{ /boot } . 500 10000 1000000000 ext3 $primary{ } method{ format } format{ } use_filesystem{ } filesystem{ ext3 } mountpoint{ / } . 2048 2048 2252 linux-swap $primary{ } method{ swap } format{ } .
It would be nice if the preseed overwrote the already selected country,
when grabbing it from a URL.
I'm using this to get the proxy into apt.conf. Don't know if it's still
needed, as I saw a bug related to this that was recently closed.
base-config base-config/early_command string test -f /etc/apt/apt.conf || echo 'Acquire::http::Proxy "http://whxs4.dart.ns.ec.gc.ca:3128";;' > /etc/apt/apt.conf
It would be nice to preseed additional APT sources and packages to install
so I don't have to use this late_command:
base-config base-config/late_command string echo >> /etc/apt/sources.list && echo 'deb http://phillipsa.dart.ns.ec.gc.ca/~andrew/debian-ec/apt unstable/' >> /etc/apt/sources.list && echo 'deb-src http://phillipsa.dart.ns.ec.gc.ca/~andrew/debian-ec/apt unstable/' >> /etc/apt/sources.list && apt-get update && apt-get --yes install ec-standard
Being able to add additional tasks through preseed would be nice to do
too. This would help with the above. We have our own meta package for
development and desktop machines which I am installing after setup.
If the URL in preseed/url isn't found, could a dialog ask for a different
url to try? Maybe ask for a URL if it's set to ask or blank?
--
Andrew Phillips
Informatics Service Branch
Environment Canada
(902) 426-6262
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---