[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#280019: marked as done (Installation Report - No problems)



Your message dated Wed, 08 Sep 2010 03:57:45 +0000
with message-id <E1OtBn7-0004FQ-VN@ravel.debian.org>
and subject line Closing old installation report #280019
has caused the Debian Bug report #280019,
regarding Installation Report - No problems
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
280019: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=280019
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports

INSTALL REPORT

Debian-installer-version: 06/11/2004 - debian-installer page
uname -a: Linux hellboy 2.6.8-1-386 #1 Mon Sep 13 23:29:55 EDT 2004 i686 GNU/Linux
Date: Sat Nov  6 12:07:57 CST 2004
Method: How did you install?  What did you boot off?  If network
      install, from where?  Proxied?
I used the boot cd - the netinst version.  I used the linux26 kernel to install.
Machine: MSI Nforce2 Motherboard based system
Processor: AMD Athlon XP 2500+/333FSB
Memory: 512MB PC3200 DDR DRAM
Root Device: IDE - Western Digital WD1600JD
Root Size/partition table:  Feel free to paste the full partition
      table, with notes on which partitions are mounted where.
         Device Boot      Start         End      Blocks   Id  System
	 /dev/hda1   *           1        9727    78132096    7  HPFS/NTFS - /mnt/WinXP
	 /dev/hda2            9728        9849      979965   82  Linux swap / Solaris - Swap
	 /dev/hda3            9850       19457    77176260   83  Linux - /
	 
Output of lspci and lspci -n:
lspci - 
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
0000:01:07.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
0000:01:08.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
0000:01:09.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)
0000:02:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro]
0000:02:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary)
lspci -n -
0000:00:00.0 0600: 10de:01e0 (rev c1)
0000:00:00.1 0500: 10de:01eb (rev c1)
0000:00:00.2 0500: 10de:01ee (rev c1)
0000:00:00.3 0500: 10de:01ed (rev c1)
0000:00:00.4 0500: 10de:01ec (rev c1)
0000:00:00.5 0500: 10de:01ef (rev c1)
0000:00:01.0 0601: 10de:0060 (rev a4)
0000:00:01.1 0c05: 10de:0064 (rev a2)
0000:00:02.0 0c03: 10de:0067 (rev a4)
0000:00:02.1 0c03: 10de:0067 (rev a4)
0000:00:02.2 0c03: 10de:0068 (rev a4)
0000:00:08.0 0604: 10de:006c (rev a3)
0000:00:09.0 0101: 10de:0065 (rev a2)
0000:00:1e.0 0604: 10de:01e8 (rev c1)
0000:01:07.0 0401: 1013:6003 (rev 01)
0000:01:08.0 0c00: 1106:3044 (rev 46)
0000:01:09.0 0200: 11ad:0002 (rev 20)
0000:02:00.0 0300: 1002:4e48
0000:02:00.1 0380: 1002:4e68


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:

I would still like the ability to NOT use the pool on the netinst cd, and I would also like to select between testing and unstable.  Otherwise the install is now as smooth as butter.

Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.


--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
  Installer.
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful


The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.



--- End Message ---

Reply to: