[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#277869: marked as done (Successfull install)

Your message dated Wed, 08 Sep 2010 03:57:44 +0000
with message-id <E1OtBn6-0004CW-GY@ravel.debian.org>
and subject line Closing old installation report #277869
has caused the Debian Bug report #277869,
regarding Successfull install
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org

277869: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=277869
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports


Debian-installer-version: Sarge installer, daily netinst.iso 2004-10-21
uname -a: Linux phb 2.6.8-1-386 #1 Thu Oct 7 02:21:16 EDT 2004 i686 GNU/Linux
Date: Sat Oct 23 04:48:17 EEST 2004
Method: Booted from netinst CD. Rest from file system, had copied
  partial debian mirror there previously. 

Machine: Self built, AMD Thunderbird 1200MHz, 384M, 30G + 120G, 
Processor: AMD Athlon 1200Mhz
Memory: 384M
Root Device: IDE 30G
Root Size/partition table:  
# /etc/fstab: static file system information.
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
/dev/hda4       /               ext3    defaults,errors=remount-ro 0       1
/dev/hda1       /boot           ext3    defaults        0       2
/dev/hda3       none            swap    sw              0       0
/dev/hdc        /media/cdrom0   iso9660 ro,user,noauto  0       0
phb:~# fdisk -l

Disk /dev/hda: 20.5 GB, 20576747520 bytes
255 heads, 63 sectors/track, 2501 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1           6       48163+  83  Linux
/dev/hda2               7        1222     9767520    c  W95 FAT32 (LBA)
/dev/hda3            1223        1253      249007+  82  Linux swap
/dev/hda4            1254        2501    10024560   83  Linux

Disk /dev/hdb: 123.5 GB, 123522416640 bytes
255 heads, 63 sectors/track, 15017 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hdb1               1       15017   120624021    5  Extended
/dev/hdb5               1        7295    58597024+  83  Linux
/dev/hdb6            7296       15017    62026933+  83  Linux

Output of lspci and lspci -n:

(lspci ; lspci -n) | sort
0000:00:0a.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
0000:00:0a.0 0200: 10b7:9200 (rev 74)
0000:00:00.0 Host bridge: ALi Corporation M1647 Northbridge [MAGiK 1 / MobileMAGiK 1] (rev 04)
0000:00:00.0 0600: 10b9:1647 (rev 04)
0000:00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller
0000:00:01.0 0604: 10b9:5247
0000:00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:02.0 0c03: 10b9:5237 (rev 03)
0000:00:04.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
0000:00:04.0 0101: 10b9:5229 (rev c4)
0000:00:06.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:06.0 0c03: 10b9:5237 (rev 03)
0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
0000:00:07.0 0601: 10b9:1533
0000:00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
0000:00:09.0 0401: 1102:0002 (rev 07)
0000:00:09.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
0000:00:09.1 0980: 1102:7002 (rev 07)
0000:00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
0000:00:11.0 0680: 10b9:7101
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1)
0000:01:00.0 0300: 10de:0110 (rev a1)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]


Successful install. Installer correctly detected Win98 on disk and
added it to boot menu.

For some reason I saw in installer main menu the menu item
  "Postconfigure language related parameters"
after returning to main menu from install additional packages. It
complained about problems with some packages, but when I ran that
install menu item again, there were no more errors.

Otherwise installer was in finnish, but that one menu item line
appeared, and it was in english.

Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.

--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
- it was reported with a pre-lenny version of Debian
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful

The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.

--- End Message ---

Reply to: