Bug#274883: marked as done (Package: installation-reports)
Your message dated Wed, 08 Sep 2010 03:57:41 +0000
with message-id <E1OtBn3-00047L-Sj@ravel.debian.org>
and subject line Closing old installation report #274883
has caused the Debian Bug report #274883,
regarding Package: installation-reports
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact firstname.lastname@example.org
Debian Bug Tracking System
Contact email@example.com with problems
--- Begin Message ---
- To: firstname.lastname@example.org
- Subject: Package: installation-reports
- From: "Jeremy H." <email@example.com>
- Date: Mon, 4 Oct 2004 08:07:32 -0700 (PDT)
- Message-id: <firstname.lastname@example.org>
Linux dralion 2.6.8-1-386 #1 Mon Sep 13 23:29:55 EDT
2004 i686 GNU/Linux
2004.10.03 @ 03:40 MDT
CD-ROM Boot/CD-ROM for base install. . .
dselect post install; proxy did not work with my ad
blocking proxy (privoxy).
Gateway Solo 9300 Laptop
IDE -> /dev/hda4 xfs
Root Size/partition table:
$ df -kh
Filesystem Size Used Avail Use% Mounted on
/dev/hda4 7.1G 3.0G 4.2G 42% /
tmpfs 142M 0 142M 0% /dev/shm
/dev/hda1 108M 6.5M 101M 6% /boot
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX -
82443BX/ZX/DX Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX -
82443BX/ZX/DX AGP bridge (rev 03)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB
PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB
PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB
PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4
ACPI (rev 03)
0000:00:08.0 Multimedia audio controller: ESS
Technology ES1978 Maestro 2E (rev 10)
0000:00:0a.0 CardBus bridge: Texas Instruments PCI1450
0000:00:0a.1 CardBus bridge: Texas Instruments PCI1450
0000:01:00.0 VGA compatible controller: ATI
Technologies Inc Rage Mobility P/M AGP 2x (rev 64)
0000:02:00.0 Network controller: Broadcom Corporation
BCM4306 802.11b/g Wireless LAN Controller (rev 03)
$ lspci -n
0000:00:00.0 0600: 8086:7190 (rev 03)
0000:00:01.0 0604: 8086:7191 (rev 03)
0000:00:07.0 0601: 8086:7110 (rev 02)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.2 0c03: 8086:7112 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 03)
0000:00:08.0 0401: 125d:1978 (rev 10)
0000:00:0a.0 0607: 104c:ac1b (rev 03)
0000:00:0a.1 0607: 104c:ac1b (rev 03)
0000:01:00.0 0300: 1002:4c4d (rev 64)
0000:02:00.0 0280: 14e4:4320 (rev 03)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] =
didn't try it
Initial boot worked: [ O ]
Configure network HW: [ O ]
Config network: [ ]
Detect CD: [ O ]
Load installer modules: [ O ]
Detect hard drives: [ O ]
Partition hard drives: [ E ]
Create file systems: [ O ]
Mount partitions: [ O ]
Install base system: [ O ]
Install boot loader: [ E ]
Reboot: [ O ]
-> Partition hard drives
Able to use existing ext3 partition without
formatting. Install routine unclear: will partition
be formatted? Will the data be lost?
-> Install boot loader
Used GRUB instead of LILO (maybe create option for
one or the other?)
Debian Sarge installed and working with ndiswrapper
for WiFi, kde 3.2, etc.
Keep it Simple! Small base install makes Debian my
distro of choice. Keep up the good work and let me
know how I can be of furthur assistance.
Hope this helps. . .
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
- it was reported with a pre-lenny version of Debian
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---