[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#274314: marked as done (install report)

Your message dated Wed, 08 Sep 2010 03:57:41 +0000
with message-id <E1OtBn3-00045t-4N@ravel.debian.org>
and subject line Closing old installation report #274314
has caused the Debian Bug report #274314,
regarding install report
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org

274314: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=274314
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports


Debian-installer-version: <Set-27-2004. Address: http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/i386/current/sarge-i386-netinst.iso> uname -a: <Linux frank 2.6.8-1-386 #1 Mon Sep 13 23:56:00 EDT 2004 i686 GNU/Linux>
Date: <Set-29-2004. Around 6:00PM>
How did you install?
Booted sarge install cd. What did you boot off? The cd, address above. If network install, from where? Proxied?
No network install, no proxy.

Machine: <Assembled from parts>
Processor: Athlon XP 1600
Memory: 256MB DDR
Motherboard: Abit KG-7
2 Ethernet cards: Encore (8139c chip, see lspci...).
Matshita CDRW CW-7585
40GB Harddisk Samsung SP0411N 7200rpm
80 Seagate Barracuda ST380021A 7200rpm

Root Device: </dev/hda IDE>
Root Size/partition table:  Feel free to paste the full partition
     table, with notes on which partitions are mounted where.

Output of fdisk -l on both disks:

Disk /dev/hda: 40.0 GB, 40060403712 bytes
255 heads, 63 sectors/track, 4870 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot      Start         End      Blocks   Id  System
/dev/hda1               1         631     5068476   83  Linux
/dev/hda2 * 632 2201 12611025 83 Linux #(/ of installed suse 9.1)
/dev/hda4            2202        4870    21438742+   f  W95 Ext'd (LBA)
/dev/hda5            2202        3500    10434186   83  Linux
/dev/hda6            3501        4870    11004493+  83  Linux

Disk /dev/hdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

  Device Boot      Start         End      Blocks   Id  System
/dev/hdb1               1          61      489951   82  Linux swap
/dev/hdb2              62        4001    31648050   83  Linux
/dev/hdb3            4002        6001    16065000   83  Linux
/dev/hdb4            6002        9728    29937127+   f  W95 Ext'd (LBA)
/dev/hdb5            6002        8500    20073186   83  Linux
/dev/hdb6            8501        9728     9863878+  83  Linux

Output of lspci and lspci -n:


0000:00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] System Controller (rev 13) 0000:00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] AGP Bridge 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 0000:00:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 0000:00:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:00:0f.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a) 0000:00:0f.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 0a) 0000:01:05.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2)

lspci -n:
0000:00:00.0 0600: 1022:700e (rev 13)
0000:00:01.0 0604: 1022:700f
0000:00:07.0 0601: 1106:0686 (rev 40)
0000:00:07.1 0101: 1106:0571 (rev 06)
0000:00:07.4 0c05: 1106:3057 (rev 40)
0000:00:09.0 0400: 109e:036e (rev 11)
0000:00:09.1 0480: 109e:0878 (rev 11)
0000:00:0b.0 0200: 10ec:8139 (rev 10)
0000:00:0d.0 0200: 10ec:8139 (rev 10)
0000:00:0f.0 0401: 1102:0002 (rev 0a)
0000:00:0f.1 0980: 1102:7002 (rev 0a)
0000:01:05.0 0300: 10de:0110 (rev b2)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [0]
Configure network HW:   [0]
Config network:         [E]
Detect CD:              [0]
Load installer modules: [0]
Detect hard drives:     [0]
Partition hard drives:  [ ]
Create file systems:    [0]
Mount partitions:       [0]
Install base system:    [0]
Install boot loader:    [0]
Reboot:                 [0]


<Description of the install, in prose, and any thoughts, comments
     and ideas you had during the initial install.>
Quite nice install process. I was surprised, since my last trial with a netinst cd and a business card cd, which didn't succeeded in the same machine (install process hanged).

For this time I chose expert26. Partitioning: full control. The machine has a working suse 9.1 also, and I needed to install Lilo in /dev/hdb6 (choosen location for Sarge), as to not mess with suse's
grub in /dev/hda1.

The partition tool was used only to choose / as /dev/hdb6 and swap. I didn't partition anything
beyond that. Formatted / with raiser.

Everything works great. I didn't edit grub's menu.lst, to load Debian, as I use smart boot manager
(from floppy) to load both.

- The config network error above is about my second eth card. Its not exactly an error. The machine nat's internet for another win machine and this setup wasn't done/asked. No problem doing it by hand,
but why not include it in the setup?

- The tv/radio card has a few issues: The way d-i installed it, I can't switch channels (no tuner module loaded, I guess...). Perhaps you might want to include steps for choosing which tv card is in the machine (cardlist), which tuner and whether it has radio or not. In my previous Debian install, I modprobed
the card with:
modprobe bttv card=37 radio=1
modprobe tuner type=2

These are the relevant dmesg lines (Please notice the kernel has been upgraded to 2.6.8-1-k7, no more *-i386):

frank:/home/bruno# dmesg |grep bttv
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:00:09.0, irq: 5, latency: 32, mmio: 0xde001000
bttv0: using:  *** UNKNOWN/GENERIC ***  [card=0,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffc0ff [init]
bttv: readee error
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
Temp/fan sensors:

d-i didn't install/load modules for my sensors by default, it seems. If I do:
I get a
No sensors found!

Then, I do:
modprobe i2c-isa
modprobe via686a

I get:
Adapter: ISA adapter
CPU core:  +1.81 V  (min =  +0.06 V, max =  +3.10 V)
+2.5V:     +2.69 V  (min =  +0.06 V, max =  +3.10 V)
I/O:       +3.53 V  (min =  +3.12 V, max =  +3.45 V)   ALARM
+5V:       +4.93 V  (min =  +4.73 V, max =  +5.20 V)
+12V:     +12.48 V  (min = +11.35 V, max = +12.48 V)
CPU Fan:  5720 RPM  (min = 3000 RPM, div = 2)
P/S Fan:     0 RPM  (min = 3000 RPM, div = 2)          ALARM
SYS Temp:  +38.4°C  (high =  +146°C, hyst =   -71°C)
CPU Temp:  +52.6°C  (high =  +146°C, hyst =   -71°C)
SBr Temp:  +23.1°C  (high =   +65°C, hyst =   +60°C)

Athlon cooling: How about installing some Athlon cooling software? Athcool runs fine here.

After all installs, I apt-getted X and kde. Its running quite ok.

Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.

--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
- it was reported with a pre-lenny version of Debian
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful

The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.

--- End Message ---

Reply to: