--- Begin Message ---
Package: installation-reports
INSTALL REPORT
Debian-installer-version: daily build 20040923 (businesscard)
uname -a:
Linux feynman 2.6.8-1-386 #1 Sat Aug 28 13:18:58 EDT 2004 i686 GNU/Linux
Date: 20040923
Method:
Boot from CD, network configuration from DHCP
Packages retrieved from internet
Machine:
Processor: AMD Athlon 64 3500+
Memory: 1 GB
Root Device: SATA, Samsung SP1614C
Root Size/partition table:
/dev/sda1 / ext3 7GB
/dev/sda2 ext3 7GB (reserved for amd64 /)
/dev/sda7 /home ext3 130GB
/dev/sda6 /var ext3 15GB
/dev/sda5 none swap 1GB
/dev/hda /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0282
0000:00:00.1 Host bridge: VIA Technologies, Inc.: Unknown device 1282
0000:00:00.2 Host bridge: VIA Technologies, Inc.: Unknown device 2282
0000:00:00.3 Host bridge: VIA Technologies, Inc.: Unknown device 3282
0000:00:00.4 Host bridge: VIA Technologies, Inc.: Unknown device 4282
0000:00:00.7 Host bridge: VIA Technologies, Inc.: Unknown device 7282
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800 South]
0000:00:05.0 VGA compatible controller: STMicroelectronics STG4000 [3D Prophet Kyro Series] (rev 01)
0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
0000:00:0e.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
lspci -n
0000:00:00.0 0600: 1106:0282
0000:00:00.1 0600: 1106:1282
0000:00:00.2 0600: 1106:2282
0000:00:00.3 0600: 1106:3282
0000:00:00.4 0600: 1106:4282
0000:00:00.7 0600: 1106:7282
0000:00:01.0 0604: 1106:b188
0000:00:05.0 0300: 104a:0010 (rev 01)
0000:00:0b.0 0200: 10ec:8169 (rev 10)
0000:00:0e.0 0c00: 1106:3044 (rev 46)
0000:00:0f.0 0104: 1106:3149 (rev 80)
0000:00:0f.1 0101: 1106:0571 (rev 06)
0000:00:10.0 0c03: 1106:3038 (rev 81)
0000:00:10.1 0c03: 1106:3038 (rev 81)
0000:00:10.2 0c03: 1106:3038 (rev 81)
0000:00:10.3 0c03: 1106:3038 (rev 81)
0000:00:10.4 0c03: 1106:3104 (rev 86)
0000:00:11.0 0601: 1106:3227
0000:00:11.5 0401: 1106:3059 (rev 60)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [E/O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
I first tried to start the installation in default mode (2.4 kernel)
On first hardware detection the system hang whilke trying to install
sd_mod. While it is certainly acceptable that on a SATA machine install
only works with 2.6, the installer shouldn't hang, but give a meaningful
error message. After booting with linux2.6 the install run flawlessly.
Great work!
Gruesse,
--
Frank Lichtenheld <djpig@debian.org>
www: http://www.djpig.de/
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---