[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#272009: marked as done (Debian Installer RC1 -- installation report)

Your message dated Wed, 08 Sep 2010 03:57:39 +0000
with message-id <E1OtBn1-00041N-8P@ravel.debian.org>
and subject line Closing old installation report #272009
has caused the Debian Bug report #272009,
regarding Debian Installer RC1 -- installation report
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org

272009: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=272009
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports


Debian-installer-version: Debian-Installer RC1, fetched on August 29, 2004 
from ftp.de.debian.org
uname -a: Linux miranda 2.4.26-1-386 #1 Thu Jul 22 12:46:23 JST 2004 i686 
Method: Booted from netinst CD image of the installer. Base system installed 
from CD. The rest of packages were installed using apt-get/dselect from 
ftp.de.debian.org. No proxy connection.
Machine: PC
Processor: AMD Duron 800MHz (Spitfire)
Memory: 256 MB
Root Device: ATA33 drive (Seagate) root=/dev/hda7
Root Size/partition table:

Disk /dev/hda: 17.2 GB, 17245863936 bytes
255 heads, 63 sectors/track, 2096 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

              Device Boot      Start         End      Blocks   Id  System
not used   /dev/hda1               1           6       48163+  83  Linux
           /dev/hda2               7        1785    14289817+   f  W95 Ext'd 
           /dev/hda3   *        1786        2096     2498107+   c  W95 FAT32 
/var       /dev/hda5               7          79      586341   83  Linux
/usr       /dev/hda6              80         452     2996091   83  Linux
/          /dev/hda7   *         453         549      779121   83  Linux
swap       /dev/hda8             550         580      248976   82  Linux swap
/home      /dev/hda9             581        1785     9679131   83  Linux

Output of lspci and lspci -n: 
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] 
(rev 03)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] 
(rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 16)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 16)
0000:00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] 
(rev 40)
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 
Audio Controller (rev 50)
0000:00:09.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 
0000:00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV10DDR [GeForce 
256 DDR] (rev 10)

lspci -n:
0000:00:00.0 0600: 1106:0305 (rev 03)
0000:00:01.0 0604: 1106:8305
0000:00:07.0 0601: 1106:0686 (rev 40)
0000:00:07.1 0101: 1106:0571 (rev 06)
0000:00:07.2 0c03: 1106:3038 (rev 16)
0000:00:07.3 0c03: 1106:3038 (rev 16)
0000:00:07.4 0600: 1106:3057 (rev 40)
0000:00:07.5 0401: 1106:3058 (rev 50)
0000:00:09.0 0401: 1274:1371 (rev 06)
0000:00:0a.0 0200: 10ec:8029
0000:01:00.0 0300: 10de:0101 (rev 10)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [ ]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]


Initially I had had the idea to use the very small partition /dev/hda1 as a 
(and /dev/hda7 as /tmp), but it turned out to be too small! Thus it was 
to use hda7 as root to avoid repartitionning (will do it later).
By the way, the idea was proper for installation of woody.
After using hda7 as a root, installation process went very smoothly. 

What is my feeling, debian should also offer nice, graphical environment of
installer. Not that this one is bad (personally I like it), but text ui may be
slightly archaic for some users.

Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.

--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
- it was reported with a pre-lenny version of Debian
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful

The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.

--- End Message ---

Reply to: