Bug#271840: marked as done (Registration)
Your message dated Wed, 08 Sep 2010 03:57:39 +0000
with message-id <E1OtBn1firstname.lastname@example.org>
and subject line Closing old installation report #271840
has caused the Debian Bug report #271840,
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact email@example.com
Debian Bug Tracking System
Contact firstname.lastname@example.org with problems
--- Begin Message ---
Debian-installer-version: 2004-08-30 http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc1/sarge-i386-netinst.iso
uname -a: Linux winter.infriesland.de 2.4.26-1-386 #1 Tue Aug 24 13:31:19 JST 2004 i686 GNU/Linux
Method: I made the download with my former installation of Debian
3.0 an burnt the image on CD-RW. Than I rebooted and installed
on a free partition. The home directory is on an extra partition.
The swap partition has about 540 MB.
Machine: Asrock board (K7VT2) with LAN onboard;
Symbios Logic SCSI controller 53c810; 2 hard disks; 2
SCSI-CDROMs; DVD-Burner GSA 4082 B
Processor: AMD Athlon XP 2200+
Memory: 256 KB
Root Device: IDE / ST360020A
Root Size/partition table: / = 4,200 MB
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
0000:00:09.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev 12)
0000:00:0c.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
0000:00:0d.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT82 3x/A/C PIPC Bus Master IDE (rev 06)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15)
lspci -n >>
0000:00:00.0 0600: 1106:3099
0000:00:01.0 0604: 1106:b099
0000:00:09.0 0100: 1000:0001 (rev 12)
0000:00:0c.0 0280: 1814:0201 (rev 01)
0000:00:0d.0 0401: 1274:5000 (rev 01)
0000:00:10.0 0c03: 1106:3038 (rev 80)
0000:00:10.1 0c03: 1106:3038 (rev 80)
0000:00:10.2 0c03: 1106:3038 (rev 80)
0000:00:10.3 0c03: 1106:3104 (rev 82)
0000:00:11.0 0601: 1106:3177
0000:00:11.1 0101: 1106:0571 (rev 06)
0000:00:12.0 0200: 1106:3065 (rev 74)
0000:01:00.0 0300: 10de:002d (rev 15)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Before I had Debian 3.0 without graphical login. If I remember
correctly, I just had to change the target runlevel. Now the
2nd runlevel brings a grahical login. I think, the installer
did not ask me about that.
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to email@example.com.
Regards (and many thanks)
Hamburger Str. 3 * D-26382 Wilhelmshaven
Telefon +49 (0) 4421 36 75 95 * Mobil +49 (0) 170 30 59 22 0
PGP Public Key: http://www.infriesland.de/mayerhofer/pgp.html
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
- it was reported with a pre-lenny version of Debian
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---