[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#269812: marked as done ((no subject))

Your message dated Wed, 08 Sep 2010 03:57:37 +0000
with message-id <E1OtBmz-0003x4-Bh@ravel.debian.org>
and subject line Closing old installation report #269812
has caused the Debian Bug report #269812,
regarding (no subject)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
269812: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=269812
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

INSTALL REPORT

Debian-installer-version: Debian GNU/Linux testing _Sarge_ - Official NetInst Snapshot i386 Binary-1 (20040815)

uname -a: Linux zeus 2.6.7-1-386 #1 Thu Jul 8 05:08:04 EDT 2004 i686 GNU/Linux

Date: 2004-09-02

Method: How did you install?  CD-ROM + apt (/etc/apt/sources.list)
deb http://ftp2.it.debian.org/debian/ testing main
deb-src http://ftp2.it.debian.org/debian/ testing main
deb http://security.debian.org/ testing/updates main

Machine: <Description of machine (eg, IBM Thinkpad R32)>

Processor: Intel Celeron 660

Memory: 256 Mb

Root Device: IDE /dev/hda1
Root Size/partition table:  
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
/dev/hda1       /               ext3    defaults,errors=remount-ro 0       1
/dev/hda6       /home           xfs     defaults        0       2
/dev/hda7       /tmp            xfs     defaults        0       2
/dev/hda5       /usr            xfs     defaults        0       2
/dev/hda9       /var            xfs     defaults        0       2
/dev/hda8       none            swap    sw              0       0
/dev/hdb        /media/cdrom0   iso9660 ro,user,noauto  0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto  0       0

Output of lspci and lspci -n:
zeus:~# lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro13 3x AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT82 3x/A/C PIPC Bus Master IDE (rev 10)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Contr oller (rev 10)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10)
0000:00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo SuperACPI] (rev 30)
0000:00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 01)

zeus:~# lspci -n
0000:00:00.0 0600: 1106:0691 (rev c4)
0000:00:01.0 0604: 1106:8598
0000:00:07.0 0601: 1106:0686 (rev 22)
0000:00:07.1 0101: 1106:0571 (rev 10)
0000:00:07.2 0c03: 1106:3038 (rev 10)
0000:00:07.3 0c03: 1106:3038 (rev 10)
0000:00:07.4 0600: 1106:3057 (rev 30)
0000:00:0e.0 0200: 10ec:8139 (rev 10)
0000:00:0f.0 0200: 10ec:8029
0000:01:00.0 0300: 102b:0521 (rev 01)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:
I would like to configure network without dhcp. 
(Or I go to disconnect ethernet cable :) ?)

<Description of the install, in prose, and any thoughts, comments
      and ideas you had during the initial install.>
Very good! Debian way!

Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.

--- End Message ---
--- Begin Message --- 
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
  Installer.
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful


The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.

--- End Message ---
Reply to: