Your message dated Tue, 31 Aug 2010 11:17:07 +0000 with message-id <E1OqOpv-00061A-8p@franck.debian.org> and subject line Bug#594919: fixed in installation-report 2.42 has caused the Debian Bug report #594919, regarding Shouldn't use 'lspci -k' on kFreeBSD and Hurd to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 594919: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=594919 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: installation-reports: kFreeBSD install using daily-build 20100828-3
- From: Michael Dorrington <michael.dorrington@gmail.com>
- Date: Sun, 29 Aug 2010 23:44:21 +0100
- Message-id: <[🔎] 4C7AE2C5.6090704@gmail.com>
Package: installation-reports Severity: normal User: debian-bsd@lists.debian.org Usertags: kfreebsd X-Debbugs-CC: debian-bsd@lists.debian.org -- Package-specific info: Boot method: CD Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/20100828-3/kfreebsd-i386/iso-cd/debian-testing-kfreebsd-i386-netinst.iso Date: 2010-08-28 Machine: KVM 0.9.1 Partitions: <df -Tl will do; the raw partition table is preferred> Disk /dev/ad0: 0 MB, 0 bytes 255 heads, 63 sectors/track, 0 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b4138 Device Boot Start End Blocks Id System /dev/ad0p1 * 1 2497 20051968 a5 FreeBSD Partition 1 has different physical/logical endings: phys=(1023, 254, 63) logical=(2496, 122, 58) /dev/ad0p2 2497 2611 916481 5 Extended Partition 2 has different physical/logical beginnings (non-Linux?): phys=(1023, 254, 63) logical=(2496, 155, 26) Partition 2 has different physical/logical endings: phys=(1023, 254, 63) logical=(2610, 180, 2) /dev/ad0p5 2497 2611 916480 82 Linux swap / Solaris Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/ad0s1 ufs 19418446 3013244 14851728 17% / devfs devfs 1 1 0 100% /dev linprocfs linprocfs 4 4 0 100% /proc /sys sysfs 4 4 0 100% /sys fdescfs fdescfs 1 1 0 100% /dev/fd tmpfs tmpfs 1575252 4 1575248 1% /lib/init/rw Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [E] Comments/Problems: In the install menus the first character isn't highlighted when the item is selected. Graphical desktop install went through, although on boot gdm3 gives a black screen as reported in http://bugs.debian.org/592549 . Despite choosing UK keyboard on install still had to do 'dpkg-reconfigure kbdcontrol' and choose 'uk.iso.kbd' to get correct keymap on console. The '-k' of 'lspci -knn' doesn't work. I guess this is a Linux only option. lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02) 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000] 00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] [8086:7010] 00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03) 00:02.0 VGA compatible controller [0300]: Cirrus Logic GD 5446 [1013:00b8] 00:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 20) -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to submit@bugs.debian.org. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/kFreeBSD installer" DISTRIB_RELEASE="6.0 (squeeze) - installer build 20100827-10:20" X_INSTALLATION_MEDIUM=cdrom ============================================== Installer hardware-summary: ============================================== uname -a: GNU/kFreeBSD debian-kfreebsd-i386-3 8.1-1-486 #0 Tue Aug 17 22:35:34 CEST 2010 i686 GNU/Linux lspci -knn: Usage: lspci [<switches>] lspci -knn: lspci -knn: Basic display modes: lspci -knn: -mm Produce machine-readable output (single -m for an obsolete format) lspci -knn: -t Show bus tree lspci -knn: lspci -knn: Display options: lspci -knn: -v Be verbose (-vv for very verbose) lspci -knn: -x Show hex-dump of the standard part of the config space lspci -knn: -xxx Show hex-dump of the whole config space (dangerous; root only) lspci -knn: -xxxx Show hex-dump of the 4096-byte extended config space (root only) lspci -knn: -b Bus-centric view (addresses and IRQ's as seen by the bus) lspci -knn: -D Always show domain numbers lspci -knn: lspci -knn: Resolving of device ID's to names: lspci -knn: -n Show numeric ID's lspci -knn: -nn Show both textual and numeric ID's (names & numbers) lspci -knn: -q Query the PCI ID database for unknown ID's via DNS lspci -knn: -qq As above, but re-query locally cached entries lspci -knn: -Q Query the PCI ID database for all ID's via DNS lspci -knn: lspci -knn: Selection of devices: lspci -knn: -s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots lspci -knn: -d [<vendor>]:[<device>] Show only devices with specified ID's lspci -knn: lspci -knn: Other options: lspci -knn: -i <file> Use specified ID database instead of /usr/share/misc/pci.ids.gz lspci -knn: -M Enable `bus mapping' mode (dangerous; root only) lspci -knn: lspci -knn: PCI access options: lspci -knn: -A <method> Use the specified PCI access method (see `-A help' for a list) lspci -knn: -O <par>=<val> Set PCI access parameter (see `-O help' for a list) lspci -knn: -G Enable PCI access debugging lspci -knn: -F <file> Read PCI configuration dump from a given file usb-list: Error: directory /sys/bus does not exist; is sysfs mounted? kldstat: Id Refs Address Size Name kldstat: 1 5 0xc0400000 7e6000 kfreebsd.gz kldstat: 2 1 0xc6906000 10000 ext2fs.ko kldstat: 3 1 0xc727a000 4000 nullfs.ko df: Filesystem 1K-blocks Used Available Use% Mounted on df: /dev/md0 42479 29940 12539 70% / df: devfs 1 1 0 100% /dev df: devfs 1 1 0 100% /dev df: fdescfs 1 1 0 100% /dev/fd df: linprocfs 4 4 0 100% /proc df: /sys 4 4 0 100% /sys df: /dev/ad0s1 19418446 2942116 14922856 16% /target df: devfs 1 1 0 100% /dev df: linprocfs 4 4 0 100% /proc df: /sys 4 4 0 100% /sys df: devfs 1 1 0 100% /target/dev free: /usr/bin/report-hw: line 59: free: not found /proc/cmdline: BOOT_IMAGE=/kernel ro root=302 /proc/cpuinfo: processor : 0 /proc/cpuinfo: vendor_id : GenuineIntel /proc/cpuinfo: cpu family : 6 /proc/cpuinfo: model : 7 /proc/cpuinfo: model name : QEMU Virtual CPU version 0.9.1 /proc/cpuinfo: stepping : 3 /proc/cpuinfo: flags : fpu de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr xmm sse2 /proc/cpuinfo: cpu MHz : 1995.01 /proc/cpuinfo: bogomips : 1995.01 /proc/meminfo: total: used: free: shared: buffers: cached: /proc/meminfo: Mem: 750157824 124813312 625344512 1916928 0 28553216 /proc/meminfo: Swap: 938475520 0 938475520 /proc/meminfo: MemTotal: 732576 kB /proc/meminfo: MemFree: 610688 kB /proc/meminfo: MemShared: 1872 kB /proc/meminfo: Buffers: 0 kB /proc/meminfo: Cached: 27884 kB /proc/meminfo: SwapTotal: 916480 kB /proc/meminfo: SwapFree: 916480 kB -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: kfreebsd-i386 (i686) Kernel: kFreeBSD 8.1-1-686 Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dashAttachment: signature.asc
Description: OpenPGP digital signature
--- End Message ---
--- Begin Message ---
- To: 594919-close@bugs.debian.org
- Subject: Bug#594919: fixed in installation-report 2.42
- From: Aurelien Jarno <aurel32@debian.org>
- Date: Tue, 31 Aug 2010 11:17:07 +0000
- Message-id: <E1OqOpv-00061A-8p@franck.debian.org>
Source: installation-report Source-Version: 2.42 We believe that the bug you reported is fixed in the latest version of installation-report, which is due to be installed in the Debian FTP archive: installation-report_2.42.dsc to main/i/installation-report/installation-report_2.42.dsc installation-report_2.42.tar.gz to main/i/installation-report/installation-report_2.42.tar.gz installation-report_2.42_all.deb to main/i/installation-report/installation-report_2.42_all.deb save-logs_2.42_all.udeb to main/i/installation-report/save-logs_2.42_all.udeb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 594919@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Aurelien Jarno <aurel32@debian.org> (supplier of updated installation-report package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmaster@debian.org) -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Format: 1.8 Date: Tue, 31 Aug 2010 12:56:45 +0200 Source: installation-report Binary: save-logs installation-report Architecture: source all Version: 2.42 Distribution: unstable Urgency: low Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Changed-By: Aurelien Jarno <aurel32@debian.org> Description: installation-report - system installation report save-logs - save logs and configuration for debug purposes (udeb) Closes: 542002 594919 Changes: installation-report (2.42) unstable; urgency=low . [ Aurelien Jarno ] * hw-report: only pass -k to lscpi on Linux. Closes: bug#594919. * README.Debian: fix a typo. Closes: bug#542002. . [ Updated translations ] * Asturian (ast.po) by maacub * Bulgarian (bg.po) by Damyan Ivanov * Bosnian (bs.po) by Armin Beširović * Danish (da.po) by Jacob Sparre Andersen * Persian (fa.po) by Ebrahim Byagowi * Portuguese (Brazil) (pt_BR.po) by Felipe Augusto van de Wiel (faw) * Serbian (sr.po) by Karolina Kalic * Telugu (te.po) by Arjuna Rao Chavala Checksums-Sha1: 26dc251077f562e96fafaf6e315beb84e626f84e 911 installation-report_2.42.dsc d45263a4a41b5840258b9d27420d53fb7ef01bc0 84832 installation-report_2.42.tar.gz d568947c8f249bb0241e0eec0fb224c09380f1fe 51708 save-logs_2.42_all.udeb fc203e847fe33d446eb0fc8c036ea696d91f9a39 18544 installation-report_2.42_all.deb Checksums-Sha256: 7b168d5187ed395e9112fee5a0a92a3f4b1ed8b4ec0ed3e0523fc8d8eb377f75 911 installation-report_2.42.dsc f553e9a638cf69803cf94bf0848d4cbff67d7530265765a14ab8ac6463722c1e 84832 installation-report_2.42.tar.gz c35fbaa2f0b7b2d3bd615e289e1a2383069c5021c3380a03ee3b600b95ebff94 51708 save-logs_2.42_all.udeb 60e04a96ac1efe1923fcc984d6e50f0ff0b5d39531d50f55cd2c67012efa98db 18544 installation-report_2.42_all.deb Files: ab7e798877196809225315e44b84a9f2 911 debian-installer optional installation-report_2.42.dsc 638163b7a1eee3f6dc99754c43240327 84832 debian-installer optional installation-report_2.42.tar.gz 29273b546b01550374ac442b7295efac 51708 debian-installer standard save-logs_2.42_all.udeb 24bb173806b77f3b1b42d491537a8357 18544 misc optional installation-report_2.42_all.deb Package-Type: udeb -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) iD8DBQFMfOFAw3ao2vG823MRAql7AJ918ITuOSmDOq+RMBvw66jpMzn27gCffiG+ emAKgyy1AO83A/jXPS016T4= =vtpE -----END PGP SIGNATURE-----
--- End Message ---