Bug#594878: flash-kernel: please add mv78xx0 support
Package: flash-kernel
Version: 2.32
Severity: wishlist
Hello,
This is an attempt to add mv78xx0 target to `flash-kernel' package. Find patch attached.
Best regards,
diff -Naur flash-kernel-2.32/debian/changelog flash-kernel-2.32.mv78xx0//debian/changelog
--- flash-kernel-2.32/debian/changelog 2010-07-11 20:47:41.000000000 +0000
+++ flash-kernel-2.32.mv78xx0//debian/changelog 2010-08-30 10:07:12.000000000 +0000
@@ -1,3 +1,9 @@
+flash-kernel (2.33) unstable; urgency=low
+
+ * Add support for the Marvell mv78xx0 targets
+
+ -- <zumbi@debian.org> Mon, 30 Aug 2010 10:06:40 +0000
+
flash-kernel (2.32) unstable; urgency=low
[ Updated translations ]
diff -Naur flash-kernel-2.32/flash-kernel flash-kernel-2.32.mv78xx0//flash-kernel
--- flash-kernel-2.32/flash-kernel 2010-06-26 17:55:50.000000000 +0000
+++ flash-kernel-2.32.mv78xx0//flash-kernel 2010-08-30 10:26:17.000000000 +0000
@@ -93,6 +93,7 @@
"HP Media Vault mv2120") exit 0 ;;
"Linksys NSLU2") exit 0 ;;
"Marvell GuruPlug Reference Board") exit 0 ;;
+ "Marvell DB-78x00-BP Development Board") exit 0 ;;
"Marvell OpenRD Base Board") exit 0 ;;
"Marvell OpenRD Client Board") exit 0 ;;
"Marvell OpenRD Ultimate Board") exit 0 ;;
@@ -338,8 +339,11 @@
) > "$imtd" || error "failed."
echo "done." >&2
;;
- "Marvell GuruPlug Reference Board" | "Marvell OpenRD Base Board" | "Marvell OpenRD Client Board" | "Marvell OpenRD Ultimate Board" | "Marvell SheevaPlug Reference Board" | "Marvell eSATA SheevaPlug Reference Board")
- check_subarch "kirkwood"
+ "Marvell DB-78x00-BP Development Board" | "Marvell GuruPlug Reference Board" | "Marvell OpenRD Base Board" | "Marvell OpenRD Client Board" | "Marvell OpenRD Ultimate Board" | "Marvell SheevaPlug Reference Board" | "Marvell eSATA SheevaPlug Reference Board")
+ # Do not check subarch on Marvell DB-78x00 Board until supported by debian kernel
+ if [ x"$machine" != x"Marvell DB-78x00-BP Development Board" ]; then
+ check_subarch "kirkwood"
+ fi
tmp="$(tempfile)"
printf "Generating kernel u-boot image... " >&2
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 \
diff -Naur flash-kernel-2.32/README flash-kernel-2.32.mv78xx0//README
--- flash-kernel-2.32/README 2010-06-26 17:55:50.000000000 +0000
+++ flash-kernel-2.32.mv78xx0//README 2010-08-30 10:18:45.000000000 +0000
@@ -31,6 +31,7 @@
- HP Media Vault mv2120
- Intel SS4000-E
- Linksys NSLU2
+ - Marvell DB-78x00-BP Development Board
- Marvell OpenRD-Base
- Marvell OpenRD-Client
- Marvell OpenRD-Ultimate
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (700, 'unstable'), (600, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Reply to: