Some kFreeBSD port of Installation manual
Hello,
This is some beginning of kFreeBSD/Hurd ports of the Installation manual:
basically, it does the following.
- Add kfreebsd-i386, kfreebsd-amd64 and hurd-i386 archs (not
automatically enabled for now).
- Add any-i386, any-amd64, any-x86, kfreebsd-any and hurd-any pseudo-archs
- Add an arch_kernel variable turned into &arch-kernel; entity, which
can be used for all places where "Linux" appears but other kernel
names should be able to appear, I've done so in a few places (not
thorough).
- Add a "What is Debian GNU/kFreeBSD" part, "What is GNU/kFreeBSD" would
probably be a good idea too.
- Add the architectures on which kFreeBSD can run
- Tag one section which I know applies to Linux only (Board Devices
accessibility).
I.e. not so much, but should put the sgml grounds for the rest to come:
- Marking Linux-only sections (here debian-hurd people could help).
- Adding kFreeBSD information, hardware support and boot menu notably.
(I don't believe it's useful to add any information about Hurd at this
stage, since the current work on DDE should change things quite a
bit, and there's no need to add more work to translators)
What do people think about this?
Samuel
Index: build/entities/common.ent
===================================================================
--- build/entities/common.ent (révision 64519)
+++ build/entities/common.ent (copie de travail)
@@ -3,7 +3,7 @@
<!-- The *first* definition of an ENTITY wins. -->
<!-- proper (long) name to use for Debian -->
-<!ENTITY debian "Debian GNU/Linux">
+<!ENTITY debian "Debian GNU/&arch-kernel;">
<!ENTITY d-i "<classname>debian-installer</classname>">
@@ -17,7 +17,7 @@
<!-- proper nouns for architectures -->
<!ENTITY arch-title
- "<phrase arch='amd64'>AMD64</phrase><phrase arch='arm'>ARM</phrase><phrase arch='hppa'>PA-RISC</phrase><phrase arch='i386'>Intel x86</phrase><phrase arch='ia64'>IA-64</phrase><phrase arch='mips'>Mips</phrase><phrase arch='mipsel'>Mipsel</phrase><phrase arch='powerpc'>PowerPC</phrase><phrase arch='sparc'>SPARC</phrase><phrase arch='s390'>S/390</phrase>">
+ "<phrase arch='any-amd64'>AMD64</phrase><phrase arch='arm'>ARM</phrase><phrase arch='hppa'>PA-RISC</phrase><phrase arch='any-i386'>Intel x86</phrase><phrase arch='ia64'>IA-64</phrase><phrase arch='mips'>Mips</phrase><phrase arch='mipsel'>Mipsel</phrase><phrase arch='powerpc'>PowerPC</phrase><phrase arch='sparc'>SPARC</phrase><phrase arch='s390'>S/390</phrase>">
<!ENTITY kernelversion "2.6.32">
Index: build/arch-options/powerpc
===================================================================
--- build/arch-options/powerpc (révision 62894)
+++ build/arch-options/powerpc (copie de travail)
@@ -2,8 +2,9 @@
# the 'powerpc' architecture
# It is sourced by the build scripts
-archspec="powerpc;not-s390;not-x86"
+archspec="powerpc;not-s390;not-x86;linux-any"
arch_listname="powerpc"
+arch_kernel="Linux"
minimum_memory=32
minimum_memory_gtk=128
# These two options should be set if condition 'smp' is set below
Index: build/arch-options/armel
===================================================================
--- build/arch-options/armel (révision 62894)
+++ build/arch-options/armel (copie de travail)
@@ -6,8 +6,9 @@
# and also continue to use "arm" for arch-specific XML-files in order
# to minimize impact on translations.
-archspec="arm;not-x86;not-s390;not-powerpc"
+archspec="arm;not-x86;not-s390;not-powerpc;linux-any"
arch_listname="arm"
+arch_kernel="Linux"
minimum_memory=32
# These two options should be set if condition 'smp' is set below
smp_config_section="N/A"
Index: build/arch-options/ia64
===================================================================
--- build/arch-options/ia64 (révision 62894)
+++ build/arch-options/ia64 (copie de travail)
@@ -2,8 +2,9 @@
# the 'ia64' architecture
# It is sourced by the build scripts
-archspec="ia64;not-x86;not-s390;not-powerpc"
+archspec="ia64;not-x86;not-s390;not-powerpc;linux-any"
arch_listname="ia64"
+arch_kernel="Linux"
minimum_memory=32
# These two options should be set if condition 'smp' is set below
smp_config_section="General setup"
Index: build/arch-options/hppa
===================================================================
--- build/arch-options/hppa (révision 62894)
+++ build/arch-options/hppa (copie de travail)
@@ -2,8 +2,9 @@
# the 'hppa' architecture
# It is sourced by the build scripts
-archspec="hppa;not-x86;not-s390;not-powerpc"
+archspec="hppa;not-x86;not-s390;not-powerpc;linux-any"
arch_listname="hppa"
+arch_kernel="Linux"
minimum_memory=32
# These two options should be set if condition 'smp' is set below
smp_config_section="Processor type and features"
Index: build/arch-options/mips
===================================================================
--- build/arch-options/mips (révision 62894)
+++ build/arch-options/mips (copie de travail)
@@ -2,8 +2,9 @@
# the 'mips' architecture
# It is sourced by the build scripts
-archspec="mips;not-x86;not-s390;not-powerpc"
+archspec="mips;not-x86;not-s390;not-powerpc;linux-any"
arch_listname="mips"
+arch_kernel="Linux"
minimum_memory=32
# These two options should be set if condition 'smp' is set below
smp_config_section="N/A"
Index: build/arch-options/sparc
===================================================================
--- build/arch-options/sparc (révision 62894)
+++ build/arch-options/sparc (copie de travail)
@@ -2,8 +2,9 @@
# the 'sparc' architecture
# It is sourced by the build scripts
-archspec="sparc;not-x86;not-s390;not-powerpc"
+archspec="sparc;not-x86;not-s390;not-powerpc;linux-any"
arch_listname="sparc"
+arch_kernel="Linux"
minimum_memory=32
# These two options should be set if condition 'smp' is set below
smp_config_section="General setup"
Index: build/arch-options/i386
===================================================================
--- build/arch-options/i386 (révision 62894)
+++ build/arch-options/i386 (copie de travail)
@@ -2,8 +2,9 @@
# the 'i386' architecture
# It is sourced by the build scripts
-archspec="i386;x86;not-s390;not-powerpc"
+archspec="i386;any-i386;x86;any-x86;not-s390;not-powerpc;linux-any"
arch_listname="boot"
+arch_kernel="Linux"
minimum_memory=44
minimum_memory_gtk=96
# These two options should be set if condition 'smp' is set below
Index: build/arch-options/mipsel
===================================================================
--- build/arch-options/mipsel (révision 62894)
+++ build/arch-options/mipsel (copie de travail)
@@ -2,8 +2,9 @@
# the 'mipsel' architecture
# It is sourced by the build scripts
-archspec="mipsel;not-x86;not-s390;not-powerpc"
+archspec="mipsel;not-x86;not-s390;not-powerpc;linux-any"
arch_listname="mips"
+arch_kernel="Linux"
minimum_memory=32
# These two options should be set if condition 'smp' is set below
smp_config_section="N/A"
Index: build/arch-options/amd64
===================================================================
--- build/arch-options/amd64 (révision 62894)
+++ build/arch-options/amd64 (copie de travail)
@@ -2,8 +2,9 @@
# the 'amd64' architecture
# It is sourced by the build scripts
-archspec="amd64;x86;not-s390;not-powerpc"
+archspec="amd64;any-amd64;x86;any-x86;not-s390;not-powerpc;linux-any"
arch_listname="amd64"
+arch_kernel="Linux"
minimum_memory=56
minimum_memory_gtk=96
# These two options should be set if condition 'smp' is set below
Index: build/arch-options/s390
===================================================================
--- build/arch-options/s390 (révision 62894)
+++ build/arch-options/s390 (copie de travail)
@@ -2,8 +2,9 @@
# the 's390' architecture
# It is sourced by the build scripts
-archspec="s390;not-powerpc;not-x86"
+archspec="s390;not-powerpc;not-x86;linux-any"
arch_listname="s390"
+arch_kernel="Linux"
minimum_memory=20
# These two options should be set if condition 'smp' is set below
smp_config_section="Processor type and features"
Index: build/buildone.sh
===================================================================
--- build/buildone.sh (révision 60852)
+++ build/buildone.sh (copie de travail)
@@ -81,6 +81,7 @@
echo "<!-- arch- and lang-specific non-profilable entities -->" > $dynamic
echo "<!ENTITY langext \".${language}\">" >> $dynamic
echo "<!ENTITY architecture \"${arch}\">" >> $dynamic
+ echo "<!ENTITY arch-kernel \"${arch_kernel}\">" >> $dynamic
echo "<!ENTITY arch-listname \"${arch_listname}\">" >> $dynamic
echo "<!ENTITY altkernelversion \"${altkernelversion}\">" >> $dynamic
echo "<!ENTITY smp-config-section \"${smp_config_section}\">" >> $dynamic
Index: build/templates/docstruct.ent
===================================================================
--- build/templates/docstruct.ent (révision 62894)
+++ build/templates/docstruct.ent (copie de travail)
@@ -4,27 +4,31 @@
<!ENTITY preface.xml SYSTEM "##SRCPATH##/preface.xml">
<!ENTITY welcome.xml SYSTEM "##SRCPATH##/welcome/welcome.xml">
- <!ENTITY what-is-debian.xml SYSTEM "##SRCPATH##/welcome/what-is-debian.xml">
- <!ENTITY what-is-linux.xml SYSTEM "##SRCPATH##/welcome/what-is-linux.xml">
- <!ENTITY what-is-debian-linux.xml SYSTEM "##SRCPATH##/welcome/what-is-debian-linux.xml">
- <!ENTITY what-is-debian-hurd.xml SYSTEM "##SRCPATH##/welcome/what-is-debian-hurd.xml">
- <!ENTITY getting-newest-inst.xml SYSTEM "##SRCPATH##/welcome/getting-newest-inst.xml">
- <!ENTITY getting-newest-doc.xml SYSTEM "##SRCPATH##/welcome/getting-newest-doc.xml">
- <!ENTITY doc-organization.xml SYSTEM "##SRCPATH##/welcome/doc-organization.xml">
- <!ENTITY about-copyright.xml SYSTEM "##SRCPATH##/welcome/about-copyright.xml">
+ <!ENTITY what-is-debian.xml SYSTEM "##SRCPATH##/welcome/what-is-debian.xml">
+ <!ENTITY what-is-linux.xml SYSTEM "##SRCPATH##/welcome/what-is-linux.xml">
+ <!ENTITY what-is-debian-linux.xml SYSTEM "##SRCPATH##/welcome/what-is-debian-linux.xml">
+ <!ENTITY what-is-debian-kfreebsd.xml SYSTEM "##SRCPATH##/welcome/what-is-debian-kfreebsd.xml">
+ <!ENTITY what-is-debian-hurd.xml SYSTEM "##SRCPATH##/welcome/what-is-debian-hurd.xml">
+ <!ENTITY getting-newest-inst.xml SYSTEM "##SRCPATH##/welcome/getting-newest-inst.xml">
+ <!ENTITY getting-newest-doc.xml SYSTEM "##SRCPATH##/welcome/getting-newest-doc.xml">
+ <!ENTITY doc-organization.xml SYSTEM "##SRCPATH##/welcome/doc-organization.xml">
+ <!ENTITY about-copyright.xml SYSTEM "##SRCPATH##/welcome/about-copyright.xml">
<!ENTITY hardware.xml SYSTEM "##SRCPATH##/hardware/hardware.xml">
<!ENTITY hardware-supported.xml SYSTEM "##SRCPATH##/hardware/hardware-supported.xml">
- <!ENTITY supported-amd64.xml SYSTEM "##SRCPATH##/hardware/supported/amd64.xml">
- <!ENTITY supported-arm.xml SYSTEM "##SRCPATH##/hardware/supported/arm.xml">
- <!ENTITY supported-hppa.xml SYSTEM "##SRCPATH##/hardware/supported/hppa.xml">
- <!ENTITY supported-i386.xml SYSTEM "##SRCPATH##/hardware/supported/i386.xml">
- <!ENTITY supported-ia64.xml SYSTEM "##SRCPATH##/hardware/supported/ia64.xml">
- <!ENTITY supported-mips.xml SYSTEM "##SRCPATH##/hardware/supported/mips.xml">
- <!ENTITY supported-mipsel.xml SYSTEM "##SRCPATH##/hardware/supported/mipsel.xml">
- <!ENTITY supported-powerpc.xml SYSTEM "##SRCPATH##/hardware/supported/powerpc.xml">
- <!ENTITY supported-s390.xml SYSTEM "##SRCPATH##/hardware/supported/s390.xml">
- <!ENTITY supported-sparc.xml SYSTEM "##SRCPATH##/hardware/supported/sparc.xml">
+ <!ENTITY supported-amd64.xml SYSTEM "##SRCPATH##/hardware/supported/amd64.xml">
+ <!ENTITY supported-arm.xml SYSTEM "##SRCPATH##/hardware/supported/arm.xml">
+ <!ENTITY supported-hppa.xml SYSTEM "##SRCPATH##/hardware/supported/hppa.xml">
+ <!ENTITY supported-i386.xml SYSTEM "##SRCPATH##/hardware/supported/i386.xml">
+ <!ENTITY supported-hurd-i386.xml SYSTEM "##SRCPATH##/hardware/supported/hurd-i386.xml">
+ <!ENTITY supported-kfreebsd-i386.xml SYSTEM "##SRCPATH##/hardware/supported/kfreebsd-i386.xml">
+ <!ENTITY supported-kfreebsd-amd64.xml SYSTEM "##SRCPATH##/hardware/supported/kfreebsd-amd64.xml">
+ <!ENTITY supported-ia64.xml SYSTEM "##SRCPATH##/hardware/supported/ia64.xml">
+ <!ENTITY supported-mips.xml SYSTEM "##SRCPATH##/hardware/supported/mips.xml">
+ <!ENTITY supported-mipsel.xml SYSTEM "##SRCPATH##/hardware/supported/mipsel.xml">
+ <!ENTITY supported-powerpc.xml SYSTEM "##SRCPATH##/hardware/supported/powerpc.xml">
+ <!ENTITY supported-s390.xml SYSTEM "##SRCPATH##/hardware/supported/s390.xml">
+ <!ENTITY supported-sparc.xml SYSTEM "##SRCPATH##/hardware/supported/sparc.xml">
<!ENTITY network-cards.xml SYSTEM "##SRCPATH##/hardware/network-cards.xml">
<!ENTITY supported-peripherals.xml SYSTEM "##SRCPATH##/hardware/supported-peripherals.xml">
<!ENTITY accessibility-hardware.xml SYSTEM "##SRCPATH##/hardware/accessibility.xml">
Index: en/preface.xml
===================================================================
--- en/preface.xml (révision 64518)
+++ en/preface.xml (copie de travail)
@@ -6,7 +6,7 @@
<para>
We are delighted that you have decided to try Debian, and are
-sure that you will find that Debian's GNU/Linux distribution is
+sure that you will find that Debian's GNU/&arch-kernel; distribution is
unique. &debian; brings together high-quality free software
from around the world, integrating it into a coherent whole. We
believe that you will find that the result is truly more than the sum
Index: en/partitioning/sizing.xml
===================================================================
--- en/partitioning/sizing.xml (révision 64518)
+++ en/partitioning/sizing.xml (copie de travail)
@@ -6,7 +6,7 @@
<title>Deciding on Debian Partitions and Sizes</title>
<para>
-At a bare minimum, GNU/Linux needs one partition for itself. You can
+At a bare minimum, GNU/&arch-kernel; needs one partition for itself. You can
have a single partition containing the entire operating system,
applications, and your personal files. Most people feel that a
separate swap partition is also a necessity, although it's not
@@ -18,7 +18,7 @@
</para><para>
-Most people choose to give GNU/Linux more than the minimum number of
+Most people choose to give GNU/&arch-kernel; more than the minimum number of
partitions, however. There are two reasons you might want to break up
the file system into a number of smaller partitions. The first is for
safety. If something happens to corrupt the file system, generally
@@ -27,7 +27,7 @@
system. At a bare minimum, you should consider creating what is
commonly called a <quote>root partition</quote>. This contains the most essential
components of the system. If any other partitions get corrupted, you
-can still boot into GNU/Linux to fix the system. This can save you the
+can still boot into GNU/&arch-kernel; to fix the system. This can save you the
trouble of having to reinstall the system from scratch.
</para><para>
Index: en/welcome/what-is-debian-linux.xml
===================================================================
--- en/welcome/what-is-debian-linux.xml (révision 64518)
+++ en/welcome/what-is-debian-linux.xml (copie de travail)
@@ -2,7 +2,7 @@
<!-- $Id$ -->
<sect1 id="what-is-debian-linux">
- <title>What is &debian;?</title>
+ <title>What is Debian GNU/Linux?</title>
<para>
The combination of Debian's philosophy and methodology and the GNU
Index: en/welcome/welcome.xml
===================================================================
--- en/welcome/welcome.xml (révision 64518)
+++ en/welcome/welcome.xml (copie de travail)
@@ -15,6 +15,7 @@
&what-is-linux.xml;
&what-is-debian-linux.xml;
&what-is-debian-hurd.xml;
+&what-is-debian-kfreebsd.xml;
&getting-newest-inst.xml;
&getting-newest-doc.xml;
&doc-organization.xml;
Index: en/welcome/what-is-debian-kfreebsd.xml
===================================================================
--- en/welcome/what-is-debian-kfreebsd.xml (révision 64518)
+++ en/welcome/what-is-debian-kfreebsd.xml (copie de travail)
@@ -1,27 +1,22 @@
<!-- retain these comments for translator revision tracking -->
<!-- $Id$ -->
-<!-- conditionalised because the hurd port is not yet an official debian
-release -->
- <sect1 id="what-is-debian-hurd" condition="unofficial-build">
- <title>What is Debian GNU/Hurd?</title>
+ <sect1 id="what-is-debian-kfreebsd">
+ <title>What is Debian GNU/kFreeBSD?</title>
<para>
-Debian GNU/Hurd is a Debian GNU system that replaces the Linux
-monolithic kernel with the GNU Hurd — a set of servers running on
-top of the GNU Mach microkernel. The Hurd is still unfinished, and is
-unsuitable for day-to-day use, but work is continuing. The Hurd is
-currently only being developed for the i386 architecture, although
-ports to other architectures will be made once the system becomes more
-stable.
+Debian GNU/kFreeBSD is a Debian GNU system that replaces the Linux
+kernel with the kFreeBSD kernel. This port of Debian is currently
+only being developed for the i386 and amd64 architectures, although
+ports to other architectures is possible.
</para><para>
For more information, see the
-<ulink url="http://www.debian.org/ports/hurd/";>
-Debian GNU/Hurd ports page</ulink>
-and the <email>debian-hurd@lists.debian.org</email>
+<ulink url="http://www.debian.org/ports/kfreebsd-gnu/";>
+Debian GNU/kFreeBSD ports page</ulink>
+and the <email>debian-bsd@lists.debian.org</email>
mailing list.
</para>
Index: en/hardware/hardware-supported.xml
===================================================================
--- en/hardware/hardware-supported.xml (révision 64518)
+++ en/hardware/hardware-supported.xml (copie de travail)
@@ -26,7 +26,7 @@
<sect2><title>Supported Architectures</title>
<para>
-Debian &release; supports eleven major architectures and several
+Debian GNU/Linux &release; supports eleven major architectures and several
variations of each architecture known as <quote>flavors</quote>.
</para><para>
@@ -153,8 +153,36 @@
</para><para>
-This document covers installation for the
-<emphasis>&arch-title;</emphasis> architecture. If you are looking
+Debian GNU/kFreeBSD &release; supports two architectures.
+
+</para><para>
+
+<informaltable>
+<tgroup cols="2">
+<thead>
+<row>
+ <entry>Architecture</entry><entry>Debian Designation</entry>
+</row>
+</thead>
+
+<tbody>
+<row>
+ <entry>Intel x86-based</entry>
+ <entry>kfreebsd-i386</entry>
+</row>
+
+<row>
+ <entry>AMD64 & Intel EM64T</entry>
+ <entry>kfreebsd-amd64</entry>
+</row>
+
+</tbody></tgroup></informaltable>
+
+</para><para>
+
+This document covers installation for the <emphasis>&arch-title;</emphasis>
+architecture using the <emphasis>&arch-kernel;</emphasis> kernel.
+If you are looking
for information on any of the other Debian-supported architectures
take a look at the
<ulink url="http://www.debian.org/ports/";>Debian-Ports</ulink> pages.
@@ -179,7 +207,8 @@
encounter a few bugs. Use our
<ulink url="&url-bts;">Bug Tracking System</ulink> to report any
problems; make sure to mention the fact that the bug is on the
-&arch-title; platform. It can be necessary to use the
+&arch-title; platform using the <emphasis>&arch-kernel;</emphasis> kernel.
+It can be necessary to use the
<ulink url="&url-list-subscribe;">debian-&arch-listname; mailing list</ulink>
as well.
Index: en/boot-installer/accessibility.xml
===================================================================
--- en/boot-installer/accessibility.xml (révision 64518)
+++ en/boot-installer/accessibility.xml (copie de travail)
@@ -83,7 +83,7 @@
</para>
</sect2>
- <sect2><title>Board Devices</title>
+ <sect2 arch="linux-any"><title>Board Devices</title>
<para>
Some accessibility devices are actual boards that are plugged inside the
Reply to: