Bug#593492:
Sorry, I forgot to add the real problem, that occurs.
Of course, I can go on installing the system, if that warning message
appears and I don't think, that this was the problem at all.
After I created partitions, etc. the computer starts to format the
partitions.
After some minutes, I tried fdisk -l and the third device (/dev/sdc) did
not show up!
dmesg-output is added.
When I use badblocks for checking this HDD, the only messages I am
getting are errors (but I think this happens, because the device just
'disappeared').
When I tried this for the first time, I did not realize that /dev/sdc
was gone, so I just went on installing.
When I try to finish the installation, grub won't let me install
to /dev/md0, so I tried it on console using
~# grub
grub> root (hd0,0)
but it says:
"Filesystem type unknown, partition type 0xee"
In the meanwhile, I thought, I would have to use
parted /dev/sda set <partition_number> bios_grub on
to get grub to recognize the system, but I think I was wrong, so I
removed that option on the next installation-trial, but when I do
'fdisk -l', I get
"Warning, GPT detected on /dev/sda" (and /dev/sdb besides).
So my questions are:
Why does my third device disapper? Do you think, that it is broken?
Why can't I install grub?
How can I remove GPT from the HDDs again?
Sincerely,
Yours Mathias
--
Mathias Kub
E-Mail: git@makubi.at
03.918630] ata3.00: configured for UDMA/133 (device error ignored)
[ 2603.918657] ata3: EH complete
[ 2603.918746] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors (2000399 MB)
[ 2603.918783] sd 2:0:0:0: [sdc] Write Protect is off
[ 2603.918789] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2603.918850] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2603.919662] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2603.919668] ata3.00: irq_stat 0x40000001
[ 2603.919680] ata3.00: cmd c8/00:20:22:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
[ 2603.919683] res 61/04:20:22:00:00/85:00:00:00:00/e0 Emask 0x1 (device error)
[ 2603.919689] ata3.00: status: { DRDY DF ERR }
[ 2603.919693] ata3.00: error: { ABRT }
[ 2603.928309] ata3.00: configured for UDMA/133 (device error ignored)
[ 2603.928336] ata3: EH complete
[ 2603.928411] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors (2000399 MB)
[ 2603.928448] sd 2:0:0:0: [sdc] Write Protect is off
[ 2603.928454] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2603.928515] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2603.928611] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2603.928616] ata3.00: irq_stat 0x40000001
[ 2603.928628] ata3.00: cmd c8/00:20:22:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
[ 2603.928631] res 61/04:20:22:00:00/85:00:00:00:00/e0 Emask 0x1 (device error)
[ 2603.928637] ata3.00: status: { DRDY DF ERR }
[ 2603.928641] ata3.00: error: { ABRT }
[ 2603.937864] ata3.00: configured for UDMA/133 (device error ignored)
[ 2603.937893] ata3: EH complete
[ 2603.937977] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors (2000399 MB)
[ 2603.938014] sd 2:0:0:0: [sdc] Write Protect is off
[ 2603.938020] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2603.938080] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2603.938600] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2603.938606] ata3.00: irq_stat 0x40000001
[ 2603.938618] ata3.00: cmd c8/00:20:22:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
[ 2603.938621] res 61/04:20:22:00:00/85:00:00:00:00/e0 Emask 0x1 (device error)
[ 2603.938627] ata3.00: status: { DRDY DF ERR }
[ 2603.938631] ata3.00: error: { ABRT }
[ 2603.947866] ata3.00: configured for UDMA/133 (device error ignored)
[ 2603.947891] ata3: EH complete
[ 2603.947965] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors (2000399 MB)
[ 2603.948023] sd 2:0:0:0: [sdc] Write Protect is off
[ 2603.948029] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2603.948092] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2603.948624] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2603.948630] ata3.00: irq_stat 0x40000001
[ 2603.948642] ata3.00: cmd c8/00:20:22:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
[ 2603.948645] res 61/04:20:22:00:00/85:00:00:00:00/e0 Emask 0x1 (device error)
[ 2603.948651] ata3.00: status: { DRDY DF ERR }
[ 2603.948656] ata3.00: error: { ABRT }
[ 2603.957849] ata3.00: configured for UDMA/133 (device error ignored)
[ 2603.957875] ata3: EH complete
[ 2603.957947] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors (2000399 MB)
[ 2603.957984] sd 2:0:0:0: [sdc] Write Protect is off
[ 2603.957990] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2603.958051] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2603.958635] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2603.958640] ata3.00: irq_stat 0x40000001
[ 2603.958652] ata3.00: cmd c8/00:20:22:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
[ 2603.958655] res 61/04:20:22:00:00/85:00:00:00:00/e0 Emask 0x1 (device error)
[ 2603.958661] ata3.00: status: { DRDY DF ERR }
[ 2603.958665] ata3.00: error: { ABRT }
[ 2603.967855] ata3.00: configured for UDMA/133 (device error ignored)
[ 2603.967882] sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 2603.967890] sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor]
[ 2603.967898] Descriptor sense data with sense descriptors (in hex):
[ 2603.967902] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2603.967916] 00 00 00 22
[ 2603.967922] sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
[ 2603.967930] end_request: I/O error, dev sdc, sector 34
[ 2603.967935] __ratelimit: 1 messages suppressed
[ 2603.967941] raid1: sdc1: rescheduling sector 0
[ 2603.967957] ata3: EH complete
[ 2603.968056] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors (2000399 MB)
[ 2603.968094] sd 2:0:0:0: [sdc] Write Protect is off
[ 2603.968099] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2603.968160] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2603.969223] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2603.969229] ata3.00: irq_stat 0x40000001
[ 2603.969241] ata3.00: cmd c8/00:08:22:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 2603.969244] res 61/04:08:22:00:00/85:00:00:00:00/e0 Emask 0x1 (device error)
[ 2603.969250] ata3.00: status: { DRDY DF ERR }
[ 2603.969254] ata3.00: error: { ABRT }
[ 2603.978851] ata3.00: configured for UDMA/133 (device error ignored)
[ 2603.978892] ata3: EH complete
[ 2603.978966] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors (2000399 MB)
[ 2603.979003] sd 2:0:0:0: [sdc] Write Protect is off
[ 2603.979008] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2603.979083] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2603.979088] ata3.00: irq_stat 0x40000001
[ 2603.979099] ata3.00: cmd c8/00:08:22:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 2603.979102] res 61/04:08:22:00:00/85:00:00:00:00/e0 Emask 0x1 (device error)
[ 2603.979108] ata3.00: status: { DRDY DF ERR }
[ 2603.979112] ata3.00: error: { ABRT }
[ 2603.987911] ata3.00: configured for UDMA/133 (device error ignored)
[ 2603.987952] ata3: EH complete
[ 2603.988023] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2603.988089] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors (2000399 MB)
[ 2603.988124] sd 2:0:0:0: [sdc] Write Protect is off
[ 2603.988131] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2603.988191] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2603.988692] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2603.988697] ata3.00: irq_stat 0x40000001
[ 2603.988709] ata3.00: cmd c8/00:08:22:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 2603.988712] res 61/04:08:22:00:00/85:00:00:00:00/e0 Emask 0x1 (device error)
[ 2603.988718] ata3.00: status: { DRDY DF ERR }
[ 2603.988722] ata3.00: error: { ABRT }
[ 2603.997921] ata3.00: configured for UDMA/133 (device error ignored)
[ 2603.997946] ata3: EH complete
[ 2603.998038] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors (2000399 MB)
[ 2603.998075] sd 2:0:0:0: [sdc] Write Protect is off
[ 2603.998081] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2603.998142] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2603.998658] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2603.998663] ata3.00: irq_stat 0x40000001
[ 2603.998675] ata3.00: cmd c8/00:08:22:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 2603.998678] res 61/04:08:22:00:00/85:00:00:00:00/e0 Emask 0x1 (device error)
[ 2603.998683] ata3.00: status: { DRDY DF ERR }
[ 2603.998687] ata3.00: error: { ABRT }
[ 2604.007896] ata3.00: configured for UDMA/133 (device error ignored)
[ 2604.007923] ata3: EH complete
[ 2604.008259] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors (2000399 MB)
[ 2604.008305] sd 2:0:0:0: [sdc] Write Protect is off
[ 2604.008311] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2604.008373] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2604.008682] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2604.008688] ata3.00: irq_stat 0x40000001
[ 2604.008699] ata3.00: cmd c8/00:08:22:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 2604.008702] res 61/04:08:22:00:00/85:00:00:00:00/e0 Emask 0x1 (device error)
[ 2604.008708] ata3.00: status: { DRDY DF ERR }
[ 2604.008712] ata3.00: error: { ABRT }
[ 2604.017949] ata3.00: configured for UDMA/133 (device error ignored)
[ 2604.017974] ata3: EH complete
[ 2604.018047] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors (2000399 MB)
[ 2604.018084] sd 2:0:0:0: [sdc] Write Protect is off
[ 2604.018090] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2604.018151] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2604.018684] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2604.018690] ata3.00: irq_stat 0x40000001
[ 2604.018702] ata3.00: cmd c8/00:08:22:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 2604.018705] res 61/04:08:22:00:00/85:00:00:00:00/e0 Emask 0x1 (device error)
[ 2604.018711] ata3.00: status: { DRDY DF ERR }
[ 2604.018715] ata3.00: error: { ABRT }
[ 2604.027905] ata3.00: configured for UDMA/133 (device error ignored)
[ 2604.027933] sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 2604.027941] sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor]
[ 2604.027950] Descriptor sense data with sense descriptors (in hex):
[ 2604.027954] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2604.027967] 00 00 00 22
[ 2604.027973] sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
[ 2604.027981] end_request: I/O error, dev sdc, sector 34
[ 2604.028022] ata3: EH complete
[ 2604.028093] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors (2000399 MB)
[ 2604.028130] sd 2:0:0:0: [sdc] Write Protect is off
[ 2604.028135] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2604.028197] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2604.029337] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2604.029344] ata3.00: irq_stat 0x40000001
[ 2604.029356] ata3.00: cmd ca/00:08:22:00:00/00:00:00:00:00/e0 tag 0 dma 4096 out
[ 2604.029359] res 61/04:08:22:00:00/85:00:00:00:00/e0 Emask 0x1 (device error)
[ 2604.029365] ata3.00: status: { DRDY DF ERR }
[ 2604.029369] ata3.00: error: { ABRT }
[ 2604.038910] ata3.00: configured for UDMA/133 (device error ignored)
[ 2604.038940] ata3: EH complete
[ 2604.039028] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors (2000399 MB)
[ 2604.039065] sd 2:0:0:0: [sdc] Write Protect is off
[ 2604.039071] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2604.039112] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2604.039117] ata3.00: irq_stat 0x40000001
[ 2604.039128] ata3.00: cmd ca/00:08:22:00:00/00:00:00:00:00/e0 tag 0 dma 4096 out
[ 2604.039131] res 61/04:08:22:00:00/85:00:00:00:00/e0 Emask 0x1 (device error)
[ 2604.039137] ata3.00: status: { DRDY DF ERR }
[ 2604.039141] ata3.00: error: { ABRT }
[ 2604.047930] ata3.00: configured for UDMA/133 (device error ignored)
[ 2604.047957] ata3: EH complete
[ 2604.048312] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2604.048376] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors (2000399 MB)
[ 2604.048412] sd 2:0:0:0: [sdc] Write Protect is off
[ 2604.048418] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2604.048479] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2604.048716] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2604.048722] ata3.00: irq_stat 0x40000001
[ 2604.048733] ata3.00: cmd ca/00:08:22:00:00/00:00:00:00:00/e0 tag 0 dma 4096 out
[ 2604.048736] res 61/04:08:22:00:00/85:00:00:00:00/e0 Emask 0x1 (device error)
[ 2604.048742] ata3.00: status: { DRDY DF ERR }
[ 2604.048746] ata3.00: error: { ABRT }
[ 2604.058000] ata3.00: configured for UDMA/133 (device error ignored)
[ 2604.058024] ata3: EH complete
[ 2604.058097] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors (2000399 MB)
[ 2604.058134] sd 2:0:0:0: [sdc] Write Protect is off
[ 2604.058139] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2604.058201] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2604.058707] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2604.058713] ata3.00: irq_stat 0x40000001
[ 2604.058724] ata3.00: cmd ca/00:08:22:00:00/00:00:00:00:00/e0 tag 0 dma 4096 out
[ 2604.058727] res 61/04:08:22:00:00/85:00:00:00:00/e0 Emask 0x1 (device error)
[ 2604.058733] ata3.00: status: { DRDY DF ERR }
[ 2604.058737] ata3.00: error: { ABRT }
[ 2604.068191] ata3.00: configured for UDMA/133 (device error ignored)
[ 2604.068218] ata3: EH complete
[ 2604.068295] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors (2000399 MB)
[ 2604.068333] sd 2:0:0:0: [sdc] Write Protect is off
[ 2604.068338] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2604.068400] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2604.068734] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2604.068740] ata3.00: irq_stat 0x40000001
[ 2604.068751] ata3.00: cmd ca/00:08:22:00:00/00:00:00:00:00/e0 tag 0 dma 4096 out
[ 2604.068754] res 61/04:08:22:00:00/85:00:00:00:00/e0 Emask 0x1 (device error)
[ 2604.068760] ata3.00: status: { DRDY DF ERR }
[ 2604.068764] ata3.00: error: { ABRT }
[ 2604.077984] ata3.00: configured for UDMA/133 (device error ignored)
[ 2604.078009] ata3: EH complete
[ 2604.078094] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors (2000399 MB)
[ 2604.078131] sd 2:0:0:0: [sdc] Write Protect is off
[ 2604.078137] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2604.078199] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2604.078766] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2604.078771] ata3.00: irq_stat 0x40000001
[ 2604.078782] ata3.00: cmd ca/00:08:22:00:00/00:00:00:00:00/e0 tag 0 dma 4096 out
[ 2604.078785] res 61/04:08:22:00:00/85:00:00:00:00/e0 Emask 0x1 (device error)
[ 2604.078791] ata3.00: status: { DRDY DF ERR }
[ 2604.078795] ata3.00: error: { ABRT }
[ 2604.087987] ata3.00: configured for UDMA/133 (device error ignored)
[ 2604.088034] sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 2604.088043] sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor]
[ 2604.088051] Descriptor sense data with sense descriptors (in hex):
[ 2604.088055] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2604.088069] 00 00 00 22
[ 2604.088075] sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
[ 2604.088082] end_request: I/O error, dev sdc, sector 34
[ 2604.088098] ata3: EH complete
[ 2604.088123] raid1: Disk failure on sdc1, disabling device.
[ 2604.088126] raid1: Operation continuing on 2 devices.
[ 2604.096939] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors (2000399 MB)
[ 2604.096976] sd 2:0:0:0: [sdc] Write Protect is off
[ 2604.096982] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2604.118288] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2604.340716] RAID1 conf printout:
[ 2604.340723] --- wd:2 rd:3
[ 2604.340729] disk 0, wo:0, o:1, dev:sda1
[ 2604.340734] disk 1, wo:0, o:1, dev:sdb1
[ 2604.340738] disk 2, wo:1, o:0, dev:sdc1
[ 2604.340764] RAID1 conf printout:
[ 2604.340767] --- wd:2 rd:3
[ 2604.340771] disk 0, wo:0, o:1, dev:sda1
[ 2604.340775] disk 1, wo:0, o:1, dev:sdb1
Reply to: