Bug#545923: Tyan S7002
Package: installation-reports
Boot method: CD
Image version: debian-503-amd64-netinst.iso
Date: Aug 31 2009
Machine: Tyan S7002
Processor: see attached cpuinfo
Memory: see attached proc_meminfo
Partitions: see atached last_300lines_of_partman
Output of lspci -knn (or lspci -nn):
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [o]
Detect network card: [o]
Configure network: [o]
Detect CD: [o]
Load installer modules: [o]
Detect hard drives: [o]
Partition hard drives: [E]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
Possibly connected with bug#508408
This box has 2 hitachi drives - set up two raid partitions each - one for swap the rest for root.
Set the root partition to jfs and the other to swap finished with out much difficulty - but then:
The kernel was unable to re-read the partition table on /dev/md1 (Invalid argument). This means
Linux won't know anything about the modifications you made until you reboot. You should reboot
your computer before doing anything with /dev/md1.
Dropping down to the shell I see the raid building.. Waited for it to finish and restarted the
install, but problem persists.
I've attached information - let me know if more info is needed.
--------------------------------------------------------------------------------
Karl Schmidt EMail Karl@xtronics.com
Transtronics, Inc. WEB http://xtronics.com
3209 West 9th Street Ph (785) 841-3089
Lawrence, KS 66049 FAX (785) 841-0434
The best way to cheer yourself up
is to try to cheer somebody else up. -- Mark twain
--------------------------------------------------------------------------------
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 26
model name : Intel(R) Xeon(R) CPU E5504 @ 2.00GHz
stepping : 5
cpu MHz : 2000.069
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 sse4_2 popcnt lahf_lm
bogomips : 4003.41
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 26
model name : Intel(R) Xeon(R) CPU E5504 @ 2.00GHz
stepping : 5
cpu MHz : 2000.069
cache size : 4096 KB
physical id : 1
siblings : 4
core id : 0
cpu cores : 4
apicid : 16
initial apicid : 16
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 sse4_2 popcnt lahf_lm
bogomips : 4000.06
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 26
model name : Intel(R) Xeon(R) CPU E5504 @ 2.00GHz
stepping : 5
cpu MHz : 2000.069
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 sse4_2 popcnt lahf_lm
bogomips : 4000.05
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 26
model name : Intel(R) Xeon(R) CPU E5504 @ 2.00GHz
stepping : 5
cpu MHz : 2000.069
cache size : 4096 KB
physical id : 1
siblings : 4
core id : 1
cpu cores : 4
apicid : 18
initial apicid : 18
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 sse4_2 popcnt lahf_lm
bogomips : 4000.02
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 4
vendor_id : GenuineIntel
cpu family : 6
model : 26
model name : Intel(R) Xeon(R) CPU E5504 @ 2.00GHz
stepping : 5
cpu MHz : 2000.069
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 4
initial apicid : 4
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 sse4_2 popcnt lahf_lm
bogomips : 4000.05
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 5
vendor_id : GenuineIntel
cpu family : 6
model : 26
model name : Intel(R) Xeon(R) CPU E5504 @ 2.00GHz
stepping : 5
cpu MHz : 2000.069
cache size : 4096 KB
physical id : 1
siblings : 4
core id : 2
cpu cores : 4
apicid : 20
initial apicid : 20
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 sse4_2 popcnt lahf_lm
bogomips : 4000.10
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 6
vendor_id : GenuineIntel
cpu family : 6
model : 26
model name : Intel(R) Xeon(R) CPU E5504 @ 2.00GHz
stepping : 5
cpu MHz : 2000.069
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 6
initial apicid : 6
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 sse4_2 popcnt lahf_lm
bogomips : 4000.06
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 7
vendor_id : GenuineIntel
cpu family : 6
model : 26
model name : Intel(R) Xeon(R) CPU E5504 @ 2.00GHz
stepping : 5
cpu MHz : 2000.069
cache size : 4096 KB
physical id : 1
siblings : 4
core id : 3
cpu cores : 4
apicid : 22
initial apicid : 22
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 sse4_2 popcnt lahf_lm
bogomips : 4000.09
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 386
parted_server: Opening infifo
/lib/partman/check.d/10check_basicfilesystems: *******************************************************
/lib/partman/check.d/10check_basicfilesystems: IN: PARTITIONS =dev=md0
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 0-485102256127 485102256128 primary jfs /dev/md0
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 387
parted_server: Opening infifo
/lib/partman/check.d/10check_basicfilesystems: IN: PARTITIONS =dev=md1
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 0-15002763263 15002763264 primary linux-swap /dev/md1
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 388
parted_server: Opening infifo
/lib/partman/check.d/10check_basicfilesystems: IN: PARTITIONS =dev=sda
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 31744-2003554303 2003522560 primary fat32 /dev/sda1
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 389
parted_server: Opening infifo
/lib/partman/check.d/10check_basicfilesystems: IN: PARTITIONS =dev=sdf
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-15002910719 15002878464 primary linux-swap /dev/sdf1
parted_server: OUT: 2 15002910720-500105249279 485102338560 primary jfs /dev/sdf2
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 390
parted_server: Opening infifo
/lib/partman/check.d/10check_basicfilesystems: IN: PARTITIONS =dev=sdg
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-15002910719 15002878464 primary linux-swap /dev/sdg1
parted_server: OUT: 2 15002910720-500105249279 485102338560 primary jfs /dev/sdg2
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 391
parted_server: Opening infifo
/lib/partman/check.d/10check_swap: *******************************************************
/lib/partman/check.d/10check_swap: IN: PARTITIONS =dev=md0
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 0-485102256127 485102256128 primary jfs /dev/md0
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 392
parted_server: Opening infifo
/lib/partman/check.d/10check_swap: IN: PARTITIONS =dev=md1
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 0-15002763263 15002763264 primary linux-swap /dev/md1
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 393
parted_server: Opening infifo
/lib/partman/check.d/10check_swap: IN: PARTITIONS =dev=sda
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 31744-2003554303 2003522560 primary fat32 /dev/sda1
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 394
parted_server: Opening infifo
/lib/partman/check.d/10check_swap: IN: PARTITIONS =dev=sdf
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-15002910719 15002878464 primary linux-swap /dev/sdf1
parted_server: OUT: 2 15002910720-500105249279 485102338560 primary jfs /dev/sdf2
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 395
parted_server: Opening infifo
/lib/partman/check.d/10check_swap: IN: PARTITIONS =dev=sdg
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-15002910719 15002878464 primary linux-swap /dev/sdg1
parted_server: OUT: 2 15002910720-500105249279 485102338560 primary jfs /dev/sdg2
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 396
parted_server: Opening infifo
/bin/partman: IN: IS_CHANGED =dev=md0
parted_server: Read command: IS_CHANGED
parted_server: command_is_changed(=dev=md0)
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: no
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 397
parted_server: Opening infifo
/bin/partman: IN: PARTITIONS =dev=md0
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 0-485102256127 485102256128 primary jfs /dev/md0
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 398
parted_server: Opening infifo
/bin/partman: IN: IS_CHANGED =dev=md1
parted_server: Read command: IS_CHANGED
parted_server: command_is_changed(=dev=md1)
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: yes
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 399
parted_server: Opening infifo
/bin/partman: IN: PARTITIONS =dev=md1
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 0-15002763263 15002763264 primary linux-swap /dev/md1
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 400
parted_server: Opening infifo
/bin/partman: IN: IS_CHANGED =dev=sda
parted_server: Read command: IS_CHANGED
parted_server: command_is_changed(=dev=sda)
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: no
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 401
parted_server: Opening infifo
/bin/partman: IN: PARTITIONS =dev=sda
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 31744-2003554303 2003522560 primary fat32 /dev/sda1
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 402
parted_server: Opening infifo
/bin/partman: IN: IS_CHANGED =dev=sdf
parted_server: Read command: IS_CHANGED
parted_server: command_is_changed(=dev=sdf)
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: no
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 403
parted_server: Opening infifo
/bin/partman: IN: PARTITIONS =dev=sdf
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-15002910719 15002878464 primary linux-swap /dev/sdf1
parted_server: OUT: 2 15002910720-500105249279 485102338560 primary jfs /dev/sdf2
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 404
parted_server: Opening infifo
/bin/partman: IN: IS_CHANGED =dev=sdg
parted_server: Read command: IS_CHANGED
parted_server: command_is_changed(=dev=sdg)
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: no
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 405
parted_server: Opening infifo
/bin/partman: IN: PARTITIONS =dev=sdg
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: 1 32256-15002910719 15002878464 primary linux-swap /dev/sdg1
parted_server: OUT: 2 15002910720-500105249279 485102338560 primary jfs /dev/sdg2
parted_server: Partitions printed
parted_server: OUT:
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 406
parted_server: Opening infifo
/lib/partman/commit.d/30parted: *******************************************************
/lib/partman/commit.d/30parted: IN: IS_CHANGED =dev=md0
parted_server: Read command: IS_CHANGED
parted_server: command_is_changed(=dev=md0)
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: no
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 407
parted_server: Opening infifo
/lib/partman/commit.d/30parted: IN: IS_CHANGED =dev=md1
parted_server: Read command: IS_CHANGED
parted_server: command_is_changed(=dev=md1)
parted_server: Opening outfifo
parted_server: OUT: OK
parted_server: OUT: yes
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 408
parted_server: Opening infifo
/lib/partman/commit.d/30parted: IN: COMMIT =dev=md1
parted_server: Read command: COMMIT
parted_server: command_commit()
parted_server: Opening outfifo
parted_server: OUT: Warning
parted_server: OUT: The kernel was unable to re-read the partition table on /dev/md1 (Invalid argument). This means Linux won't know anything about the modifications you made until you reboot. You should reboot your computer before doing anything with /dev/md1.
parted_server: OUT:
parted_server: OUT: Ignore
parted_server: OUT:
/lib/partman/commit.d/30parted: error_handler: exception with type Warning
/lib/partman/commit.d/30parted: error_handler: reading message
/lib/partman/commit.d/30parted: paragraph: The kernel was unable to re-read the partition table on /dev/md1 (Invalid argument). This means Linux won't know anything about the modifications you made until you reboot. You should reboot your computer before doing anything with /dev/md1.
/lib/partman/commit.d/30parted: error_handler: reading options
/lib/partman/commit.d/30parted: option: Ignore
00:00.0 Host bridge [0600]: Intel Corporation QuickPath Architecture I/O Hub to ESI Port [8086:3403] (rev 13)
00:01.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13)
Kernel driver in use: pcieport-driver
00:03.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13)
Kernel driver in use: pcieport-driver
00:07.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13)
Kernel driver in use: pcieport-driver
00:08.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 8 [8086:340f] (rev 13)
Kernel driver in use: pcieport-driver
00:09.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 9 [8086:3410] (rev 13)
Kernel driver in use: pcieport-driver
00:0a.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 10 [8086:3411] (rev 13)
Kernel driver in use: pcieport-driver
00:10.0 PIC [0800]: Intel Corporation QuickPath Interconnect Physical and Link Layer Registers Port 0 [8086:3425] (rev 13)
00:10.1 PIC [0800]: Intel Corporation QuickPath Interconnect Routing and Protocol Layer Registers Port 0 [8086:3426] (rev 13)
00:11.0 PIC [0800]: Intel Corporation QuickPath Interconnect Physical and Link Layer Registers Port 1 [8086:3427] (rev 13)
00:11.1 PIC [0800]: Intel Corporation QuickPath Interconnect Routing and Protocol Layer Registers Port 1 [8086:3428] (rev 13)
00:13.0 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub I/OxAPIC Interrupt Controller [8086:342d] (rev 13)
00:14.0 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub System Management Registers [8086:342e] (rev 13)
00:14.1 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13)
00:14.2 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub Control Status and RAS Registers [8086:3423] (rev 13)
00:14.3 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub Throttle Registers [8086:3438] (rev 13)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c]
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1 [8086:3a40]
Kernel driver in use: pcieport-driver
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 5 [8086:3a48]
Kernel driver in use: pcieport-driver
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 6 [8086:3a4a]
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a]
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
00:1f.2 SATA controller [0106]: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller [8086:3a22]
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
01:00.0 VGA compatible controller [0300]: ASPEED Technology, Inc. AST2000 [1a03:2000] (rev 10)
02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
Kernel driver in use: e1000e
Kernel modules: e1000e
03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
Kernel driver in use: e1000e
Kernel modules: e1000e
08:00.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:95cc]
Personalities : [raid1]
md0 : active raid1 sdg2[0] sdf2[1]
473732672 blocks [2/2] [UU]
[=======>.............] resync = 39.7% (188449600/473732672) finish=54.8min speed=86675K/sec
md1 : active raid1 sdg1[0] sdf1[1]
14651136 blocks [2/2] [UU]
unused devices: <none>
MemTotal: 3088612 kB
MemFree: 2973312 kB
Buffers: 56 kB
Cached: 56692 kB
SwapCached: 0 kB
Active: 26672 kB
Inactive: 34228 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 4216 kB
Mapped: 2568 kB
Slab: 17248 kB
SReclaimable: 5720 kB
SUnreclaim: 11528 kB
PageTables: 596 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 1544304 kB
Committed_AS: 8792 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 285240 kB
VmallocChunk: 34359452787 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
Reply to: