Bug#517859: Wrong kernel installed at VIA C3
Package: installation-reports
Boot method: CD
Image version: Self-made boot CD with Lenny Debian Installer 5.0.0
Date: 2009-03-01
Machine: Self-made Desktop PC
Processor: VIA C3 Nehemia 667MHz
Memory: 512MB
Partitions: <df -Tl will do; the raw partition table is preferred>
> Dateisystem Typ 1K‐Blöcke Benutzt Verfügbar Ben% Eingehängt auf
> /dev/hda1 ext3 2885780 636284 2102908 24% / tmpfs tmpfs 250108 0
> 250108 0% /lib/init/rw udev tmpfs 10240 68 10172 1% /dev tmpfs tmpfs
> 250108 0 250108 0% /dev/shm /dev/hda5 xfs 152302048 35293404 117008644
> 24% /storage
Output of lspci -knn:
> 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8623 [Apollo
> CLE266] [1106:3123] Kernel driver in use: agpgart-via Kernel modules:
> via-agp 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8633
> [Apollo Pro266 AGP] [1106:b091] Kernel modules: shpchp 00:10.0 USB
> Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller [1106:3038] (rev 80) Kernel driver in use: uhci_hcd Kernel
> modules: uhci-hcd 00:10.1 USB Controller [0c03]: VIA Technologies,
> Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) Kernel
> driver in use: uhci_hcd Kernel modules: uhci-hcd 00:10.2 USB
> Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller [1106:3038] (rev 80) Kernel driver in use: uhci_hcd Kernel
> modules: uhci-hcd 00:10.3 USB Controller [0c03]: VIA Technologies,
> Inc. USB 2.0 [1106:3104] (rev 82) Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd 00:11.0 ISA bridge [0601]: VIA Technologies,
> Inc. VT8235 ISA Bridge [1106:3177] Kernel modules: via-ircc,
> i2c-viapro 00:11.1 IDE interface [0101]: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571]
> (rev 06) Kernel driver in use: VIA_IDE Kernel modules: via82cxxx
> 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102
> [Rhine-II] [1106:3065] (rev 74) Kernel driver in use: via-rhine Kernel
> modules: via-rhine 01:00.0 VGA compatible controller [0300]: VIA
> Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock
> graphics [1106:3122] (rev 03) Kernel modules: vt8623fb
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [E]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
The used Processor is a VIA C3 Nehemia Processor with 667MHz.
Debian 4.0 "etch" has installed the 686 kernel.
With Debian 5.0.0 "lenny", there is the 486 kernel installed.
Because, this is only a file server, the 486 kernel works fine.
There are no performance differences between the 486 kernel or the 686 kernel.
>From my side, the bug report can be closed.
This is only for information.
Regards
Bernhard
Reply to: