[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#514546: marked as done (installation-report)

Your message dated Mon, 9 Feb 2009 07:26:28 +0100
with message-id <20090209062627.GC7904@mykerinos.kheops.frmug.org>
and subject line Re: Bug#514546: installation-report
has caused the Debian Bug report #514546,
regarding installation-report
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
514546: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514546
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

Boot method: Network (PXE)
Image version: Lenny RC2
http://ftp.nl.debian.org/debian/dists/testing/main/installer-i386/current/images/netboot/netboot.tar.gz
Date: 2009-02-05

Machine: Fit-PC 1.0
http://www.fit-pc.com/new/fit-pc-1-0-specifications.html
Processor: Geode LX800 (x86 compatible)
Memory: 256MB
Partitions:
Disk /dev/hda: 60.0 GB, 60011642880 bytes
255 heads, 63 sectors/track, 7296 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1        7210    57914293+  83  Linux
/dev/hda2            7211        7296      690795    5  Extended
/dev/hda5            7211        7296      690763+  82  Linux swap / Solaris

Output of lspci -knn (or lspci -nn):
00:01.0 Host bridge [0600]: Advanced Micro Devices [AMD] CS5536 [Geode
companion] Host Bridge [1022:2080] (rev 33)
00:01.1 VGA compatible controller [0300]: Advanced Micro Devices [AMD]
Geode LX Video [1022:2081]
00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices
[AMD] Geode LX AES Security Block [1022:2082]
        Kernel driver in use: Geode LX AES
        Kernel modules: geode-rng, geode-aes
00:0d.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
        Kernel driver in use: 8139too
        Kernel modules: 8139too, 8139cp
00:0e.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
        Kernel driver in use: 8139too
        Kernel modules: 8139too, 8139cp
00:0f.0 ISA bridge [0601]: Advanced Micro Devices [AMD] CS5536 [Geode
companion] ISA [1022:2090] (rev 03)
        Kernel modules: cs5535_gpio
00:0f.2 IDE interface [0101]: Advanced Micro Devices [AMD] CS5536
[Geode companion] IDE [1022:209a] (rev 01)
        Kernel driver in use: AMD_IDE
        Kernel modules: amd74xx
00:0f.3 Multimedia audio controller [0401]: Advanced Micro Devices
[AMD] CS5536 [Geode companion] Audio [1022:2093] (rev 01)
        Kernel driver in use: cs5535audio
        Kernel modules: snd-cs5535audio
00:0f.4 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536
[Geode companion] OHC [1022:2094] (rev 02)
        Kernel driver in use: ohci_hcd
        Kernel modules: ohci-hcd
00:0f.5 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536
[Geode companion] EHC [1022:2095] (rev 02)
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [ ]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [ ]
Install boot loader:    [O]
Overall install:        [O]

Comments/Problems:
 Although the installer claimed to put the active ethernet device
first (when asking me to choose a device), it actually put the
inactive port (eth0) first. I believe both ports are controlled by the
same hardware device, so this isn't particularly unexpected.

Other than that, the install went well. I quite enjoyed the 'netboot'
install. My previous installs were 'floppy', which isn't nearly as
much fun.

--- End Message ---
--- Begin Message --- 
Quoting Peter Harris (git@peter.is-a-geek.org):

> Comments/Problems:
>  Although the installer claimed to put the active ethernet device
> first (when asking me to choose a device), it actually put the
> inactive port (eth0) first. I believe both ports are controlled by the
> same hardware device, so this isn't particularly unexpected.
> 
> Other than that, the install went well. I quite enjoyed the 'netboot'
> install. My previous installs were 'floppy', which isn't nearly as
> much fun.


Given that your installation was a complete success, I do as
usual with reports for successful installations: I close the bug..:-)

This does not of course mean you weren't right to report. Knowing the
installations are correct is important for the d-i team.

Many thanks for your time testing the Debian Installer and reporting
your results. Have fun with your new Debian system!

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: