Package: installation-reports
Boot method: <How did you boot the installer? CD? floppy? network?>
booted installer from hard disk using hd-media/initrd.gz, hd-media/vmlinuz
Image version: <Full URL to image you downloaded is best>
debian-502a-i386-DVD-1.iso debian-502a-i386-DVD-4.iso
debian-502a-i386-DVD-2.iso debian-502a-i386-DVD-5.iso
debian-502a-i386-DVD-3.iso debian-update-5.0.2-i386-DVD-1.iso
Date: <Date and time of the install>
Sept 12 2009 6pm.
Machine: <Description of machine (eg, IBM Thinkpad R32)>
desktop Biostar MCP6P M2+
Processor: DUAL CORE AMD
Memory: 2GIG
Partitions: <df -Tl will do; the raw partition table is preferred>
This was produce using an open suse system using same hardware,
can not do under booted system as it will not boot.
major minor #blocks name
8 0 312571224 sda
8 1 1 sda1
8 5 104359 sda5
8 6 104391 sda6
8 7 9414058 sda7
8 8 104856223 sda8
8 9 104856223 sda9
8 10 93233196 sda10
8 16 71687369 sdb
8 17 48163 sdb1
8 18 1052257 sdb2
8 19 60123262 sdb3
8 20 10458315 sdb4
Output of lspci -knn (or lspci -nn):
This was produce using an open suse system using same hardware,
can not do under booted system as it will not boot.
00:00.0 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03ea] (rev a1)
00:01.0 ISA bridge [0601]: nVidia Corporation MCP61 LPC Bridge [10de:03e0] (rev a2)
00:01.1 SMBus [0c05]: nVidia Corporation MCP61 SMBus [10de:03eb] (rev a2)
00:01.2 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03f5] (rev a2)
00:02.0 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f1] (rev a3)
00:02.1 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f2] (rev a3)
00:04.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI bridge [10de:03f3] (rev a1)
00:05.0 Audio device [0403]: nVidia Corporation MCP61 High Definition Audio [10de:03f0] (rev a2)
00:06.0 IDE interface [0101]: nVidia Corporation MCP61 IDE [10de:03ec] (rev a2)
00:07.0 Bridge [0680]: nVidia Corporation MCP61 Ethernet [10de:03ef] (rev a2)
00:08.0 IDE interface [0101]: nVidia Corporation MCP61 SATA Controller [10de:03f6] (rev a2)
00:08.1 IDE interface [0101]: nVidia Corporation MCP61 SATA Controller [10de:03f6] (rev a2)
00:09.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e8] (rev a2)
00:0b.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2)
00:0c.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2)
00:0d.0 VGA compatible controller [0300]: nVidia Corporation GeForce 6150SE nForce 430 [10de:03d0] (rev a2)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
01:06.0 SCSI storage controller [0100]: Adaptec AIC-7892A U160/m [9005:0080] (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [x ]
Detect network card: [x ]
Configure network: [x ]
Detect CD: [ ] used iso-scan instead
Load installer modules: [x ]
Detect hard drives: [x ]
Partition hard drives: [x ]
Install base system: [x ]
Clock/timezone setup: [x ]
User/password setup: [x ]
Install tasks: [x ]
Install boot loader: [x ]
Overall install: [x ]
Comments/Problems:
Booted installation process from hard disk.
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
Resulting system will not boot!
"ACPI:Expecting a [Reference] package element, found type 0
was the last thing to display on console before hang.
Tried adding acpi=off to boot parameters.
This resulted in hang with complaint about drivers fan.ko, processor.ko and thermal.ko
not existing. Still hangs.
This smalt entry describes the hardware. It was made with opensuse
on the same hardware, since the installed debian system will not boot.
http://www.smolts.org/show?uuid=pub_172fb22b-274c-4829-876f-d5da9c019622
Installed system
In the bug report, describe what the problem is, including the last visible kernel messages in the event of a kernel hang. Describe the steps that you did which brought the system into the problem state.
--
Paul Elliott 1(512)837-1096
pelliott@BlackPatchPanel.com PMB 181, 11900 Metric Blvd Suite J
http://www.free.blackpatchpanel.com/pme/ Austin TX 78758-3117
Attachment:
pgpnELCPq_E24.pgp
Description: PGP signature