Bug#527610: installation-reports
Package: installation-reports
Boot method: small-CD netinst
Image version: http://cdimage.debian.org/debian-cd/5.0.1/i386/iso-cd/debian-501-i386-netinst.iso
Date: Fri May 8 18:08:54 JST 2009
Machine: Hitachi PC-7NH04
Processor: Pentium II (260 MHz ?)
Memory: (256+32) MB
Partitions:
debian81:/home/hideo# df -Tl
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/hda1 ext3 3707984 3444412 75212 98% /
tmpfs tmpfs 144384 0 144384 0% /lib/init/rw
udev tmpfs 10240 80 10160 1% /dev
tmpfs tmpfs 144384 0 144384 0% /dev/shm
Output of lspci -nn and lspci -vnn:
debian81:/home/hideo# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) [8086:7192] (rev 02)
00:02.0 VGA compatible controller [0300]: Chips and Technologies F65555 HiQVPro [102c:00e5] (rev c6)
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01)
00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01)
00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02)
00:0a.0 CardBus bridge [0607]: Texas Instruments PCI1220 [104c:ac17] (rev 02)
00:0a.1 CardBus bridge [0607]: Texas Instruments PCI1220 [104c:ac17] (rev 02)
00:0b.0 Ethernet controller [0200]: Digital Equipment Corporation DECchip 21142/43 [1011:0019] (rev 41)
00:0c.0 Multimedia audio controller [0401]: ESS Technology ES1978 Maestro 2E [125d:1978]
debian81:/home/hideo# lspci -vnn
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) [8086:7192] (rev 02)
Flags: bus master, medium devsel, latency 64
Memory at <unassigned> (32-bit, prefetchable)
00:02.0 VGA compatible controller [0300]: Chips and Technologies F65555 HiQVPro [102c:00e5] (rev c6) (prog-if 00 [VGA controller])
Subsystem: Chips and Technologies F65555 HiQVPro [102c:00e5]
Flags: stepping, medium devsel
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at 30000000 [disabled] [size=256K]
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
Flags: bus master, medium devsel, latency 0
00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [Master])
Flags: bus master, medium devsel, latency 64
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
I/O ports at fcf0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) (prog-if 00 [UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at fcc0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02)
Flags: medium devsel, IRQ 9
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:0a.0 CardBus bridge [0607]: Texas Instruments PCI1220 [104c:ac17] (rev 02)
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 30080000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 24000000-27fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:0a.1 CardBus bridge [0607]: Texas Instruments PCI1220 [104c:ac17] (rev 02)
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 30081000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=05, subordinate=08, sec-latency=176
Memory window 0: 28000000-2bfff000 (prefetchable)
Memory window 1: 2c000000-2ffff000
I/O window 0: 00001800-000018ff
I/O window 1: 00001c00-00001cff
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:0b.0 Ethernet controller [0200]: Digital Equipment Corporation DECchip 21142/43 [1011:0019] (rev 41)
Subsystem: Hitachi, Ltd Device [1054:0104]
Flags: bus master, medium devsel, latency 165, IRQ 11
I/O ports at fc00 [size=128]
Memory at fedffc00 (32-bit, non-prefetchable) [size=1K]
[virtual] Expansion ROM at 30040000 [disabled] [size=256K]
Capabilities: [dc] Power Management version 1
Kernel driver in use: tulip
Kernel modules: tulip
00:0c.0 Multimedia audio controller [0401]: ESS Technology ES1978 Maestro 2E [125d:1978]
Subsystem: ESS Technology ES1978 Maestro 2E [125d:1978]
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at f800 [size=256]
Capabilities: [c0] Power Management version 2
Kernel driver in use: ES1968 (ESS Maestro)
Kernel modules: snd-es1968, radio-maestro
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O ]
Detect network card: [O ]
Configure network: [O ]
Detect CD: [O ]
Load installer modules: [O ]
Detect hard drives: [O ]
Partition hard drives: [O ]
Install base system: [O ]
Clock/timezone setup: [O ]
User/password setup: [O ]
Install tasks: [O ]
Install boot loader: [O ]
Overall install: [E ]
Comments/Problems:
I appreciate your job. Excellent!
Resolved Problems:
1. Detection vga resolution of X11
Initially, at Xorg.0.log
(II) CHIPS(0): Configured Monitor: Using hsync range of 31.50-37.90 kHz
(II) CHIPS(0): Configured Monitor: Using vrefresh range of 50.00-70.00 Hz
**** Where do the above values come from?
# Configuration file for svgalib. Default location is /etc/vga.
# Typical Horizontal sync ranges
# (Consult your monitor manual for Vertical sync ranges)
#
HorizSync 31.5 35.5
VertRefresh 50 90
**** My solution method is the following.
# xorg.conf (X.Org X Window System server configuration file)
#
#
Section "Monitor"
Identifier "Configured Monitor"
HorizSync 30.0 - 75.0
VertRefresh 50.0 - 86.0
Option "dpms"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection
===================================
Residual Problems: (I need your help.)
REBOOT is always fail.
The "shutdown" command is always success but the Power of PC is not turned OFF.
ACPI does not work.?
debian81:/etc/X11# acpid -d
acpid: can't open /proc/acpi/event: No such file or directory
debian81:/etc/X11# less /var/log/dmesg
[ 0.000000] ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080321]
[ 0.132008] ACPI: Core revision 20080321
[ 0.132008] ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20080321]
[ 0.132088] ACPI: Unable to load the System Description Tables
[ 0.132403] weird, boot CPU (#0) not listedby the BIOS.
[ 0.132425] SMP motherboard not detected.
[ 0.132444] Local APIC not detected. Using dummy APIC emulation.
[ 0.132460] SMP disabled
[ 0.132931] Brought up 1 CPUs
[ 0.132955] Total of 1 processors activated (536.13 BogoMIPS).
[ 0.133008] CPU0 attaching sched-domain:
[ 0.133029] domain 0: span 0
[ 0.133047] groups: 0
[ 0.134690] net_namespace: 660 bytes
[ 0.134750] Booting paravirtualized kernel on bare hardware
[ 0.136830] NET: Registered protocol family 16
[ 0.155640] PCI: PCI BIOS revision 2.10 entry at 0xfd9e4, last bus=0
[ 0.155666] PCI: Using configuration type 1 for base access
[ 0.155759] Setting up standard PCI resources
[ 0.166465] ACPI: Interpreter disabled.
[ 0.166494] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.166838] pnp: PnP ACPI: disabled
[ 0.166866] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.166961] PnPBIOS: Found PnP BIOS installation structure at 0xc00f6150
Please let me know how to resolve.
Thank you.
Reply to: