Re: Serious SCSI problem on Lenny networkinstall image
Otavio Salvador wrote:
"letstry@home.nl" <letstry@home.nl> writes:
[...]
Before you guys go ask the whole standard "chain" of questions about
my SCSI setup, it might be nice to say that a debootstrap install of
Debian 5 (via Ubuntu livecd) + apt-get update/upgrade produced a
running system on both machines, without problems.
So the problem might be fixed there.
[...]
An interesting question about it is if you used regular Lenny kernel at
installed system and if it worked well or not.
Hi Otavia,
It presents itself as Debian GNU/Linux 5.0, so that must be right ;-)
And it runs OK, but I haven't put any load on it yet.
I selected the 686 kernel as I thought it would be the best match for my hardware.
APT sourcelist for installation
-------------------------------
server01:~# cat /etc/apt/sources.list
deb http://ftp.nl.debian.org/debian/ lenny main
deb http://security.debian.org/ lenny/updates main
debootstrap command used (/min is going to be chrooted)
-------------------------------------------------------
debootstrap lenny /min http://ftp.nl.debian.org/debian
Ubuntu livesystem mounts used for installation
----------------------------------------------
mount --bind /dev /min/dev
mount -t proc proc /min/proc
mount -t sysfs sysfs /min/sys
Kernel used
-----------
server01:~# uname -a
Linux server01 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686 GNU/Linux
server01:~# dpkg -l | grep linux-image
ii linux-image-2.6.26-1-686 2.6.26-13 Linux 2.6.26 image on PPro/Celeron/PII/PIII/
ii linux-image-686 2.6.26+17 Linux image on PPro/Celeron/PII/PIII/P4
GRUB menu entry (no extra options)
----------------------------------
title Debian GNU/Linux, kernel 2.6.26-1-686
root (hd0,0)
kernel /vmlinuz-2.6.26-1-686 root=/dev/sda2 ro
initrd /initrd.img-2.6.26-1-686
Hardware info
-------------
server01:~# lspci
00:00.0 Host bridge: Intel Corporation 82860 860 (Wombat) Chipset Host Bridge (MCH) (rev 04)
00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge (rev 04)
00:02.0 PCI bridge: Intel Corporation 82860 860 (Wombat) Chipset AGP Bridge (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 04)
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 Controller (rev 04)
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 04)
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus Controller (rev 04)
00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 04)
02:1f.0 PCI bridge: Intel Corporation 82806AA PCI64 Hub PCI Bridge (rev 03)
03:00.0 PIC: Intel Corporation 82806AA PCI64 Hub Advanced Programmable Interrupt Controller (rev 01)
03:07.0 SCSI storage controller: QLogic Corp. ISP12160 Dual Channel Ultra3 SCSI Processor (rev 06)
04:04.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 0c)
04:09.0 VGA compatible controller: S3 Inc. 86c868 [Vision 868 VRAM] vers 0
You can find dmesg output in the attachment.
If you need more, just ask.
Regards,
Jacco
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00f50f0] 000f50f0
[ 0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524272
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524272
[ 0.000000] On node 0 totalpages: 524272
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2304 pages used for memmap
[ 0.000000] HighMem zone: 292592 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F6D70, 0014 (r0 IntelR)
[ 0.000000] ACPI: RSDT 7FFF3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 7FFF3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 7FFF30C0, 39F0 (r1 INTELR AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 7FFF0000, 0040
[ 0.000000] ACPI: APIC 7FFF6AC0, 0078 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DMI detected: Fujitsu Siemens
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520176
[ 0.000000] Kernel command line: root=/dev/sda2 ro
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] mapped IOAPIC to ffff9000 (fec80000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2205.105 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 2068792k/2097088k available (1769k kernel code, 27024k reserved, 752k data, 244k init, 1179584k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba4ab - 0xc0376620 ( 752 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba4ab (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084191] Calibrating delay using timer specific routine.. 4415.50 BogoMIPS (lpj=8831014)
[ 0.084373] Security Framework initialized
[ 0.084442] SELinux: Disabled at boot.
[ 0.084505] Capability LSM initialized
[ 0.084589] Mount-cache hash table entries: 512
[ 0.084918] Initializing cgroup subsys ns
[ 0.084984] Initializing cgroup subsys cpuacct
[ 0.085047] Initializing cgroup subsys devices
[ 0.085140] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.085245] CPU: L2 cache: 512K
[ 0.085305] CPU: Physical Processor ID: 0
[ 0.085367] Intel machine check architecture supported.
[ 0.085433] Intel machine check reporting enabled on CPU#0.
[ 0.085497] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[ 0.085562] CPU0: Thermal monitoring enabled
[ 0.085643] Checking 'hlt' instruction... OK.
[ 0.102230] ACPI: Core revision 20080321
[ 0.115915] ENABLING IO-APIC IRQs
[ 0.116007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.155832] CPU0: Intel(R) XEON(TM) CPU 2.20GHz stepping 04
[ 0.156009] Booting processor 1/1 ip 6000
[ 0.164010] Initializing CPU#1
[ 0.164010] Calibrating delay using timer specific routine.. 4410.37 BogoMIPS (lpj=8820748)
[ 0.164010] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.164010] CPU: L2 cache: 512K
[ 0.164010] CPU: Physical Processor ID: 3
[ 0.164010] Intel machine check architecture supported.
[ 0.164010] Intel machine check reporting enabled on CPU#1.
[ 0.164010] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
[ 0.164010] CPU1: Thermal monitoring enabled
[ 0.243980] CPU1: Intel(R) XEON(TM) CPU 2.20GHz stepping 04
[ 0.244015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.248015] Booting processor 2/2 ip 6000
[ 0.256016] Initializing CPU#2
[ 0.256016] Calibrating delay using timer specific routine.. 4410.35 BogoMIPS (lpj=8820717)
[ 0.256016] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.256016] CPU: L2 cache: 512K
[ 0.256016] CPU: Physical Processor ID: 0
[ 0.256016] Intel machine check architecture supported.
[ 0.256016] Intel machine check reporting enabled on CPU#2.
[ 0.256016] CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
[ 0.256016] CPU2: Thermal monitoring enabled
[ 0.339001] CPU2: Intel(R) XEON(TM) CPU 2.20GHz stepping 04
[ 0.339745] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.344021] Booting processor 3/3 ip 6000
[ 0.352022] Initializing CPU#3
[ 0.352022] Calibrating delay using timer specific routine.. 4410.35 BogoMIPS (lpj=8820716)
[ 0.352022] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.352022] CPU: L2 cache: 512K
[ 0.352022] CPU: Physical Processor ID: 3
[ 0.352022] Intel machine check architecture supported.
[ 0.352022] Intel machine check reporting enabled on CPU#3.
[ 0.352022] CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
[ 0.352022] CPU3: Thermal monitoring enabled
[ 0.434774] CPU3: Intel(R) XEON(TM) CPU 2.20GHz stepping 04
[ 0.435471] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.440027] Brought up 4 CPUs
[ 0.440027] Total of 4 processors activated (17646.59 BogoMIPS).
[ 0.440027] CPU0 attaching sched-domain:
[ 0.440027] domain 0: span 0,2
[ 0.440027] groups: 0 2
[ 0.440027] domain 1: span 0-3
[ 0.440027] groups: 0,2 1,3
[ 0.440027] CPU1 attaching sched-domain:
[ 0.440027] domain 0: span 1,3
[ 0.440027] groups: 1 3
[ 0.440027] domain 1: span 0-3
[ 0.440027] groups: 1,3 0,2
[ 0.440027] CPU2 attaching sched-domain:
[ 0.440027] domain 0: span 0,2
[ 0.440027] groups: 2 0
[ 0.440027] domain 1: span 0-3
[ 0.440027] groups: 0,2 1,3
[ 0.440027] CPU3 attaching sched-domain:
[ 0.440027] domain 0: span 1,3
[ 0.440027] groups: 3 1
[ 0.440027] domain 1: span 0-3
[ 0.440027] groups: 1,3 0,2
[ 0.440027] net_namespace: 660 bytes
[ 0.440027] Booting paravirtualized kernel on bare hardware
[ 0.440027] NET: Registered protocol family 16
[ 0.440027] ACPI: bus type pci registered
[ 0.470305] PCI: PCI BIOS revision 2.10 entry at 0xfb170, last bus=4
[ 0.470370] PCI: Using configuration type 1 for base access
[ 0.470448] Setting up standard PCI resources
[ 0.475491] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.475491] mtrr: probably your BIOS does not setup all CPUs.
[ 0.475491] mtrr: corrected configuration.
[ 0.476510] ACPI: EC: Look up EC in DSDT
[ 0.484243] ACPI: Interpreter enabled
[ 0.484309] ACPI: (supports S0 S1 S4 S5)
[ 0.484560] ACPI: Using IOAPIC for interrupt routing
[ 0.491492] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.491750] pci 0000:00:1f.0: quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
[ 0.491829] pci 0000:00:1f.0: quirk: region 4080-40bf claimed by ICH4 GPIO
[ 0.494402] PCI: Transparent bridge - 0000:00:1e.0
[ 0.494506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.494825] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.517203] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.517203] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 0.517203] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.518028] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.521900] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.522622] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.523438] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.524257] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
[ 0.528346] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.528346] pnp: PnP ACPI init
[ 0.528346] ACPI: bus type pnp registered
[ 0.528346] pnp 00:00: mem resource (0xca800-0xcbfff) overlaps 0000:04:09.0 BAR 0 (0x0-0x3ffffff), disabling
[ 0.528346] pnp 00:00: mem resource (0xf0000-0xf7fff) overlaps 0000:04:09.0 BAR 0 (0x0-0x3ffffff), disabling
[ 0.528346] pnp 00:00: mem resource (0xf8000-0xfbfff) overlaps 0000:04:09.0 BAR 0 (0x0-0x3ffffff), disabling
[ 0.528346] pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:04:09.0 BAR 0 (0x0-0x3ffffff), disabling
[ 0.528346] pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:04:09.0 BAR 0 (0x0-0x3ffffff), disabling
[ 0.528346] pnp 00:00: mem resource (0x100000-0x7ffeffff) overlaps 0000:04:09.0 BAR 0 (0x0-0x3ffffff), disabling
[ 0.528346] pnp 00:00: mem resource (0xe0000-0xeffff) overlaps 0000:04:09.0 BAR 0 (0x0-0x3ffffff), disabling
[ 0.533926] pnp: PnP ACPI: found 10 devices
[ 0.533926] ACPI: ACPI bus type pnp unregistered
[ 0.533926] PnPBIOS: Disabled by ACPI PNP
[ 0.533926] PCI: Using ACPI for IRQ routing
[ 0.543365] ACPI: RTC can wake from S4
[ 0.547287] system 00:00: iomem range 0x7fff0000-0x7fffffff could not be reserved
[ 0.547364] system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 0.547440] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.550083] system 00:00: iomem range 0xffb00000-0xffb7ffff could not be reserved
[ 0.550160] system 00:00: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.550246] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.583491] PCI: Bridge: 0000:00:01.0
[ 0.583552] IO window: disabled.
[ 0.583615] MEM window: disabled.
[ 0.583675] PREFETCH window: disabled.
[ 0.583742] PCI: Bridge: 0000:02:1f.0
[ 0.583802] IO window: 9000-9fff
[ 0.583865] MEM window: 0xf8000000-0xf9ffffff
[ 0.583929] PREFETCH window: 0x0000000088000000-0x00000000880fffff
[ 0.583998] PCI: Bridge: 0000:00:02.0
[ 0.584059] IO window: 9000-9fff
[ 0.584121] MEM window: 0xf8000000-0xf9ffffff
[ 0.584183] PREFETCH window: 0x0000000088000000-0x00000000880fffff
[ 0.584255] PCI: Bridge: 0000:00:1e.0
[ 0.584315] IO window: a000-afff
[ 0.584378] MEM window: 0xec000000-0xf7ffffff
[ 0.584441] PREFETCH window: 0x0000000088100000-0x00000000881fffff
[ 0.584529] PCI: Setting latency timer of device 0000:02:1f.0 to 64
[ 0.584541] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.584607] NET: Registered protocol family 2
[ 0.598435] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.599018] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.600266] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.601045] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.601118] TCP reno registered
[ 0.606507] NET: Registered protocol family 1
[ 0.606776] checking if image is initramfs... it is
[ 1.083501] Switched to high resolution mode on CPU 1
[ 1.083009] Switched to high resolution mode on CPU 3
[ 1.083507] Switched to high resolution mode on CPU 2
[ 1.085828] Switched to high resolution mode on CPU 0
[ 1.350576] Freeing initrd memory: 6395k freed
[ 1.350576] audit: initializing netlink socket (disabled)
[ 1.350576] type=2000 audit(1236894138.332:1): initialized
[ 1.350576] highmem bounce pool size: 64 pages
[ 1.350576] Total HugeTLB memory allocated, 0
[ 1.350576] VFS: Disk quotas dquot_6.5.1
[ 1.350576] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.350576] msgmni has been set to 1750
[ 1.354577] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.354577] io scheduler noop registered
[ 1.354577] io scheduler anticipatory registered
[ 1.354577] io scheduler deadline registered
[ 1.354577] io scheduler cfq registered (default)
[ 1.354577] pci 0000:04:04.0: Firmware left e100 interrupts enabled; disabling
[ 1.354577] pci 0000:04:09.0: Boot video device
[ 1.354577] isapnp: Scanning for PnP cards...
[ 1.709868] isapnp: No Plug & Play device found
[ 1.717786] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.728780] brd: module loaded
[ 1.728780] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.728780] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.728780] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.728780] mice: PS/2 mouse device common for all mice
[ 1.728780] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.728780] rtc0: alarms up to one month
[ 1.728780] cpuidle: using governor ladder
[ 1.728780] cpuidle: using governor menu
[ 1.728780] No iBFT detected.
[ 1.728780] TCP cubic registered
[ 1.728789] NET: Registered protocol family 17
[ 1.728823] Using IPI No-Shortcut mode
[ 1.728823] registered taskstats version 1
[ 1.728823] rtc_cmos 00:05: setting system clock to 2009-03-12 21:42:19 UTC (1236894139)
[ 1.728823] Freeing unused kernel memory: 244k freed
[ 1.747552] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.910019] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.910019] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.910019] ACPI: ACPI0007:02 is registered as cooling_device2
[ 1.910019] ACPI: ACPI0007:03 is registered as cooling_device3
[ 2.216706] Uniform Multi-Platform E-IDE driver
[ 2.216706] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2.216706] usbcore: registered new interface driver usbfs
[ 2.216706] usbcore: registered new interface driver hub
[ 2.247061] usbcore: registered new device driver usb
[ 2.258596] ICH2: IDE controller (0x8086:0x244b rev 0x04) at PCI slot 0000:00:1f.1
[ 2.258730] ICH2: not 100% native mode: will probe irqs later
[ 2.258824] ide0: BM-DMA at 0xf000-0xf007
[ 2.258909] ide1: BM-DMA at 0xf008-0xf00f
[ 2.258991] Probing IDE interface ide0...
[ 2.271870] USB Universal Host Controller Interface driver v3.0
[ 2.324858] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 2.324947] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.375186] SCSI subsystem initialized
[ 2.861653] Probing IDE interface ide1...
[ 3.686910] hdc: ATAPI CD-ROM DRIVE 36X MAXIMUM, ATAPI CD/DVD-ROM drive
[ 4.078475] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.078667] hdc: UDMA/33 mode selected
[ 4.078915] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.082907] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.137206] hdc: task_in_intr: status=0x58 { DriveReady SeekComplete DataRequest }
[ 4.137206] ide: failed opcode was: 0xa1
[ 4.140183] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 19
[ 4.140183] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.140183] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 4.140183] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 4.140183] uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000b000
[ 4.140183] usb usb1: configuration #1 chosen from 1 choice
[ 4.140183] hub 1-0:1.0: USB hub found
[ 4.140183] hub 1-0:1.0: 2 ports detected
[ 4.144732] No dock devices found.
[ 4.163407] libata version 3.00 loaded.
[ 4.250555] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.250555] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.250555] usb usb1: Product: UHCI Host Controller
[ 4.250555] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 4.250555] usb usb1: SerialNumber: 0000:00:1f.2
[ 4.270557] ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 23
[ 4.270557] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 4.270557] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 4.270557] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 4.270557] uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000b800
[ 4.270557] usb usb2: configuration #1 chosen from 1 choice
[ 4.270557] hub 2-0:1.0: USB hub found
[ 4.270557] hub 2-0:1.0: 2 ports detected
[ 4.374550] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.374550] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.374550] usb usb2: Product: UHCI Host Controller
[ 4.374550] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 4.374550] usb usb2: SerialNumber: 0000:00:1f.4
[ 4.377134] qla1280: QLA12160 found on PCI bus 3, dev 7
[ 4.374550] ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.377134] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 4.377134] scsi(0): Reading NVRAM
[ 4.464559] e100: eth0: e100_probe: addr 0xf4020000, irq 16, MAC addr 00:d0:68:01:01:36
[ 4.622255] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 4.790349] usb 2-1: configuration #1 chosen from 1 choice
[ 4.790693] hub 2-1:1.0: USB hub found
[ 4.794353] hub 2-1:1.0: 4 ports detected
[ 4.931599] usb 2-1: New USB device found, idVendor=0416, idProduct=5518
[ 4.931673] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.931743] usb 2-1: Product: USB HUB
[ 12.802067] scsi(0:0): Resetting SCSI BUS
[ 19.165763] scsi(0:1): Resetting SCSI BUS
[ 25.385836] scsi0 : QLogic QLA12160 PCI to SCSI Host Adapter
[ 25.385838] Firmware version: 10.04.42, Driver version 3.26
[ 25.908928] scsi 0:0:0:0: Direct-Access SEAGATE ST3146707LC D701 PQ: 0 ANSI: 3
[ 25.908928] scsi(0:0:0:0): Sync: period 9, offset 24, Wide, DT, Tagged queuing: depth 255
[ 25.919898] hdc: ATAPI 32X CD-ROM drive, 128kB Cache
[ 25.920932] Uniform CD-ROM driver Revision: 3.20
[ 39.130678] Driver 'sd' needs updating - please use bus_type methods
[ 39.157130] sd 0:0:0:0: [sda] 286749480 512-byte hardware sectors (146816 MB)
[ 39.160430] sd 0:0:0:0: [sda] Write Protect is off
[ 39.160430] sd 0:0:0:0: [sda] Mode Sense: ab 00 10 08
[ 39.160430] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 39.160430] sd 0:0:0:0: [sda] 286749480 512-byte hardware sectors (146816 MB)
[ 39.161862] sd 0:0:0:0: [sda] Write Protect is off
[ 39.161862] sd 0:0:0:0: [sda] Mode Sense: ab 00 10 08
[ 39.161862] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 39.161862] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 39.166992] sd 0:0:0:0: [sda] Attached SCSI disk
[ 39.453877] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[ 39.453877] SGI XFS Quota Management subsystem
[ 39.478132] XFS mounting filesystem sda2
[ 39.594743] Ending clean XFS mount for filesystem: sda2
[ 40.916997] udevd version 125 started
[ 41.551810] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 41.576794] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 41.587054] EDAC MC: Ver: 2.1.0 Jan 10 2009
[ 41.643523] EDAC i82860: i82860 init one
[ 41.643523] EDAC MC0: Giving out device to 'i82860_edac' 'i82860': DEV 0000:00:00.0
[ 41.643523] EDAC PCI0: Giving out device to module 'i82860_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[ 41.691673] Linux agpgart interface v0.103
[ 41.955788] Intel 82802 RNG detected
[ 41.993028] input: Power Button (FF) as /class/input/input1
[ 42.046263] ACPI: Power Button (FF) [PWRF]
[ 42.046474] input: Power Button (CM) as /class/input/input2
[ 42.053037] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 42.053037] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 42.053037] iTCO_wdt: No card detected
[ 42.110586] ACPI: Power Button (CM) [PWRB]
[ 42.245738] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 42.331680] input: PC Speaker as /class/input/input3
[ 42.406266] parport_pc 00:08: reported by Plug and Play ACPI
[ 42.406266] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 42.488968] Error: Driver 'pcspkr' is already registered, aborting...
[ 42.945315] Adding 2008116k swap on /dev/sda3. Priority:-1 extents:1 across:2008116k
[ 43.454694] lp0: using parport0 (interrupt-driven).
[ 43.519386] ACPI: WMI: Mapper loaded
[ 43.728214] device-mapper: uevent: version 1.0.3
[ 43.728214] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 291.392834] padlock: VIA PadLock not detected.
[ 291.588981] padlock: VIA PadLock Hash Engine not detected.
[ 292.228747] kjournald starting. Commit interval 5 seconds
[ 292.229344] EXT3 FS on sda1, internal journal
[ 292.229462] EXT3-fs: mounted filesystem with ordered data mode.
[ 292.622640] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Reply to: