Bug#516911: Wrong kernel installed at K7 architecture
Package: installation-reports
Boot method: CD
Image version: Self-made boot CD with Lenny Debian Installer 5.0.0
Date: 2009-02-23
Machine: Self-made Desktop PC
Processor: AMD Duron 800MHz
Memory: 256MB
Partitions: <df -Tl will do; the raw partition table is preferred>
> Dateisystem Typ 1K‐Blöcke Benutzt Verfügbar Ben% Eingehängt auf
> /dev/hda1 ext3 1921156 635360 1188204 35% /
> tmpfs tmpfs 128284 4 128280 1% /lib/init/rw
> udev tmpfs 10240 84 10156 1% /dev
> tmpfs tmpfs 128284 0 128284 0% /dev/shm
> /dev/hda5 xfs 77443576 26133228 51310348 34% /storage1
> /dev/hdb5 xfs 244076732 160107184 83969548 66% /storage2
Output of lspci -knn:
> 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 735 Host [1039:0735] (rev 01)
> Kernel driver in use: agpgart-sis
> Kernel modules: sis-agp
> 00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) [1039:0001]
> Kernel modules: shpchp
> 00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) [1039:0018]
> Kernel modules: i2c-sis630
> 00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller [1039:0016]
> Kernel driver in use: sis96x_smbus
> Kernel modules: i2c-sis96x
> 00:02.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 07)
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
> 00:02.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 07)
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
> 00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (rev d0)
> Kernel driver in use: SIS_IDE
> Kernel modules: sis5513
> 00:0f.0 Network controller [0280]: RaLink RT2500 802.11g Cardbus/mini-PCI [1814:0201] (rev 01)
> Kernel driver in use: rt2500pci
> Kernel modules: rt2500pci
> 00:11.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10)
> Kernel driver in use: r8169
> Kernel modules: r8169
> 00:13.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 50)
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
> 00:13.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 50)
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
> 00:13.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 51)
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
> 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage 128 RF/SG AGP [1002:5246]
> Kernel modules: aty128fb
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [E]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
The used architecture is a K7 architecture (AMD Duron 800MHz).
The kernel has to be the 686 image.
But there is the 486 image installed.
Regards
Bernhard
Reply to: