[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#513649: marked as done (installation-reports: No problems on Compaq Evo N600c)

Your message dated Sat, 31 Jan 2009 08:28:45 +0100
with message-id <20090131072845.GN7720@mykerinos.kheops.frmug.org>
and subject line Re: Bug#513649: installation-reports: No problems on Compaq Evo N600c
has caused the Debian Bug report #513649,
regarding installation-reports: No problems on Compaq Evo N600c
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
513649: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=513649
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

Boot method: netinst CD
Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso 
		DISTRIB_RELEASE="5.0 (lenny) - installer build 20090122-10:02"
Date: Jan 2009/01/22 13:00

Machine: Compaq Evo N600c
Processor: Intel Pentium III Mobile CPU 1200 MHz
Memory: 512 MB
Partitions:

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1        2432    19535008+   7  HPFS/NTFS
/dev/hda2            2433        4864    19535040   83  Linux
/dev/hda3            4865        4986      979965   82  Linux swap / Solaris
/dev/hda4            4987        7296    18555075    5  Extended
/dev/hda5            4987        7296    18555043+  83  Linux

Output of lspci -nn and lspci -vnn:

# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82830 830 Chipset Host Bridge [8086:3575] (rev 02)
00:01.0 PCI bridge [0604]: Intel Corporation 82830 830 Chipset AGP Bridge [8086:3576] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #1 [8086:2482] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #2 [8086:2484] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #3 [8086:2487] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 41)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801CAM ISA Bridge (LPC) [8086:248c] (rev 01)
00:1f.1 IDE interface [0101]: Intel Corporation 82801CAM IDE U100 Controller [8086:248a] (rev 01)
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility M6 LY [1002:4c59]
02:03.0 CardBus bridge [0607]: Texas Instruments PCI1420 PC card Cardbus Controller [104c:ac51]
02:03.1 CardBus bridge [0607]: Texas Instruments PCI1420 PC card Cardbus Controller [104c:ac51]
02:04.0 Communication controller [0780]: Agere Systems LT WinModem [11c1:0450] (rev 02)
02:08.0 Ethernet controller [0200]: Intel Corporation 82801CAM (ICH3) PRO/100 VM (KM) Ethernet Controller [8086:1038] (rev 41)
02:09.0 Multimedia audio controller [0401]: ESS Technology ES1988 Allegro-1 [125d:1988] (rev 12)
04:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor [168c:0013] (rev 01)

# lspci -vnn
00:00.0 Host bridge [0600]: Intel Corporation 82830 830 Chipset Host Bridge [8086:3575] (rev 02)
	Subsystem: Compaq Computer Corporation Evo N600c [0e11:0030]
	Flags: bus master, fast devsel, latency 0
	Memory at 60000000 (32-bit, prefetchable) [size=256M]
	Capabilities: [40] Vendor Specific Information <?>
	Capabilities: [a0] AGP version 2.0
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 82830 830 Chipset AGP Bridge [8086:3576] (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, 66MHz, fast devsel, latency 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: 40200000-402fffff
	Prefetchable memory behind bridge: 48000000-4fffffff
	Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #1 [8086:2482] (rev 01) (prog-if 00 [UHCI])
	Subsystem: Compaq Computer Corporation Evo N600c [0e11:0030]
	Flags: bus master, medium devsel, latency 0, IRQ 11
	I/O ports at 4000 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #2 [8086:2484] (rev 01) (prog-if 00 [UHCI])
	Subsystem: Compaq Computer Corporation Evo N600c [0e11:0030]
	Flags: bus master, medium devsel, latency 0, IRQ 11
	I/O ports at 4020 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #3 [8086:2487] (rev 01) (prog-if 00 [UHCI])
	Subsystem: Compaq Computer Corporation Evo N600c [0e11:0030]
	Flags: bus master, medium devsel, latency 0, IRQ 11
	I/O ports at 4040 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 41) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=07, sec-latency=32
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 40000000-401fffff
	Kernel modules: shpchp

00:1f.0 ISA bridge [0601]: Intel Corporation 82801CAM ISA Bridge (LPC) [8086:248c] (rev 01)
	Flags: bus master, medium devsel, latency 0
	Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface [0101]: Intel Corporation 82801CAM IDE U100 Controller [8086:248a] (rev 01) (prog-if 8a [Master SecP PriP])
	Subsystem: Compaq Computer Corporation Evo N600c [0e11:0030]
	Flags: bus master, medium devsel, latency 0, IRQ 11
	I/O ports at 01f0 [size=8]
	I/O ports at 03f4 [size=1]
	I/O ports at 0170 [size=8]
	I/O ports at 0374 [size=1]
	I/O ports at 4060 [size=16]
	Memory at 30000000 (32-bit, non-prefetchable) [size=1K]
	Kernel driver in use: PIIX_IDE
	Kernel modules: piix

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility M6 LY [1002:4c59] (prog-if 00 [VGA controller])
	Subsystem: Compaq Computer Corporation Evo N600c [0e11:b111]
	Flags: bus master, stepping, 66MHz, medium devsel, latency 66, IRQ 11
	Memory at 48000000 (32-bit, prefetchable) [size=128M]
	I/O ports at 3000 [size=256]
	Memory at 40200000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at 40220000 [disabled] [size=128K]
	Capabilities: [58] AGP version 2.0
	Capabilities: [50] Power Management version 2
	Kernel modules: radeonfb

02:03.0 CardBus bridge [0607]: Texas Instruments PCI1420 PC card Cardbus Controller [104c:ac51]
	Subsystem: Compaq Computer Corporation Evo N600c [0e11:004e]
	Flags: bus master, medium devsel, latency 168, IRQ 11
	Memory at 40000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
	Memory window 0: 30400000-307ff000 (prefetchable)
	Memory window 1: 34000000-37fff000
	I/O window 0: 00002c00-00002cff
	I/O window 1: 00001400-000014ff
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket

02:03.1 CardBus bridge [0607]: Texas Instruments PCI1420 PC card Cardbus Controller [104c:ac51]
	Subsystem: Compaq Computer Corporation Evo N600c [0e11:004e]
	Flags: bus master, medium devsel, latency 168, IRQ 11
	Memory at 40080000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=04, subordinate=07, sec-latency=176
	Memory window 0: 30800000-30bff000 (prefetchable)
	Memory window 1: 38000000-3bfff000
	I/O window 0: 00001800-000018ff
	I/O window 1: 00001c00-00001cff
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket

02:04.0 Communication controller [0780]: Agere Systems LT WinModem [11c1:0450] (rev 02)
	Subsystem: AMBIT Microsystem Corp. Evo N600c [1468:0450]
	Flags: bus master, medium devsel, latency 66, IRQ 11
	Memory at 40180000 (32-bit, non-prefetchable) [size=256]
	I/O ports at 2840 [size=8]
	I/O ports at 2000 [size=256]
	Capabilities: [f8] Power Management version 2

02:08.0 Ethernet controller [0200]: Intel Corporation 82801CAM (ICH3) PRO/100 VM (KM) Ethernet Controller [8086:1038] (rev 41)
	Subsystem: Compaq Computer Corporation Evo N600c [0e11:0098]
	Flags: bus master, medium devsel, latency 66, IRQ 11
	Memory at 40100000 (32-bit, non-prefetchable) [size=4K]
	I/O ports at 2800 [size=64]
	Capabilities: [dc] Power Management version 2
	Kernel driver in use: e100
	Kernel modules: e100, eepro100

02:09.0 Multimedia audio controller [0401]: ESS Technology ES1988 Allegro-1 [125d:1988] (rev 12)
	Subsystem: Compaq Computer Corporation Device [0e11:0094]
	Flags: medium devsel, IRQ 11
	I/O ports at 2400 [size=256]
	Capabilities: [c0] Power Management version 2
	Kernel modules: snd-maestro3

04:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor [168c:0013] (rev 01)
	Subsystem: PROXIM Inc Device [14b7:0a40]
	Flags: bus master, medium devsel, latency 96, IRQ 11
	Memory at 30800000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: [44] Power Management version 2
	Kernel driver in use: ath_pci
	Kernel modules: ath_pci, ath5k


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [O]

Comments/Problems:

No problems.

Graphical install.

hda1 contained Windows XP.  hda2 contained Debian Etch.  This installation
was to hda5.  Grub was set up correctly to multiboot the three systems.

--- End Message ---
--- Begin Message --- 
Quoting John.Franzini@bigrock.us (johnfranzini@comcast.net):

> Base System Installation Checklist:
> [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
> 
> Initial boot:           [O]
> Detect network card:    [O]
> Configure network:      [O]
> Detect CD:              [O]
> Load installer modules: [O]
> Detect hard drives:     [O]
> Partition hard drives:  [O]
> Install base system:    [O]
> Clock/timezone setup:   [O]
> User/password setup:    [O]
> Install tasks:          [O]
> Install boot loader:    [O]
> Overall install:        [O]
> 
> Comments/Problems:
> 
> No problems.
> 
> Graphical install.
> 
> hda1 contained Windows XP.  hda2 contained Debian Etch.  This installation
> was to hda5.  Grub was set up correctly to multiboot the three systems.

Thanks for your report.

Would you mind trying to test one of the images from
http://cdimage.debian.org/cdimage/.lenny_bibble/ ;?

These are the candidate images for the lenny release so it's quite
important for us to get feedback.

In understand that means reinstalling the machine you just installed,
but any test is welcomed..:-)

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: